Scheme of knitting sweaters bat on knitting needles. How to knit a bat sweater (with diagrams). Sweater "bat": description

Jacket "bat" knitting needles, knitted across

Knitted women's jacket, made of thick yarn with a batwing sleeve.
The jacket is knitted across.

Size: Russian, 42/44 (46/48, 50/52), the photo shows the size 42/44.
Materials: 800 (900, 1000) g. of Steinbach Wolle Sport yarn (acrylic + wool, 100 g / 140 m.), needles No. 6, 4 buttons, additional needles.
Knitting density: 13 sts * 20 rows = 10*10 cm in stockinette stitch with #6 needles

Cross 4*4 left: remove 4 loops on an additional knitting needle for braids, leave them before work, knit 4 faces. from the left needle, then knit 4 persons. with an extra needle.
Cross 4*4 right: remove 4 loops on an additional knitting needle for braids, leave them at work, knit 4 persons. from the left needle, then knit 4 persons. with an extra needle.

Rubber:* 1 person., 1 out., repeat from *.
Braid (= 12 loops):
1st row: 12 persons.
2nd and all out. rows: 12 out.
3rd row: cross 4 * 4 loops to the left, 4 persons.
5th and 7th rows: persons. loops.
9th row: 4 persons., cross 4 * 4 to the right.
11th row: persons. loops.
12th row: out. loops.
Repeat 1-12 rows for the pattern.

Jacket "bat" with knitting needles, how to knit

Right sleeve: Cast on 39 (41, 43) sts.
Knit a row of facial loops.

At the same time, add 7 loops evenly along the last row of elastic.
Further knit: 17 (18, 19) loops in the wrong side, 12 loops of the braid, 17 (18, 19) loops in the wrong side.
In the second row of work, add 1 loop on each side.
Repeat inc 1 st on each side, every 4th row, until you have 77 (80, 83) sts on needle.
Knit evenly without increments to a height of 52 (53.5, 55) cm from the gum.
Close the central 6 loops for the neck, knit the back and front separately.

Shelf: close from the side of the neck in every second row 3 loops - (1, 2, 1) times, 2 loops - 2 times and 1 loop - 6 (5, 6) times.
At a height of 61 (63.5, 66) cm, start knitting with an elastic band 1 person., 1 out. - 6 rows.
At the same time, make 4 holes for buttons (2 together, yarn over) along the 3rd row of elastic.

Back: continue knitting with purl stitch.
At a height of 61 (63.5, 66) cm, put the loops on an additional knitting needle.

Left sleeve: knit symmetrically to the right, knit a shelf and back as symmetrically.
Do not make holes for buttons.
Close the loops on the backs of the right and left sides together, sewing it in this way.

Bottom binding: Sew sides, cast on 115 (127, 139) sts along underside of front and back.
Knit with an elastic band 1 persons., 1 out. - 10 rows.
Close loops.

Neck strap: Cast on 69 (73, 77) sts along the neckline.
Knit with an elastic band 1 persons., 1 out. - 6 rows.
Close loops.
Sew on buttons.

Knitted bat jacket, pattern:


Openwork blouse with a sleeve "bat" very comfortable to wear. This blouse can be worn with or without a turtleneck. Great option for chilly days. The size of the finished product is 46 Russian. Difficulty level is hard.

For work you will need:

  • 350 g of Merino Gold yarn (60% wool - 40% acrylic; 100g - 400m);
  • Hook #4;
  • Needles number 2.

Description of the process of crocheting an openwork blouse with a bat sleeve:

In order to start knitting, you need to make a pattern according to your size, and also tie a control size.

Pattern for knitting a blouse with a bat sleeve:

Knitting pattern for a blouse with a batwing sleeve:

Knitting back

Dial a chain of 133 air loops - 7 rapports of an openwork pattern. Knit 19 cm with an openwork pattern according to the scheme, making an extension on both sides of the fabric. Be sure to make a pattern that matches your measurements, and, in the process of knitting, regularly apply the back fabric to the pattern. At a height of 19 cm, the knitted back sheet should be 1 m wide. Knit another 30 cm, which corresponds to the width of the sleeve.

Knitting front

Knit the front fabric, completely copying the back.

Assembly

Run side seams. Sew 35 cm from the edge of the sleeve to the center from the top, and repeat from the edge of the other sleeve, leaving 30 cm in the middle for the neckline.

Tie the neckline and the edges of the sleeves in one row, and one row.

Blouse binding

From the bottom of the blouse, dial 240 loops on the knitting needles and tie 60 rows (14 cm) with an elastic band 2x2.

We hope everything worked out for you.
Share with us your result and leave comments.

November is in the yard: the time of cold weather, rains (and for some it even started to snow!) And endless dullness outside the window. Just for this occasion, we decided to pick up for you, dear knitters, three descriptions of sweaters!

A bat-knitted sweater will not only keep you warm in the autumn-winter cold, but will also be a great hand-made gift for your family and friends, so we recommend stocking up on hot tea, knitting needles, yarn and endless patience.

Asymmetric Batwing Knitted Sweater

For work we need:

  • pink yarn with mohair content (65% acrylic, 35% mohair, 50 grams per 190 meters) - 5 (6, 7, 8, 8) hanks;
  • cn. No. 5;
  • cn. No. 5.5;
  • cr. cn. No. 5.

The knitting density is 18 p. x 22 p. = 10 x 10 cm.

The product can be linked in these sizes: S (M, L, XL).

Sweater "bat": description

Back and front of the product

Using direct sp. No. 5, we dial 89 (93, 101, 105) p. And then we continue to work with an elastic band 2 x 2 to a height of 9 (9, 10, 10) cm. We continue to work according to scheme 1:

Important! We knit the first row in the direction from left to right.

We knit 4 loops before rapp., rep. rapp. according to cx. x 21 (22, 24, 25) times, finish 2 loops after rapp. and get 11 (116, 126, 131) p.

We repeat from 1 to 12 rr. according to the diagram.

Having knitted the 7th p., we begin to perform decreases according to scheme 2 (from 8 p.):

We decrease one loop on both sides in every third row x 35 (37, 37, 40). Loops are set aside.
The front of the jacket is knitted in the same way.

Bat sleeve

Direct sp. No. 5.5 we collect 89 (89, 93, 93) loops and knit further with a pattern according to cx. 1, starting from the seventh row: 3 p. to rapp., rep. rapp. x 21 (21, 22, 22), finish 2 p. = 110 (110, 115, 115) p.

We continue knitting 7-12 rr. according to cx., while simultaneously performing the reduction of the 8th p. according to cx. 2.

Rep. 1-12 rr. according to cx. 1, simultaneously kill 1 p. on each side in every third row x 35 (37, 37, 40). Set aside the loops.

Assembly

We carry out raglan seams. We remove all the loops on the common sp. and start knitting with an elastic band 1 x 1, at the same time subtracting 5-4-5-4 stitches above the loops of each of the sleeves. As a result, 10 (8, 10, 8) sts should be reduced. We continue knitting with an elastic band 2.5 cm, after which we close the loops.

Bat sweater - video master class

Warm winter sweater with a beautiful pattern

For work we need:

  • yarn (50% wool, 50% cotton, 120 meters per 50 grams) blue;
  • cn. No. 4;
  • cn. No. 4.5;
  • cr. cn. No. 4.5.

The product can be linked in these sizes: 42-44 (48-50).

During knitting, the following will be used loop types and patterns:

  • Pearl pattern: alternate 1 l. n. and 1 and. p., shifting the pattern by 1 loop in each new row.
  • Openwork diamond pattern (rapp. 18 + 4 + 2 edging): knit according to the scheme below.

Winter sweater with batwing sleeve: description

Back

Sp. No. 4 we collect 114 (132) p. And we knit for the bottom plank between the edges. pearl pattern 1 cm (approximately 3 p.), Starting from the wrong side. R.

Let's go to sp. No. 4.5 and continue knitting with an openwork pattern with rhombuses. At the same time, in the 1st p. from the bottom bar we add on both sides for the side bevels, first 1 x 1 p, then another 48 times in each. 2 p. and 11 times across. in every 2 p. and in each 4 p. about 1 p., on the added p. we knit with a pearl pattern. As a result, we should get 234 (252) p.

Having knitted 46.5 cm = 130 p. from the bottom plank, we continue knitting, dividing the loops of the patterns: edging. p., 60 p. pearl pattern, 112 (130) p. openwork pattern with rhombuses, 60 p. pearl pattern, edging. P.

After 63 cm = 176 p. (65 cm = 182 p.) from the bottom bar, close the loops in one row: the central 50 (58) p. create a straight edge of the neck.

Front end

It is knitted in the same way as the back, but the neckline here will be round. To tie it, after 56.5 cm = 158 p. (58.5 \u003d 164 p.) from the bottom plank we close the central 20 (28) p. And then we knit each side separately.

To round the neck, close from the inner edge in each. 2 p. 7 x 2 p. and 1 x 1 p. close the remaining 92 (97) sts of the shoulder / sleeve. The second side is knitted in the same way.

Assembly

We carry out seams on sleeves and shoulders. For the collar, we collect kr. cn. No. 4.5 along the edge of the neckline 120 (136) p. and continue knitting in a circle with a pearl pattern to a height of 20 cm, after which we close the loops according to the pattern.

After that, we knit wide cuffs with knitting needles: we collect 62 (70) p. And then we make an elastic band 20 cm and close the loops according to the pattern.

It remains only to complete the seams on the sides and on the inside of the sleeves. Knitted winter sweater is ready!

We knit a pullover Bat - video MK

Selection of schemes



Comfortable knitted pullover with Batwing sleeves is made with knitting needles on the wrong side.

The description is given for size S (M, L, XL). Bust 80 (90, 100, 110). Back length 53 (55, 57, 59) cm.

To knit a pullover, you will need 10 (11, 11, 12) skeins of yarn (100% merino wool, 115 m / 50 g); straight needles 4 mm and circular needles 4 mm 40 cm long, circular needles 5 mm 100 cm long, auxiliary needle, stitch holders, knitting needle.

Knitting density: 19 p. and 25 p. = 10x10 cm in stockinette stitch with 5 mm knitting needles.

Conventional designations.

2/1 IL - remove 2 sts on the auxiliary. knitting needle before work, 1 out., then 2 persons. with auxiliary spokes.

2/1 IP - remove 1 p. on the auxiliary. knitting needles at work, 2 persons., then 1 out. with auxiliary spokes.

2/1 LL - remove 2 sts on the auxiliary. knitting needle before work, 1 person., then 2 persons. with auxiliary spokes.

2/1 LP - remove 1 p. on the auxiliary. knitting needle at work, 2 persons., then 1 persons. with auxiliary spokes.

Back.

On long circular needles 5 mm, cast on 100 (110, 120, 130) sts. Do not join in a circle. Knit 6 rows with an elastic band 1 persons., 1 out. Finish on purl row.

Track. R. (RS): 48 (53, 58, 63) purl, then 4 persons, then purl loops to the end of the row.

Track. R. (IP): 48 (53, 58, 63) persons., Then 4 out., Then facial loops to the end of the row.

The last 2 rows form the main knit. Work as set for 0 (2, 2, 2) more rows.

Sleeve shaping.

Track. R. additions (RS): 1 out., from 1 p. knit 2 out., then according to the figure to the last 3 loops, from 1 p. knit 2 out., 2 out.

Repeat inc on every 4th row 0 (2, 6, 9) more times, then on every 2nd row 47 (43, 37, 32) more times = 196 (202, 208, 214) sts. Continue knitting straight until piece measures 51.5 (53.5, 55.5, 57.5) cm from start. Finish on purl row.

Neck formation.

Track. R. (RS): 84 (86, 89, 91) purl., Transfer the next 28 (30, 30, 32) center loops to the holder, attach the second ball and finish the row with purl loops.

Next, knit both sides at the same time from different balls. Bind off 2 sts on each side of neck on each even row twice, then loosely close off (or slip to scrap) 80 (82:85:87) remaining sts on both sides.

Before.

Start and knit as a back to a height of 30.5 (30.5, 33.5, 33.5) cm from the beginning of work. Finish on purl row. Then continue the formation of the sleeves and at the same time perform the central triangle as follows:

Track. R. (RS): Purl to one stitch in front of the 1st front loop of the row, then 2/1 PI, then 2/1 IL, then purl loops to the end.

Track. R. (RS): Purl to one stitch before knit 1 of the row, then 2/1 LP, then purl 2. and 2/1 LL, tie a row of purl.

Track. R. (RS): knit according to the pattern.

Track. R. (RS): Purl to one stitch in front of the 1st knit stitch of the row, then 2/1 LP, 1 knit, 2 purl, 1 knit, then 2/1 LL, finish the row with purl.

Track. R. (IP): knit according to the pattern.

Track. R. (RS): purl to one loop in front of the 1st front loop of the row, then 2/1 PI, 2 persons., 2 out., 2 persons., Then 2/1 IL, tie a row of purl.

Track. R. (IP): knit according to the pattern.

Track. R. (RS): purl to one loop before the 1st front loop of the row, then 2/1 PI, 1 out., 2 persons., 2 out., 2 persons., 1 out., then 2/1 IL, finish purl row.

Continue forming the center triangle as established by working a 2x2 ribbing from the moved sts. When the height of the part reaches 44.5 (45.5, 4.5, 49) cm from the beginning of work, proceed to the formation of the front neck.

Track. R. (RS): Knit according to pattern 89 (91, 94, 96) p., Transfer 18 (20, 20, 22) central loops to the holder, attach another ball and finish the row.

Next, knit both sides at the same time from different balls. Bind off 4 sts on both sides of the neck in each even row 1 time, then 2 sts 1 time and 1 st 3 times. Then knit straight and at the same time finish the formation of the central triangle, when 11 stripes of the wrong side (2 out. Loops in each strip) are completed. Finish the front canvas at a height of 53 (55, 57, 59) cm in the wrong side. Cast off loosely (or slip onto scrap) remaining 80 (82:85:87) sts.

Completion.

Run WTO. From the wrong side, perform the shoulder seams of the sleeves (or close the loops of both parts with auxiliary threads with three knitting needles).

Neck trim.

From RS on short circular needles 4 mm, knit 28 (30, 30, 32) sts from back neck holder, then knit 5 sts along left back neck, then 22 (24, 24, 26) sts along left neck front, then work in rib 18 (20, 20, 22) sts from front neck holder, then pick up and knit 22 (24, 24, 26) sts along right front neckline, then 5 sts along right back neckline = 100 (108, 108, 116) p. Connect in a circle and knit as follows:

Only for size S: 1 out., * 2 persons., 2 out.; repeat until the last 3 loops of the circle, 2 persons., 1 out.

Only for sizes M and L: 2 out., * 2 persons., 2 out.; repeat from * to the last 2 loops of the circle, 2 persons.

Size XL only: K1, P2, *K2, P2; repeat from * to the last loop of the circle, 1 persons.

Knit 2 more rounds in this way and close the loops according to the pattern.

Cuffs.

From RS on needle size 4 mm, pick up and knit 48 (52:56:56) sts along edge of sleeve. Knit 19 cm with an elastic band 2 faces., 2 out. and close the loops according to the pattern in the front row.

Run the side seams and the seams of the sleeves with cuffs.

Based on the description of the pullover, you can knit a sleeveless jacket by adding fewer loops for the sleeves.

Note! The rules of the Domosedka club prohibit the placement of site materials on third-party resources in their entirety. Only the announcement (short description), photo and direct link to the source is allowed. For personal use, you can print any page. Top seal sign.

The material was prepared and retold from English by Homebody.

Tags:

The bat jacket differs from other types of products in a free cut in the armpit area. There is no need to knit an armhole for the sleeve, there is no seam on the shoulder, the sleeve is wide, free, does not fit. In the armpit area, when the arm is lowered, a soft falling fold is formed. When the hand is raised, the fold flattens out, resembling a bat's wing in flight.

Features knitting sleeves "bat"

You should start knitting the sleeve of the sweater with knitting needles immediately from the elastic band, making increases through an equal number of rows to the cuff. With a rapid increase, after two or three rows of 2 loops, “the wing of the bat comes out large, diagonally departs from the armhole to the length of the arm to the elbow. When the increase is done a little, after 5-8 rows of 2 loops, the bevel angle of the “bat” will come out steeper, and the sleeve itself will be less wide.

The number of loops with an increase may be different. You should be guided by the principle: the thinner the thread, the more loops are increased in one row. When knitting a sweater with a thick thread, the increase should be done carefully, in this case each loop will occupy an area from 1 cm to 2, so the increase occurs with angular protrusions along the edge of the knitted fabric.

Important! The steeper the bevel of the corner in the batwing sleeve, the wider the cuffs and bottom of the jacket should be made. In this case, the product looks beautiful, without rough breaks "from the wing to the cuff."

What not to do! When knitting a bat sweater model, it is undesirable to knit tight cuffs with a narrow wing. This version of the bevel angle makes the image of a woman strange. She has only the armpit area hanging, in the fold itself, which resembles a thinner person with saggy skin.

The sleeve of the "half-bat" sweater is knitted along a different bevel line. It differs from the original in that it has a small wing span in the armpit area, does not fall below the chest line, and has smooth transition lines from cuffs to expansion. Also, this model has a bevel with a notch towards the shoulder on the inside, reminiscent of a parabola.

On a note: patterns of sweaters "bat" are diverse, but having one common detail - the angle of the bevel "under the wing" is made straight, there should not be protrusions outward, as in a poncho, or inward, as in a parabolic line.


Ways to knit sweaters "bat"

  1. One-piece on the side, knitting goes from sleeve to sleeve, in the center an armhole is made for the head according to all the rules;
  2. One-piece bottom, where knitting goes from the bottom of the front to the shoulders with the transition to the back, completing the bottom of the back. In the course of knitting, an opening is made for the head;
  3. Two halves, front and back. The halves are the same size, knit identically, with an equal number of loops in the set, and an equal number of rows to the shoulder;
  4. Raglan in a circle, suitable for any skill level of needlewomen, as it is simply knitted in a circle, with an armhole for the head, separately knitted cuffs are attached at the exit points of the brushes, an elastic band connecting the front and back of the product is attached at the bottom.

The sequence of knitting sweaters "bat" with knitting needles in a single pattern. Plan view from above.


Description

A set of loops with the calculation of the width of the sleeve, starting after the cuff. Usually they make the set one and a half times wider than the cuff itself, this gives more spice to the wing. Having connected the first 4-6 rows, they immediately proceed to increase the sleeve on the side, adding loops next to the hem. The number of loops added on each side of the sleeve is the same. They increased the sleeves on one side, added 2 loops, then from the other end of the row they also add 2 loops.

The calculation of the number of added loops per row is based on the density of knitting. Before work, a sample is made, the width and height of the loop are measured from it, the increase is calculated from the landmark - each centimeter upwards, the wing also goes 1 cm to the side.

When increasing, it is necessary to try not to make protrusions or corners, they will interfere with assembling the canvas without rough convex lumps, along the inside of the seam. Also, the corners, when enlarged, create an extra canvas, which, in the process of being worn under its own weight, will begin to stretch, as a result of which the wing begins to hang, and not always evenly, sometimes in waves.

In order for the “bat” wing not to sag while wearing the product, an increase is made through the transition from one row to another with a pigtail (the last loop is always made in the form of a pigtail). The extreme loop is knitted through the row, if you knit it both at the end and at the beginning of the row, then the edge will stretch out, go in a wave.

The increase in sleeves is completed when they approached the front of the jacket. Next, the fabric is knitted evenly, without increments at the edges. Having reached the neckline, the fabric is knitted from two skeins. The opening is larger in the front, smaller in the back. Having connected the neckline, the fabric is connected and one skein is used again.

After the neckline is ready, the fabric is tied evenly, until the beginning of the next sleeve. Then there are decreases in mirror image. This should be understood as follows: it is necessary to reduce in the reverse order from how the increases went. If 2 loops were added in the first row, then the same two loops will need to be reduced in the last row.

[Total Votes: 1 Average: 5/5]