How viscous to tie a women's scarf. Schemes and descriptions of voluminous scarves with knitting needles. Relief pattern for a scarf on knitting needles

Patterns for knitting a scarf with knitting needles

Patterns for knitting scarves with knitting needles with your own hands. With all the variety of ready-made knitted things offered, there are still many fans of knitting with their own hands on knitting needles, for example. One of the simplest knitwear that even beginners can do is a scarf.

It would seem easier to buy a ready-made scarf in a store. However, you may not always be satisfied with the combination of price and quality of the finished knitted product. But you can choose good and inexpensive yarn for knitting in the store. As a result, you will have a scarf that will not roll up even after repeated washes. Moreover, it is not always possible to choose a ready-made scarf according to the color of the clothes. And knowing how to knit, in a few evenings you will knit a scarf of your favorite color, length, width and texture.

Depending on the purpose of the scarf, you can choose a pattern for knitting. Often scarves are knitted with an elastic band. This pattern allows the product to be elastic, fit the neck well. The narrower the scarf, the easier it is to wrap around the neck and fasten the clothes. It is faster and easier to knit a scarf on thick knitting needles (for example, knitting needles No. 5-8). On average, a regular scarf will require 200 grams of yarn (2 skeins).

Knitting a scarf with an elastic band 2x2

A scarf knitted with a 2x2 elastic band (knit 2, purl 2) looks good. The scarf knits quickly, the fabric is more elastic.

Knitting a scarf with an elastic band 1x1

The scarf can also be knitted with an elastic band 1x1 (1 front, 1 purl). The fabric will be denser, and knitting will take longer).

Scarf knitted with 1×1 ribbing. For knitting, lingonberry-colored merino yarn was used (50% merino wool, 50% acrylic), knitting needles 5mm. There were 40 stitches cast on the needles. Scarf width - 19 cm. Yarn consumption is about 150 gr.

Thick thread scarf

Scarf, also knitted with 1x1 ribbing, but only with thick threads. For knitting, milky-colored yarn (25% wool, 75% acrylic) was used, knitting needles 8mm. There were 30 stitches cast on the needles. Scarf width - 21 cm. Yarn consumption is about 200 gr.

The beginning and end of the scarf are tied with a 1x1 elastic band in a checkerboard pattern. That is, the first six rows are knitted in the order: 1 front loop, 1 purl loop, etc. Next 6 rows: purl 1, knit 1, etc. After 6 rows, change the order again.

Knitting a scarf with elastic braids 1x1

Knitting a scarf with a double-sided pattern - 1x1 elastic band with braids from 1x1 elastic band

Scheme for knitting braids with an elastic band 1x1:

Ι = facial loop;
- purl loop;

Pattern for knitting a scarf from braids with elongated loops, alternating with an elastic band 2x2. For a scarf, you can dial 45 loops plus 2 edge, knitting needles 3 mm.

This is what the pattern looks like from the other side.

Scarf knitting pattern

In the purl rows, knit the pattern according to the pattern.

I = front loop
- = purl

/ = remove the loop without knitting, the thread at work (from the wrong side, the removed loop is again transferred to the knitting needle, without knitting, the thread before knitting)

/ = moving from 3 loops, remove two loops and leave on the knitting needle at work, knit the elongated loop with the knit one, knit the loops from the additional knitting needle

\ \u003d moving from 3 loops, leave the elongated loop on the knitting needle before work, knit 2 facial loops, knit the elongated knit loop from an additional knitting needle

Pattern "elongated braids"

Rows of elongated braids for a scarf. On the knitting needles, cast on 40 loops plus 2 edge loops and knit according to the above pattern. From the wrong side, knit according to the pattern. The pattern on the scarf is embossed. Therefore, after knitting, the scarf can be slightly steamed from the wrong side.

This is what the drawing looks like from the back side.

Knitting pattern for the "elongated braids" pattern

Patterns for knitting a scarf with an elastic band with loops removed

pearl gum

The next pattern is easy to knit. It is also called pearl gum.

2nd row - we remove the wrong loop with a crochet, 1 front, etc.

3rd row - repeat the pattern from the 1st row.

This is what the rubber band looks like from the other side.

Scarf for a girl, knitted with pearl gum yarn for hand knitting "Baby wool" color "White rose" (40% wool, 40% acrylic, 20% bamboo). After washing, the scarf retained its shape and size.

On the one hand, the gum resembles pearls, and on the other hand, the patent gum. The scarf looks very nice.

pearl gum 2

1- row -1 facial, 1 purl, 1 facial, 1 purl, etc.;

2nd row - we remove the purl loop with a crochet, 1 front, etc .;

3rd row - 1 facial, 1 purl, 1 facial, 1 purl, etc.;

4th row - 1 facial, 1 purl, 1 facial, 1 purl, etc.;

5th row - 1 facial, 1 purl, 1 facial, 1 purl, etc .;

6th row - we remove the purl loop with a crochet, 1 front, etc .;

7th row - repeat from the 1st row.

On the other hand, the pattern looks like a 1x1 rubber band.

English scarf rib

Using the English gum scheme, you will get a voluminous and beautiful scarf. This scarf is suitable for women, men and children. Yarn will need more, using the specified gum. English gum is performed as follows:

1st row -1 front, yarn over, slip 1 loop, etc. ;

2nd row - we remove the purl loop with a crochet, and we knit the removed loop with a crochet front, etc .;

3rd row - as 1st row;

4th row - as 2nd row;

Double or hollow elastic band

Cast on an even number of stitches on the needles.

1st row - 1 edge loop (remove without knitting), 1 front, 1 loop to remove, thread before work, 1 front, 1 loop to remove, thread before work, etc. repeat, the last loop is purl-knitted.

2nd row - 1 edge, 1 front, remove 1 loop, thread before work, 1 front, remove 1 loop, thread before work, etc. repeat, the last loop is purl-knitted.

3rd row - same as 1st row

4th row - as 2nd row

Two-color double-sided patent ribbing for a scarf

Two-tone patent elastic on the front.

Two-tone patent elastic on the wrong side.

Description of knitting two-color double-sided patent pattern

Cast on an odd number of stitches. Knit a patent pattern according to the scheme, first 2 rows in a row from the front side. Then turn the knitting over and knit 2 rows in a row from the wrong side. Then turn the knitting over again and knit 2 rows in a row from the front side. Then, alternating similarly in two rows from the front and back sides, we repeat the patent pattern according to the scheme from the 3rd to the 6th row.

Knitting pattern for a two-color double-sided patent pattern

Ι = facial loop;

⁄ = slip 1 double crochet as purl;

● = knit a loop together with a front crochet;

Ο \u003d knit a loop with a crochet together from the wrong side;

A = green;

B = yellow

Geometric pattern for a scarf

A double-sided geometric pattern of front and back loops is suitable for knitting both a men's scarf and
and for women.

Knitting pattern for a double-sided geometric pattern

I = front loop

Purl loop

Knit odd and even rows according to the scheme. Even rows - according to the figure.

Shadow pattern of front and back loops for scarf decoration

To decorate the beginning and end of the scarf, you can draw a shadow pattern from the front and back loops, and knit the scarf itself with a garter stitch.

This is what the shadow pattern looks like from the other side

Knitting pattern for a shadow pattern from knit and purl loops

I = front loop
- = purl

Knit even rows according to the pattern.

Relief pattern for a scarf on knitting needles

A simple embossed pattern for a scarf is suitable for knitting with any thread on knitting needles. The pattern will look especially impressive on thick, fluffy threads, and the scarf itself will be correspondingly more voluminous.

Description of knitting relief pattern

Cast on an even number of stitches plus 2 edge stitches.

1st row: edge loop (remove), facial loops, edge loop (purl);

2nd row: edge loop (remove), purl loops, edge loop (purl);

3rd row: edge loop (remove), knit 2 loops together front, edge loop (purl);

4th row: edge loop (remove), * 1 front loop, knit 1 front loop * from the next transverse thread, repeat from * to *, edge loop (purl).

Below in the photo is the reverse side of the relief pattern.

Knitting a scarf with a checkerboard pattern

A scarf can be knitted in such a geometric and double-sided pattern as a checkerboard pattern. This is an alternation of squares made from front and back loops. A scarf knitted in this pattern will keep its shape well.

Description of knitting "chess"

1st row - 1 edge, 8 facial, 8 purl, 8 facial, 8 purl, etc. , we knit the last loop on the wrong side;

2nd row - knit according to the pattern;

3rd, 5th, 7th rows - knit as 1st row;

4th, 6th, 8th rows - knit as 2nd row;

9th row- 1 edge, 8 purl, 8 facial, 8 purl, 8 facial, etc. , we knit the last loop on the wrong side;

10th row - knit according to the pattern;

11th, 13th, 15th rows - knit as the 9th row;

12th, 14th, 16th rows - knit as the 10th row;

17th row - repeat from the 1st row

Knitting pattern for a checkerboard pattern

I=front loop

Purl loop

Knit even rows according to the pattern.

Checkerboard pattern from vertical rectangles for knitting a scarf

Another version of the previous checkerboard pattern. This is an alternation of rectangles.

1st row - 1 edge, 4 front, 4 purl, 4 front, 4 purl, etc. , we knit the last loop on the wrong side;

2nd row - knit according to the pattern;

3rd, 5th, 7th, 9th, 11th rows - knit as 1st row;

4th, 6th, 8th, 10th, 12th rows - knit according to the pattern;

13th row- 1 edge, 4 purl, 4 facial, purl, 4 facial, etc. , we knit the last loop on the wrong side;

14th row - knit according to the pattern;

15th, 17th, 19th, 21st, 23rd rows - knit as the 13th row;

16th, 18th, 20th, 22nd, 24th rows - according to the drawing;

25th row - repeat from the 1st row.

Knitting pattern for a checkerboard pattern with vertical rectangles

Checkerboard pattern from horizontal rectangles for knitting a scarf

Similarly to the previous patterns, you can knit a scarf according to such a pattern, when narrow and long rectangles of 8 front and 8 purl loops alternate.

Beautiful chess pattern of squares of different knitting

Squares of 10 loops alternate in a checkerboard pattern: a 1x1 elastic band and a pattern of front and back stripes. The pattern looks good in light gray yarn and is suitable for knitting men's scarves.

The pattern is double-sided and on the reverse side looks like this:

Knitting pattern of a double-sided checkerboard pattern from squares of different knitting

Legend:

Ι = front loop
- = purl

From the wrong side, knit the pattern according to the pattern.

Simple double-sided knit and purl pattern

Pattern from the other side

Knitting pattern for a simple double-sided pattern

I=front loop

Purl loop

Knit even rows according to the pattern.

Scarf pattern with elongated front loops

A simple scarf pattern for beginners to knit. A pattern with elongated facial loops will look especially impressive if it is knitted with thick and soft threads.

Pattern from the other side

Description of knitting pattern with elongated facial loops

Cast on a number of sts a multiple of 3 plus 4 sts.

1st row: edge, * 2 out. loops, remove 1 loop without knitting *, 2 out., edge;

2nd row: knit according to the pattern, purl the removed loops;

Scheme of a pattern with elongated facial loops

I= front loop

Purl loop

V = the loop is removed on the knitting needle not knitted, the thread remains in work

Knit even rows according to the pattern.

Double-sided stretch stitch pattern in garter st for a scarf in two colors of yarn

This is what the pattern looks like from the front.

And this is what a two-color double-sided pattern looks like from the wrong side.

Description knitting a two-color double-sided dense pattern for a scarf

0th row - edge, knit with facial loops with threads of the same color, edge;

1st row - edge, remove 1 loop, thread at work, knit 3, remove 1 loop, thread at work, etc., knit 3, edge;

2nd row - edge, knit with threads of a different color - 1 front, remove 1 loop, thread before work, 3 front loops, remove 1 loop, thread before work, 3 front loops, remove 1 loop, thread before work, etc. . alternate, edging

3rd row - we knit with a thread of the same color as in the 2nd row, 1 edge, 2 front loops, remove the removed loop again without knitting (pull it out), thread at work, 3 front, remove the removed loop, thread for work, etc. alternate, edging.

4th row - knit as 1st row.

5th row - edge, 3 front, remove 1 loop, thread at work, 3 front loops, remove 1 loop, thread at work, etc. alternate, edge.

6th row - knit as 2nd row.

7th row - knit as 3rd row.

8th and 9th rows - knit as 4th and 5th rows.

And so on, we change the thread every two rows. When removing loops, the thread should always be on the front side before work.

Knitting pattern of a double-sided two-color pattern

Ι front loop

∨ - removed loop

Dense scarf pattern

Dense pattern with elongated facial loops for knitting a winter scarf. With such a pattern, the shape of the scarf is well preserved. Soft, fluffy yarn is suitable for knitting such a dense pattern.

Description of knitting a dense pattern

On the knitting needles, dial the number of loops a multiple of 4 plus 5.

1st row: edge, * 3 out., 1 removed loop *, 3 out., edge;

2nd row: we knit according to the pattern, we do not knit the removed loops and again we remove them on the working knitting needle;

3rd row: edge, front loops, edge;

4th row: knit according to the pattern (purl loops);

5th row: edge, 1 out., * 1 removed loop, 3 out. *, 1 out., edge;

6th row: knit according to the pattern, except for the removed loops - we transfer them to the working knitting needle without knitting;

7th-8th rows knit as 3rd-4th rows;

Dense Pattern Diagram

Purl loop

I= front loop

V = remove the loop without knitting, thread at work

Knit even rows according to the pattern, remove loops - thread before work.

Pattern with spikelets for knitting a scarf

So the pattern "Spikelet" looks from the wrong side.

Description of knitting pattern "Spikelet"

1st row: edge, * 3 out., 3 loops moved to the right - first knit the third loop, bypassing the first two in front, then knit the first and second loop. All three loops are lowered from the left knitting needle, 3 loops are moved to the left - the first loop is removed on an additional knitting needle and left in front before work, then the second and third loops are knitted, and after them the first loop from the additional knitting needle *, 3 out., edge;

2nd row: knit according to the pattern;

3rd row: repeat from the 1st row.

Knitting pattern "Spikelet"

I front loop

Purl loop

Knit even rows according to the pattern.

Spikelet pattern on garter stitch

The pattern is made by alternating stripes of garter stitch and spikelets from 6 facial loops.

Scheme of knitting spikelets on a garter stitch

I= front loop

Purl loop

Knitting braids in a pattern for a scarf

The pattern for the scarf is made by alternating stripes of garter stitch and braids from 6 facial loops.

Reversible braid pattern for scarf

A simple double-sided braided scarf pattern. For knitting, cast on the number of loops in multiples of four plus two edge loops.

1st row - 1 edge, 4 facial, 4 purl, 4 facial, 4 purl, etc., 1 hem (purl)

2nd row - knit loops according to the pattern;

3rd and 4th rows - repeat according to the pattern;

5th row - 1 edge loop (remove the loop without knitting), we make a tourniquet - remove 2 front loops on a pin, knit 2 front loops, knit loops from the pin, purl 4, etc., the last loop is purl;

6th row - 1 edge (remove the loop), we knit the loops over the wrong ones with the wrong ones, and we knit bundles from the front loops (remove the front 2 on a pin, knit 2 front ones, knit 2 front ones from the pin);

7th, 8th, 9th, 10th rows knit according to the pattern;

11th-12th rows - we knit bundles from facial loops;

Pattern on one side:

This is what the pattern looks like from the other side:

Double-sided herringbone scarf pattern

View of the double-sided pattern from the other side

Knitting pattern for the Christmas tree pattern

Ι front loop
- purl loop

Knit even rows according to the pattern.

Patterns with two moved scarf loops

Light and beautiful patterns with shifted loops are suitable for both women's and men's scarves.

Double-sided elastic band with relocated loops 2x2

View of the gum from the other side:

Knitting pattern of double-sided elastic band with moved loops

Ι front loop
- purl loop

Reversible ribbing with relocated 2x4 stitches

View of the gum from the other side:

Pattern knitting pattern

Ι front loop
- purl loop

\ first knit the second loop in the back with the front loop, and then the first loop in front of the front

Beautiful double-sided pattern with moved loops

Pattern from the other side

Pattern knitting pattern

Ι front loop
- purl loop
/ bypassing the first loop, first knit the second loop with the front one, then knit the first loop

Reversible pearl scarf pattern

A simple and easy-to-perform pearl pattern (or as it is also called "rice") for women's and children's scarves looks especially beautiful when knitted with bulky threads. In our case, this is a mohair in several threads. The pattern looks voluminous and distinct, and the knitted fabric is fluffy and soft to the touch.

Scheme of a pearl pattern or "rice" pattern

Ι front loop
- purl loop

Knit even rows according to the pattern.

Openwork patterns for knitting scarves with knitting needles

Openwork knitting for a women's scarf

Openwork pattern

I = face loop

- purl loop

Ο yarn over

⁄

Simple openwork elastic band 2x2 for a scarf

Openwork turns out to be beautiful, although easy to perform. At the same time, the product looks voluminous and keeps its shape. Fluffy (including mohair), soft threads are well suited for knitting it.

Description of knitting openwork gum

Cast on a number of stitches in multiples of 6 plus 2 hem stitches.

1st row: 1 edge, 2 out., 1 yarn over, knit 2 loops together with removal - 1 loop is removed as in front knitting, 1 front loop, and with the left knitting needle the removed loop is put on the knitted one, we repeat the pattern;

2nd row: knit according to the pattern, knit yarn over with purl loops;

3rd row: 1 edge, 2 out., Knit 2 loops together with the front, 1 yarn over, repeat the pattern to the end of the row, edge;

4th row: knit according to the pattern.

Repeat the pattern from the 1st to the 4th row.

Openwork pattern for knitting a scarf

Ι front loop

- purl loop

Ο yarn over

\ 2 loops are knitted together with removal - 1 loop is removed as in front knitting, 1 front loop, and with the left knitting needle, the removed loop is put on the knitted

⁄ knit 2 stitches together

Openwork 3 for scarf

Easy-to-execute openwork paths in alternation with paths from purl loops.

Description of knitting openwork for a scarf:

On the knitting needles, dial the number of loops a multiple of 12 plus 2 loops (edge).

1st row: edge, 4 out., 1 yarn over, knit 2 loops together with removal (1 loop is removed as in front knitting, 1 front loop, and the removed loop is put on the knitted one with the left knitting needle), knit 2 loops together with the front one, 1 yarn over, repeat the pattern to the end of the row;

2nd row: knit according to the pattern;

Repeat the pattern from the 1st row.

Knitting pattern for an openwork pattern with symbols:

Ι front loop

- purl loop

Ο yarn over

\ 2 loops are knitted together with removal - 1 loop is removed as in front knitting, 1 front loop, and with the left knitting needle, the removed loop is put on the knitted

⁄ knit 2 stitches together

Openwork 4 for scarf

View of the openwork from the wrong side:

Description of knitting openwork 4

Cast on a multiple of 13 plus 2 stitches.

1st row: 1 edge, 4 out., 1 yarn over, 2 loops are knitted together with removal (1 loop is removed as in front knitting, 1 front loop, and the removed loop is put on the knitted one with the left knitting needle), 1 person., 2 loops knit knit together, 1 yarn over, repeat the pattern to the end of the row;

2nd row: knit according to the pattern;

3rd row: edge, 4 out., 1 person., 1 yarn over, knit 3 loops together with removal (1 loop is removed as in front knitting, knit 2 front loops together, and put the removed loop on the knitted one with the left knitting needle), 1 nakid, 1 persons., repeat the pattern to the end of the row;

4th row: knit according to the pattern;

5th and subsequent rows: repeat from the 1st to the 4th row.

Openwork knitting pattern

Ι front loop
- purl loop
Ο yarn over
\ 2 loops are knitted together with removal - 1 loop is removed as in front knitting, 1 front loop, and with the left knitting needle, the removed loop is put on the knitted
⁄ K 2 stitches together
∆ 3 loops are knitted together with removal - 1 loop is removed as in front knitting, knit 2 front loops together, and with the left knitting needle the removed loop is put on the knitted

Openwork pattern with crosses

The number of loops for the pattern is a multiple of 4 + 2 + 2 edge. Start the pattern with 1 edge, repeat the rapport according to the scheme, end with loops after rapport 1 edge. Repeat 1 time from the 1st to the 6th row, then repeat from the 3rd to the 6th row.

Knitting pattern with symbols

Openwork pattern for a mohair scarf

Dial on the spokes the number of loops, a multiple of 14 +1 +2 edge. In purl rows, purl stitches and yarn overs.

Mohair openwork pattern

Ι = facial loop;
∪ = double crochet;
∨ = knit 4 loops together;
> = 4 loops knit together with the front crossed.

Shawl pattern for knitting a scarf

You can do it easily and simply by knitting a scarf in garter stitch. That is, we knit all the rows on both sides with facial loops. Garter stitch looks good on soft and fluffy threads.

In the photo below, a scarf knitted with a shawl pattern, alternating with rows knitted with front stitch. The end of the scarf is decorated with a pattern of front and back loops. The pattern is shown above. The main fabric of the scarf is knitted with alternating patterns as follows:

42 rows - shawl pattern (even and odd rows - facial loops);

2 rows - shawl pattern (odd row - front loops, even row - also front loops);

4 rows - front surface (odd rows - front loops, even rows - according to the pattern - purl loops);

we repeat the alternation from the very beginning.

Simple pattern with alternating rows of garter stitch and 1x1 ribbing

A simple pattern for knitting a scarf. The pattern looks especially interesting when executed on thick fluffy and soft threads.

Pattern from the other side:

Description of knitting pattern

On the knitting needles, dial the number of loops a multiple of 15 plus 2 (edge loops).

1st row: remove the first (edge) loop without knitting, 1 person., 1 out., 1 person., 1 out., 1 person., 5 person., 1 person., 1 out., 1 person., 1 out. ., 1 person., 5 persons., and repeat the pattern (that is, we alternate 5 loops of elastic band 1x1 and 5 loops of garter stitch), knit the last (edge) loop on the wrong side;

2nd row: edge loop, 1 out., 1 person., 1 out., 1 person., 1 out., 5 persons., 1 out., 1 person., 1 out., 1 person., 1 out., 5 persons., and repeat the pattern, edge loop;

3rd row knit as 1st row;

4th row knit as 2nd row;

Scheme of a pattern of garter rows and rows of elastic 1x1

I= facial loop;

Purl loop

Pattern with alternating rows of garter stitch and rows of facial loops

On the other hand, the pattern looks like alternating rows of garter stitch and rows of purl stitches:

Description of knitting pattern

On the knitting needles, dial the number of loops a multiple of 9 plus 2 (edge loops).

1st row: edge loop, knit all loops of the row, knit the last (edge) loop purl;

2nd row: edge loop, 3 persons., 3 out., 3 persons., 3 out., and repeat from the beginning, edge loop;

3rd row knit as 1st row;

4th row knit as 2nd row;

Scheme of the pattern of alternating garter stitch and facial rows

I= front loop

Purl loop

A scarf today is worn more as a stylish accessory, and only then as a way to protect your body from cold and wind. For several years, almost all designers in their collections have presented simple hand-knitted scarves made with knitting needles. Many women find knitting boring and monotonous. But actually it is not. If you show patience and devote some time to the selection of interesting models and patterns of scarves, then needlework will turn into an exciting activity that brings maximum pleasure. And you, dear needlewomen, are generally lucky! We have already selected for you the most original, beautiful, and most importantly, affordable models with diagrams and descriptions. You just have to choose the one that you like, and you can plunge headlong into the creative process.

We knit a classic male version of a scarf with knitting needles with patterns

For beginner craftswomen who have just learned how to make the first loops, we suggest knitting a men's scarf according to the next master class. By doing this work, you will not only consolidate your knitting skills, but also add a useful and warm little thing to your wardrobe.

Here is such a scarf, made with the simplest pattern, you can knit in just an evening or two. This option is more suitable for males, but if you want to knit it for yourself, then just pick a different color of yarn.

For work, you will need wool or wool blend yarn - 100 g, knitting needles No. 4.

Detailed description of the process for beginners

Type 50 loops on the needles and knit an auxiliary row, alternating loops as follows: *1 knit., 1 out. * Repeat to the end of the row.

From the next row, start knitting the main pattern "English gum":

1 row. Krom., * persons., out., * repeat from * to *, chrome.

2 row. Krom., * faces., nakid, wrong side, remove untied *, repeat from * to *, chrome.

Repeat the pattern from the 1st to the 2nd rows.

If you want the scarf to be striped, then alternate the stripes in the following sequence:

Your first DIY scarf is ready! With which we congratulate you. But let's not stop there and continue to develop our skills, practicing knitting other options for this accessory for all family members.

Another male option for every day with a description

The size of the presented men's scarf is 18 X 135 cm.

For work, you will need cashmere yarn - 150 g, knitting needles No. 4.

Knitting density: 10 X 10 cm = 24 loops X 32 rows.

patterns.

"Rice". 1 row. Alternating loops: 1 persons .. 1 out.

2 row. Alternation of loops: 1 out., 1 person.

Repeat pattern from 1st to 2nd rows.

Fantasy pattern.

1st, 3rd and 5th row: 2 persons., * 1 out., 1 persons. * - (2 times), 1 out. ,2 persons. * 1 out., 1 person. * - (2 times), 1 out., 2 persons. etc.

2, 4 and 6 row: 3 out., * 1 out., 1 person. * - (2 times), 3 out., * 1 out., 1 person. * - (2 times), etc., finish row 3 out.

7 row: 2 persons, 12 out., 2 persons., 12 out., 2 persons. etc.

8 row: knit according to the pattern.

9 row: all loops are facial.

10, 12 and 14 row: 2 out., * 1 out., 1 person. * - (2 times), 1 person., 2 out., * 1 out., 1 person. * - (2 times), 2 persons. etc.

11, 13 and 15 row: 2 persons., * 1 out., 1 persons. * - (2 times), 3 persons. , * 1 out., 1 person. * - (2 times), 3 persons. etc.

16 row: 7 persons., 2 out., 5 persons., 7 persons., 2 out., 5 persons. etc.

17 row: knit according to the pattern.

18th row: Purl all stitches.

Detailed description of the workflow

Cast on 44 sts and knit 7 rows in Rice pattern. Next, knit the first and last 7 loops with the “Rice” pattern, and the central 30 loops with the “Fantasy Pattern”, which should be repeated from 1 to 18 rows - 19 times. Then knit 7 more rows with the “Rice” pattern and close the loops.

We create an original model especially for women

In the next photo you see a women's scarf made with knitting needles. At first glance, it may seem that linking this option will not be easy. But this is an erroneous opinion. This pattern is very easy to knit. Study the following master class, and you will see for yourself.

In order to make such a model with a size of 20x120 cm, we need mohair yarn - 200 g, knitting needles No. 4.5, an auxiliary knitting needle.

Description of a step-by-step master class for beginners

Type 128 loops on the knitting needles (pattern repeat = 24 loops + 4 loops on the left and right). Knit as follows: chrome, 3 persons, then according to the scheme with an elastic band 2x2, always finish 4 persons. loops. The wrong side also start with 3 persons, then knit according to the pattern, always finish with 4 facial loops.

From the 9th row, start weaving to the left on the first 24 loops of the 2x2 elastic band, after 24 loops of the pattern, weave again. And so, alternating, in this row you get 3 weaves and two passes. To move 24 loops to the left, do as follows: remove the first 12 loops on the auxiliary knitting needle, leaving them before work. Now work 12 stitches in rib 2x2 and then work stitches from extra needle (k2, p2).

In the 19th row, weave to the right on the missing sections in the 9th row.

19th row. Chrome, knit 3, *24 sts in 2x2 rib, remove 12 sts on the auxiliary needle and leave them at work, knit with a 2x2 rib for the next 12 loops, then knit the loops from the auxiliary knitting needle, repeat from * again, 24 loops with a 2x2 elastic band , 4 persons.

After 10 rows, made with a 2x2 elastic band, repeat the weaves in the same way as in the 9th row, and after another 10 rows in the same way as in the 19th.

When the scarf reaches your desired length, work 7 rows in 2x2 rib. Close all loops.

Knitting pattern:

Such a pattern of braids is unusually beautiful, and in addition, it gives the product additional volume.

Openwork technique (in white) for more experienced needlewomen

A light airy openwork scarf made with an intricate pattern is unlikely to warm you well in severe cold. But that is not his calling at all. Thrown casually over the shoulders, it complements and decorates the outfit of any style: it makes it elegant and spectacular, more elegant and chic.

The size of the presented model of a white openwork scarf is 30 X 150 cm.

Materials: mohair yarn 250 g, knitting needles 7 mm, hook No. 4.5.

Knitting density. 13 p. Wavy pattern = 10 cm in width.

patterns.

Wavy Pattern: Knitted according to the scheme, which shows only the faces. ranks. Purl rows to perform according to the pattern.

Attention! Knit along the long side of the scarf in the back and forth direction. Cast on 195 sts and work 2 rows in garter st. Then continue knitting, according to the scheme M.1, knitting 4 sts from each edge of the product with a garter stitch. After 28 cm, knit 1 full repeat of the pattern in height, knit 2 p. garter stitch. Then freely close the loops (when closing the loops, knit the first row of the M.1 scheme so that the edge of the product is wavy).

Crochet tying: tie around all edges of the scarf as follows: 1 tbsp. b/n. in the 1st p., * 4 c. p., 1 tbsp. s / n. in the first of the 4th c. p. (= 1 picot), skip 3 cm, 1 tbsp. b/n. in a trace. *, repeat from * to * and finish tying with 1 picot and 1 half-column b / n. in the 1st p. from the beginning of the strapping.

Scheme:

Making a popular scarf-hood for style icons

The scarf-hood is still at the peak of popularity. This practical and stylish model should appear in your wardrobe.

Materials: wool yarn - 200 g, knitting needles No. 4.

patterns.

Garter Stitch: All rows are knitted.

Harness pattern: knit according to patterns.

Knitting density: 24 loops X 26 rows with a pattern according to scheme No. 1 = 10x10 cm.

Festive and very beautiful look Norwegian knitting patterns, which you will find by clicking.

Step-by-step description of the knitting progress

Cast on 44 sts on needles and knit 2 rows of boards. viscous. Next, knit with a pattern according to scheme No. 1, which shows only faces. rows, in out. rows, knit all loops according to the pattern. Repeat 1 time from the 1st to the 53rd row, and then repeat the 55th-61st rows. At a height of 105 cm from the beginning of work, knit from the 53rd to the 1st row. Next, knit 2 rows of boards. viscous and close loops. Set aside 21 cm from the center of the scarf on both sides.

Pick up loops along the edge of the resulting segment and knit with a pattern according to scheme No. 2. At a height of 21 cm, divide the knitting in half and then carry out each part separately. To form the bevel of the right side of the hood, decrease on the left side in each 2nd row 5 times 1 p. Close the remaining loops. Knit the left side of the hood symmetrically.

Assembly: sew the hood according to the pattern at points A, B, C, D, E. Run brushes: cut threads 20 cm long, stretch along the edges of the product at a distance of 1 cm from each other.

Scheme:

Parsing the creation of a stylish snood in circular rows

Snood (collar) is a scarf made with a solid cloth in circular rows. Such an accessory is worn around the neck in several turns. Snood looks original, beautiful and elegant. You will agree with this if you look at the following photo, which shows the model, as well as a video with a detailed explanation of the technique.

The size of the presented model of a knitted scarf-snood is 95 X 35 cm.

Materials: wool mixture yarn (thick thread) - 600 meters, circular knitting needles No. 6 (60-90 cm long), needle.

Knitting density. 14 stitches x 23 rows = 10 x 10 cm of pattern.

Detailed description of the process

It is necessary to dial 128 loops on the knitting needles (or 256 if knitting is circular) and knit the fabric according to the pattern. The peculiarity of this pattern is that it looks the same on the front and on the wrong side, which is what is needed for a product that will be twisted.
1 row. * 1 person., 1 out., 3 persons., 2 out. * repeat until 2 loops remain on the knitting needle; finish 1 person., 1 out.
2 row. * 1 person., 1 out., 1 person., yarn over, 1 person., remove 1 loop without knitting, 2 out., stretch 2 out. repeat through slipped st* until 2 sts remain on needle; finish 1 person., 1 out.
3 row. * 1 person., 1 out., 2 persons., 3 out. * repeat until 2 loops remain on the knitting needle; finish 1 person., 1 out.
4 row. * 1 person., 1 out., remove 1 loop without knitting, 2 persons., stretch 2 persons. through the slipped loop, purl 1, yarn over, purl 1 * repeat until 2 loops remain on the needle; finish 1 person., 1 out.
Repeat these 4 rows until the scarf measures 35 cm.
Close loops. If knitting was done using the back-and-forth method, and not in a circle, then you need to sew the product together.

Trumpet according to the old principles of knitting for beginners

The principle of knitting a scarf-pipe with knitting needles is the same as a scarf-collar. The only difference is that the tube scarf is knitted longer. This version of the product involves its use as a headdress.

In the photo below you see a cute bright scarf-pipe, made with knitting needles with a simple pattern "Patent gum". Even a beginner knitter will quickly master such a model.

For work, you will need wool / polyamide yarn - 200 g, circular knitting needles No. 5.
In order for the dimensions of the product to match yours, before starting work, knit a sample, determine the knitting density and make your calculation of the loops (see figure).

Pattern "Patent gum" (in a circle):

1 row: 1 persons., 1 out.;

2nd row: * 1 person., Knitted from the underlying row (prick the knitting needle into the corresponding loop of the underlying row and pull out a new person. P.), 1 out. *;

3rd row: * 1 person., 1 out., knitted from the underlying row (prick the needle into the corresponding loop of the underlying row and pull out a new out. p.) *.

Repeat 2nd and 3rd row.

Description of fast and high-quality progress of work

First you need to dial the required number of loops on the knitting needles and knit the fabric up 45 cm in a circle with the “Patent elastic band” pattern. Continue working with a 2x2 elastic band. After 3 cm, knit 1 row with an auxiliary thread and discard open loops from the knitting needle. Pick up loops along the place where the patterns change on the front side and knit another layer of elastic 2x2 up 3 cm, perform the last row with an auxiliary thread. Dissolve the auxiliary thread from each elastic in succession and connect the open loops with a stitch seam (see figure). Pull the cord through the tunnel between the rubber bands.

Knitting fun for little kids

Knitting for kids is a real pleasure. Firstly, the size of the product for a child is smaller than for an adult, so it takes a little time to work. Secondly, the bright colors of children's yarn charge with positive and joy. And thirdly, knitting for the dearest person in the world cannot be unpleasant and troublesome. So, dear needlewomen, if you have a free evening and suitable threads, let's get to work.

The following model of a children's scarf is good because it will suit any style of clothing: a coat, a sports jacket, and just as a decorative element for a sweater or turtleneck.

Here is such a "cheerful" scarf we bring to your attention. It will suit both a boy and a girl, the color of the thread, of course, you can choose to your liking. The peculiarity of this option is in the hole at one end, where the other edge of the product will be pushed through and fixed. This is convenient in that you do not need to knit a scarf into a knot that children do not like so much.

To knit such a model, you will need acrylic or wool mixture threads - 50 g, knitting needles No. 3, hook No. 3.

Description of knitting with an analysis of the main patterns

Cast on 30 sts on needles and work the entire piece in rib 1 x 1. When piece measures 60 cm, divide sts in half and work 15 sts of one half over 7 cm and leave these sts. Now knit the 15 loops left earlier also for 7 cm. When both halves are the same length, again knit them together in one piece. Thus, a hole was formed. Knit another 6 cm and finish knitting. Tie the edges of the children's scarf with any crochet lace. If desired, you can decorate the scarf with tassels or pompoms.

In this version of the work, it is not fundamentally important to knit the fabric with an elastic band 1 X 1. You can choose any other type of elastic band or a completely different pattern as a pattern. As examples, you can see a selection of patterns in the next section of the article.

If you want to knit a very exclusive designer scarf, then this is not at all difficult to do. Just decide on the size of the scarf, model, type of yarn and select the pattern. The following selection of original patterns will help you do the latter.

"Polish gum".

Educational video lesson for everyone

And now, for a better assimilation of the technique, we suggest you watch a video lesson.

Models of knitted products, as well as descriptions and diagrams for them, cannot leave indifferent any real knitting lover. Each of you, for sure, has looked after one, or maybe several options for scarves for yourself or for your relatives. We hope that you liked our video tutorial and found it useful.

We wish you a pleasant pastime for your favorite pastime. Let everything you plan turn out quickly and easily!

If you are interested in how to knit a scarf with knitting needles quickly and easily, then you got to our article in time. The size of your “knitting career” is not important to us, because we have selected elementary patterns that even a beginner needlewoman can handle. And how nice it is that in winter you or your family will be warmed by a scarf carefully knitted with your own hands!

Easy ways to knit a stylish scarf

Educational program on fashionable scarves

We know that our readers are the most beautiful and fashionable. Therefore, even before starting to knit a scarf, they will think about what models are now at the peak of popularity. We read your thoughts and tell you which scarf will be not only warm and cozy, but also fashionable.

The title of the most stylish scarves of the autumn-winter 2019-2019 season was awarded to models of white, yellow, orange, blue, green and burgundy colors. They are also not far behind mustard, purple and aquamarine. As you can see, the fashionable color palette will not let us get bored in the cold season.

Scarves - trendy colors and patterns

A few seasons ago, long and wide scarves were firmly entrenched among the current trends. Today they are still popular, so stock up on threads, dear needlewomen!

Long and wide beautiful scarf

There is no doubt about the popularity of knitted scarves. Such models are in the wardrobe of both famous stars and ordinary fashionistas. The most stylish knitted patterns are recognized as braids, plaits, openwork, simple hosiery or garter knitting.

Beautiful scarf with braid pattern

The novelties of recent seasons are snood and collar models. Casual style fans wear these models with down jackets, leather jackets, jeans and boots or sneakers on their feet. Looks very cool!

Warm snood

Can't wait to see the scarf ideas we have prepared for you? Then read on and try again!

Simple but so cute 2-needle scarf

If you have a coat with an open neck, then it must certainly be protected from wind and cold. A small light scarf is perfect for this.

Small knitted winter scarf

For its knitting, Lanoso Kulvar threads in shade 5508, with a composition of 25% wool and 75% acrylic, 80 m per 100 g, are best suited. Scarf dimensions: 108 cm x 19 cm.

Rice coarse knitting - scheme

The action plan is the following. Cast on 22 stitches and knit 4 rows with knit stitches, and purl the last edge stitch. Next, the drawing of the cobweb begins.

Scheme - garter stitch

Remove the first loop, knit 2 facial and knit with a pattern (alternate purl 2 with 2 facial), then again 2 facial and edge purl at the end. Then, in place of the facial ones, knit the wrong ones and vice versa. There are no changes in edge and adjacent loops. Knit 2 rows and again confuse the loops. Knit the end of the scarf with 4 rows of garter stitch and cast off.

Snood hood

If you do not like hats, this transformer will replace the scarf and hat. A stylish and practical solution for girls who do not want to freeze this winter. You can knit it quickly and easily in one evening.

Snood hood - a fashionable headdress

Prepare yarn, where 80% acrylic and 20% wool, 140 g per 80 m. You will need 2 skeins. Also, you can not do without knitting needles No. 9 and needles.

Cast on 54 stitches and simply knit all rows. The length of the product should be 48.5 cm.

Facial loops

There is very little left before the completion of the work. Fold the fabric in half, sew along the short length and about 20 cm along the long side. Ready!

Ribbed Snood

Even a beginner knitter can knit this scarf with knitting needles even without a pattern.

Fashionable ribbed snood

To get started, find knitting needles No. 8 and 200 g of anthracite yarn. The knitting density will be 13.5 loops for 21 rows - this is 10 by 10 cm.

So, dial 37 loops and knit a rib pattern for 84 cm.

Note! The execution of the pattern also includes edge loops.

Ribbed pattern

The hem is made as follows: you need to alternately knit 5 loops of garter stitch and 2 loops of front stitch. Garter stitch, respectively, is knitting with facial loops of all rows. And the front surface, in turn, implies that there will be front loops in the front rows and purl loops in the back rows. After the fabric is tied, sew the edges with a mattress stitch.

Snood with braids

Knitting such a scarf as in the photo is much easier than it might seem at first glance. Spectacular knitting with braids will be within your power. You will see, after a few rows you will not even look at the diagram all the time.

Snood with braids

The size of this beauty is 150 by 29 cm.

To knit a snood, prepare knitting needles No. 12 and 2 skeins of yarn of your favorite color. The best composition for thread is 98% alpaca wool combined with 2% nylon, 100 g per 130 m.

First you need to understand the technique of making patterns. There are 2 of them in this snood.

The pearl pattern involves knitting the hem front, then 1 front, 1 purl and completing the hem. In the next rows, tie the hem knit, knit the front purl and vice versa. At the end of the rows, do not forget about the edge loops.

Pearl pattern - scheme

The relief strip is performed according to the scheme:

Relief strip execution scheme

So, the most interesting begins - directly knitting a snood. Cast on 38 sts and from purl row knit hem knit, then 4 sts of the familiar pearl pattern, 12 sts of the embossed strip according to the pattern, again 4 pearl sts and knit hem to finish. Follow this sequence for 150 cm of knitting. It remains only to close all the loops in the front row and sew the scarf into a single ring.

Men's scarf

For girls who love to please their men, we want to tell you how to knit a men's scarf with knitting needles quickly and easily for beginners. Your spouse will definitely be delighted with such a gift. This scarf will warm him doubly, because it is associated with care and love.

Stylish men's scarf

The product is knitted with English knitting. This pattern is easy to perform and perfect for a beginner needlewoman.

Knitting pattern - English gum

Note! It takes almost 2 times more threads to knit the English type than to use regular elastic. But this ensures that the canvas will keep its shape and warm in winter.

To create this model, prepare knitting needles No. 4 and mixed threads with merino wool. Start knitting according to the following pattern. Cast on the desired number of loops, based on the desired width of the scarf. Then in the first row, alternate one front loop and one slipped with a crochet. In the second row, knit the removed loop together with the front one, and remove the next loop with a crochet. Starting from the second row, the entire pattern is repeated throughout the work, and this is 190 cm.

We hope we managed to convince you that you can knit a scarf with knitting needles quickly and simply using photo diagrams and video tutorials. Any fashionista knows that there are never too many scarves in the wardrobe. They add variety to the usual bows with outerwear and allow you to experiment with the image as often as you like.

Scarves, as you know, do not happen much! Awesomely beautiful scarves for women on knitting needles, with diagrams and descriptions, will undoubtedly appeal to all ladies. We tried to choose scarves for women with knitting needles of varying degrees of complexity, so that each of you would choose your own option. In our selection, there are different scarves: from knitted in a simple knit, for example, a tube scarf for beginners, to an openwork triangular scarf. Triangular scarves are very relevant now, and they are usually worn "back to front". Such an indispensable accessory as a knitted scarf for women will warm you and protect you from cold and wind.

A very interesting model with a diagram and description for women is a scarf with pockets, knitted on wool knitting needles with a simple garter stitch. The scarf has a long fringe and pockets. Pockets are decorated with three braids. The patterns on the pockets are quite voluminous. Scarf size 28/210 cm (without fringe). This model for women is suitable for both experienced needlewomen and beginners.

For work you will need:

3 skeins of 100 grams or 6 skeins of 50 grams (80% wool, 20% acrylic).
Needles number 4.
1 extra needle or large pin (for knitting a pocket pattern).
Big needle.

We will knit the scarf itself with a simple garter stitch, that is, with the same front rows. The pocket is worked separately, in a braided pattern (pocket diagram), and then neatly sewn onto the scarf.
Sample: 10 cm in garter st = 18 sts/34 rows. 10 cm of braid pattern = 22 stitches/28 rows.

How to knit a scarf? This scarf is worked in regular garter stitch. Cast on 50 sts and knit 210 cm in garter st, knit. Choose the length of the scarf individually, this length is approximate.

We collect 34 loops and knit according to the "pocket diagram" scheme. We knit up to 48 rows and close the loops. Similarly we knit the second pocket.

Assembly

Sew the pockets to the scarf with a large needle. It should be about 11-12 cm from the bottom edge of the scarf. We make a fringe for each edge of the scarf. To do this, cut 4 threads 42 cm long. Cut into separate pieces. We pierce a hole at the end of the scarf with a needle or knitting needle, fold the piece of thread in half, pull it into the loop and tighten the knot. This is how we make the fringe.

For those who have picked up knitting needles for the first time and do not know how to knit a scarf, we can offer the easiest option for beginners - a tube scarf. This scarf for women is knitted in a simple garter stitch, which means you only need to be able to start knitting and know how to knit a front loop. We will knit with one knit. In its appearance, a scarf-pipe is a scarf closed in a ring. Such a scarf can be made wide, and then it is wrapped around the neck 2 times, but for beginners it is better to start with the simplest and not wide option:

As you can see, the scarf for beginners is knitted on thick circular needles 4-5 mm. The yarn should be thick, then the scarf will look better. If you find it difficult to knit on circular needles, knit on ordinary ones, then just sew with a thick needle. The scarf is a rectangle, even more of a square.

Knit a small 10/10 cm swatch and you will know how many stitches you need to cast on for your piece. For example, if there are 12 loops in the 10/10 sample, then for a length of 60 cm we collect 72 loops.

We cast on 72 loops on circular needles and knit with facial loops, the next row is purl (since we are doing work on circular knitting needles). When the first row is ready, the work is not turned over, but connected, and the 2nd row is knitted further along the right side. The third row is facial, the 4th is purl, and so on. We knit a scarf with knitting needles, without stopping, until the desired height of the scarf. The height of our product for beginners will be 30-40 cm, no more. When working, you can figure out which height you like best.

Tied up to the desired height, and closed the loops of the last row. This is how the same scarf looks like, only knitted not on circular, but on simple knitting needles, which is then sewn together. How to knit such a scarf? Let's try to figure it out.

Here the length of the scarf is longer than the previous one. Also large knitting, thick knitting needles 8-9 mm, 200 gr. thick wool. We collect about 40 loops on simple knitting needles and knit with the same garter stitch, that is, with some facial ones, only knitting after the end of each row we turn over. We knit the last loop of the row from the wrong side - we turn - we do not knit the first loop, but simply remove it on a working knitting needle and knit further. We close the last row and sew the side.

An openwork scarf with knitting needles from lilac yarn, knitted with braids, the diagram is attached. In our scheme, the rapport (repeating moment) that is highlighted is 17 loops. This rapport is repeated in knitting 3 times. Yarn consumption - 400-500 grams (70% wool + acrylic). Knitting needles 4 mm thick.

Legend:

Point - edge loops.
Triangle - two loops together.
Circle - yarn over.
Empty cells are facial loops.
Cells with a dash - purl loops.
The longest lines - change 3 loops from right to left.
The dashes are shorter - we change 2 loops from left to right.

1st row: 2 edge, 9 persons., 2 purl, 2 loops together, yarn over, 2 facial, 2 purl. And then the rapport is repeated 2 more times for 17 loops, at the end - 2 edge loops.

2nd row: 2 out. edge, 9 purl, 2 facial, 2 out., 2 loops together, yarn over, 2 faces. And then repeat.

We knit to the desired length and close the loops. We make a fringe, as in the first version of the scarf.

Beautiful openwork scarf with knitting needles, you can knit with your own hands. Such a scarf for women, if knitted from wool with acrylic, is quite suitable for cold weather. We will get a triangle with a width of 175 cm and a height of 52 cm. We will knit on knitting needles with an openwork pattern, according to the scheme, with a description of the work.

For work you will need:

Yarn - 300 grams (50% wool, 50% acrylic).
Circular knitting needles 4 mm.
Markers or pins

Sample: 3 motifs, that is, 36 loops of an openwork pattern \u003d 18 cm. 10 centimeters of an openwork pattern \u003d 22 rows.

We collect 6 loops and knit with an openwork pattern according to the scheme. We knit 20 rows of the angle scheme (we get 62 loops). For the next 4 rows, knit in this way: scheme 1, 4 times just a scheme, then scheme 2. We get a total of 74 loops. We continue to add on each side (diagram 1 and scheme 2), repeating 12 loops of the central scheme as follows:

for the next 4 rows - 5 times (you get 86 loops).
for the next 4 rows - 6 times (you get 98 loops).
for the next 4 rows - 7 times (110 loops will turn out).

On the video is a master class for beginners on knitting a scarf.

We knit a classic male version of a scarf with knitting needles with patterns

For work, you will need wool or wool blend yarn - 100 g, knitting needles No. 4.

Detailed description of the process for beginners

Type 50 loops on the needles and knit an auxiliary row, alternating loops as follows: *1 knit., 1 out. * Repeat to the end of the row.

From the next row, start knitting the main pattern "English gum":

1 row. Krom., * persons., out., * repeat from * to *, chrome.

2 row. Krom., * faces., nakid, wrong side, remove untied *, repeat from * to *, chrome.

Repeat the pattern from the 1st to the 2nd rows.

If you want the scarf to be striped, then alternate the stripes in the following sequence:

Another male option for every day with a description

The size of the presented men's scarf is 18 X 135 cm.

For work, you will need cashmere yarn - 150 g, knitting needles No. 4.

Knitting density: 10 X 10 cm = 24 loops X 32 rows.

patterns.

"Rice". 1 row. Alternating loops: 1 persons .. 1 out.

2 row. Alternation of loops: 1 out., 1 person.

Repeat pattern from 1st to 2nd rows.

Fantasy pattern.

1st, 3rd and 5th row: 2 persons., * 1 out., 1 persons. * - (2 times), 1 out. ,2 persons. * 1 out., 1 person. * - (2 times), 1 out., 2 persons. etc.

2, 4 and 6 row: 3 out., * 1 out., 1 person. * - (2 times), 3 out., * 1 out., 1 person. * - (2 times), etc., finish row 3 out.

7 row: 2 persons, 12 out., 2 persons., 12 out., 2 persons. etc.

8 row: knit according to the pattern.

9 row: all loops are facial.

10, 12 and 14 row: 2 out., * 1 out., 1 person. * - (2 times), 1 person., 2 out., * 1 out., 1 person. * - (2 times), 2 persons. etc.

11, 13 and 15 row: 2 persons., * 1 out., 1 persons. * - (2 times), 3 persons. , * 1 out., 1 person. * - (2 times), 3 persons. etc.

16 row: 7 persons., 2 out., 5 persons., 7 persons., 2 out., 5 persons. etc.

17 row: knit according to the pattern.

18th row: Purl all stitches.

Detailed description of the workflow

We create an original model especially for women

In order to make such a model with a size of 20x120 cm, we need mohair yarn - 200 g, knitting needles No. 4.5, an auxiliary knitting needle.

Description of a step-by-step master class for beginners

In the 19th row, weave to the right on the missing sections in the 9th row.

After 10 rows, made with a 2x2 elastic band, repeat the weaves in the same way as in the 9th row, and after another 10 rows in the same way as in the 19th.

When the scarf reaches your desired length, work 7 rows in 2x2 rib. Close all loops.

Knitting pattern:

Such a pattern of braids is unusually beautiful, and in addition, it gives the product additional volume.

Openwork technique (in white) for more experienced needlewomen

The size of the presented model of a white openwork scarf is 30 X 150 cm.

Materials: mohair yarn 250 g, knitting needles 7 mm, hook No. 4.5.

Knitting density. 13 p. Wavy pattern = 10 cm in width.

patterns.

Wavy Pattern: Knitted according to the scheme, which shows only the faces. ranks. Purl rows to perform according to the pattern.

Scheme:

Making a popular scarf-hood for style icons

The scarf-hood is still at the peak of popularity. This practical and stylish model should appear in your wardrobe.

Materials: wool yarn - 200 g, knitting needles No. 4.

patterns.

Garter Stitch: All rows are knitted.

Harness pattern: knit according to patterns.

Knitting density: 24 loops X 26 rows with a pattern according to scheme No. 1 = 10x10 cm.

Festive and very beautiful look Norwegian knitting patterns, which you will find by clicking.

Step-by-step description of the knitting progress

Assembly: sew the hood according to the pattern at points A, B, C, D, E. Run brushes: cut threads 20 cm long, stretch along the edges of the product at a distance of 1 cm from each other.

Scheme:

Parsing the creation of a stylish snood in circular rows

The size of the presented model of a knitted scarf-snood is 95 X 35 cm.

Materials: wool mixture yarn (thick thread) - 600 meters, circular knitting needles No. 6 (60-90 cm long), needle.

Knitting density. 14 stitches x 23 rows = 10 x 10 cm of pattern.

Detailed description of the process

It is necessary to dial 128 loops on the knitting needles (or 256 if knitting is circular) and knit the fabric according to the pattern. The peculiarity of this pattern is that it looks the same on the front and on the wrong side, which is what is needed for a product that will be twisted.
1 row. * 1 person., 1 out., 3 persons., 2 out. * repeat until 2 loops remain on the knitting needle; finish 1 person., 1 out.
2 row. * 1 person., 1 out., 1 person., yarn over, 1 person., remove 1 loop without knitting, 2 out., stretch 2 out. repeat through slipped st* until 2 sts remain on needle; finish 1 person., 1 out.
3 row. * 1 person., 1 out., 2 persons., 3 out. * repeat until 2 loops remain on the knitting needle; finish 1 person., 1 out.
4 row. * 1 person., 1 out., remove 1 loop without knitting, 2 persons., stretch 2 persons. through the slipped loop, purl 1, yarn over, purl 1 * repeat until 2 loops remain on the needle; finish 1 person., 1 out.
Repeat these 4 rows until the scarf measures 35 cm.
Close loops. If knitting was done using the back-and-forth method, and not in a circle, then you need to sew the product together.

Trumpet according to the old principles of knitting for beginners

In the photo below you see a cute bright scarf-pipe, made with knitting needles with a simple pattern "Patent gum". Even a beginner knitter will quickly master such a model.

Pattern "Patent gum" (in a circle):

1 row: 1 persons., 1 out.;

2nd row: * 1 person., Knitted from the underlying row (prick the knitting needle into the corresponding loop of the underlying row and pull out a new person. P.), 1 out. *;

3rd row: * 1 person., 1 out., knitted from the underlying row (prick the needle into the corresponding loop of the underlying row and pull out a new out. p.) *.

Repeat 2nd and 3rd row.

Description of fast and high-quality progress of work

Knitting fun for little kids

The following model of a children's scarf is good because it will suit any style of clothing: a coat, a sports jacket, and just as a decorative element for a sweater or turtleneck.

To knit such a model, you will need acrylic or wool mixture threads - 50 g, knitting needles No. 3, hook No. 3.

Description of knitting with an analysis of the main patterns

"Polish gum".

Educational video lesson for everyone

And now, for a better assimilation of the technique, we suggest you watch a video lesson.

We wish you a pleasant pastime for your favorite pastime. Let everything you plan turn out quickly and easily!