Knitted slippers homemade with knitting needles. Knitting slippers with knitting needles. Video: How to crochet men's slippers

There are many patterns according to which warm slippers are knitted using only two knitting needles. In the master class we will talk about simple ways perfect for beginner crafters.


House slippers on two spokes with plaits

The lesson will help you master the production of spectacular slippers for the following sizes:

  1. 35/37 - foot 22 cm.
  2. 38/39-24 cm.
  3. 40/42-26 cm.

The model knits easily because it is made with two knitting needles. This option is perfect for a beginner needlewoman. Here, a garter stitch pattern is used, as well as a braid according to the patterns, for the left slipper it is A1, for the right one it is A2. The diagram shows that the pattern depends on the size of the shoe. Gauge is 13 stitches and 26 rows in a 10 x 10 cm pattern.

Materials and tools:

  1. Mixed yarn (100 g/100 m), 100 grams.
  2. Knitting needles straight and circular No. 5.
  3. Additional needle.
  4. Two pins.

Description of needlework step by step:

  1. For the left slipper, dial 36/38/40 loops. You need to start with a garter stitch, doing 4 cm.
  2. Continue on the first 11/13/13 sts, leaving the rest on a spare needle.
  3. In the first row, all front loops (LP).
  4. Add 2 to 2.
  5. Add 2 to 3.
  6. Follow the fourth row according to scheme A1, with edging along the edges.
  7. Knit according to the pattern until the fabric height is 6.5 / 9 / 9.5 cm.
  8. On the last row, decrease so that there are 11/13/13 loops on the needles.

You have the stitches on the extra needle and the top knit zone. Raise the hem of the sides of the top, on each side 12/14/16 pieces. In total, you get 60/66/72 loops. Continue shaping the slippers, marking the toe area with pins, as well as the middle of the heel. Then knit 2 cm LP, and decrease 1 loop on the sides of the pins (knit 2 LP together). While decreasing, work to a height of 5/5/6 cm, and close everything. To assemble, sew a seam on the sole, making the junction of the two halves. Make the right slipper in the same way, using scheme A 2. If you make a calculation for a small size, you get children's version sledkov.

Video tutorials: knitting slippers with braids

Gorgeous royal braid in the center of the shoe.

Easy way for beginners.

Beautiful braided braids and the absence of a seam are the main features of the model.

Making slippers on 2 knitting needles with a description

A simple method allows you to knit original slippers from colored squares.

They are made on two needles and crocheted.

For size 36-39 you will need:

  1. Yarn wool with acrylic thick (50 g / 34 m), 2 skeins of black and orange shades.
  2. Straight needles number 4.
  3. Hook number 4.

The stripes are knitted in garter stitch, changing the color of the yarn after 2 rows. For needlework, patterns such as Rice and pearl pattern are used.

The density of the fabric in a sample of 10 x 10 cm is 15 loops and 15 rows. Connect the squares in this order.

Step by step description:

  1. Work 2 squares A in Pearl Stitch with orange thread. For one, dial 15 loops and knit 10 cm. Do not close the latter, but dial them on a thread.
  2. Then knit 1 square B according to the scheme of Figure Fig, in the same color. Knit 10 cm, and thread through the loops.
  3. From 15 loops, make a figure with a picture of Rice, with black threads.
  4. Then 2 black Ds in garter stitch.
  5. Next, work 2 squares E in garter stitch using both colors.

Assemble the product, and finally sew sides C and D of the upper part. Crochet sides E using step step. The advantages of the model are that it can be both female and male, and is knitted with a simple technique. In addition, you do not need to knit such complex parts as the toe and heel.

Video: Simple quarter slippers

Slippers made of cotton on two knitting needles

To knit slippers in size 36-40, prepare:

  1. Cotton yarn.
  2. Remains of wool and beads for decoration.
  3. Needles number 4.
  4. Hook number 2.

Detailed description:

For the base, you need to dial loops in the amount of 34, and knit in the following way.

  1. 1-row: edge, 32 LP, edge.
  2. 2nd: edge, 10 LP, 1 purl loop (PI), 10 LP, 1 PI, 10 LP, hem.
  3. From 3 to 34: odd as the first, and even as the second row.
  4. 35th: after hem 11 LP, 1 add (from 1 loop 2), 8 LP, 1 add 11 LP, hem.
  5. In the 36th row: edge, 10 LP, 1 PI, 12 LP, 1 PI, 10 LP, hem.
  6. 37th: edge, 34 LP, edge.
  7. 38 to 63: even as 36 and odd as 37.
  8. From 64 to 72, a 1 x 1 elastic band is knitted.

You will receive such a blank.

Knitting for younger students

The audience: the master class is intended for classes with third-grade students.

Knitting "Slippers". Master Class

Target: knit slippers.

Tasks: inculcate aesthetic taste; develop motor skills, eye; cultivate accuracy.

Lesson progress

Mystery:

Cheerful brothers live in the hallway

Welcome guests are eagerly awaited.

Such fluffy paws -

Cozy, soft... Slippers.

Neither old nor young can do without these shoes. Comfortable, soft, warm slippers give us comfort and relaxation after a busy day. Slippers can be knitted with your own hands. They are knitted on two knitting needles in one piece and then sewn together. This work will not take long.

Step by step workflow

1. Prepare for work: yarn, knitting needles, threads, scissors, buttons.

2. Sole: Cast on 26 sts.

3. 1 row - knit all the front loops behind the back walls.

4. Row 2 and all even rows - Knit all stitches behind the front walls.

5. 3rd row - knit loops with facial loops, add one loop at the beginning and end. Figure 5a: we pick up the horizontal loop with a knitting needle, pull it out and knit it. Figure 5b: the next loop is knitted as desired: it can be behind the back walls or behind the front. There are 28 stitches on the needle.

6. 5 - 14 rows - repeat rows 3 and 2. There are 38 loops on the needle

7. 15 and 16 rows - knit facial loops.

8. 17 row - knit with facial loops, at the beginning and at the end of the row, knit 2 loops together with facial loops. There are 36 stitches on the needle.

9. 19 - 28 rows - repeat rows 17 and 18. There are 26 loops on the needle.

10. Up: continue to knit 28 row: cast on 8 loops - these are heel loops. There are 34 stitches on the needle.

11. 29 row and all odd rows - knit facial loops.

At the beginning of the row, add 1 loop. There are 35 stitches on the needle.

30 row and all even rows - knit facial loops.

12. 31 - 39 rows - repeat rows 29 and 30. There are 40 loops on the needle.

13. 40 row - close 18 loops and knit with facial loops.

14. 41 row - knit with purl loops.

42 row - knit facial loops.

15. 43 row - knit with purl loops and cast on 18 loops.

44 row - knit facial loops. There are 40 stitches on the needle.

16. 45 row - knit with facial loops, at the beginning of the row, knit 2 loops together with facial loops. There are 39 stitches on the needle.

46 row and all even rows - knit facial.

17. 47 - 55 rows - repeat rows 45 and 46. There are 34 loops on the needle.

18. 56 row - close the loops.

19. The first canvas is ready.

20. Take a button and sew.

Knitwear, plastic and comfortable, has been valued at all times, being, as they say today, in a trend. Therefore, there are so many who want to learn how to create exclusive clothes and shoes. And, if, for the implementation of cardigans, dresses and jumpers, a very high level of skill is required, then in order to knit slippers, you need only a little patience, as well as a minimum set of knowledge, tools and materials. Our publication is devoted to knitting the most simple models cozy home shoes, which an inexperienced needlewoman can master.

Models of knitted slippers with knitting needles

Start by choosing a model. Each person is different, so everyone's preferences are different. Someone loves classic cropped socks without high elastic and seams, someone has long opted for more open and economical yarn consumption, and someone likes traditional slippers with felt or silicone soles. We suggest that you get acquainted with a detailed overview of the implementation of each model and choose the one that meets the preferences of the novice craftswoman and the level of her training.

Required tools and materials

For inexperienced knitters, even the simplest knitting often becomes a serious challenge if the yarn and knitting needles are disproportionately matched. Therefore, let's start with the choice of yarn and tools.

For items such as slippers, the threads should not be thin. Optimal in this type of needlework is yarn of medium thickness with a long thread in a hundred-gram skein of 100-150 m. It is desirable that both natural and synthetic fibers be present in its composition, for example, semi-woolen yarn. Wool will warm, and acrylic fiber will make the product more durable. Today, a line of special sock threads is being produced with the addition of a polyamide component in order to make the yarn more durable. This is the ideal option.

Yarn with the above-mentioned footage corresponds to the size of the knitting needles No. 3.5-4 mm. If its thickness is slightly less (150-200 m in 100 grams), the knitting needles take No. 2.5-3. These ratios are the best. So, let's start our acquaintance with simple models of cozy home shoes.

Video how to sew slippers

Simple knitted slippers with felt soles

What will be required

    semi-woolen yarn (100 m per skein),

    corresponding knitting needles No. 3.5,

    two felt insoles size 38,

    two silicone soles

    thick knitting needle

    awl and scissors.

Progress

The work consists of two stages:

Knitting the top in the form of a ribbon 6-7 cm wide in garter stitch (all loops are facial). Its length varies depending on the size of the insole;

Sewing to the sole.

First you need to prepare the insoles. Stepping back from the edge of 0.5 cm, holes are punched with an awl in increments of 0.5 cm. They are needed to fasten the knitted top of the slippers to the sole. To complete the top of the model, 12-14 loops are typed on the knitting needles. This is the average height of the product and is selected individually (perhaps someone prefers high slippers, then they gain 15-16 loops). The tape is knitted, focusing on the number of holes in the insole - there should be 2 times more rows in knitting. For example, if there are 60 holes in the future sole, then a tape of 120 rows is made. After knitting, close the last row and cut off the thread, leaving a "tail" about a meter long. It is necessary for the subsequent stitching of the two parts.

The assembly process starts from the front of the slipper. The angle of the resulting tape must exactly match the hole at the top of the toe, therefore, inserting the thread into the needle, start sewing from outside toe that part of the tape where the last closed row is located. Having reached the top of the toe, the corner of the tape is connected to it, then assembly is continued, sewing each hem of the knitted fabric with one hole with a “needle forward” seam and, thus, passing first the inner side of the sole, and then the outer one. Having advanced to the toe, the tape is sewn over the already connected one in the same way as it was done at the beginning of the assembly. It turns out such a kind of reinforced toe from the overlap of one end of the tape to the other. In order to hide the resulting seam and prolong the life of these slippers, a light silicone sole is glued to the insole from the outside.

Slippers on two spokes

What will be required

To perform simple slippers-tracks you need:

    yarn of medium thickness (150 m),

    knitting needles number 3.5.

Progress

Gain 30 loops and knit 8 rows of garter stitch, not forgetting to perform the last loop in the purl row, and remove the first one without knitting. In our example, edge loops are included in the calculation. From the 7th row, they pass to the front surface - the front rows with front loops, the wrong side - with purl. So perform 16 rows and begin to form the heel. The number of loops is divided by 3, the central part will form it. Having knitted 19 loops with front loops, the 20th and 21st are knitted together with a front loop and the work is turned wrong side to yourself. Purl 9 loops, knit the 10th and 11th together, and turn the work again. Thus, a turn is performed, closing the heel and “picking up the side loops until they run out, and the heel is completely formed and 10 loops remain on the knitting needle.

To continue knitting, “get” 10 loops from each of the sides, introducing the knitting needle into the front half-loop of the edge. Continue knitting on 30 loops with front stitch. After completing 22-24 rows, they begin to knit the toe, reducing the loops in the front rows (there are 5 such rows in total):

    7 persons loops, the next 3 knit together with one, 10 persons., 3 together, 7 loops. Purl rows are purl without any changes;

    6 persons., 3 together, 8 persons., 3 together, 6 persons.;

    5 persons., 3 together, 6 persons., 3 together, 5 persons.;

    4 persons., 3 together, 4 persons., 3 together, 4 persons.;

    3 persons., 3 together, 2 together, 3 together, 3 persons.

The remaining 9 loops are knitted purl. The resulting product has a heel, sole and toe. It remains to knit a strip connecting the halves of the trace from above. To do this, in the last purl row, knitting 9 loops, knit the 10th from the edge of the previous row.

Knitting is turned to the front side. A toe is formed by connecting it with an already completed canvas for edge loops, knitting like this:

4 persons. loops, 3 together, 3 persons. loops + 1 loop knitted from the edge.

Performing the purl row (9 loops), one more “get” from the edge, also knitting the purl. Those. in the front rows I knit 3 central loops together, on the sides - 4 loops each. In each row (front and back), the last loop, picked up from the edge, is necessarily knitted. The work is controlled by keeping the same number of loops (9) and advancing the track, while tying it in the edge of the canvases on both sides. Thus, a decorative "herringbone" is formed, connecting the two parts of the product and being an excellent decorating element. Such a connection is made before starting work, then the loops are closed.

Slippers with knitting needles without seams

If you do not want to form seams in products such as slippers, you can use the method of doing work on five toe knitting needles, knitting the heel first, in the same way as in the previous model (on 30 loops). Then get 10 loops on the knitting needles on each side, distributing 30 loops on 3 knitting needles, 10 each, and on the 4th dial 10 more loops, looping the work, i.e. connect with the 1st knitting needle. Knitting is continued in a circle with the front stitch of 22-24 rows (if the work is done from yarn of the same thickness) until the toe is started. It is easier to navigate by trying on work.

The toe is formed in the classical way, in which socks are “closed”. Conditionally dividing the work into halves of the toe (for example, top - 1st and 2nd knitting needles, bottom - 3rd and 4th), decrease begins:

On the 1st needle - 1 person., Then 2 loops together, the remaining 7 loops are performed according to the pattern, i.e. facial;

On the 2nd needle - 7 loops, 2 together and 1 facial.

In the same way, loops are knitted on the 3rd and 4th knitting needles, that is, on each pair of knitting needles, decreases are made at the beginning and end of the row. Naturally, the number of middle loops decreases with each row. When 8 loops remain on the needles, the thread is cut off, and the loops are collected on an additional thread, tightened, tied into a ring, and the tails are hidden inside out. If desired, you can decorate the model by crocheting the beginning of knitting, since the air set of 10 loops can stretch and bend a little, but if the fabric structure is dense enough, then no additional processing is needed for the product.

So, summing up, we note that knitting slippers with knitting needles is not difficult, it is only important to want to learn how to create these cute attributes that have long become a symbol of the warmth and comfort of your beloved home.

Soft, warm, cozy do-it-yourself slippers - what could be better for home relaxation? Having chosen a nice model for yourself, having decided on the color and texture of the yarn, having spent quite a bit of time, you can please yourself with a wonderful new thing. Knitting slippers for beginner knitters is quite an affordable idea, because there are a huge number of models that are easy to perform. And for more experienced craftswomen, our selection presents more difficult options for slippers.

Knitted felt slippers

Sizes: 35-37; 38-40; 41-43.
Foot length: 22; 24; 27cm
We will need:

  • yarn, composed of 65% wool, 35% alpaca (50g per 100m) - 100g for any size;
  • straight knitting needles No4;
  • a set of stocking knitting needles No4;
  • auxiliary spoke.

Patterns :

  • shawl pattern: with forward / reverse knitting, we alternate a row of faces. n. with a number of purl; when knitting in a round - all sts in all r. - facial;
  • arana: see diagrams.

Master class (MK) for beginners in decreasing:

  • if indicated, decrease by 1p. on each side, then they must be performed strictly from the front side;
  • Decrease at the beginning of the row is performed by broach: remove 1p. front, we knit the next one with the front one and stretch it into the removed one;
  • decrease at the end of the river: we knit 2p. in 1 face.

Knitting slippers: a master class with a description for beginners

We knit in straight / reverse rows from the middle of the heel to the instep. The visor is knitted separately. Then both parts are connected and round-tied to the desired size.

Master class on knitting heels

We collect with knitting needles No4 45; 47; 49p. and make a scarf pattern. On 6; 7; 10 cm of height we decrease by 1 p. on each side (see MK above). We repeat the decrease in every 4th p. 6 times for all sizes. and then in every 2nd p. 3 more; 3; 2 times. We have a total of 27 on the needles; 29; 33p. We complete this stage of knitting by performing 1p. facial items from the wrong side. Our slippers have a height of 12; 13; 15cm. We put off knitting.

Visor - a master class for beginners

Knitting needles No4 we collect 15; fifteen; 18p. and knit two rows. Following. R. distribution scheme p. such (personal side): 3; 3; 4 persons., * from 1p. tie 2p. * between * - * repeat three times. Finish row 3; 3; 4 persons Total on the needles 21; 21; 24p. For the next, purl row, the distribution scheme of the item is as follows: 3; 3; 4 persons., 6i., 3; 3; 4 persons 6i., 3; 3; 4 persons Next, we knit slippers according to cx. A.1 Having knitted one rapport of scheme A.1, we return the previously connected elements to work and knit slippers with knitting needles in a circle.

Sock - master - class for beginners

We have on the needles No4 after the transfer of 48; fifty; 57p. We start with a visor and then - the pattern of scheme A. 1. Using MK and the instructions above, we knit the sock to the desired size. In the first r. we knit the extreme points in 2p. in 1p., i.e. in total in a row we subtract 2p. Between them is a garter stitch. Next, we will knit slippers in a circle: on the rise, we perform the pattern of scheme A.1, the rest of the stitches are a shawl pattern.

In the process of knitting, we make decreases: in every 6th p. on both sides of the figure of Scheme A.1 we decrease by 1p.

For beginner knitters, a row of aran weaves can serve as a guideline for decreases. In total, we repeat 6 decreases; 7; 8 times.

Simultaneously at 20; 22; 25 cm in height (measured from the set of the heel) we decrease by 1p. on each section of the handkerchief pattern of scheme A.1. Our master class clarifies: these will be only three decreases in a row.

We repeat the reductions for this MK after another 1 cm. As a result, we have 30 on the needles; thirty; 35p. Track. row we will knit with decreases. MK of alternation: a row of decreases / a row of purl stitches. A row of decreases: we knit all stitches in 2 stitches. in 1p. After that - 1r. purl p. In the next. R. again we make reductions: 2p. knit together in 1p. Again we do 1r. purl p. We break the thread, thread it through the remaining loops, tighten. We carry out a calcaneal seam.

We knit the second slippers with knitting needles using the same master class.

Felting - master - class

To make our knitted slippers denser and look like felt, we will perform felting. MK emphasizes: in no case do not use bleaching agents and enzymes in the process. We put the connected slippers in the washing machine and start washing at 40 degrees. Turnovers are normal prewash- need not. We put wet slippers on our feet to give shape. So we dry up. In the future, when washing, use the mode for woolen products.

Knitting slippers on two knitting needles: video master class

Jacquard slippers

Slippers "Turkish" knitted with short rows: video MK

Openwork slippers

This very cute model will be of interest especially to experienced knitters. Its main highlight is in the non-standard knitting principle: we start from the toe with a ring of threads. How to tie a ring - see the previous model. We collect the required number of stitches into it. Having knitted the open part, we move on to knitting in rows.

Outsole length: 22; 24; 27cm
We will need:

  • yarn, composed of 65% wool, 35% alpaca (50g per 75m) - 50; 100; 100g;
  • a set of stocking knitting needles No4;
  • markers (M).

Pattern :

  • performed according to the scheme.

Master class on knitting slippers

We make a ring from threads and knit according to scheme A.1. For each of the sizes, MK provides a separate scheme. After all the scheme increases, we have 36; 40; 44p. At 22; 26; 29r. closure schemes 1p. (see sch.). Then we knit to the end of the river. We have 34; 38; 42p. We continue according to the instructions of MK: we knit the initial 17; 19; 21p. in cx (indicated by an arrow), turn the work and continue in rows until cx is completed. A.1.

Let's move on to cx. A.2. For her, we collect 15; fifteen; 17p. double thread - this will be the upper part of the heel. Total 36; 40; 44p. Then we knit with a single yarn. We knit 11; 13; 14 persons., We put M. We continue according to the scheme. At the completion of the vertical rapport in work 16; twenty; 24p. Close p. We grind the heel.

Footprints - house slippers with knitting needles: video master class

Simple slippers for beginners

Slipper sizes: 35-37; 38-39; 40-42.
Foot length: 22; 24; 26cm.
We will need:

  • yarn, composed of 65% - wool, 35% - alpaca (100g per 96m) - 100g for any size;
  • set of toe knitting needles No6;
  • markers.

Patterns:

  • garter stitch: for knitting in the round, alternate 1 p. facial sts with 1r. purl; for straight / reverse knitting, all sts in all r. - facial;
  • patterns "Scythe" - see diagram A.1 and diagram A.2.

Left slipper

We collect knitting needles 36; 38; 40p. and knit in the round with garter rice 4cm. We finish with a row of purl stitches. Then we knit only the initial 11; 13; 13p., the remaining 25; 25; 27p. filming extra. knitting needle.

We continue, including in the work in this row 2p. on each side with knitting needles: 1 cr., shawl. pattern, 13; fifteen; 15p. - pattern according to cx. A.1, 1 cr., handkerchief. picture. We have 15; 17; 17p. We continue to knit the pattern along the MK, until a height of 6.5 is reached; eight; 9.5cm. We adjust so that the last row is purl. We knit with knitting needles 1p. persons. p., performing decreases 4p. at regular intervals. Remains 11; 13; 13p.

We continue with straight and reverse rows, using a master class for beginners and a pattern pattern. We work from 11;13; 13p. the central part, plus we raise the loops at the end of the river. with add. spokes. The first time we raise 12; fourteen; 16p. We expand the work, we knit a row. At the end of the river raise 12 again; fourteen; 16p. We have 60 in work; 66; 72p.

Now we will measure slippers from this place. We set one marker in the center of the top of the foot, the second - in the center of the heel loops. Knit a shawl pattern 2 cm high. Next - subtract 1p. on both sides near each marker. We make decreases by knitting with knitting needles in 2p. together facial. Thus, for one row we decrease 4p. We continue knitting with decreases to a height of 5; 5; 6 cm product height. Close P.

Right slipper

Knitting repeats the previous master class. The difference is in the direction of the “Spit” on the central part. For this slipper, scheme A.2 is used.

Assembly

We sew the seams on the sole.

Warm slippers: a detailed video master class

Hand-knitted indoor slippers will be especially warm and cozy for you and your family. Agree that a thing that is done by one's own hands is saturated with positive energy and warmth of a craftswoman. Each novice needlewoman in the field of knitting will be able to make slippers for the whole family with her own hands without any problems.

To help knitters, this article was created, in which you can find free patterns for high-quality knitting of warm and cozy slippers using knitting needles for beginners and experienced craftswomen, descriptions for them, as well as educational video tutorials. Look through all the options presented, choose the one you like, and you can start to “conjure” over the knitting needles and the ball.

A lazy version of knitting slippers with knitting needles with patterns

The photo shows a model made with two knitting needles, which can be knitted not just by beginner knitters, but even by those who just picked up knitting needles today and mastered the technology of knitting facial loops. To perform this version of home shoes, you don’t need to know anything else, which is why they are called “lazy”, since special efforts and knowledge are not required to perform them. Watch the following tutorial and see for yourself. At first glance, these house slippers do not look very attractive, but on the leg they look pretty.

Step-by-step master class with description and photo

The entire piece is garter st (all sts in all rows are knit). Cast on 14 sts and knit 14 rows. Then pick up another 14 sts on the needle (= 28 sts).

Product assembly: to assemble the lazy slippers, see the following step by step photos.

You can change the size of the product in the way of a larger or smaller set of loops.

Model created quickly and easily on two needles

Knitting slippers on 2 knitting needles is a fast and interesting process. Especially if the model of indoor shoes is original and unusual. Look at the next photo.

How do you like these "dwarf slippers"? They can't help but like it. And working on their creation is a real pleasure. They knit in the same breath. In the evening, you can definitely complete a couple of such slippers, or maybe two. This model will look very bright and fun if you knit it from multi-colored threads, at the same time there will be a use for the remnants of yarn. You can decorate slippers with pompoms, tassels or knitted appliqués.

In a similar way, and are created, try to knit them with your own hands!

Introductory information for everyone

Product size: 35-37. Foot length: 22 cm. For knitting, you will need 100% wool yarn (36 m / 100 g) - 100 g, knitting needles No. 10.

Gauge: 8 sts of pearl pattern = 10 cm wide.

Pearl pattern:

1 row: * 1 person., 1 out. *, repeat from * - *.

Row 2: Knit on purl stitches and purl on knit stitches.

3rd and all subsequent rows knit as the 2nd row.

Additions: perform additions on faces. side of the work, making 1 yarn over. In the next row, knit a crochet behind the back wall.

Step-by-step instructions with a description of the work

Knit in straight and reverse rows, starting from the toe. While casting on, leave the end of the thread for sewing slippers about 30 cm long.

On the knitting needles, dial 8 p. 4 persons., 1 yarn. 2 persons. (= 10 p.). Knit 1 row in purl. side of the front p. Next, perform additions in the next row in this way: 4 persons., 1 yarn over. 2 persons., 1 yarn, 4 persons. (= 12 p.). Link 1 out. a row of facial sts. Continue working on all loops with a pearl pattern.

Knit the product to a height of 9 cm. Then dial 9 new sts at the end of the next 2 p. (= 30 p.). Continue knitting on all loops with a pearl pattern. At a height of 21 cm, knit the next person. a row in this way: 9 persons., turn the work, knit a reverse row. Next, cast off the 1st 21 sts (= 9 sts on needle). Knit 2 rows on these loops and finish knitting.

Having mastered this simple knitting technique, you can move on to something more complex. For example, try linking .

How can you assemble the finished product yourself

Assembling the product: stretch the thread through 8 p. of the typesetting row, pull off the sock and sew the product edge to edge along the central upper part of the leg, leaving an open section 6 cm long from the top. Next, sew together the edges of the slippers in the center of the back edge to edge.

A wonderful product according to the Japanese method with a photo

Looking at the next photo, it is unlikely that any of you will remain indifferent to these wonderful slippers.

This model is connected by Japanese technology. Read the description and look at the step by step photos. Everything is quite simple and clear. Knitting such a model of indoor shoes is a fascinating process, and the result is obvious.

Description of knitting for needlework beginners

Dial 40 sts on the needles with a thread in 2 additions and knit with an elastic band 2x2 18 cm.

Then knit straight for 20 rows. Close loops.

From the other edge of the gum, pick up 40 sts on the knitting needles and knit a garter stitch with decreases in the same way as on the opposite side. Get this detail.

Ready knitted item fold in half and sew on the sides (where the elastic is 2x2).

Final result:

If you do not know what gift to give to children, read - you will definitely like it!

We create children's slippers according to an interesting lesson for everyone

Knitting baby slippers can be turned into real magic that will take place in front of your beloved child. Not just a knitted fabric will come out from under the knitting needles, but a cute and beautiful mouse or hare, or maybe even a pig. "How?" - you ask. And it's very simple. The next master class will tell you how to knit such shoes in the form of animals.

The description is given for such “mouse slippers”, but you can decorate them as you wish under any other animal. Believe me, your child will wear such house shoes with great desire and pleasure.

Product size: 25-26. For work, you will need wool / acrylic yarn - 100 g, leftover yarn for decoration, knitting needles No. 3, hook No. 3.

Detailed MK for beginners in knitting

  1. Cast on 28 sts on needles and work rib 1x1 (*knit 1, purl 1 *) 4 cm (= 12 rows).
  2. Next, knit the product. satin stitch.
  3. To form the heel, divide the work into 3 knitting needles (on the extreme knitting needles, 10 sts each, on the central knitting needle, 8 sts).
  4. Next, just do middle part, knitting at the end of each row on each side the last loop together with the 1st p. of the extreme knitting needle, thereby gradually reducing the number of loops from the extreme knitting needles.
  5. When turning the work, the 1st p. of the middle part does not need to be knitted, remove it like an edge. Thus, knit until there are no loops left on the extreme knitting needles.
  6. Next, knit in a circle: there are 8 sts on one knitting needle, on the 2nd knitting needle from the side of the gum, lift 10 sts, on the 3rd knitting needle, type 10 additional sts, on the 4th - 8 sts on the side rubber bands.
  7. Knit the product further in circular rows of faces. loops 6 cm. After 6-7 cm, perform 2 sts together at the beginning of each knitting needle.
  8. When 1 stitch remains on the needles, knit them together. Cut the thread and fasten to the inside. side of work.
  9. Crochet the eyes and nose with matching threads.
  10. For knitting ears, dial 3 air. n. and knit as follows:
  11. 1 row: 2 tbsp. b / n.,
  12. 2nd row: 3 tbsp. b / n.,
  13. 3rd row: 4 tbsp. b/n.
  14. Sew the ears to the slippers.

Small "mouse slippers" are ready not only to warm the baby's leg, but also to play with him.

Video lesson with diagrams

Here are such simple and affordable models of home slippers that can appear on your shoe shelf. And if your household will have a choice about which slippers to give preference to - factory-made or knitted by your hands, then the answer to this question is obvious. So hurry up to please your most dear and beloved people with a beautiful, comfortable and warm gift - watch our video tutorial and start working miracles!

Easy implementation of "knitted" ideas for you!