Knitting sweater for a boy pattern fig. Jumper for a boy with knitting needles: model, patterns, description and diagram. A simple model for beginners

Dimensions: 98/104 (110/116) 122/128. If there is only one number, it applies to all sizes.

You will need: yarn (98% wool, 2% polyester; 90 m / 100 g) - 400 (400) 500 g pistachio and 100 g neon yellow; knitting needles and short circular knitting needles No. 9.

Garter stitch: front and back rows - front loops. In circular rows, knit alternately 1 circular row - purl loops, 1 circular row - facial loops.

Facial surface: front rows - front loops, purl rows - purl loops.

Wrong surface: front rows - purl loops, purl rows - front loops.

Stripe pattern:* 5 rows in stockinette stitch, 1 purl row - front loops, from * constantly repeat.

Knitting density: 11.5 p. x 19 p. = 10 x 10 cm, knitted with a striped pattern; 11.5 p. x 22 p. = 10 x 10 cm, knitted in garter stitch; 11.5 p. x 20 p. = 10 x 10 cm, connected by a combination of patterns.

Back: dial 38 (42) 47 loops on the needles with a pistachio thread and knit with a garter stitch for the strap, starting from 1 purl row, 7 p. pistachio thread and 4 p. neon yellow thread. Then continue to knit with pistachio thread 24 (24) 30 p., observing the following sequence of patterns: chrome, 9 (11) 13 p. with a striped pattern, 1 p. 17 (19) 22 p. Striped pattern, chrome. Then knit 12 p., Observing the following sequence of patterns: chrome, 9 (11) 13 p. Striped pattern, 1 p. Purl stitch, 16 p. Garter stitch, 1 p. striped pattern, chrome Next, observe the following sequence: chrome., 17 (19) 21 p. Striped pattern, 1 p. stitch, 8 p. garter stitch, 1 p. out. stitch, 9 (11) 14 p. striped pattern, hem. At the same time, after 18 cm = 36 p. (20 cm = 40 p.) 22 cm = 44 p. from the bar close for armholes on both sides 4 p. = 30 (34) 39 p. Continue knitting straight and after 31 cm = 62 p. (34 cm = 68 p.) 37 cm = 74 p. from the strap close for the neck medium 12 (14) 17 p. and finish both sides separately. To round the cutout along the inner edge, close in the 2nd p. 1 x 1 p. After 33 cm = in the 66th p. (36 cm = in the 72nd p.) 39 cm = in the 78th p. purl the remaining, respectively, 8 (9) 10 sts of the shoulder and close at the same time.

Before: knit symmetrically to the back, but with a deeper neck. To do this, after 28 cm = 56 p. (31 cm = 62 p.) 34 cm = 68 p. from the strap close the middle 6 (8) 11 p. and finish both sides separately. To round the cutout along the inner edge, close in every 2nd p. 1 x 2 and 2 x 1 p.

Sleeves: cast on the needles with a pistachio thread for each sleeve, 26 (28) 29 loops and for the bar, starting from 1 purl row, knit with a garter stitch 7 p. pistachio thread and 4 p. neon yellow thread. Then continue to knit with a pistachio thread with a striped pattern, while for the bevels of the sleeves from the bar, add according to the pattern on both sides 4 x in each 8th p. (4 x in each 10th p.), 5 x alternately in each 8th and 10th p. 1 p. = 34 (36) 39 p. After 24 cm = 46 p. (27 cm = 52 p.) 30 cm = 58 p. knit another 1.5 cm from the bar = 4 p. With neon yellow garter st, cast off all sts. Assembly: sew shoulder seams. On the edge of the neckline, cast on circular knitting needles with pistachio thread 40 (42) 46 p. neon yellow thread and 10 rounds. pistachio thread, then loosely close all loops. Sew in the sleeves, then sew the side seams and the seams of the sleeves.

Jacket (d) 24*68 Phildar

Sizes: a) 2 years - b) 4 years - c) 6 years - d) 8/10 years - e) 12/14 years

Yarn AVISO (60% cotton, 40% acrylic, 50 g / 68 m)

Color ANTHRACITE (grey) a) 6 - b) 8 - c) 10 - d) 12 - e) 16 skeins

Yarn PHIL TALASSA (75% cotton, 25% lyocene, 50 g / 81 m)

Color DENIM (denim blue) a) 1 - b) 1 - c) 1 - d) 1 - e) 1 skein

Needle size 5 for garter rib and 2/1 ribbing

Knitting needles No. 4.5 (for elastic band 1/2)

Knitting needles No. 3.5 (for stalemate)

Marking rings

A) b) c) 10 - d) e) 11 buttons with a diameter of 18 mm

USED PATTERNS:

Elastic band 1/2: 1 person.p., 2 out.p.

Garter rib: (see diagram) the number of loops is a multiple of 3 + 2

1st p. : all loops are purl

2nd p. : * 2 out.p., 1 person.p. *, repeat from * to *, finish 2 purl.

Elastic band 2/1: 2 persons.p., 1 out.p.

Garter stitch

KNITTING DENSITY:

10 cm in garter rib, needles No. 5 = 16 sts and 20 cm = 55 p.

Cast on: a) 53 sts - b) 59 sts - c) 65 sts - d) 71 sts - e) 83 sts on needle size 4.5 with AVISO ANTHRACITE yarn, work rib 1/2, starting and ending with the 1st p. and all odd rows (personal side of work) 2 out.p. within 4 cm.

Continue in garter rib on size 5 needles, starting with st 1 of chart.

Through a) 18 cm - b) 20 cm - c) 22 cm - d) 25.5 cm - e) 30 cm from the elastic band 1/2, form armholes, closing 1x7 sts on both sides.

It remains: a) 39 p. - b) 45 p. - c) 51 p. - d) 57 p. - e) 69 p.

After 8 cm from the beginning of the elastic band 2/1, form the shoulder bevels, closing on both sides in every 2nd p. :

B) 1x4 p. and 2x5 p.

C) 2x5 p. and 1x6 p.

E) 1x7 p. and 2x8 p.

At the same time, form a neckline, closing the central a) 5 p. - b) 7 p. - c) 7 p. - d) 9 p. - e) 9 p., then continue each side separately, closing 2 p. above a) b) 1x5 p. - c) d) 1x6 p. - e) 1x7 p.

Finish the second side of the neckline in the same way.

RIGHT SHELF:

Cast on: a) 25 sts - b) 28 sts - c) 31 sts - d) 34 sts - e) 40 sts on needle size 4.5 with AVISO ANTHRACITE yarn, work rib 1/2 starting from 1 th r. and all odd rows (personal side of work) 2 persons.p. and 2 out.p. (ending 2 izn.p.) for 4 cm.

Continue in garter rib on size 5 needles, starting from 2nd st of chart.

After a) 18 cm - b) 20 cm - c) 22 cm - d) 25.5 cm - e) 30 cm from the elastic band 1/2, form an armhole, closing 1x7 sts from the left edge.

It remains: a) 18 p. - b) 21 p. - c) 24 p. - d) 27 p. - e) 33 p.

Through a) 22 cm - b) 26 cm - c) 30 cm - d) 35 cm - e) 43 cm from elastic band 1/2, continue with elastic band 2/1, starting from 1 p. and 1 out.p. (ending 1 outp. and 1 person.p.).

After a) 5 cm - b) 5 cm - c) 4 cm - d) 4 cm - e) 3 cm from the beginning of the elastic band 2/1, form a neckline, closing from the right edge in every 2nd p. :

A) 2x2 p. and 2x1 p.

B) 1x3 p., 1x2 p. and 2x1 p.

C) 1x3 p., 1x2 p. and 3x1 p.

D) 1x3 p., 2x2 p. and 2x1 p.

E) 1x3 p., 2x2 p. and 3x1 p.

After 8 cm from the beginning of the elastic band 2/1, form a shoulder bevel, closing from the left edge in every 2nd p. :

B) 1x4 p. and 2x5 p.

C) 2x5 p. and 1x6 p.

E) 1x7 p. and 2x8 p.

Tie the left shelf symmetrically to the right.

Cast on: a) 30 sts - b) 32 sts - c) 34 sts - d) 36 sts - e) 40 sts on needle size 4.5 with AVISO ANTHRACITE yarn, work rib 1/2, starting and ending with the 1st p. and all odd rows (front side of work) a) d) 1 out.p. - b) 2 out.p. - c)e) 1 person.p. (2 purl in the center) for 3 cm.

Continue in garter rib on size 5 needles, starting with a) 2nd st - b) 1st st - c) 3rd st - d) 2nd st - e) 3rd st. scheme.

Add on both sides (gradually include the added loops in the pattern):

A) in every 12th p. 4x1 p.

B) in every 10th p. 6x1 p.

C) in every 10th p. 5x1 p. And in every 8th p. 3x1 p.

D) in every 10th p. 4x1 p. And in every 8th p. 6x1 p.

E) in every 10th p. 2x1 p. And in every 8th p. 11x1 p.

We get: a) 38 p. - b) 44 p. - c) 50 p. - d) 56 p. - e) 66 p.

After a) 21 cm - b) 25 cm - c) 29.5 cm - d) 35 cm - e) 42 cm from Rib 1/2, mark edge sts with thread of a different color and continue to knit straight.

Through a) 25.5 cm - b) 29.5 cm - c) 34 cm - d) 39.5 cm - e) 46.5 cm from the elastic, close all loops.

Knit the second sleeve in the same way.

COLLAR:

Cast on: a) 55 sts - b) 58 sts - c) 64 sts - d) 67 sts - e) 70 sts on needle size 5 in ANTHRACITE color AVISO, work rib 2/1, starting and ending with 1 th r. and all odd rows (personal side of work) 3 persons.p. for 8 cm, then bind off all loops.

FASTENING STRIPS:

Cast on: a) 60 sts - b) 66 sts - c) 72 sts - d) 81 sts - e) 94 sts on needles #5 in ANTHRACITE color AVISO, work rib 1/2, starting and ending with 1 th r. and all odd rows (personal side of work) 2 persons.p. for 3 cm, then knit 1 person.r. on the front side of the work and several rows of yarn of a different color.

These rows will need to be unraveled to the main yarn at the time of assembling the model.

Knit the second plank in the same way.

POCKETS:

Cast on 15 sts on needles #5 in ANTHRACITE with AVISO yarn, work in garter st starting from 2nd st for 8 cm, then bind off all sts.

Knit the second pocket in the same way.

Cast on 7 sts on needles No. 3.5 in DENIM color with PHIL TALASSA yarn, work in garter stitch for 7.5 cm, then bind off on both sides in every 2nd p. 3x1 p., fasten the remaining loop with a working thread.

Work 3 more pats in the same way.

Pin the details to the patterns and steam.

Complete the shoulder and side seams of the jacket. Sew the seams of the sleeves, sew the sleeves into the armholes.

Sew the fastening strips along the fronts with a single stitch on the front side of the jacket.

Sew on the collar, placing the edges of the collar in the middle of each clasp.

Perform a) b) c) 6 - d) e) 7 buttonholes, opening the loops in the 4th p. straps, 1st - 4 sts from the neckline, others at a distance of a) 9 sts - b) 10 sts - c) 12 sts - d) 11 sts - e) 13 sts from each other. Sew buttons opposite the loops.

Sew the pats in the center of the lower edge of each front, starting the seam on the wrong side of the model at the beginning of the 1/2 elastic, then turn the pats to the right side and fix by sewing on a button (see photo).

Sew along the bottom edge of each sleeve in the same way.

Place the pockets on each shelf 3 sts from the edge and the top edge at the place where the patterns change (see photo).
href="http://img1..JPG" rel="li-bigpic" target="_blank">

If you have a free minute or two, and your son or grandson has grown out of an old pullover or sweater, it's time to knit a zipper sweater for a boy with knitting needles. We offer the most interesting children's knitted sweaters for boys and we will be glad if you choose the right one for yourself. All models with diagrams and descriptions.

First of all, it will be easier for you to knit if you immediately decide on the size, since a lot depends on the height and other data of the child. Measure with a centimeter the length of the product, the volume of the hips, the length of the sleeve, starting from the neck to the palm, and write down all the data.

This interesting knitted sweater with a hood for a boy is suitable for young people 7-8 and 10 years old. The front of the jacket is decorated with intarsia (cat's muzzle), and the hood is a striped cat's tail ending in a braid of threads.

We knit a cat according to the scheme given below. The easiest way to knit such patterns is from individual balls, each section is its own ball. So that there are no holes in the pattern, we cross the thread on the wrong side, but do not tighten it much. All the time we make sure that the drawing does not decrease in the course of work.

For work you will need:

100% cotton yarn (10 (7-8 years) and 12 skeins (8-10 years) - 50 gr./50 m.). light grey.
Yarn wool black and white - 100 gr.
Knitting needles 3 and 3.5 mm thick.
Additional knitting needle 3.5 mm.
Pins or stitch markers.

We knit in 2 threads. It would be ideal to knit a “probe” 10/10 cm in order to determine how many stitches you need to dial, since the exact name of the threads is not indicated in the description. Most likely, these are strings of the “violet” type.

The density of knitting is indicated as: 21 p. / 29 p. Corresponds to 10/10cm. Designations: front - l., purl - out., loop - p. The main knitting is the front surface.

On needles 3 mm. we collect with light gray yarn 94 (102) p., knit an elastic band 1 l. / 1 out. Elastic band 3.5 cm. - 10 rows. Switch to 3.5mm needles. Next, knit in stockinette stitch. Knitted 123 (134) p. - 42 (46) cm. From the elastic we close the middle 32 sts for the neckline. Find the middle of the row and subtract 16 sts from one side and the other from the center. Next, we leave one half of the work for additional. knitting needle, and on the other half we close from the inside in every second p. 2 times 1 p. Next, close in this river. the remaining 28 (32) sts of the shoulder. Knit the second half from the auxiliary knitting needle symmetrically.

Make an elastic band the same as we did on the back. Next, we begin to draw a cat pattern: on 3.5 mm knitting needles. Next, we stop at the front river. and make a drawing: 18 (22) p. light gray, 58 p. - according to the scheme, 18 (22) p. light gray. For convenience, we find the middle of the picture and mark it with a pin (in the figure - an arrow). Next, we knit according to the scheme. When the scheme is completed - with the front surface of a light gray (main) color.

We knit 110 (120) rows 37 (41) cm. From the elastic we close the middle 24 points to decorate the neck of the product. Let's make the left side of the shelf first. To make a rounded neck, you need to close from the inside at the beginning of each p. 1 st each. So we close until (20 p.), until 30 (34) sts remain on the needles, this is the shoulder. We close these points. Do the right side symmetrically to the left.

Sleeves

We collect on the knitting needles 3 mm. light gray thread 44 p. and knit 10 p. elastic band 1/1. Next, comes the front surface. In the first r. add 6 p., get 50 p., then in every 5th p. add 1 p. on both sides. So we knit until there are 78 (92) sts on the knitting needles. It turns out 27 (32) cm. From the elastic we close all the sts of the shoulder. The second sleeve is similar to the first.

Hood

We sew the shoulders with a large needle with a gray thread. Next, find the middle of the back, mark it with a pin. on 2 knitting needles 3.5 mm. along the edge of the neck, we collect 116 sts with a light gray thread, (58 sts for each knitting needle), first we knit on the 1st knitting needle, then on the 2nd and at the end of the work we will sew these 2 halves. In the middle of the shelf, on the 1st knitting needle, we make a bar with an elastic band 1/1 on the first 5 loops. Knit the rest of the hood in stockinette stitch. From the back we will add loops and knit them with black and white yarn. If you want to make a regular hood, you can simply knit without adding anything up to the height of 56 rows and close all the stitches. If you want a striped hood, add white and black stripes on the left. Add 1 p. In each p. You will get 4 p. black yarn, 4 p. white, several stripes. We do this:

1st p.: 58 p. persons. gray yarn, add 1 p. black pr.
2nd p: 2 p. out. black pr., 58 p. out. gray ave.
3rd p.: 58 p. persons. gray pr., 3 p. persons. black ave.,
And so on.

Tied up to 56 p. and closed the st. On the 2nd knitting needle, do the same as on the 1st. Don't forget 5 sts of rib at the beginning. Next, we make, if desired, a pigtail of 20 threads of 2 or 3 colors, tie at the bottom with a black thread.

Assembly

Sew our hood on the wrong side, not forgetting to insert a pigtail. Next, unfold the sleeves and sew to the shelf and back. Sew the inside seams of the sleeves, and then the side seams of the product.

A blue knitted sweater for a boy is a great option for cool weather. Convenient button closure makes it comfortable and versatile. We tried to explain everything in detail, so that the master class was understandable even for beginners. Cardigan sizes for a boy: a) 4 years old, b) 5-6 years old, c) 8-9 years old, d) 10 years old, e) 12-13-14 years old.

Abbreviations: row - p., front - persons., purl - out., loop - pet., together - vm., edge - edge.

For work you will need:

Yarn Alpaca cashmere (48% alpaca, 52% acrylic), 100 gr. - 133 m. - 8-9-11-14-16 hanks.
Knitting needles 3 mm thick. and 3.5 mm.
Buttons 5 pieces 20 mm. diameter, buttons 10 mm.
Large eye needle.

The main pattern is the front surface, the bottom of the sleeves and the bottom of the jacket are elastic 1 face / 1 out., The pattern on the shelf and collar is patent elastic.

Patent gum, sample.

Scheme for a patent gum, option 1.

Patent gum can be of several options, but we chose option 1, it fits like this:

We collect an odd number of p.

1st p.: hem., * 1 p. and nakid - remove, as out., 1 person. *, repeat from * to *, finish: 1 p. and nakid - remove, hem.

2nd p.(outside row): hem., * 1 p. and nakid - we knit vm. persons., 1 p. and yarn over * - remove, as out., repeat from * to *, finish: 1 p. and yarn over - knit vm. persons., kromoch.

3rd p.(person. R.): Kromoch., * 1 p. and yarn - remove, as out., 1 p. and yarn - knit in. persons *., repeat from * to *, finish: 1 p. and yarn over - remove, as out., Kromoch.
Repeat 2nd and 3rd rows.

In principle, the collar can also be tied with a simple elastic band, 1 person / 1 out. or you can - patent, as you like.

Samples:
10/10 see faces. satin stitch - 23 p. / 30 p.,
10/10 cm. Patent rubber band - 22 p. / 50 p.

We collect on knitting needles with a thickness of 3 mm. a) 79 p., b) 85 p., c) 91 p., d) 97 p., e) 111 p., Knit with an elastic band 1/1. At the beginning and end of the first river. - 1 out. We knit like this 6 p. (2 cm).

Next, we switch to knitting needles 3.5 mm., Knit stitch to a height of 24-26-28-31-34 cm, which corresponds to 120-130-140-154-170 p. from the elastic, we make armholes, on both sides you need to close 10 p.: on the one hand - close 5 p., 1 in each p., And on the other - 5 p., 1 p. in each p. Knit to the point of the beginning of the shoulder just 14-16-17-18-21 cm, including the armhole. Remaining on needles: 69-75-81-87-101 sts.

We divide the back in half, mark this place with a pin. At the distance from the elastic: 38-42-45-49-55 cm p., then we remove one half (6,7,8,8,10 p.) on an additional knitting needle, on the working knitting needle we close 2 more times for 5 p. Then return to the additional. knitting needle and knit symmetrically the second half of the neck. Then we make out the shoulder: at a distance from the elastic band 38-42-45-49-55 cm (166-182-196-216-238 rubles) close from the side. armhole in every second row:

2 times for 9 p.,
2 p. 10 p.,
2 p. 11p.,
2 p. 12 p.,
2 p. 15 p.

Shelf right

We collect on knitting needles with a thickness of 3 mm. 37-41-43-47-53 p., we perform an elastic band 1/1 6 p. (2 cm). Next, we switch to knitting needles 3.5 mm., We perform a patent gum:

15 rows
16 p.,
18 p.,
20 r.,
22 p.,

Then, at a height of 26-28-31-34-37 cm (130-138-154-170-172 p.) make 1 decrease, (the beginning of the neck). To get a beautiful neck, we must remove evenly: 9-11-11-15-17 sts along the neck, do not touch the shoulder yet. Therefore, we remove in every 4th p. 1 p. (for all sizes).

We form the shoulder. At a distance from the elastic band 38-42-45-49-55 cm (166-182-196-216-238 rubles) close from the side. armholes in each second row:

2 times for 9 p.,
2 p. 10 p.,
2 p. 11p.,
2 p. 12 p.,
2 p. 15 p.

We knit the left shelf symmetrically with the right.

Sleeves

We collect on the knitting needles 3 mm. 48-50-52-54-58 p. and knit 5 cm with a simple elastic band 1/1. Next, continue with the smoothness on the knitting needles with a thickness of 3.5 mm. Our task is to add on the sleeves 16-22-26-28-38 p. On the sleeve add: in every 4th p. 1 p each. This should be done in the middle of the row. We knit to a height of 20-25-29-32-38 cm, not counting the elastic. This will be the 62nd-76th-88th - 98-114 p. from gum.

It turns out as a result at the starting point of the okat - 64-72-78-82-96 p.

Then we need to draw up the sleeves, for this we subtract from each side:

3 times three sts, 4 times two sts, 2 times three sts.
2 times four p., 1 p. three p., 3 p. two p., 2 p. three p., 1 p. four p.
2 times 4 p., 2 p. 3 p., 1 p. 2 p., 2 p. 3 p., 2 p. 4 p. (reduction literally: 1 time - 1 p.)
1 time 5 p., 1 p. 4 p., 2 p. 3 p., 1 p. 4 p., 1 p. 5 p.
1 time 6 p., 1 p. 5 p., 1 p. 4 p., 1 p. 5 p., 1 p. 6 p.

Tied up to a height of 26-31-35-38-44 cm and close the rest in one river. - 17-18 p. Make the second sleeve symmetrical to the first.

Fastener strip

On knitting needles 3 mm thick. we collect 13 p. and knit with a simple elastic band 1/1. All odd r. start and end with two persons. p. We knit a strip with a height of 29-32-35-39-44 cm. Make the second strip similarly to the first.

shawl collar

On knitting needles 3.5 mm. Cast on 93-99-103-107-113 sts and work in Patent Rib. After having done 14 p. (3 cm), further, close every. sides like this:

In every 2nd p.: * 1 time 1 p. and 2 times 2 p. * repeat from * to * a total of 7 times.
In every 2nd p.: * 1 time 3 p., 2 times 2 p., then in each. 2nd p.: * 1 time 1 p. and 2 times 2 p. * - repeat from * to * 6 times.
In every 4th p.: 5 times 2 p and further in each. 2nd 14 times 2 p.
In every 2nd p.: 1 time 3 p., 2 times 2 p., then in each 2nd p.: * 1 p. 1 p. and 2 times 2 p. * - repeat from * to * 6 times., Further, 1 p. 1 p. and 1 p. 2 p.
In every 2nd p.: 1 time 3 p., 2 times 2 p., in each. 2nd p.: * 1 time 1 p. and 2 p. 2 p. * repeat from * to * 6 times, then 2 times 2 p.

Tied to a height of 11-11-12-12-12 and cast off 23-25-27-27-31 sts.

Assembly

First we sew the shoulders and seams of the sleeves, then the side seams. Sew the sleeves into the armholes. Then we sew the strips to the shelves on one side and the other. We find the middle of the neck of the back. We are looking for the middle of the collar. We combine these points, we cut off with pins. We sew the shawl collar to the neck, the ends to the slats. We make 5 loops for buttons, pushing the 8th p. First 1 cm from the bottom and the rest - in places 2 p. persons. smooth. We sew the buttons opposite the p. In order for the collar to cover the throat, you can sew buttons in addition to the buttons. The pattern is suitable for boys of different ages, as well as for three and five years.

An excellent children's knitted sweater for a boy, decorated with 2 types of braids, with a comfortable hooded collar, will come in handy in cool weather. Knitting a sweater for a boy is very simple, it can be made from wool, wool with acrylic, or yarn with cotton.

Not everyone has the opportunity to buy exactly the yarn that is recommended for this particular blouse - pick up threads of the same thickness. If the thread is thin, knit in 2 threads. The main thing is that your “probe” matches the knitting density of this sweater.

The knitting density is:
10/10 cm. Knitting needles 5 mm. front stitch - 18 loops / 25 rows.

Description and pattern are given for a boy 4,2,6,8 years old.

For work you will need:

Yarn New York (50% wool, 25% alpaca, 20% polyamide), 50 gr./110 m. 250-200-300-350 gr.
Knitting needles 4.5 and 5 mm thick.
Thick needle for sewing.
Additional knitting needle for the pattern.

The patterns that are used in this product are often used for jumpers:
Pearl pattern:

1st p .: * 1 person., 1 out. * - repeat from * to * to the end of the row.
2nd p .: * 1 out., 1 person * - repeat from * to * to * to the end of the p. That is, over persons. - out., and vice versa.

Rubber band double:

1st p.: 2 persons., 2 out. - repeat to the end.
2nd p .: how the mating looks - persons. p. knit facial, out. - purl.

Type of braid number 2.

Braid number 2 is performed according to scheme 2. All even rows are knitted the way the knitting looks (that is, over the out. P. - out, over the faces. P. - faces.). All other rows read from right to left.

Cast on 4.5 mm needles. 62-56-68-74 sts. First work 14 rows in double rib. Next, change the needles to 5 mm. and knit 8-5-11-14 p. with a pearl pattern, 1 person., 6 p. according to “braid pattern number 1”, 1 person., 7 p. pearl, 1 person., 14 p. “braid pattern number 2 ”, 1 person, 7 p. pearl, 1 person., 6 p. according to “braid pattern number 1”, 1 person., 8-5-11-14 p. pearl knot.

Continue to 27-23-31-35 cm from the beginning of the back. To decorate the armhole, we close 3 sts on each side, then 2 sts, and 1 st each. Further, without reductions. Tied up to 43-38-48-53 cm from the beginning of the back and close the remaining stitches.

Before

We take knitting needles 4.5 mm. and we dial 62-56-68-74 p. We knit 14 p. double rubber band. We change the knitting needles to 5 mm. and knit like this: 8-5-11-14 sts with pearl knots, 1 person, 6 sts according to “braid pattern number 1”, 1 person, 7 sts with pearl knots, 1 person, 14 sts. according to “braid pattern number 2”, 1 person., 7 p. pearl knot, 1 person, 6 p. according to “braid pattern number 1”, 1 person., 8-5-11-14 p. With this pattern we knit to a height of 27-23-31-35 cm from the beginning of the front. Then, for the armhole, we close on both sides 3 sts, 2 sts, 1 st each. After we have reached 40-36-44-48 cm from the beginning of the front, we close 12 sts under the neck in the center of the front. Further, on both sides of the neckline, we close 3 sts, 2 sts, 1 st each. After we knit to 43-38-48-53 cm, we close all the remaining sts.

Sleeves

We collect on knitting needles with a thickness of 4.5 mm. 28-24-32-36 p. We perform 14 p. double rubber band. Next, change the needles to 5 mm. and do this: 10-8-12-14 p. with a pearl pattern, 1 person., 6 p. according to “braid pattern number 1”, 1 person., 10-8-12-14 p. pearl. uz. Then we knit in such a pattern, not forgetting to add from both edges in each sixth row eight times.

After 28-25-31-34 cm is knitted from the beginning of the sleeve, close 3 sts on both sides of the sleeves, and then, close 1 st on both sides in each 2nd p. 9 times. This is the sleeve collar. When the length reaches 38.5-34-42-47 cm, close all stitches. We knit the second sleeve in the same way.

Hood

We take knitting needles 5 mm. and we collect 64-58-70-76 p. on them and perform the following pattern: 3 p. with a double rubber band, 7-4-10-13 p. pearl. pattern, 1 person., 6 p. according to the “braid pattern number 1”, 1 person., 28 p. pearl knot, 1 person., 6 p. according to the “braid pattern number 1., 1 person., 7-4 -10-13 p. pearl. pattern, 3 p. double rubber band. So we continue to knit 3 cm (8 p.) From the beginning of the hood. Further on both sides of the 2 central sts, add 1 st in each 2nd p. 3 times.

Further, we reach 20-18-22-24 cm from the beginning of the hood and begin to decrease 1 st from 2 sides from the 2 central sts in each 2nd p. 4 times. Fold the hood in the middle and distribute the stitches of the hood evenly over 2 knitting needles. Close the stitches of the 2 halves of the hood, as if purl with the help of the 3rd knitting needle.

Assembly

First we sew the seams of the shoulder. Sew the hood along the entire cut of the neck. Sew side. seams of sleeves and a back with a shelf. We make 2 pompoms and sew them in the place indicated in the diagram.

Knitted jacket with a zipper for a boy 6-8 years old. Decorated with jacquard with horses. Description and knitting pattern are attached.

Knitted sweater for a boy 2-3 years old. Knitted from multicolor yarn (wool with acrylic) on 4 mm knitting needles. A 48 cm long zipper is suitable for a sweater for a boy of 3 years.

Gray sweater for a boy 5, 6, 8-10, 12, 14-16 years old is decorated with simple braids and yellow trim. Suitable for both baby and teenager. Click on the arrow to enlarge the picture.

It is very easy to knit such a jacket for a child or teenager, a description and diagrams are present.

Wonderful jacket for a 1 year old boy. The pattern is also given for the age of 3, 6 months, one and two years. Mishka's muzzle is embroidered with straight stitches.

You want to knit a jumper for a boy with knitting needles, but you are faced with the difficult task of choosing the right option. After all, the possibilities of knitting are endless, and the choice is very large. Decide on a knitting pattern and choose the right model, and we will help you create great clothes for your child.

Schemes and patterns

Before you start knitting a jumper for a boy with knitting needles, you should choose the right pattern and patterns and, of course, get inspired. Your desire will also be important.

To start knitting, patterns, patterns are easy to pick up. Don't worry if you are new to this. The article will tell you how to knit a jumper with knitting needles, which pattern is better to choose. At first, limit yourself to a simple pattern and choose a pattern that is close in spirit to your child.

When you put your imagination into knitting, patterns become your secret weapon for adding color and texture to your decor. They will help make it original and beautiful.

Knitted jumper: description

We will knit a simple jumper. For a product with a height of 86 cm, you will need 200 g of yarn (in our case, these are 2 balls of 100 g each). The composition of the yarn is 49% wool and 51% acrylic. We use knitting needles No. 4 for the main fabric and No. 3 for elastic.

Before you start knitting (jumper for a boy), you need to correctly determine the number of loops, so dial 20 loops on knitting needles No. 4 and knit the sample in this way:

1st loop - edge;
then 6 facial loops;
2 purl;
for a pigtail - 6 facial loops, 4 purl loops and 1 edge loop.

You need to knit a pattern for 26-30 rows. Then wash and see if he sat down or stretched out. We measure the sample, in our case it is 9 cm.

A child with a height of 86 cm has a chest circumference of 55 centimeters. Thus, we calculate: we multiply 20 loops by 55 cm (the girth of the child’s chest) and divide everything by 9 cm (sample length) we get 122 (the required number of loops for knitting).

If your numbers do not match our example, then substitute your own to get the size of the jumper you need.

Since we have a product with a pigtail, and, as you know, pigtails pull the product together, the number of loops in the front should be more than on the back. We divide the loops in this way:

back - the number of loops is 58;
before - 64 loops.

Steps of knitting a jumper

To make the edge of the gum elastic, we will dial the loops in this way:

We measure the required length of the thread, throw it on the thumb. We put the thread from the ball on the index finger, we clamp the thread at the bottom.
Only one knitting needle is needed to cast on. This type is called an elastic band with an elastic edge or an Italian set of loops.
We insert the knitting needle into the loop near the thumb, hold the thread with your finger, take it with the knitting needle from the index finger and drag it through the loop.
Lower the thread and tighten the loop. The first loop is ready.
We start the knitting needle under the thread and grab it from the index finger as well. This loop is similar to the front. Next, we do the same action in the opposite direction, thereby getting the wrong side.
We collect in turn the purl and front loops, the penultimate loop of the product should be purl, and we do the last in the same way as the first, tying a knot at the end.

The front of the jumper has 64 loops, we collect 56 on the knitting needles, in other words, 8 loops less than it should be.

We start knitting the first row. To do this, we remove the extreme loop, we knit the second loop with the front one, we also remove the wrong one, transferring it by the thread. Then again the front loop, we knit it again. Thus, we remove all the wrong loops, and we knit the front loops to the end of the product. We always knit the last loop with purl, this is necessary to form a pigtail on the side of the product.

We knit the second row in the same way as the first.

From the third to the twelfth row we knit, alternating - 1 purl and 1 front. There should be 10 such rows.

We remind you that the elastic band decorating the jumper for the boy is knitted with knitting needles No. 3. And we have only purl loops.

The pattern is done with knitting needles No. 4. In the first row, you need to add 8 loops that we left before starting knitting gum.

In our case, the drawing consists of three types of patterns. If you have more loops than in the proposed version, then you need to add additional loops either in the middle of the pattern or along the edges. The drawing itself consists of 16 faces.

From the edge we knit 14 loops, alternating through one and adding 2 additional ones.

Jumper base

We start knitting the base:

The edge loop is removed.
Add 1 loop.
Next is the front.
Purl.
Facial.
Purl.
1 front loop is added.
Purl.
Facial.
Purl.
Facial.
Purl.
Facial.
Add 1 purl loop.
Purl.
Purl.

We turn to the drawing, continuing knitting (jumper for a boy):

5 knit loops for the pigtail pattern;
we add the sixth front loop;
2 purl.

Central drawing:

4 facial;
1 front loop is added;
6 facial;
1 front add;
4 facial.

2 purl;
1 front add;
5 facial;
purl;
1 purl is added;
facial;
purl;
facial;
purl;
facial;
1 purl is added;
facial;
the last loop is necessarily wrong side.

If everything is done correctly, you will get 64 loops.

We knit the purl row according to the pattern of a jumper for boys with knitting needles. Schemes for side loops will be used in the form of a checkerboard style. In other words, we knit the purl loops with the facial ones, and the facial loops with the purl ones. So we knit 4 rows.

Creating a pigtail pattern for a jumper for boys with knitting needles

Schemes of the 5th row of basic knitting also have a checkerboard pattern. We need to swap the first three loops of the pigtail with the next three, for this we need to remove all 6 loops on the right knitting needle and first put on the first three removed loops on the left knitting needle, and then the next three. We knit them with facial loops - this is how the first pigtail will turn out. If desired, you can increase the height of the rows by adding 2 rows, but do not be zealous, otherwise the pattern will lose its appearance.

We knit the next six loops of the pattern in the same way as the first pigtail. And we repeat, increasing knitting by 4 rows in our case. If you had more rows in the first turn of the pigtail, then we knit the same number. In total, such turns are needed 6 through 4 rows.

And after that, we begin to reduce the front half by 3 loops in the first row. In the second row - two loops, and the third row - 1 loop. We continue knitting, increasing the pigtails by three turns in height.

Decide where you will have the neck and close the middle loops. Knit the required height of the product (in our case, 6 rows were enough).

The back of a jumper for a boy

To knit the back of a jumper for a boy with knitting needles, you need to dial 54 loops and knit an elastic band in the same way as the front.

In the main figure, at the same time, we add 2 loops symmetrically both on the right and on the left. The pattern is knitted in a checkerboard pattern, and the loops are reduced similarly to the front half of the product.

We knit a sleeve

To fully knit a jumper for a boy with knitting needles, you need to make sleeves. To do this, dial 40 loops and tie an elastic band in the same way as the front and back. In order for the sleeves to be the same, try to knit both at the same time. The height of the gum is 8 rows.

We proceed to the descent of the loops. We decrease by 3 loops, by the way of descent. The next row is reduced in the same way by 2 loops. We repeat the same steps further: 3 loops, 2 loops and the rest we close in the same way of descent.

The height of the sleeve was 29 cm, the width was 13 cm. At the bottom, the width of the sleeve was 7 cm. The inner part was 21 cm.

Assembly of parts for a jumper, processing of the neck

Sew all the pieces together

We crochet loops on the neck on the right side - 82 loops. We knit the first row with knitting needles. We knit the next two rows with the front. We repeat the same from the wrong side. The number of loops should be the same as in the front, in our version it is 82 loops.

We knit similarly to the front side 1 row of the wrong side and the next two loops of the front ones. Next, with a knitting needle, we knit the loops from the wrong side and the front together. We pass 4 rows in height and close all the loops.

So you learned how to knit a jumper for a boy with knitting needles!