Knitted sandals for children. Crochet children's sandals. Knitting pattern for a strap and harness for sandals

First, we knit a chain of air loops.

Next, we knit sandals, respectively, below the proposed scheme:

We need to tie two orange soles.

And two of the same yellow soles. As a result, for one pair of sandals, we need four soles.

We put the yellow sole on top of the orange one and tie it in a circle with a chain, threading the hook through both soles, grab the thread, pull it out and thread it through the loop. Next, knit in a circle and stop at the first loop.

We begin to tie both soles starting from the side with orange yarn so that we get 11 loops in the center.

It should turn out such a beautiful sole, with an upper contrast line.

We unfold the knitting and continue to knit with single crochets in the opposite direction for 31 loops.

We turn the knitting again and knit 31 single crochet. In total, we knit 6 rows in this way.

Change the color of the yarn to yellow, make a loop. We pass the hook at the base of the sole and grab the loop. We knit a chain along the side wall of the sandal and from ten air loops we knit a chain for the future loop.

We fix the loop with a connecting loop and continue to tie the upper part of the sandal to the very base of the sole.

We do the same action with the second sandal, the only thing worth noting is that we make the loop from the opposite side. We get two of these sandals.

Sew on chamomile buttons using a tapestry needle.

Booties-sandals are ready.

Any mother-needlewoman is happy to knit for her kids. After all, what is made with your own hands is filled with love and warmth.

To create true DIY magnificence, you just need a little patience and follow my instructions. And then you will succeed! To complete this master class, it is necessary to choose only high-quality yarn in order to avoid an allergic reaction on the delicate skin of the child.

You will need:

Yarn 100% acrylic;
Hook #3;
Brooches or other decorations, ribbons;
Scissors, thread and needle.

List of abbreviations:

V.p. - air loop
S.n. - a column with 1 crochet
S.b.n. - single crochet

How to crochet sandals - a master class for beginners:

The sole and upper part of sandals.

1. We collect 10 vp with a light green thread. Then you need to insert the hook into the 8th loop and continue knitting s.n. In the next four rows, add 1 loop at the same time on both sides of the knitting. After 4 rows are knitted, the number of columns will be 16. When 24 rows are knitted from the beginning of work, it is necessary to start decreasing. To do this, you must simultaneously knit 2 loops together along the edges of the product. So you need to knit only 4 rows, in the end there should be 8 columns. At the end, it is necessary to tie the entire part of the s.b.n. in a circle.

We start knitting the heel in height.

1. To do this, you need to count 7 rows from the beginning of knitting the sole and start to perform one row of s.n., while capturing only the back of the loop of the lower columns. Having knitted a row to the opposite side, you need to dial 30 ch. and attach to the beginning of the heel. This will be the first strap of a knitted sandal.

2. We knit it with s.n. in a full circle, while not forgetting to perform three reductions of the columns: the 1st must be knitted exactly in the middle. It consists of 5 columns in one. The 2nd is performed at the place where the strap is attached to the heel. To do this, knit 3 columns in one loop. And the 3rd is performed similarly to the second, only on the opposite side.

3. Next, we continue knitting the heels evenly on both sides, subtracting 2 columns each. So we knit two rows. Again we perform a set of 30 ch, for the next strap, but unlike others, it should not have decreases. It is this strap that we will fasten, for better fixation of the sandal booties on the leg, therefore, it must have a free end.

4. At the end, we perform lace. To do this, we knit 1 s.n., 1 ch. and s.n. We perform sandal on the entire upper part of the booties, including on the strap. Next, we knit arches: 1 s.b.n., 3 s.n. and so on to the end of the row.

5. We knit the remaining straps. We introduce a hook under the first strap and knit a row of s.n., while not forgetting to grab only the back thread of the loop of the bottom row. We attach the thread to the sixth column from the previous strap and dial 12 ch, 6 next sc. we knit from 6 columns of the previous strap (exactly in the middle of the booties), then we knit 12 ch. We knit the next row with s.n.

We also knit the last strap from the 6th column from the previous strap. We collect 10 ch, 6 s.b.n., 10 ch. Then we perform a series of s.n. In the middle we knit 6 columns into one.

6. On the edge of the sole we perform openwork: 1 s.n., 1 ch, 1 s.n., and so on throughout the circle. Then 3 s, 1 s.b.n. around the entire circumference of the sandal. On the bends of the sole we knit 3 columns from each loop. We knit the second sandal in the same way.

We decorate our knitted sandals.

1. We stretch the ribbon along the edge of the lace and tie a bow out of it on the back surface of the booties-sandal.

2. Next, we do the same with the upper part of the booties-sandal and the strap-lock. We tie a bow on the side of the sandal, it will be a full-fledged clasp.

3. Then we proceed to decorate the central part of the sandal. For this fit any jewelry. It is she who will determine the true beauty of the entire product. For my booties, I picked up Barbie doll jewelry. It is perfect for girls of all ages. We fasten the jewelry with a thread as tightly as possible. After all, the baby is very curious and can, if desired, taste it, so do not spare the thread.

4. Well, now you know how to knit sandal booties for a princess! These sandals will decorate any outfit of a little fashionista!

Knitwear is becoming more and more popular every day. Mothers and grandmothers especially knit for their babies. Knitted clothes look unusual, the light plays on it very beautifully, and the very texture of such a thing is very pleasant to the touch.

Crochet baby booties-sandals

The product can be light and airy, or dense and warm - it all depends on what function the connected item will perform.

Such cute little things as booties and sandals are gaining special love and popularity today. crocheted. Associated with love and girls, with various decorations, cars, flowers, in various shapes and colors - all this can be embodied by any needlewoman for her beloved child!

Necessary preparatory actions

So, a little later we will consider crocheting sandals according to the pattern with a description. In the meantime, you need to make measurements and small calculations. Measure the length of your foot from heel to toe. It is most convenient to do this by placing the baby's foot on a piece of paper and circling the foot. For newborn babies and toddlers up to 3 months, the standard bootie length is about 10 cm. You don’t need to take less, because booties are rarely worn on a bare leg, and the baby will be uncomfortable in a tight product.

The next step is to decide on the height of the product. Crocheted sandals and booties look a little different. Sandals usually cover the heel and reach the protruding bone, and booties also capture part of the lower leg. Booties are more like low ankle boots.

Crochet sandals: a diagram with a description. Knitting foot

The standard start is a set of air loops (circles in the center).

The columns in the diagram are double crochets. Not all columns are drawn, but this does not interfere with perception. For a bootie with a foot length of 10 cm, you need to dial 10 air loops. Three more loops are cast on instead of the first column, and the first row is knitted with a double crochet. In the first loop you need to knit 2 columns. Next, we knit one column into each loop, 5 columns into the last loop of the row, then again one column into each loop, and two more columns into the same loop where the first two columns were tied. Thus, we knitted one row, which resembles an oval in shape. The second row is knitted similarly, increases are added according to the scheme.

In order for crocheting sandals according to the pattern with the description to be successful, and the product not to puff, it is better to look not only at the pattern, but also at the product during the knitting process. With a sandal foot length of 10 centimeters, it is enough to knit three rows of double crochets. Depending on the thickness of the yarn, the product may turn out a little less or a little more. In the sample - standard children's yarn for hand knitting brand Baby. For larger booties, you need to decide on the length by looking at the outlined foot of the baby. The booties should protrude from all sides beyond the borders of the circled foot by no more than 0.5 cm. An unlimited number of rows can be knitted, however, for large sizes it is better to combine double crochets, simple columns and semi-columns to create an ergonomic sole.

Side part knitting

Crocheting the side of a bootie or sandal is a continuation of knitting the foot, and the number of stitches is the same as in the last row of the foot, but when grabbing the thread, the hook should be inserted not for the upper loops of the stitches, but for their "body". Thus, perpendicular rows are obtained and the sandal "rises up".

Starting from the second row, we make 2 decreases in each row on the heel. For open sandals, it is better to do 1 decrease in each row.

The product turns out to be open, and you can leave it in this form, but add a jumper so that the sandal does not fly off the leg.

You can crochet a jumper to decorate such a bootie-sandal, or make a slightly more closed nose and decorate it with flowers, cars, volumetric patterns. The jumper can be connected with simple columns, or you can choose openwork pattern, then no more decorations are needed.

Another option is flowers, as in the example. They can be knitted according to the following description: we collect 50 air loops, of which we knit three columns with a crochet into each loop of the entire first row. The second row is a column with two or three crochets, which can be alternated for more volume.

You can also add green petals or a few roses, and the booty will take on a finished look.

The remaining threads can be cut or with their help to fix the leaves.

With more voluminous roses, the use of booties can be inconvenient, and smaller ones look ugly.

An interesting option is crocheting closed sandals according to the pattern with a description that is attached to the photographs.

As you can see, everything is quite simple, and the scope for imagination is not limited!

Knitting crochet booties-sandals It will take you little time, and everyone will enjoy the result. The length of the sole is 12 cm. Our sandals are knitted for a child of 6-12 months.

For work you will need:

Yarn Pekhorka Successful blue (100% cotton; 50g - 220m);
YarnArt Summer yarn (70% cotton - 30% viscose; 100g - 400m);
Hook number 2.

Legend:

VP - air loop;
CCH - double crochets;
RLS - single crochet;
SS - connecting column;
CC2H - a column with 2 crochets;
CC3H - a column with 3 crochets.

The first part of the video tutorial on crocheting the soles of booties-sandals:

Description of the process of knitting soles for crochet booties-sandals:

Below is a diagram by which you can tie yourself.

Crochet soles for booties-sandals:

1 row: 1 VP and in the 2nd loop from the hook we begin to knit - 7 sc, 7 dc and in the last loop we knit 8 dc (rounding the toe) and now we knit the opposite side - 7 dc, 8 sc and knit 3 sc in the same loop ( heel rounding), SS;
2 row: 3 VP, 15 dc, 5 turning loops, we knit in one loop 2 dc each (5 times), go to the opposite side and knit 16 dc, 3dc in one loop, 4 dc in one loop, 3 dc in one loop, sl-st ;
3 row: 3 VP, 15 CCH, turning loops - in one loop - 2 CCH, 1 CCH, in one loop -2 CCH, 1 CCH, in one loop -3 CCH, in one loop - 3 CCH, 1 CCH, in one loop - 2 CCH, 1 CCH, in one loop -2 CCH. We pass to the opposite side 16 CCH, in one loop - 2 CCH, 1 CCH, in the bottom of the loop - 2 CCH, 1 CCH, in one loop -3 CCH, in one loop - 3 CCH, 1 CCH, in one loop -2 CCH , 1 CCH, in one loop -2 CCH, SS.
4th row: RLS.

For each of the soles you need to tie 2 insoles. Only 4 pieces.

2 insoles are applied wrong side to each other and with white yarn we knit RLS in a circle.

The second part of the video tutorial on crocheting the top of booties-sandals:

We knit a heel with a strap

We mark the middle of the heel, count 7 loops in different directions and also mark with pins.

We report 7 loops from the pin and start knitting the right sandal:

1 row: (blue yarn) 3 ch, 6 dc, 15 ch, 7 dc, 21 ch (strap);
2 row: turn knitting, 1 VP and knit the entire row of RLS;
3 row: 3 VP, we knit the entire row of CCH, at the end of the strap we do not knit 9 loops. These will be the holes for the buttons. We knit like this: * 1 VP, skip one loop and knit 2 CCH * - 3 times.
4 row: (white yarn) we tie the entire heel and RLS strap.

The left sandal is knitted in the same way. Only the strap should be in the other direction, so we will have 1 row like this - 21 VP, 7 CCH, 15 VP, 7 VP. Further rows will be like the right sandal.

We knit a toe and straps of sandals

You can print the diagram below.

Knitting pattern for a strap and harness for sandals:

We collect 16 VP with blue yarn.

We knit a side harness (white yarn in 2 threads). We mark on both sides with pins the place where we will start knitting the harness. We attach the thread and knit 1 VP, 5 RLS. Next, we continue to knit RLS to the length of the harness we need, it all depends on the fullness of the foot, I have 7 cm. We leave the end of the thread long, in order to then sew the harness on the opposite side.

We begin to knit the central harness (blue yarn in 3 threads). We mark with two pins where the beginning and end of the harness will be. We attach the thread and knit:

From 1 to 4 row: 1 VP, 7 RLS;
5 row: 6 VP, 2 VP, skip 2 loops and knit 2 СС3Н, 2 VP, skip 2 loops and knit 1 СС3Н in the last loop. It turned out a hole for the side harness.
From 6 to 10 row: we knit 7 sc;
11 row: 6 VP, skip 2 loops - 1 СС2Н, 2 VP, in the last loop 1 СС2Н. There is a hole for a strap.
12th row: RLS.

We pass the side harness through the hole and sew it on the opposite side. We pass the strap through the second hole. We sew on a button. Sandals are ready.

Finally, the long-awaited summer has come, the days are so happy! The sun warms with its bright rays, the wind blows with pleasant warmth, which means that it's time to take off all winter clothes and put on the beauty that everyone will see.

I propose to crochet booties sandals, which will certainly attract the attention of everyone, because they are very unusual and stylish! Adults wear sandals and slates in the summer, so why is it worse for kids and babies who sit in their own and enjoy the world around them?

So, we knit for children, so you should choose cotton yarn, then the legs of the kids will breathe even in the most. You need to work with crochet No. 2.5.
Leg size 10.5 cm.

Crochet booties sandals for a girl - a step-by-step lesson with a diagram and a photo:

1. The foot can be knitted according to any pattern, but this one is optimal for this model of sandals, it is most convenient to fasten it at the end and looks neater.

2. We collect 20 VP, 3 of them are lifting for the next row.

3. In the 4th loop we knit 3 CCH at once.

5. In the last VP, we knit 7 dc for a turn and again we knit dc, one in each loop of the row, except for the last one.

6. In the last loop following the scheme - 3 more CCH and SP complete the row.

7. Then, according to the scheme, we knit the 2nd row and the third, carefully considering all the additions, after which we get the foot.

8. Such details need to be connected 4 pieces, for brightness and creativity, you can take 2 colors. By changing the color, you can make an addition to the outfit of absolutely any color.

10. It is important to consider that before ironing, you must definitely experiment on a sample, otherwise it may turn out that the part does not iron out, which is what we need, but rather deforms or changes color.

11. We take one of the details of the foot and thread the hook under the CCH, which is located in the last row through one CCH from the last increase on the heel.

12. We knit 4 lifting VPs, which replace 1 SS2H.

13. then we knit 6 more CC2H - the first wall is ready.

14. Then 12 VPs, they should just be enough until the fifth of the seven reversal CCHs of the first row and we knit CC2H there.

16. Next, you need to knit a chain of 21 VPs (the number of loops is equal to the distance that is needed for the strap (I have 16 loops), plus 5 loops per buttonhole). I knit a loop in the 5th VP and continue the row of CCH.

17. The 11th loop from the VP, the loop where the jumper is for the finger and 1 loop from the next 12 VP, we knit with one CCH.

18. One bootie of a sandal for a girl is almost ready!

19. For the second sandal, we do the same, but in a mirror way, that is, we start not from the wall, but from the strap. We knit 21 VP, then clinging under the SSN, we knit the wall, then 12 VP, a jumper for the finger, 11 VP, the second wall, then the second row, according to the first sandal.

20. Here are both upper parts of crocheted sandal booties ready.

21. All protruding threads must be pulled out to the wrong side so that they do not spoil appearance our beauty.

22. Align the second part of the foot with the first.

23. Connect chain stitch two feet between each other, crocheting both, hook the thread and pull it out, and so on from loop to loop.

24. So, our wonderful booties sandals for girls are ready, all that remains is to decorate them and sew buttons on the strap and you can safely go outside with your baby! The only drawback of these most beautiful sandals is that they are not comfortable to wear for children who already walk on their own, but they look incomparable on the legs of those who still cannot stand!