12/17/2012 10 736 0 Elenka

For children

If you have friends who have small children, and you don’t know what to present to them, you should definitely come to us. We offer knit such cute bunnie booties on one's own.

To make booties we need yarn, preferably half-wool, a set of needles No. 2.5 and hook.

First we do the sole. All rows are LP. We put 7 loops on the knitting needles and knit one row. In the 2nd, 4th and 6th rows, we make yarn overs near the edge loops; in odd rows we knit them with a knitted loop, so that there are no holes. There are 13 loops on the knitting needles. Further. we knit 13 purl stripes without additions (26 rows). Next, we make one yarn over on each side and knit 15 loops without adding, so you get 23 stripes or 46 rows. After this, we gradually decrease the loops: on each side, at the beginning and at the end of the odd rows, we knit two loops together, and perform such decreases until there are 7 loops left on the knitting needles. Then close the loops.

Next, using a white thread, we cast on four knitting needles in a circle around the sole of the loop so that there are 12 loops for the toe, and an even number of loops on the remaining knitting needles.


Making the cloves

We knit in circular rows with facial loops. In the 2nd row we count as follows: knit 2 together, yarn over. Repeat this way until the end of the row. The 3rd and 4th rows are performed with facial loops. Tie a white thread and cut it. Further. we knit in circular rows with red thread, forming “teeth”. To do this, we connect the loops of the next row with the red loops of the last row, which is in front of the white one, as in the photo.
We knit nine rows in a circle.


We perform the toe

We perform the toe on the front 12 loops as the heel of a sock. We transfer the 123rd loop to the second knitting needle and knit two loops together with a knit stitch. Let's turn the work around. Next, the thread before work, remove the first loop, and purl the remaining loops, but don’t knit the last one, but transfer it to another knitting needle and purl the two together. Let's turn the work around. Slip off the first stitch and knit the rest. We repeat in this way until there are 30 loops + 12 toe loops left on three knitting needles. We stop on the wrong side.


Next we knit the bootie in a circle from the inside.

Two rows - purl stitches.
Seven rows of elastic (1x1).

One row - purl stitches.
Seven rows - facial loops.


Then we tie a white thread.
We knit one row with knit stitches, 1 row with purl stitches, 1 row with knit stitches, 1 row with purl stitches. Next, use red thread for two rows of knit stitches. Then with a white thread: 1 row - LP, 1 row - IP, 1 row - LP, 1 row - IP. We close the loops.



We make the ears. For them, we cast on 22 loops with a white thread, and purl the first row. Next, use a red thread for 6 rows, alternating the front and back rows. We cut the red thread, leaving a long tip. We then sew the ears to the booties with this tip. White thread 2 rows. We close the loops. We connect both edges with a hook. The final touch is to embroider the nose.



Booties ready for the baby.

Dear aspens, I am very pleased that you liked my booties. I receive emails asking for a description, I have never done MK. This is my first.
I knit on 4 needles, the seam follows only the mark. Cast on 46 stitches on the needles.
to photo hosting →
I have one needle that is thinner, but then the edge doesn’t stretch as much. Next, I distribute the stitches onto 3 knitting needles and knit in the round. 1p - front, 2p - and all even rows - purl. From the 3rd row I make an increase: 1 knit, 1 loop (from the broach of the previous row, then I will mark it as ") 21 knit," ", 2 knit," ", 21 knit," ", 1 knit. Row 5: k2, ", k21,", k4, ", k21,", k2. Row 7: k3, ", k21,", k6, ", k21,", k3. . Row 9: k4, ", k21, ", k8, ", k21, ", k4. (62 loops) it turned out like this:
to photo hosting →
Now we take another thread and knit “teeth” 3 rows - knit, 1 row - yarn over, 2 loops together. And again knit 3 rows. The “white path” is very clearly visible on the reverse side
to photo hosting →
we are recruiting it for an additional knitting needle to photo hosting → and knit the green loop and the loop from the additional needle together. to photo hosting → The “teeth” are ready. Now we knit in a circle, (We have already knitted one row) We knit the next row with purls, then again 1 row with knits, and 1 row with purls. Take another thread and knit 1 row of knits and 1 row of purls.
to photo hosting →
There are 14 rows in total, or 3 tracks of a different color. We knit a “toe” for this on the first knitting needle we have 16 loops, for 2-10, take the main thread, knit 9 knit stitches, 2 together, turn over - 9 knits, 2 together. We change the color after two rows. We have 16, 10, 16 left (42 loops) we knit with white thread - 1 row of knits, 1 row of purls. Using green thread we knit holes for the lace: 1 row of knits, 1 row: yarn over, 2 loops together, 1 row of purl. Next we knit with an elastic band 1*1, 17 rows
to photo hosting →
Now we will turn the bootie inside out and continue knitting. We knit 1 row of knits, 1 row of purls with green thread. (Pattern - the number of loops is divided by 4, we have 42, in the first row with green thread, I decrease 2 loops, and on 40 loops I knit the pattern) With white thread, 1st row: k1, * remove 1 loop while working, 3 persons*. Row 2: P1, *Slip 1 stitch, thread at work, P3*. Repeat rows 1 and 2 again. Knit 1 row of knits, 1 row of purls with green thread.
to photo hosting →
Then with white thread: knit 3, remove 1 loop, thread at work.
Next row: purl 3, slip 1 stitch, thread at work.
Repeat these two rows again. We knit with green thread: 1 row of knits, 1 row of purls. White thread: k1, slip 1 loop, thread at work. In the next row we knit: purl 1, slip 1 loop, thread at work, purl 3. We repeat these two rows again. And we knit 1 row of knits, 1 row of purls with green thread. Here's what happened:
to photo hosting →
The pattern fits well. The threads are changed on the wrong side, but on the front side it is not visible. We knit 1 row of knits, 1 row of purls with white thread, and close the loops. We sew up the trace. The bootie is ready.

Every mother tries to dress her child in an original way. To create a bright image for your baby, you don’t need to buy expensive clothes. Unusual bunnies will help with this. These baby's first shoes can be not only comfortable, but also beautiful. To do this, you don’t have to know how to knit professionally or look for a specialist in this type of needlework. Just read how to knit bunny booties. The description diagrams shown in this article will help anyone cope with this task.

These bunny booties will look great on little feet. If you choose the right yarn color, both boys and girls can wear them. For a charming baby, you can knit bunny booties with knitting needles from pink or white yarn, and for your son, darker colors are suitable - blue, blue.


All that remains is to consider how to knit bunny booties with knitting needles.
The bunny booties discussed in this description are knitted from “Semyonovskaya yarn”, you can also take “Pekhorka”, in which wool and acrylic are 50/50. You will need 5 knitting needles 2.5 mm.
The sole is knitted with knit stitches.
Cast on 7 loops (the first and last are edge loops). Let's knit one row.
2nd, 4th, 6th rows - make yarn overs near the edge loops, in odd rows knit yarn overs as knit crossed loops.
You will get 13 loops.
We knit 26 rows without increases.
Yarn over on each side and knit 15 stitches without increasing. You should get 23 stripes out of 46 rows.
At the beginning and end of odd rows, knit 2 stitches together until 7 stitches remain. Cast them off.
We cast on loops on 4 knitting needles with white thread. There should be 12 loops on the toe, and an even number on the rest.


We form teeth.
We knit a row of knit stitches in the round
2p.: 2 knit stitches together, yo. Repeat until the end.
3-4 rows: fasten the knit loops and cut the white thread.
To form the cloves, we knit with red thread, connecting the loops of the next row with the red loops of the row that was before the white one.


Or knit in a circle with red thread and sew up the loops


9 rows are knitted with knit stitches.


We knit a toe on 12 loops located in the front.
Transfer the 12th loop to another knitting needle and knit 2 loops together.
Rotate the product. Remove the first loop, with the thread in front.
The remaining loops are purl, except for the last one, which is not knitted. The last loop is transferred to another knitting needle and knitted together with the next purl.
Rotate the product.
The first loop is removed, the remaining ones are knitted.
Continue knitting in this way until you have 30 loops and 12 toe loops on the knitting needles.
We finish knitting on the purl row.


We continue to knit from the inside in circular knitting.
2 rows purl, 7 rows – rib 1*1, 7 rows – knit, 1 row – purl, 7 rows – knit. We tie a white thread.
1r. – persons, 1 rub. - purl, 1p. persons., 1 rub. - purl
We take the red thread and continue two rows of knit loops.
We close all the loops.


All that's left is to tie our bunnies' ears.
We cast on the knitting needles 22 loops.
1r. - purl
We knit 6 rows with red thread - 1 row - purl, 1 row - knit, 1 row - purl. etc.
Leave a little red thread to sew on the eyelet.
Knit two rows with white thread and bind off the loops. Use a hook to connect the two edges.




You can also check out another model

For booties you will need:

• Yarn “Semenovskaya” or “Pekhorka” (50% wool, 50% acrylic, 5 knitting needles 2.5 mm.)


• Spokes

Description of knitting booties

Sole. All rows are knit stitches.

Cast on 7 loops on the knitting needles (of which 1 and 7 are edge loops). Knit 1 row.

2, 4, 6 rows - make yarn overs near the edges, knit them in the odd rows. crossed.

There will be 13 stitches on the needles. Knit 13 purl stripes (26 rows) without increases. Then make 1 yarn over on each side and knit 15 loops without increasing to make 23 stripes (46 rows).

On each side, at the beginning and end of odd rows, knit 2 loops together until 7 loops remain on the knitting needles. Close the loops.

Using white thread, cast on stitches on 4 knitting needles in a circle so that there are 12 loops on the toe, and an even number of loops on the remaining knitting needles.

Knitting “teeth”

Knit 1 row in the round with knit stitches.

Row 2 – knit 2 together, yo – repeat until the end of the row.

Rows 3 and 4 – front rows. Tie and cut the white thread.

We knit in a circle with red thread and form “teeth”. To do this, we connect the loops of the next row with the red loops of the last row, which are in front of the white one.

You can simply knit in the round with red threads and then sew up the loops.

Knit 9 rows in the round.

Knitting a toe on the front 12 loops like the heel of a sock.

Place the 12th stitch on the second needle and knit 2 stitches together.

Turn the work around. Before work, remove the first stitch and purl the rest without knitting the last one. Transfer it to another needle and knit 2 stitches together purlwise. Turn the work around. Slip off the first stitch and knit the rest. Repeat this way until there are 30 stitches + 12 toe stitches left on 3 needles. Stop on the purl row.

Now knit booties from inside round.

Purl 2 rows.

7 rows with 1x1 rib.

Knit 7 rows.

Purl row 1.

Knit 7 rows.

Tie a white thread.

Knit 1 row, purl 1 row. K1 row, P1 row.

Red thread 2 rows knit

With white thread, knit 1 row, purl 1 row. K1 row, P1 row. Close the loops.

Ears.

Cast on 22 stitches on the knitting needles with white thread and knit 1 purl row.

Red thread 6 rows, alternating front and back rows. Cut the red thread, leaving a long end. Then sew the ears to the base.

White thread 2 rows. Close the loops. Crochet the 2 edges together.

And here’s what the finished bunny booties look like.

A real mother always cares about the comfort and health of her baby. The child will definitely be interested in bright shoes, but at the same time they should still be soft and warm. We advise you to read our master class on knitting booties in the shape of fluffy bunnies. We warn you that the shoes are designed for a child aged 3-4 years.

To work you will need to prepare:

• hook;
• cardboard;
• a needle;
• scissors;
• suitable yarn.

Obviously, the choice between brown and pink shades should be made depending on whether you are crocheting “Bunny” booties for your daughter or son. White color will be universal for any gender.

Detailed job description

First of all, you need to tie the sole. This can be done using a very clear diagram:

Using a pink or brown thread, cast on a chain of 25 loops (chain). Knit as shown in the picture above.

Let's start with the instep and toe. To do this, take a white thread (universal for boy’s and girl’s booties) and knit five rows with single crochets in a circular pattern. Let's start creating the toe according to the following scheme:

To do this, we continue to knit, gradually removing the stitches from the toe side. That's it, we managed to knit the booties themselves. Cut the thread with scissors.

Since our booties will be shaped like bunnies, we need to add a tail and ears.

Take a brown or red thread and cast on a chain of 11 loops (again air stitches). You need to knit them according to this simple pattern:

• Air loop (lift).
• Single crochet (dc) - nine pieces in each loop.
• The tenth loop is 5 double crochets.

On the second side you also need to knit 9 tbsp. Take a white thread. Next, you need to tie the resulting product with double crochets: 9 in each loop, 2 in the top 5 loops and again 9 in each.

We repeat all operations 3 more times to knit all the ears that will need to be sewn to the toe.