How to tie a St. George ribbon diagram for school. How to make a bow from a St. George ribbon in stages? What does the St. George ribbon symbolize?

Soon all Russians will celebrate the great Victory Day. Nowadays, it is associated with a narrow ribbon, which consists of 3 black and 2 orange stripes. However, not everyone who wears it knows about its origin. It appeared back in 1769 along with the Order of St. George, which is why it is called the St. George Ribbon.

It has become very fashionable in recent years to wear the St. George ribbon not only on clothes, but also on bags and even cars. Most Russians do not know how to tie it beautifully. Moreover, there are no certain rules in wearing it.

Today it is very popular to wear a ribbon folded in the form of a variety of shapes. Before the holiday, you should not rush to buy a ribbon, but you can try to tie it yourself.

However, you do not need to follow fashion trends or repeat after others. In honor of the memory of the heroes and as a sign of respect, it is recommended to attach a ribbon to clothes on the left side. Thus, the symbol will not be desecrated, but on the contrary, respect will be shown to the memory of the dead.

You can attach a ribbon with a safety pin or by making a brooch. The base for the brooch can be purchased at a craft store. If this did not work out, an ordinary pin will come to the rescue.

How beautiful to tie a St. George's ribbon

Loop or tick. This is the simplest and most common option that anyone can do. To do this, the tape must be folded crosswise and pinned to the clothes with a pin.

Lightning or zigzag. The tape must be folded in the form of the English letter N.

Tie. For this option, you need a long tape. It must be wrapped around the neck so that the length of the tips is different. The ends must be crossed, and the right must be threaded around the left. Thus, a loop should be obtained, from which you need to pull out the end and thread it into the eye.

May. The ribbon must be folded in the form of the letter M. Using two pins, attach to clothing.

Butterfly. The method is similar to a tie, only in this case you will need to thread the long end into the loop, and fold the short end in half so that you get a bow. After straighten the ends.

Scarf. Tie the ribbon around the neck in a knot and point the ends to the left side.

Tube or loop. Roll the ribbon with both hands into a tube to form a circle. Its ends must be pinned with pins.

Flower. It is necessary for this option to have two ribbons - fold the first with an accordion with the same loops, then fasten it with a paper clip. Fold the second one in the same way, and then lay it on top of each other.

figure eight bow. To do this, you need a long and a short ribbon, as well as 2 black ones. A segment of 25-30 cm must be folded into a figure of eight and the edges fixed. At the junction, you need to tie with a short tape. Of the black ones, you will need to fold the cross, and then fasten all the elements.

Bow in the shape of a man. It is necessary to cut ribbons 24, 14, 10 and 7 cm long. From the long one, you need to make a loop, roll the next two into a ring, press and put on top of each other, while securing with a pin. Wrap this place with the smallest segment. After that, the entire workpiece must be put on a loop and sewed or glued with a glue gun all the details.

The fact that the people remember their significant deeds. An awkward and shameful moment is the realization that, having acquired such a valuable attribute, you go to the extreme of not knowing how such a precious symbol should be beautifully and correctly tied.

First, let's determine where she appears. would be appropriate: on the handles of a handbag, on a side mirror, on a car antenna, in the form of a symbol - decoration with a bow on clothes.

It is forbidden to decorate with St. George's ribbon: hair, dog collar, jeans belt. According to traditions, the St. George ribbon must be slaughtered by a society whose relatives were touched by the war years; citizens who know and understand what the price was for the sake of the taste of triumph and happiness of future generations; remembering and filled with pride for their homeland and its ancient past. This symbol of Victory should not be used as a regular decoration.

It is also unacceptable to use it in an inappropriate way. For those who do not want to break traditions and show disrespect for military personnel, there are tips on how to use the St. George ribbon, properly form it into a bow and attach it.

How to tie a St. George ribbon

1. First, lay the tape on a straight surface and grab it by the right end.

3. A similar process must be carried out with a different ending.

4. Without additional fastening, such a bow cannot keep its shape and will open, from this we pierce it in the area where the limbs are crossed with a sewing pin and at the same time fasten it to the surface of the garment.

5. Hold both ends of the ribbon with your fingers.

6. Place the left ending on the right, then draw near it and pull the end of the tape down at a right angle on the right side, and up on the left.

7. Thus, the initial node is formed.

8. Then lay the lower end in this way to form a half bow.

9. In the next step, you need to find a half bow with the other unused end and tighten it into a loop almost to the end to create the next half bow.

10. And finally, pull both loops horizontally in opposite directions, after which you need to tighten the knot.

How to tie a bow with an elastic band:

Now the bow - the symbol has come to an end, we fix it to outerwear, a purse, or to a car. Create your own symbol - the St. George ribbon and wear it in honor of Victory Day and as a sign of memory of the fallen soldiers and pride in your Fatherland.

How beautiful to tie a St. George ribbon (bow) - video

May 9 is an international holiday - the great Victory Day. Every year, many people come out to celebrate and walk to congratulate and thank the veterans for their great feat. The Ribbon of St. George has become an integral attribute of war and victory. Every veteran has it and the celebration is always decorated with this symbol. Making a bow from a St. George ribbon with your own hands for a veteran or just decorations is an easy task. Even high school students can cope with it at labor lessons or at home. Any veteran would love this gift.

Let's present several options for step-by-step sewing of bows from the St. George ribbon of different materials and varying complexity.

George's bow

Materials:

rep St. George ribbon 57 cm long;
black satin ribbon 36 cm;
orange satin ribbon 30 cm;
lighter or candle;
needle with thread;
glue "Moment";
black bead or half bead.

We carry out the production step by step. We cut off 15 cm of the St. George ribbon. We fold it with an acute angle. We cut off 6 pieces of the St. George ribbon, 7 cm each. We also fold them with an acute angle and bend them. Having made two folds from below, we process the edges with fire, fastening them. We do the same with the remaining five cuts. We collect the petals at the bases in a flower, tightening the thread. We glue it to the workpiece. We make 6 pieces of 6 cm from a black satin ribbon. Using the method described above, we make 6 petals.

We sew them at the base into a flower. We glue it on the workpiece so that the petals are in a checkerboard pattern. We cut the orange satin ribbon into 5 pieces of 5 cm each. We make the petals, as before. Sew into a flower and glue on top of a black flower.

In the middle we glue a black bead or half bead. St. George's bow is ready. Can be attached with a pin or blank for brooches to clothing, accessories. You can sew on an elastic band for hair.

With tricolor

Another simple option for making a brooch can be such a simple option with a ribbon, bow and flower.

Materials and tools:

St. George ribbon 3 * 18;
tricolor ribbon 25;
thermal gun or glue "Moment";
needle with thread;
scissors;
pin or brooch base.

Let's start sewing. From the St. George ribbon cut three pieces of 18 cm long.

To understand where the middle of the segment is, fold it, as shown in the photo.

Fold another piece in the same way.

Lubricate the first cut at the bend with glue.

While the glue is not dry, glue the second prepared part.

We bend the third 18-centimeter cut with an acute angle.

Glue it on the back side of the prepared bow.

We cut the ends of the tape obliquely and process it with a candle or a lighter.

We cut the tricolor ribbon into 5 pieces of 5 cm each.

We bend the cut in half and sew it as shown in the photo.

Without cutting the thread, we collect all the cuts of the tricolor.

Now we tighten the thread. Fasten and cut. It turns out a flower.

Flatten the petals of the flower and glue it to the workpiece.

Glue a half bead into the center of the flower.

On the wrong side of the brooch, put a few drops of glue and attach the blank for the brooch.

A bow from a St. George ribbon is simply and quickly made with your own hands!

With kanzashi flower

A good decoration by May 9 will be a kanzashi bow. Below is a master class on making a very beautiful flower.

Necessary materials:

St. George ribbon 1 meter;
black satin ribbon 1.2 cm wide - 80 cm;
orange satin ribbon 1.2 cm wide and 65 cm long;
orange satin ribbon 2.5 cm wide and 22 cm long;
gold brocade 2.5 cm wide and 25 cm long;
felt circle 3 cm in diameter;
gold thread 20 cm;
black beads for decoration and a black half-bead for the middle of the bow;
blank for a brooch or pin;
scissors;
glue "Moment" or thermal gun;
candle or lighter.

Let's start modeling. From an orange ribbon 1.2 cm wide we make 13 strips of 5 cm each. From a black satin ribbon 1.2 cm wide we make 16 cuts of 5 cm each. Kanzashi must be made from blanks. To do this, take the first piece of tape, lay it vertically and bend approximately in the middle so that a right angle is formed. Then, the part that was folded to the side is folded down. Parts of the right angle are compared in this process and the “roof of the house” comes out. We assemble the base of the part with an envelope, process and fix it with fire or glue.

Repeat the above steps for all prepared cuts. There should be 13 orange and 16 black kanzashiks.

We cut an orange ribbon 2.5 cm wide into 9 pieces of 2.5 cm each. Put one square with the satin side down and connect the opposite corners. Once again, bend the height of the triangle. We fix the edges with glue and straighten the single kanzashi. We cut the golden brocade ribbon into 10 pieces of 2.5 cm each.

We form 9 orange single kanzashi and 10 exactly the same gold ones.

We cut the golden thread into 3 parts: 2 pcs. 6 cm and one 8 cm each. We string several black beads on each cord. Glue shamrocks of orange 2.5 cm kanzashi to the edges, as shown in the photo.

We glue the golden petals into 2 branches, starting from the top part. Thus, two branches will turn out.

On the felt circle prepared earlier, glue the black petals in a circle.

This must be done carefully and symmetrically. Petals can overlap, but only in one direction.

Glue the orange petals in the same way. The corners of the petals are staggered. So the flower will look more voluminous.

We decorate the center of the orange flower with a half-bead. Behind, on felt, we glue the prepared laces.

Behind the black petals, in the upper part of the bow, we glue the golden branches. We form a St. George loop, glue it at the place of weaving and glue a ready-made flower. We glue the mount on the back of the tape. Ready!

Video on the topic of the article

The St. George Ribbon has been a constant symbol of victory for many years. Few know its history and understand the importance of this attribute. Where to wear a St. George ribbon, how to tie it beautifully - you will find the answers in the article.

The wearing of a ribbon folded in the form of various shapes is gaining popularity. It is not necessary to purchase this symbol, you can tie the ribbon yourself on the eve of Victory Day.

How can you beautifully tie a St. George ribbon?

There is no difficulty in tying the ribbon yourself for the purpose of decorating clothes, a bag. You can even tie a ribbon on the car beautifully. Although it is becoming popular to decorate with a ribbon whatever you want, in honor of the memory of the heroes and as a sign of respect, attach the ribbon to the clothes on the left side. So you do not desecrate the sacred symbol, but show respect to the memory of the fallen. You can attach a ribbon by securing it with a safety pin or by making a brooch. You can purchase a base for a brooch or use a regular pin.

Several ways:

A loop
lightning
Letter M
butterfly
bow
Tie
star
rosette
Flower
You can make a kanzashi brooch from a St. George ribbon

How to tie a St. George ribbon step by step

As mentioned above, tie a ribbon loop- the most common and easy way. The main thing is that one end of the loop is slightly higher than the other.

St. George Ribbon

To get a figure - lightning:
Fold the tape in three
Pull the top end to the right

St. George ribbon - lightning

Ribbon in the form letter M:
Fold the ribbon in half 2 times
Pull the top end to the right
bottom - left

How to tie a St. George ribbon with a bow?

classic bow can be easily obtained by folding 2 loops. Pin the middle with a pin, where the two ribbons overlap. If you tie a ribbon around the middle, wrap it with a thread or secure with an elastic band, then the bow will look more elegant.

For St. George's bow more difficult, you will need 4 pieces of the St. George ribbon.

Cut pieces from the tape 18, 9 (x2), 5 cm long
Fold the long piece in half so that the joint is in the middle

With a 5 cm cut, wrap the resulting workpiece in the middle, closing the joint. Secure everything with glue or thread
In two identical segments, pull off one edge and cut the other with cloves
Attach the ends to the workpiece

Interesting bow in the shape of a man you can fold from 4 pieces of the St. George ribbon

Cut ribbons 24, 14, 10 and 7 cm long
Make a loop out of the longest ribbon
Roll the ribbons of 10 and 14 cm into a ring, press and lay on top of each other, securing with a pin
Wrap with a 7 cm ribbon at the point of attachment with a pin
Place the workpiece on the prepared loop
Fasten all the parts together with thread, glue gun or pins
You can decorate the center with a flower or a rhinestone

From a very long ribbon you can make chic bow:

Lay the end of the tape on the table (about 35-40cm)
Lay the tape on top of it in layers, make each row shorter by 4-6 cm on each side
Leave the end of the ribbon about 20cm long from the center of the bow
Secure the layers with a pin
Cut the ends in a zigzag and place in a corner

Figure eight bow looks unusual, but it is very simple to make it:

Take a ribbon 25-30cm long
Fold the tape into a figure eight, fasten the edges
With a smaller ribbon, tie a figure eight at the junction, secure
From two black ribbons 20-25 cm long, fold a cross
Connect all the details

How to tie a St. George ribbon with a tie?

Such a tie looks beautiful and unobtrusive, especially on kids.

Wrap the ribbon around so that the right end is longer than the left
Lay the left end on the right, passing under it crosswise
Make another circular weave, forming a loop
Pass the right end into the loop formed, moving from the bottom up.
Pull it out of the loop, then thread it into the eyelet
Tighten

The algorithm for tying a St. George ribbon is no different from tying a regular tie and amazes with a variety of knots. I suggest you familiarize yourself with several more complicated schemes:

How to tie a tie

How to tie a St. George ribbon with a star?

In order to make an asterisk from a St. George ribbon, you will need 5 pieces 6 cm long.

Sew the piece in half in the middle
Bend the segment to form a beam
Repeat the same with the rest of the segments.
Gather all the rays together and form an asterisk

You can make a bow, as described above (bow-eight), from two segments connected by a cross. Place a star in the center of the bow - this way you will get a wonderful brooch

To get a pointed star:

Cut 5 pieces of tape 6 cm long
Fold the piece in half and cut at an angle. As a result, you will get a trapezoid
Solder the cut points with a soldering iron or, in extreme cases, sew or glue them
Turn inside out
Repeat the procedure with the remaining four segments.

Next, you can connect the rays with a soldering iron. Depending on which sides you connect the rays, you will get different versions of the star.

A star from a satin ribbon looks beautiful. If you don't have a soldering iron, you can solder the ends with a lighter or over a candle flame.

Cut 5 lengths of 3.5 cm and one - 11 cm
Fold the short piece in half horizontally and solder one side
Unfold to make a corner
Fold the edge over to the next black line, repeat for the second edge.
Solder the end

Repeat the operation with the rest of the segments
connect rays
Fold a long segment with the letter L, after cutting the edges with cloves
Connect the parts, you can add some kind of decoration to the center

Video: How to tie a St. George ribbon with a rose

How to tie a St. George ribbon with a flower, diagram

Prepare five pieces of St. George's ribbon 6 cm long and one piece 15 cm
Fold each short section in half
String all the petals on a thread and tighten it, forming a flower

Fold the long piece into an L
Sew the flower to the ribbon
You can decorate the middle with a rhinestone or a badge

How to tie a St. George ribbon on a car and on a bag?

The St. George Ribbon is a symbol of victory, a tribute to the heroes, so keep an eye on its appearance. It is unacceptable to use a tape instead of laces or a collar for a dog or cat. If you don't want to attach the tape to your clothes, you can tie it around the handle of your bag, your car's antenna, or your rearview mirror.

How to tie a St. George ribbon beautifully, video

The St. George Ribbon, as a rule, is worn on a holiday as a tribute to past events. Most often, a simple loop is made from it and attached to clothes or even tied to the handle of a bag. But there are other options, for example, you can make a bow from a beautiful St. George ribbon quickly and easily with your own hands, turning it into a beautiful festive accessory. The various ways of making such a commemorative decoration will be discussed in this article.

We make a bow from the St. George ribbon with our own hands

In this version, we fold the tape with a loop, then we pull the upper free end to the overlap. Before attaching to clothes, the center of the bow can be fastened with threads so that the structure does not fall apart.

The next method is a little more complicated, such a bow will be made from three pieces of ribbon.

First you need to decide on the size of the bow and cut off two ribbons, the length of which will be twice as long. Also prepare a short piece of tape.

Step-by-step instruction:

1) On one of the long ribbons, cut out the corners on both sides. We process all the edges with a lighter.

2) We fold the second tape in half so that the junction of the ends falls in the middle of the folded blank from below. Attach with thread or glue.

3) We wrap the workpiece in the center with a short piece of tape and fasten it on the back side.

4) We fold the tape with corners with the letter “L” and attach it from the inside.

For this option, you will need two 45 cm ribbons and one small one.

Stages of work:

1) We fold a long ribbon, connecting the edges. We squeeze the sides of the circle so that we get the "eight". We fix the result with a pin.

3) We wrap a short piece of ribbon around the center of the bow, fasten it from the back.

4) From the remaining tape we form a loop, which we attach from the inside to the center at the crossing point.

Manufacturing steps:

1) We lay a part of the tape 40 cm long on the surface, hold the rest to the hand.

2) We form the second layer in the opposite direction, measuring somewhere around 20-25 cm.

3) We continue to fold the tape in a zigzag so that each new layer is 4-5 cm shorter than the previous one.

4) Finally, we leave the free part of the tape about 20 cm long.

5) We fix the middle with glue or simple stitches, place the ends of the tape with a corner and fix it.

6) Cut out the corners and process the edges with a lighter.

A simple and unusual option for making decorations from St. George and black ribbons, as well as an “antique” decor element.

Stages of work:

1) We fold the St. George ribbon with a “figure eight”, fixing the junction of the edges. Its length should be 30 cm.

2) We wrap the center with a short piece of tape and fasten it on the back side.

3) From black ribbons, we fold the bases of the bows, in which the ends are joined in the center from below, and connect them with a cross.

4) We assemble the product. We fasten a bow from the St. George ribbon over the black cross. From above we decorate with a decor element.

MK on the design of the St. George ribbon with a flower in the style of kanzashi

A festive accessory in the form of a St. George ribbon with a flower made using the kanzashi technique will look very interesting and original. A distinctive detail of this style is the use of small pointed petals. It will not be difficult at all to create such a product, the following master class will help with this.

You will need:

1) Satin St. George ribbon;

2) Orange and black ribbons;

4) Hot glue;

5) Scissors;

6) Tweezers;

7) Lighter.

Step-by-step instruction:

1) First of all, we cut the black and orange ribbons into squares 5 × 5 cm in size. You should get seven pieces of black parts and fourteen orange ones. We process all edges with a lighter.

2) Let's start making petals. We use tweezers, because. the details are very small. Take the orange square and fold it in half into a triangle. Then twice more twice. The result is a tiny petal. We cut off the edge for which the workpiece was held with tweezers, and process it with fire.

4) We fold the black square several times in the same way and apply it to the finished orange petal. The small petal should be inside the black blank, and it, in turn, inside the orange one.

5) There are sharp corners behind the tweezers that need to be cut off. We also process the edges.

6) In total, seven three-layer petals should be obtained, which are combined with each other using hot glue. The junction of the parts is decorated with decorative elements.

It remains only to form a loop from the ribbon and attach the finished flower. It turns out an original and beautiful holiday brooch, as in the photo below.