Women's knitted slippers with a description of the work. An easy way to knit slippers on two needles without a seam. Step-by-step master class with description and photo

What can be knitted from the remnants of different yarns - of course, indoor slippers with knitting needles. For the cold season, half-woolen or woolen yarn in several threads is suitable. Well, in the summer, of course, cotton threads, cord, linen are better. Before knitting slippers, think about what kind of sole to make: you can buy a ready-made insole, or cut it out of felt, fur, leather.

Adorable pink slippers are knitted from thick woolen yarn. Schemes are given for three sizes: 22 cm foot length - size 35/37 (a), 24 cm foot length - size 38/39 (b), 26 cm - 40/42 (c). We knit on two knitting needles, the third - additional - is needed for the “braid” pattern. The main knitting is garter (facial).

For work you will need:

  1. Thick wool blend yarn (50% wool, 50% synthetics) 100 gr./100 m. - 1 skein.
  2. Knitting needles 5 mm thick.
  3. Additional knitting needle for a pattern.
  4. Circular needles for convenience (optional).
  5. 2 pins.

Knitting density: 10/10 cm. = 13 p. / 26 rows. Knitting patterns for the pattern for the left slipper - pattern A 1, for the right slipper - pattern A 2. The pattern depends on the size.

Left sneaker

We start knitting slippers on two knitting needles from the left slipper. We collect on the knitting needles 6 mm - 36/38/40 loops - for a / b / c sizes of the product. Having distributed the loops on the knitting needle, we knit 4 cm in garter stitch. Next, we will knit only on the first 11/13/13 loops, while the rest of the 25/25/27 sts are removed for additional. knitting needle. While we do not touch this part of the knitting, we work with the first loops. Further, we knit these separate first loops (the top of a slipper with a pattern) as follows:

  • 1st row: 11/13/13 p. Facial.
  • 2nd p: we add 2 loops, it turns out 13/15/15 p. facial.
  • 3rd p: add 2 more loops, we get 15/17/17 p. persons.
  • 4th p: knit according to pattern A1 with edge loops, that is, 1 chrome. p., drawing A1, 1 chrome. P.

Thus, according to the scheme, we knit until we reach a height of 6.5 / 9 / 9.5 cm. We knit the last row in such a way as to make 4 decreases. We should get 11/13/13 p.

Now is the hardest part. We have loops for extra. knitting needle, and the upper part of the product. Then we raise the loops of the sides of the top of the slipper, on the one hand - 12/14/16 p., And on the other side of the top another 12/14/16 p. Together with loops with additional. knitting needles should turn out 60/66/72 p. It is most convenient to knit further on circular knitting needles, for lack of knitting on ordinary extra. cn.

Next, we take measurements. We take 1 pin, and mark the mark of the toes with it, mark the middle of the heel with the second pin. Knit 2 cm, and start decreasing one loop on both sides of each pin (knitting two stitches together faces.). That is, in each we decrease 4 p. We make decreases until we reach the height. 5/5/6 cm. We close the loops.

We knit the second, right slipper in the same way as the left one, only knit the top of the slipper according to scheme A 2. We sew the seams on the foot of both slippers. That's all.

Knitting slippers from squares is a good idea. Knitting is exciting, you can make home slippers with knitting needles in one evening, sitting in front of the TV, or listening to good music. Cute closed slippers knitted with a simple pattern of "grain" and "rice" will warm the feet and add comfort. Slippers on 2 knitting needles, crocheted details. At the end of the work, the parts are sewn together, as in the diagram. Size 36-39.

For work you will need:

  1. Thick yarn Pingouin (50 g / 34 m.) 30% wool, 70% acrylic - 2 balls of black and orange.
  2. Knitting needles 4 mm thick.
  3. Hook 4 mm thick.

We knit strips with a garter stitch: 2 rows of black yarn, 2 p. orange We knit the main details with a “rice” pattern and a “grain” pattern. Pattern density: square 10/10 cm = 15 p. / 15 p.

1st p.: 1 cr., 1 person., 1 out., 1 l., 1 out., etc.
2nd and 4th p.: how the mating looks.
3rd row: 1 cr., 1 out., 1 l., 1 out., 1 l., etc.

The second name of this pattern is pearl, here faces simply alternate. and out. loops.

  • Cast on 15 sts on the needles and knit 10 cm. 2 squares A with a “grain” pattern with orange yarn. We thread the thread into the loops, do not close the loops. This is necessary for the flexibility of the seam.
  • Cast on 15 sts on needle and work 1 square B in rice pattern with orange yarn. We knit 10 cm. We also thread the thread in the stitch, and do not close the knitting.
  • Dial. 15 sts and knit 1 square C pattern "rice", color black. We knit 10 cm, not closed. knitting - we thread the thread.
  • Cast on 2 times 15 sts and knit 2 times 10 cm 2 squares in D in black garter stitch. Do not close the knitting - thread the thread.
  • We knit 2 square. E in garter stitch stripes in two colors. (We collect 15 points each, we knit 10 cm each). Not closed knitting - we thread the thread.

We collect squares, following the scheme. For the top of the slipper, we sew side C with side D. After the slippers are sewn, on the sides of the squares E, crochet with a crochet step with black yarn. Rachey step: we do RLS, but from left to right, and not vice versa. We knit the second slippers, like the first. Knitted slippers with knitting needles are ready. Both one and the other slippers are suture, that is, sewn from squares.

Knitted home slippers are a convenient and necessary thing. Such beautiful knitted slippers can be machine washed, they are comfortable and beautiful. Good for a gift, and for yourself, your beloved. A simple version of slippers with knitting needles for beginners. Slippers are decorated with crocheted flowers and embroidery with woolen threads. There is embellishment with beads. Product size - from 36 to 40.

Beginning of work

For work you will need:

  1. Yarn of medium thickness (For example, "Violet" - in 3 threads).
  2. Remains of wool for embroidered flowers.
  3. Beads of various sizes.
  4. Knitting needles 4 mm thick.
  5. Hook for flowers 2 mm.

We begin to knit the base of the slipper. Cast on 34 stitches.

  • 1st p: 1 chrome, 32 persons, 1 chrome.
  • 2nd p.: 1 chrome., 10 persons., 1 out., 10 persons., 1 out., 10 persons., 1 chrome.
  • 3rd - 34th rows:

Odd rows - like the 1st p.

Even. rows - like the 2nd p.

35th p.: 1 chrome, 11 persons., 1 add (knit from 1 p. - 2), 8 persons., 1 add, 11 persons., 1 chrome.

How to make from one loop - 2 loops - adding 1 person. tilted to the left.

36th p.: 1 chrome, 10 persons., 1 out., 12 persons., 1 out., 10 persons., 1 chrome.

37th p.: 1 chrome, 34 persons, 1 chrome.

38th - 63rd:

Even. rows - like 36 p.

Odd R. - like 37 p.

64th - 72nd - gum 1 person / 1 out.

We do not close the loops, leave the tail. Where there was a series of increases - the place where the foot expands.

We start with socks. Pull the remaining tail through the loops in the last row. Pull the thread and secure it by tying a knot (Photos 2 and 3). Then sew the part that is knitted with an elastic band + 8-9 more rows (Photo 4 and 5).

You can make the tracks deeper, or smaller - it all depends on the number of basic loops cast on. Focus on the width of your feet.

Then we proceed to the heel. We pass a thread through the middle of the beginning of our knitting (side A), and tighten this middle part. And 2 parts side by side (B and B) are sewn with a neat seam (Photo 7, 8, 9).

Thus, it turns out such a sneaker-sledok.

Close a chain of 4 VP half-column into a ring. From the same loop, knit a trace. chain from 4 VP, closing the half-column in the ring (Hook in the 1st p. Chain.). Thus, make 4 petals. As a result, Comm. 4th and 1st petal conn. pillar.

You can decorate your slippers in any way, it all depends on your imagination.
For warmth, felt or leather insoles are sewn on.

Beautiful, cozy slippers with knitting needles with a pompom can be knitted on 5 knitting needles, without a seam. The tracks are knitted quickly, they do not need to be sewn at the end of knitting. A very simple master class: "Slippers with knitting needles with a description" - attached. It is especially relevant for beginner knitters.

For work you will need:

  1. 5 knitting needles 4 mm thick.
  2. Yarn of medium thickness (Troitskaya - in 2 threads).

Knitting density: 10/10 cm. = 20 p. / 24 p.

We will make such footprints in the same way as knitting a sock.

Cast on 32 stitches.
1st row: all facial.
2nd p.: 10 facial, 1 out., 10 l., 1 out., 10 persons.
3rd row: how the knitting looks.
4th row: as 2nd.

For those who have never knitted socks on 5 knitting needles, here is a description of how to make a heel. Or maybe they knew how before, but forgot the details - let's refresh our memory. We start forming the heel from the 16th row. For a beautiful heel, you need to knit 10 faces. (This is the side), 1 out., 10 persons., 2 together out. (This is the central part). In the 16th row, we attach 1 p. of the side. We turn the work around.

Starting from 17 p. We continue to knit only the center of the heel (the central part - 12 points), attaching 2 side parts to it in the course of work.

So, 17 p.: Remove 1 p., 10 persons., 12th p. Center. h. remove, 1st p. side h. knitted. persons., we throw the removed one onto the knitted one. Then repeat the 16th and 17th rivers, gradually attaching 2 side parts. It turns out that in izn. rows last p. center. parts + first p. side part - knit 2 together out. But in faces. rows - the last p. Center. h. remove, without knitting, the 1st p. lateral h. knit persons., and transfer the removed p.

Now there are 12 stitches left on the needle. Center. h. Next - dial 10 p. along the edge of the side h. (Look at the photo).

Flip the piece over to the other side. We knit all the sts of the side part, the central part, then we collect 10 sts along the edge of the other side ch. We should have 32 sts on the knitting needles (Look at the photo).

We continue to knit facial. Purl r. - 10 persons., 1 out., 10 persons., 1 out., 10 persons. Facial r. - facial. We knit to the bone on the leg, beautiful faces are obtained on the sole. pigtails. They tied it to the bone, at the end of the faces. row we collect 8 loops on the knitting needle, we close the knitting in a circle.

We distribute all the loops on 4 knitting needles, we knit in a circle in a garter stitch. before our little finger closes.

1st knitting needle: 1 person., 1 remove person., 1 person.
2nd knitting needle: all sts of persons until 3 sts are left on the needle - we knit (two persons together, 1 persons).
3rd needle: same as 1st.
4th: like 2nd.

We knit a spout, reducing the item through a row., Then in each row, until it remains on each. knitting needle 2 loops. We connect all the stitches. Fold the knitting needles in parallel, and remove 2 together. Stretch the last p. inward, and strengthen with a knot.

We decorate slippers with pompoms.

In the video, a story about how to knit simple slippers, very quickly.

Such simple women's slippers for beginners can be knitted even if you are not very strong in knitting. It is enough to learn how to knit with front stitch (alternating faces. and out. R.) and garter stitch (faces. R.). This detailed master class will be useful for beginners, as the master class has its own scheme for each stage. Knit your shoes - it's so cool!

Beautiful slippers on two knitting needles are suitable for size 37-38. The main knitting is the front surface (a row is facial, a row is purl). We do not cut the threads, we just alternate different colors.
Abbreviations: row - r., facial loop - persons. p., purl loop - out. P.,

  1. Yarn used - Vintage Chunky (50% wool and 50% acrylic, 100 gr. - 145 m., Red and white - 1 skein each.
  2. The thickness of the spokes is 5 mm.
  3. Sole, large needle, scissors.

Knitting density - 18 p. / 25 rows = 10/10 cm.

We knit the sole, alternating white and red thread (row - white yarn, p. - red yarn). For the sole, we collect 11 loops on the knitting needles and knit with a garter stitch (one person.).

How to make a set of loops.

1st row facial the whole river. red thread: remove the 1st p., facial to the end of the row.

11 sts on needles.

Adding a loop from the previous row.

2nd p. persons. with white thread: remove the 1st p. on the right knitting needle, without knitting, add the p. from the previous p. (the diagram shows how to do this), knit to the penultimate p., we also add the penultimate p. from the previous one. R., 1 out. It turned out 13 p.

3rd r. facial red thread: knit without additions.

4th p. persons. with a white thread: remove the 1st p. without knitting, increase the p. from the previous one. p., knit to the penultimate p., increase p. from the previous. 1 out. It turned out 15 p. (we knit the last one in order to get a beautiful edge).
Repeat from 1st to 4th p. until there are 23 sts on the needles.

Reduction of loops along the edge of the product.

Next row: decrease 1 p. from each edge (see diagram).

Cast on 35 sts on needles.

1st row: knit with facial red thread. Then comes the faces. smooth surface.

Two r. do with white thread.

6th p.: 12 persons. p., 2 persons together., 7 persons. p., 2 persons together., 12 persons. p. It turned out 33 p.

7th row: knit without decrease.

8th p.: 10 persons. p., 2 persons together., 7 persons., 2 persons together., 10 persons. It turned out 29 p.

Next R.: 2 persons together., 2 persons together., 7 persons., 2 persons together, 2 persons together. It turned out 11 p.

Next R.: 2 together out., 7 out., 2 together out. It turned out 9 p. Close all p.

In order to make the top neater, you can twist the red-white tourniquet and secure it by sewing it in several places.

With a red thread, we collect 11 p. on the knitting needles, and we knit a 20 cm strip of garter stitch (face. p.).

Close all loops. It remains only to assemble and sew the details of slippers.

We sew each end of the red strip with a thick needle to the top of the slipper. Pin the top of the slipper to the sole with pins so that the middle of the heel falls on the middle of the rear edge of the sole.

The middle of the top should be aligned with the middle of the toe. We cut and sew all the details. Sew on the bottom sole of felt or leather. We knit the second pair in the same way.

Rose

We collect 10 sts on the knitting needles with a red thread.

1st p.: persons. loops.

2nd p.: *1 person., 1 yarn over*, repeat to the end of the p.

3rd p.: purl p.

4th: repeat 2nd p.

5th row: purl. R. We close all the stitches and wrap the resulting flower in a spiral. We sew a rose on slippers. Slippers on 2 knitting needles are ready.

If you can’t decide how to knit slippers with knitting needles, and which option to choose, we offer this do-it-yourself knitting option. Everyone will like these slippers: you, husband, son, mother-in-law - in a word, no one will refuse such a present. An excellent, albeit simple, model - slippers-socks on knitting needles with a description.

The master class is given on slippers with knitting needles of the 36th size. For example, if we scored 41 loops on the 36th size of slippers, then on the 39th size of slippers we should dial 50 p., On the 40th size - 54 p., On the 42nd size - 60 p. We knit the top of the slippers with an elastic band 1/1 or 2/2, whatever you like. Slippers for women and men are knitted on two needles, and then the cuff and sole are sewn together.

For work you will need:

  1. Yarn Nako Sport Wool (25% wool, 75% acrylic, 100g/120m)
  2. Spokes regular 5.5 mm.
  3. Knitting needles stocking or circular for making soles.
  4. Markers or pins.
  5. Needle with big eye.
  6. Knitting density: 11 p. / 17 p. = 10/10 cm.
  7. Cuff

We start work with a cuff with a height of 14 cm. Dial on 2 regular knitting needles 5.5 mm. 41 p. (40 + edge).

In the 1st r. we begin to perform an elastic band 1/1, we knit: hem, 1 person., 1 out, 1 person., 1 out, and so on until the end of the row. The last one is faces.

2nd p .: hem., persons, out, persons., out. - to the end of the river. Make sure the rubber band doesn't break.
So we knit 12 rows (6 cm.)

7th p.: 41 p. We need this row to fold the elastic band.

Let's look at knitting. If you bend the cuff, then from which side the product looks better - that side is taken as a face.

We knit another 16 p. (8 cm). Finished the cuff. Next, we will use the central 15 p. to perform the tongue.

tongue

So, we have 41 sts on the knitting needles. Divide all the sts into 3 parts, it will turn out something like this: 13-15-13 sts. We will knit the central 15 sts with facial (garter pattern).

This r. we knit like this: 13 p. persons, you can immediately remove them on an additional knitting needle, 28 persons. to the end of the river Work rotation. Next row: 13 p. Persons, and we also remove them for additional. cn. The central tongue remained. Here we need to make it down to 11.5 cm (34 p.). The full language will be 14.5 cm (40 rubles). That is, the size of your slippers depends on the length of the tongue. The longer the tongue is, the larger the size and the greater the depth will be.

So, we knit 34 p. - we must knit to the middle of the little finger.

35th p.: Krom., 2 persons together., 9 persons., 2 persons together., chrome.
36th p.: (without reductions) chrome., 11 persons., out.
37th p: chrome., 2 persons together., 7 persons., 2 vm. persons., out.,
38th p.: (without deductions) persons, last. - out.
39th river: chrome, 2 vm. persons., 5 persons., 2 vm., out.
40th p.: chrome, 7 persons., chrome.
Leave 9 p. of the tongue on the pin, we will not close them.

It turns out the tongue is 14.5 cm.

It is most convenient to make the foot on circular knitting needles, but it is also possible on 3 stocking needles (one in work).

They began to knit: hem., 12 persons., Raise 20 sts along the right side of the fabric of the top of the foot, 9 persons., Raise 20 sts along the left side, 12 persons., hem. (75 p.)

Sole

We continue where we left off.

1st p. - chrome., 2 persons together., 29 persons, 2 vm. persons., 3 persons., 2 vm. persons., 3 persons., 2 vm. l., 28 persons., 2 vm. l., edging (70 p.).
2nd row: all 70 p. Facial.
3rd river: chrome, 2 vm. persons., 27 persons., 2 vm. persons., 2 persons., 2 vm. persons., 2 persons., 2 vm. persons., 27 persons., 2 vm. l., edging (65p.).
4th p.: 65 p. persons.
5th river: chrome, 2 vm. l., 25 persons., 2 vm. l., 1 l., 2 vm. l., 1 l., 2 vm. l., 26 l., 2 vm. l., chrome. (60 p.).
6th p.: 60 p. persons.
7th river: chrome, 2 vm. persons., 24 persons., (2 persons together.) - 3 times, 24 persons., 2 vm. l., chrome. (55 p.)
8th p.: chrome., 25 persons., 2 vm. l.
It turns out 27 sts on both needles.

We take a needle and sew the seam of the sole from the wrong side with the same thread that we worked with. Then we sew the cuff. That's all. Slippers are ready.

On the video - slippers knitted on any leg in one evening:

Many people like knitting boots, and knitting slippers boots is not at all difficult. According to these descriptions, you will get beautiful knitting boots. To enlarge the photo, click the arrow in the lower right corner.

There are many patterns according to which warm slippers are knitted using only two knitting needles. In the master class, we will talk about simple ways, ideal for beginner craftswomen.


House slippers on two spokes with plaits

The lesson will help you master the production of spectacular slippers for the following sizes:

  1. 35/37 - foot 22 cm.
  2. 38/39-24 cm.
  3. 40/42-26 cm.

The model knits easily because it is made with two knitting needles. This option is perfect for a beginner needlewoman. Here, a garter stitch pattern is used, as well as a braid according to the patterns, for the left slipper it is A1, for the right one it is A2. The diagram shows that the pattern depends on the size of the shoe. Gauge is 13 stitches and 26 rows in a 10 x 10 cm pattern.

Materials and tools:

  1. Mixed yarn (100 g/100 m), 100 grams.
  2. Knitting needles straight and circular No. 5.
  3. Additional needle.
  4. Two pins.

Description of needlework step by step:

  1. For the left slipper, dial 36/38/40 loops. You need to start with a garter stitch, doing 4 cm.
  2. Continue on the first 11/13/13 sts, leaving the rest on a spare needle.
  3. In the first row, all front loops (LP).
  4. Add 2 to 2.
  5. Add 2 to 3.
  6. Follow the fourth row according to scheme A1, with edging along the edges.
  7. Knit according to the pattern until the fabric height is 6.5 / 9 / 9.5 cm.
  8. On the last row, decrease so that there are 11/13/13 loops on the needles.

You have the stitches on the extra needle and the top knit zone. Raise the hem of the sides of the top, on each side 12/14/16 pieces. In total, you get 60/66/72 loops. Continue shaping the slippers, marking the toe area with pins, as well as the middle of the heel. Then knit 2 cm LP, and decrease 1 loop on the sides of the pins (knit 2 LP together). While decreasing, work to a height of 5/5/6 cm, and close everything. To assemble, sew a seam on the sole, making the junction of the two halves. Make the right slipper in the same way, using scheme A 2. If you make a calculation for a small size, you get a children's version of the footprints.

Video tutorials: knitting slippers with braids

Gorgeous royal braid in the center of the shoe.

Easy way for beginners.

Beautiful braided braids and the absence of a seam are the main features of the model.

Making slippers on 2 knitting needles with a description

A simple method allows you to knit original slippers from colored squares.

They are made on two needles and crocheted.

For size 36-39 you will need:

  1. Yarn wool with acrylic thick (50 g / 34 m), 2 skeins of black and orange shades.
  2. Straight needles number 4.
  3. Hook number 4.

The stripes are knitted in garter stitch, changing the color of the yarn after 2 rows. For needlework, patterns such as Rice and pearl pattern are used.

The density of the fabric in a sample of 10 x 10 cm is 15 loops and 15 rows. Connect the squares in this order.

Step by step description:

  1. Work 2 squares A in Pearl Stitch with orange thread. For one, dial 15 loops and knit 10 cm. Do not close the latter, but dial them on a thread.
  2. Then knit 1 square B according to the scheme of Figure Fig, in the same color. Knit 10 cm, and thread through the loops.
  3. From 15 loops make a figure With a figure of Rice, with black threads.
  4. Then 2 black Ds in garter stitch.
  5. Next, work 2 squares E in garter stitch using both colors.

Assemble the product, and finally sew sides C and D of the upper part. Crochet sides E using a crochet step. The advantages of the model are that it can be both female and male, and is knitted with a simple technique. In addition, you do not need to knit such complex parts as the toe and heel.

Video: Simple quarter slippers

Slippers made of cotton on two knitting needles

To knit slippers in size 36-40, prepare:

  1. Cotton yarn.
  2. Remains of wool and beads for decoration.
  3. Needles number 4.
  4. Hook number 2.

Detailed description:

For the base, you need to dial loops in the amount of 34, and knit in the following way.

  1. 1-row: edge, 32 LP, edge.
  2. 2nd: edge, 10 LP, 1 purl loop (PI), 10 LP, 1 PI, 10 LP, hem.
  3. From 3 to 34: odd as the first, and even as the second row.
  4. 35th: after hem 11 LP, 1 add (from 1 loop 2), 8 LP, 1 add 11 LP, hem.
  5. In the 36th row: edge, 10 LP, 1 PI, 12 LP, 1 PI, 10 LP, hem.
  6. 37th: edge, 34 LP, edge.
  7. 38 to 63: even as 36 and odd as 37.
  8. From 64 to 72, a 1 x 1 elastic band is knitted.

You will receive such a blank.

Hand-knitted indoor slippers will be especially warm and cozy for you and your family. Agree that a thing that is done by one's own hands is saturated with positive energy and warmth of a craftswoman. Each novice needlewoman in the field of knitting will be able to make slippers for the whole family with her own hands without any problems.

To help knitters, this article was created, in which you can find free patterns for high-quality knitting of warm and cozy slippers using knitting needles for beginners and experienced craftswomen, descriptions for them, as well as educational video tutorials. Look through all the options presented, choose the one you like, and you can start to “conjure” over the knitting needles and the ball.

A lazy version of knitting slippers with knitting needles with patterns

The photo shows a model made with two knitting needles, which can be knitted not just by beginner knitters, but even by those who just picked up knitting needles today and mastered the technology of knitting facial loops. To perform this version of home shoes, you don’t need to know anything else, which is why they are called “lazy”, since special efforts and knowledge are not required to perform them. Watch the following tutorial and see for yourself. At first glance, these house slippers do not look very attractive, but on the leg they look pretty.

Step-by-step master class with description and photo

The entire piece is garter st (all sts in all rows are knit). Cast on 14 sts and knit 14 rows. Then pick up another 14 sts on the needle (= 28 sts).

Product Assembly: To assemble the lazy slippers, see the following step by step photos.

You can change the size of the product in the way of a larger or smaller set of loops.

Model created quickly and easily on two needles

Knitting slippers on 2 knitting needles is a fast and interesting process. Especially if the model of indoor shoes is original and unusual. Look at the next photo.

How do you like these "dwarf slippers"? They can't help but like it. And working on their creation is a real pleasure. They knit in the same breath. In the evening, you can definitely complete a couple of such slippers, or maybe two. This model will look very bright and fun if you knit it from multi-colored threads, at the same time there will be a use for the remnants of yarn. You can decorate slippers with pompoms, tassels or knitted appliqués.

In a similar way, and are created, try to knit them with your own hands!

Introductory information for everyone

Product size: 35-37. Foot length: 22 cm. For knitting, you will need 100% wool yarn (36 m / 100 g) - 100 g, knitting needles No. 10.

Gauge: 8 sts of pearl pattern = 10 cm wide.

Pearl pattern:

1 row: * 1 person., 1 out. *, repeat from * - *.

Row 2: Knit on purl stitches and purl on knit stitches.

3rd and all subsequent rows knit as the 2nd row.

Additions: perform additions on faces. side of the work, making 1 yarn over. In the next row, knit a crochet behind the back wall.

Step-by-step instructions with a description of the work

Knit in straight and reverse rows, starting from the toe. While casting on, leave the end of the thread for sewing slippers about 30 cm long.

On the knitting needles, dial 8 p. 4 persons., 1 yarn. 2 persons. (= 10 p.). Knit 1 row in purl. side of the front p. Next, perform additions in the next row in this way: 4 persons., 1 yarn over. 2 persons., 1 yarn, 4 persons. (= 12 p.). Link 1 out. a row of facial sts. Continue working on all loops with a pearl pattern.

Knit the product to a height of 9 cm. Then dial 9 new sts at the end of the next 2 p. (= 30 p.). Continue knitting on all loops with a pearl pattern. At a height of 21 cm, knit the next person. a row in this way: 9 persons., turn the work, knit a reverse row. Next, cast off the 1st 21 sts (= 9 sts on needle). Knit 2 rows on these loops and finish knitting.

Having mastered this simple knitting technique, you can move on to something more complex. For example, try linking .

How can you assemble the finished product yourself

Assembling the product: stretch the thread through 8 p. of the typesetting row, pull off the sock and sew the product edge to edge along the central upper part of the leg, leaving an open section 6 cm long from the top. Next, sew together the edges of the slippers in the center of the back edge to edge.

A wonderful product according to the Japanese method with a photo

Looking at the next photo, it is unlikely that any of you will remain indifferent to these wonderful slippers.

This model is connected by Japanese technology. Read the description and look at the step by step photos. Everything is quite simple and clear. Knitting such a model of indoor shoes is a fascinating process, and the result is obvious.

Description of knitting for needlework beginners

Dial 40 sts on the needles with a thread in 2 additions and knit with an elastic band 2x2 18 cm.

Then knit straight for 20 rows. Close loops.

From the other edge of the gum, pick up 40 sts on the knitting needles and knit a garter stitch with decreases in the same way as on the opposite side. Get this detail.

Fold the finished knitted piece in half and sew on the sides (where the elastic band is 2x2).

Final result:

If you do not know what gift to give to children, read - you will definitely like it!

We create children's slippers according to an interesting lesson for everyone

Knitting baby slippers can be turned into real magic that will take place in front of your beloved child. Not just a knitted fabric will come out from under the knitting needles, but a cute and beautiful mouse or hare, or maybe even a pig. "How?" - you ask. And it's very simple. The next master class will tell you how to knit such shoes in the form of animals.

The description is given for such “mouse slippers”, but you can decorate them as you wish under any other animal. Believe me, your child will wear such house shoes with great desire and pleasure.

Product size: 25-26. For work, you will need wool / acrylic yarn - 100 g, leftover yarn for decoration, knitting needles No. 3, hook No. 3.

Detailed MK for beginners in knitting

  1. Cast on 28 sts on needles and work rib 1x1 (*knit 1, purl 1 *) 4 cm (= 12 rows).
  2. Next, knit the product. satin stitch.
  3. To form the heel, divide the work into 3 knitting needles (on the extreme knitting needles, 10 sts each, on the central knitting needle, 8 sts).
  4. Next, perform only the middle part, knitting at the end of each row on each side the last loop together with the 1st st of the extreme knitting needle, thereby gradually reducing the number of loops from the extreme knitting needles.
  5. When turning the work, the 1st p. of the middle part does not need to be knitted, remove it like an edge. Thus, knit until there are no loops left on the extreme knitting needles.
  6. Next, knit in a circle: there are 8 sts on one knitting needle, on the 2nd knitting needle from the side of the gum, lift 10 sts, on the 3rd knitting needle, type 10 additional sts, on the 4th - 8 sts on the side rubber bands.
  7. Knit the product further in circular rows of faces. loops 6 cm. After 6-7 cm, perform 2 sts together at the beginning of each knitting needle.
  8. When 1 stitch remains on the needles, knit them together. Cut the thread and fasten to the inside. side of work.
  9. Crochet the eyes and nose with matching threads.
  10. For knitting ears, dial 3 air. n. and knit as follows:
  11. 1 row: 2 tbsp. b / n.,
  12. 2nd row: 3 tbsp. b / n.,
  13. 3rd row: 4 tbsp. b/n.
  14. Sew the ears to the slippers.

Small "mouse slippers" are ready not only to warm the baby's leg, but also to play with him.

Video lesson with diagrams

Here are such simple and affordable models of home slippers that can appear on your shoe shelf. And if your household will have a choice about which slippers to give preference to - factory-made or knitted by your hands, then the answer to this question is obvious. So hurry up to please your most dear and beloved people with a beautiful, comfortable and warm gift - watch our video tutorial and start working miracles!

Easy implementation of "knitted" ideas for you!

When a person rests at home, he wants comfort and convenience for himself. In creating ideal home conditions, an important role is given to slippers, which create comfort and warmth for the feet. You can knit such a favorite thing yourself with your own hands, knitting needles, providing yourself with long-awaited comfort.

We will tell you how to knit slippers for the whole family, women's, men's or children's, following all the recommendations of our step-by-step instructions.

We prepare tools and materials

To knit home slippers with knitting needles for beginners, you must first of all have knitting needles. They come in different thicknesses, which determines the selected type of knitting. If you want to have lace slippers, the knitting needles should be thicker, and thin knitting needles can also be used to create strong tracks.

Yarn must be chosen very carefully. An important indicator is the strength of the yarn. It should not fray or shed and should be pleasant to the touch. When creating slippers for children, you need to pay attention to whether the finished product will not slip. The most successful option are threads in which a certain amount of synthetics is added to natural wool, which always slips and pricks. Knitting needles can be used straight or on a fishing line. Most often, homemade knitted slippers are made on two knitting needles, but we will also tell you how to knit slippers using five knitting needles.

Of the tools, you will also need a centimeter tape, a gypsy needle and a hook. It is desirable to have a dense fabric for the insole, and even better - leather or felt.

Product sizing

There will be slippers connected by you designed for a child or for an adult, depending on the knitting process. You can measure traces in exactly the same way as socks, therefore, you can use the standard loop calculation scheme that is used when knitting socks. If you are going to use a dense sole or are going to knit slippers in a different way, without seams, you can determine the size based on the size of the shoe.

You can also measure the ankle circumference and instep height. These two numbers are added and the sum is divided in half. Depending on the density of knitting, which can be determined from the sample, the number of loops to be cast on is calculated.

We offer you a video on how to knit slippers on 2-5 knitting needles:

Home slippers.

They fit on the 36-37th size. Used acrylic yarn of two colors, which is 100 grams per 1600 meters, folded eight times. Knitting needles were used with a diameter of 2.5 mm. We collect 66 loops with black thread. The first two rows are knitted with facial loops, and the subsequent rows are knitted in accordance with the pattern shown in the video.

Video lesson:

Slippers for children.

They are designed for 26-27 size. Used thick acrylic yarn and knitting needles No. 3. To begin with, 30 loops are typed. And immediately we begin to knit an elastic band 1 x 1, remove the edge loop without knitting, and then alternate the front and back loops. We knit the last loop with a purl loop. Having unfolded the knitting, we continue to knit so that over the front loops we get the front ones, and over the wrong ones - the wrong ones. Thus we knit 8-10 rows.

Video lesson:

Home tracks "Sloths".

The yarn for knitting was used by Alize Lanagold, a wool mixture, which contains 240 meters in 100 grams. Knitting needles can be used number 3.25 plastic or metal. On metal, the yarn glides better, and the size of the product is slightly larger. In this case - 38-39 size. Both the front surface and the garter stitch stretch very well. First, 65 loops are cast on, and 6 rows are knitted with a garter stitch, then the thread changes, and the front surface is knitted.

Video lesson:

Slippers in two colors with patterns.

Designed for 36-37 size. The yarn used is acrylic, which contains 1600 meters in 100 grams. Used circular knitting needles No. 2.5 and hosiery for knitting the tongue. Cast on 54 stitches and work in garter stitch (all knit stitches) for seven rows. Next, we knit one front row and the second wrong side. Next, the color of the thread changes, and two front rows are knitted. Now we start knitting the pattern.

Video lesson:

Slippers "Pearl pattern".

They have a comfortable knitted sole. The yarn used is the simplest, Caucasian yarn is taken, rather thick. In addition to circular knitting needles, you will need another auxiliary knitting needle. About 100 grams of thread will go on both slippers. Leaving the tip of the thread longer to sew the seam at the end, we collect 46 loops. Next, two rows are knitted with an elastic band 1 x 1, alternately front and back loops. Those wishing to get higher slippers, this gum can be increased by a couple of rows.

Video lesson:

Slippers from yarn "Marta".

In a yarn that is 100% tactifil (a type of acrylic, specially processed), there are 120 meters of thread per 100 grams. The yarn is very soft and velvety, it looks and feels like cotton. For slippers, you will need 80 grams of yarn, knitting needles No. 3.5 for knitting gum and No. 4 for the rest of knitting. You will also need toe knitting needles. First, an elastic band is knitted, then a toe, then a side part, a sole. On the heel, two seams are obtained - vertical and horizontal.

Video lesson:

Slippers "Tri-color pattern".

Slippers are knitted from separate parts. Size - 36-37. The yarn used is acrylic, 100 grams of it contains 1600 meters, the thread was folded six times. Knitting needles - stocking, then circular, diameter 2.5 mm. The thread is used in three colors - blue, white and light blue. We collect 10 loops on the knitting needles, we knit one row with facial loops. Next, a thread of a different color is tied, and a pattern begins to form.

Video lesson:

Slippers "Quick".

Tied to size 33-35. Knitting needles of size 4.0-4.5 were used, yarn - bulk acrylic. We collect 28 loops and start garter stitch with some facial loops. The extreme loops are edge, and the rest are all facial. We turn the knitting over, and the second row is knitted like this: the edge loop is removed, eight facial loops are knitted, then one purl and then again eight facial loops. The third row repeats the first: one edge loop and all the rest are facial.

Video lesson:

Slippers with "shells".

Size 36-37. Used acrylic yarn, 100 grams of which - 1600 meters. Knitting needles - circular, three-millimeter. We collect an odd number of loops with a black thread (in this case, 47) and knit three rows with facial loops. The fourth row is knitted with a red thread, alternating knit and slip stitches. On the fifth row, a red thread is also used. Loops alternately, according to the drawing - purl and removed. Next, six rows are knitted with black thread with facial loops.

Video lesson:

Simple slippers.

A simple way of knitting slippers from Caucasian yarn is proposed, in which there are 130 meters of thread per 100 grams. For slippers, the consumption of yarn is approximately 100 grams. The knitting needles were used No. 3. Slippers turned out to be 36-37 in size, you can not make patterns on the sides or replace them with another pattern. An odd number of loops is cast on - 31. Next, an elastic band 2x2 or any other is knitted.

Video lesson:

Knitted slippers, knitted according to a wide variety of patterns (including those on two knitting needles), are a great alternative to home shoes for children and adults, as well as a touching, sincere, warm handmade gift for loved ones.

Even the most inexperienced craftswomen who are familiar only with the basics of knitting can make this useful element of a home wardrobe, for this you just need to choose the right model with a description of the work and clearly follow the recommendations.

Yarn for slippers

Knitted slippers must be not only beautiful and warm, but comfortable to wear, otherwise they will not be able to fully please their owner.

The comfort of a knitted product largely depends on the yarn, so when choosing it, you need to take into account some important nuances:

  1. To make the product as warm as possible, it is important to pay attention to yarn composition. Experienced knitters recommend choosing natural woolen and half-woolen threads for socks and slippers. Products from them are very warm, breathable, and also the most durable.
  2. The second important parameter is yarn thickness. If you choose a thin thread, then the slippers will not be warm, if the yarn is too thick, then the product may not be very comfortable to wear. The best option is threads of medium thickness: 200-300 m / 100 g. You can also take thinner yarn, but knit the product in this case in 2-3 thread additions.
  3. If slippers will be knitted for a child, you should give preference to a special baby yarn, because it is hypoallergenic, has a safe composition and is very pleasant to the touch.
  4. Choice product colors always remains with the craftswoman, but if the slippers are knitted from various leftover yarns, it is very important that they not only match in color, but also be of approximately the same thickness and texture. If this simple rule is not observed, the knitted fabric may turn out to be uneven and sloppy.

What sole to choose (make) for slippers

Slipper soles can be made from a variety of materials. The simplest and most common option is the sole, knitted from the same or denser yarn as the slippers.

For strength, many needlewomen add one more thread to the main thread while knitting it.

If a more wear-resistant option is required, then the sole can be made of felt or thick leather. Its shape is easiest to cut out according to a suitable insole. The sole can be made separately and then tied or sewn to the finished product.

Knitting needles

For knitting socks and slippers, craftswomen use special knitting needles, which are sold as a set of 5 pieces. They differ in the material of manufacture (metal, wood, plastic) and diameter (marked with numbers).

The material from which the spokes are made does not matter, it is a matter of personal preference.

The number of knitting needles is selected depending on the nature of the product and the thickness of the selected threads. For knitting slippers and socks, it is recommended that the diameter of the knitting needles approximately coincide with the thickness of the thread, in this case it will be most convenient to knit, and the fabric will turn out to be dense, even and beautiful. For example, for yarn 250-300 m / 100 g, knitting needles No. 2.5-3 are optimal.

Additional accessories for knitting slippers

In addition to yarn and knitting needles, when creating knitted shoes, you may need:

  • knitting markers (special plastic hooks used to highlight loops in calculations);
  • a hook (with its help it is convenient to hide the “tails” of the cut threads, as well as tie the edges of the finished products);
  • thick needle with a wide eye (for stitching products).

All of these knitting supplies can be purchased at craft stores along with yarn and knitting needles. Do-it-yourself women's and children's slippers can be supplemented with accessories that will make the thing more interesting, beautiful and unique in its own way.

For this purpose, use:

  • decorative buttons;
  • beads;
  • crochet flowers;
  • bows and ribbons;
  • pompoms, etc.

Common abbreviations

Knitting (slippers on two knitting needles): schemes, descriptions of the work presented below contain generally accepted abbreviations:

  • Loops - p .;
  • facial loop - l. P.;
  • purl loop - i. P.;
  • edge loops - chrome;
  • row - r.

Simple slippers on two spokes

This simple model of slippers is knitted on two knitting needles in just a couple of hours, the proposed scheme is ideal for beginner needlewomen: it will help you “fill” your hand and please you with an original appearance. Calculations are given for foot size 38-39.

Necessary materials

Scroll:

  • Yarn (300m / 100g) - 1 skein.
  • Needles number 3.
  • Knitting markers.
  • Stitching needle.
  • Additional accessories.

Sequence of work

Performance:


Slippers on two knitting needles from a rectangle

This original model of slippers in appearance resembles oriental shoes, while knitting it on two knitting needles is very easy, because during operation you will not even need to perform any increases and decreases according to the scheme. At the base is a rectangle knitted with a garter stitch (all rows are performed only with facial loops).

The most impressive look are similar traces made of sectional dyeing yarn., but you can knit them from plain threads, and from multi-colored residues.

For work you will need:

  • Yarn (250 m / 100g) - 1 skein.
  • Needles number 3.
  • Needle.
  • Hook.

Sequence of work

Performance:

  1. First of all, they perform calculations so as not to be mistaken with the size of slippers. Measure the length of the foot, multiply by 2 - this is the required width of the rectangle. A test sample of 10 sts is knitted from the yarn you like, it is measured and the required number of loops is calculated for the resulting width.
  2. Based on the resulting calculations, loops are cast on the knitting needles, a rectangle 12 cm high is made with a garter stitch. The loops are closed, with the help of a hook they process the top in any convenient way - with columns, pico or “shells”.
  3. Fold the rectangle in half, form a toe, folding the edges of the product in the shape of a cone. Sew along the line of the sole.

Men's knitted moccasin slippers

Men's slippers, reminiscent of moccasins, are knitted on two knitting needles according to the above pattern quite easily and quickly, but at the same time they look very original. The given calculations correspond to the size 40-41. The entire product is made in a simple garter stitch, that is, in all rows, the loops are always knitted only with facial ones.

To make them you will need:

  • Yarn of medium thickness -80 g.
  • Needles number 3.
  • Hook for decorative processing.

Sequence of work

Performance:


Slippers-footprints on two knitting needles without a seam

The most comfortable for adults and children are socks and slippers knitted on two knitting needles according to a seamless pattern: they fit snugly to the leg, without causing inconvenience when worn. Seamless slippers are also beneficial because they can be worn not only at home, but also worn under shoes in cold weather.

The master class presents calculations for foot size 36-38.

Prepare materials:

  • Yarn (250 m / 100g) - 1 skein of the main color, 50 g of finishing yarn in a contrasting color;
  • Needles number 3.

Sequence of work

Performance:

  • With the main yarn, 47 sts are typed on the knitting needles. Rows 1-6 are performed with a standard elastic band (chrome, 1 ip, 1 hp).
  • Find and mark the center with a knitting marker (24th p.). Continue to work with a finishing thread: chrome, * 1 ip, 1 l.p., 1 ip, 1 p. transferred to the knitting needle, (do not knit, thread at work) * - then repeat from * to * to the center. Before the marked loop, a yarn is made, the central one is removed, another yarn is made, and a row is knitted by analogy with the first half. The wrong side must be knitted as the pattern looks, the removed loops are also transferred (not knitted), the thread is left before work. Before the central loop and after it, yarn overs are also performed, while the yarn overs from the previous front row are knitted with a crossed front one.
  • Again they switch to the main yarn: chrome., * 1 ip, 1 l.p. transfer (thread at work), 1 and. p., 1 l. n. * - repeat from * to * to the center. The central loop is knitted with the front one, crochets are also performed before and after it. Knit to the end of the row in the same pattern. The purl row is performed by analogy with the previous one.
  • According to the described principle, 14 subsequent rows are repeated, alternating the main and finishing threads.
  • They proceed to knitting the sole: count the average 15 points, mark with markers. They are knitted with the main yarn with an elastic band according to the pattern up to the central 15 p. They are also knitted with an elastic band, the extreme loop and the first from the side row are knitted at the same time. The work is being expanded. Knit 14 sts according to the drawing, knit the last loop simultaneously with the first from the side row, then the work needs to be turned around again. They continue to knit according to this principle, as a result, only 15 sts should remain on the knitting needles.
  • Heel. On both sides of the central 15 sts, 16 sts are collected from the hem. The heel is formed according to the same principle as the sole, i.e. you need to knit two loops at the same time from each edge, until only 15 loops remain on the knitting needles again. Close the loops. Using a hook, hide the tails of the cut threads, decorate as desired.

Children's slippers on two spokes

In winter and autumn, it is especially important to make sure that the feet of the kids are always warm - both at home and on the street. Track slippers will ideally cope with this task, besides, you can knit them according to the above pattern on two knitting needles in just one evening. Calculations are given for slippers for a child up to a year.

For knitting you will need:

  • Children's wool or acrylic yarn - 60 g of the main color, 30 g of another color for finishing.
  • Needles number 3.
  • Hook.

Sequence of work

Performance:


Any of the above knitting patterns for slippers on two knitting needles can be taken as the basis of your work, and the size can be varied depending on your needs, adding or subtracting the number of loops and rows.

The same can be said about the design of knitted slippers: color schemes, variations on the theme of patterns and decor have no limits. Knitting is a creative process that brings not only practical benefits, but also pleasure.

Video: knitting, slippers on two knitting needles

How to knit slippers without seams, video tutorial:

Traces on two knitting needles, see the video clip: