Costume "Rose" - a master class. Hat - a flower with your own hands for dancing in kindergarten Flower costume for the new year

Svetlana Shmykova

For one cap of roses

1.We'll need:

Paper sheet A2 (red cardboard of the same size is even better, a roll of red crepe paper (choose a shade of your choice), scissors, centimeter, ruler, pencil, glue stick, stapler

2. Cut off paper (cardboard)4 strips 5 cm wide:

1 strip - length 55-58cm,

3 strips - 30 cm long.

3. We connect a long strip into a ring according to the volume of the head and fasten it with a stapler.

! We carry out all fastenings with a stapler so that the tips of the paper clips are outside (otherwise they will get caught in the hair later).

4. We form the upper part of the cap with short strips, attaching them alternately to the ring.

5. Let's start making rose petals. We take crepe paper, arrange it so that the grain is in a vertical direction. We measure 50 cm long, 12 cm wide, bend

6. And cut off. It turned out a double stripe 50 * 12 in size. In the same way, we make double stripes with a size: 60*14, 70*16, 80*18, 90*20.

When cutting the strips, in order to save paper, the strips can also be folded horizontally (then you should double the length of the strip).

! Make sure the grain stays vertical.

7. Now all the strips need to be glued. We take a strip, unfold it, spread one half with glue stick

and glue with the second half of the strip. So glue each of the remaining strips.

8. We begin to cut out the petals. We fold the narrowest strip into 5 equal parts and cut out a symmetrical petal

resulting in 5.

In the same way, we cut out the petals from the next strip in size.

9. From the remaining pieces of paper, cut the fringe and glue it "panicle" on top of a hat (you can use trim after cutting the petals).

10.Give the petals a natural look: we pinch the petal between the thumbs and forefingers and stretch a little from the middle to the edges. We give the petal a cup-shaped shape.

11. Stretch the upper part of the petal.

Now he is alive! Animate the remaining cut petals. Do not be upset if you suddenly do not calculate the forces a little and the paper will tear - grease the torn edges with glue and glue a little overlap.

12. Glue the first layer of petals (those from the front page). Glue the lower edge of the petal with glue and glue it on the hat, placing the upper edge of the petal a little higher "panicles".

Glue the remaining 4 petals at the same height in a circle.

13. Glue the petal of the second strip, placing it between the petals of the first row and 2 - 2.5 cm below. The remaining 4 petals also lie in a circle.

14. Cut out 5 petals from the third strip, rounding only the upper corners. Give them a bowl shape. We wind the upper right part onto a pencil at an angle of 45 towards the convex part of the petal

slightly stretch the paper between your fingers along the pencil. We take out the pencil and curl the left edge of the petal.

15. Glue the petals on the cap in a checkerboard pattern below the previous row.

16. Cut out the petals from the last strip, form, curl and glue them at the level of the bottom edge of the hat.

Rose is almost ready!

17. Cut out the petals of the sepals - Fold the green paper 2 times into hits and cut out a symmetrical leaf.

18. We make a small incision in the middle,

19. glue it with an overlap, giving the sepal volume.

20. ... and glue them on the sides and back.

Our rose has blossomed!

21. LEAVES - MITTENS

sew from raincoat fabric of green color and dublerin.

We glue one layer with dublerin. We put our palm and draw a jagged leaf around it. In the middle of the leaf we draw veins that we sew on sewing machine seam "zigzag". We put another layer of fabric on the side of the dublerin and fix it with needles. Seam "zigzag" we sew the jagged edge of the leaf - we do not sew the bottom edge (so that you can put it on your hand). Now left "cut out" leaf with a burner. One leaf is ready. We do the second one in the same way. To make the mitten sit on the hand, we sew an elastic band to the bottom edge from the inside.

Master class "Hat-flower made of paper" - an attribute for the dance of girls at the Spring Ball in kindergarten

Stepanova Galina Alexandrovna, educator of the MADOU "Child Development Center - Kindergarten No. 4", Kamyshlov
Material Description: I bring to your attention a master class on making an attribute for dancing girls at a matinee in kindergarten - a hat "Flower". This material will be useful to kindergarten teachers, parents, teachers of additional education.

Materials: colored napkins (preferably 2, 3-layer), cardboard, thread, glue, scissors, stapler, glue gun.

Flowers are considered the best gift for all women. At the Spring Ball in kindergarten, a holiday where mothers and grandmothers of our pupils will receive congratulations, the girls from my group will turn into flowers. The idea of ​​the flower dance is simple: flower girls grow in a flower bed, which is looked after by a gardener. The gardener is trying very hard: watering the flowers, removing weeds from the flower bed (2-3 boys in green clothes). Then tired, sits down on a bench to rest. "Flowers" (girls) - begin to grow, rise, reach for the sun, come into motion.
For brilliance, entertainment of the dance, flower caps will be put on the heads of the girls.
First stage: making flowers from paper napkins.
We unfold the napkins, lay them on top of each other. The recommended quantity for multilayer napkins is 5 pieces. For single-layer - up to 8 pieces.

We fold the "accordion" from napkins, which we drag in the middle with threads. Try not to tighten it too tight so that the napkins do not tear. We take scissors and cut off the ends of the "accordion" around the circumference.

We straighten the ends of the "accordion" so that we get a "butterfly"

Raise up and to the center the first layer of napkins. The flower is starting to form. Then lift up the next layer of petals. We continue to raise the petals to the last. We try to act carefully, as thin napkins do not hold their shape well and can tear.

Second phase: base manufacturing. A standard sheet of cardboard is cut into strips 4-5 cm wide. To make the base of one hat, 4 strips are needed.

Two strips of cardboard are glued into one, folded in a circle, glued again. From above we glue the remaining 2 strips superimposed on each other crosswise. You can fix the cardboard with a stapler or glue gun.

Third stage: Decor. On the finished basis of the cap, you need to fix 5 flowers from napkins. You can use glue "Moment" or a glue gun.

Trying on! Do not forget to "customize" the hat to the size of the child's head. To do this, I propose to fix the circular base first with a paper clip and glue it only after trying it on.

Thank you for your attention!

Approaching New Year and you just need to dress up your beauty in a beautiful new Year costume. So why not make an elegant and very beautiful flower costume for your girl with your own hands. In this carnival outfit New Year's party your baby will look bright and delightful. And in 10 years when your child will be browsing new year photos, she will know that her mother sewed this costume for her with her own hands ...

How to make (sew) a New Year's flower costume: step by step

To sew a suit you will need:

• cardboard,
• green cloth,
• pink cloth,
• yellow fabric.

Let's look at the picture:

Fig1. We sew a vest or a simple flyaway.

Fig2. We sew pants or shorten ready-made sports light green.

Fig3. We cut out large leaves from cardboard for our “flower”. We cover them with fabric and sew them to the neck of the vest.

Fig4. From the yellow material we cut out a long bandage. Cut out as many petals from cardboard as you have them on the bandage. Each petal is covered with pink fabric. We sew alternately the petals around the perimeter of the bandage. In order for the petals not to fall apart, we sew them to each other. The bandage is ready!

So the flower costume is ready! Now your child will surprise everyone at the matinee!