Knit a vest for men with knitting needles for beginners. Men's vests with knitting needles with diagrams and descriptions. Men's vest: detailed video master class

08.05.2015

Men's dark gray noble vest with knitting needles

Knitted model of a classic men's vest is made of dark gray yarn in a business style. In such a sleeveless jacket with a beautiful embossed braid pattern, a man will be simply irresistible. A 100% wool composition will not let you freeze on a cool evening.
Size:
44-46 (48-50) 52-54 (56-58) - Russian;
XXS-XS (S-M) L-XL (XXL-XXXL) - international;
38-40 (42-44) 46-48 (50-52) - European.
Measurements:
chest girth - 88-92 (96-100) 104-108 (112-116) cm;
waist circumference - 70-76 (82-88) 94-100 (104-108) cm;
hip circumference ‒ 92-96 (100-104) 108-112 (116-120) cm.
Required: 500 (550) 650 (700) g dark gray yarn (100% wool, 125 m / 50 g); straight knitting needles No. 3.5 and No. 4; circular knitting needles No. 3.5.
Knitting density: 36 sts and 32 rows = 10 x 10 cm.
Abbreviations:
n. = loop, loops;
persons. = front (loop);
out. = purl (loop);
auxiliary = auxiliary (spoke).
Elastic band 2x2: in the front rows knit alternately 2 persons. and 2 out.; in the purl rows, knit loops according to the pattern.
Facial surface: front rows - persons. loops; purl rows - out. loops.
Braid pattern: knit by scheme A And scheme B.
Attention! When making armholes and necklines, knit loops stockinette stitch, if their number is not enough to perform the "braid" crossing.

Back

On knitting needles No. 3.5, dial 162 (186) 210 (234) p. And knit 3 cm rubber band 2x2, starting from 2 out.
Next, switch to needles number 4 and knit braid pattern, distributing the loops in the following order: 2 (0) 2 (0) out., last 14 p. scheme A x 0 (1) 0 (1) times, 24 p. scheme A x 3 (3) 4 (4) times, 14 p. scheme B, 2 out., 24 p. scheme A x 3 (3) 4 (4) times, the first 12 p. scheme A x 0 (1) 0 (1) times.
At a height of 39 (39.5) 41 (42.5) cm from the typesetting edge, close for armholes on both sides, 7 (9) 11 (13) p., then in each 2nd row, subtract 16 (18) 18 (22) times 1 p. = 116 (132) 152 (164) p.
At a height of 21.5 (23) 23.5 (24) cm from the beginning of the armhole, close for neckline medium 36 (42) 46 (50) p. and on both sides of them, reduce in each 2nd row 1 time for 4 (5) 5 (5) p. and 2 times for 4 p.
At the same time at the same height 21.5 (23) 23.5 (24) cm from the beginning of the armhole for shoulder bevels close on both sides in each 2nd row: 4 times 7 (8) 10 (11) p.
At a total height of 63 (65) 67 (69) cm, all loops must be closed.

Before

Knit as a detail of the back, only with a V-shaped neckline. To do this, at a height of 37 (38) 38.5 (39) cm from the inlaid edge, remove 2 central loops on a pin and on both sides of them close in each 2nd row 24 (30) 33 (36) times 1 p. and in each 4th row 5 (3) 2 (1) times 1 p.
At a height of 60.5 (62.5) 64.5 (66.5) cm from the typesetting edge, reduce for the shoulder bevels, as on the back.
At a total height of 61 (63.5) 64.5 (65.5) cm, all loops must be closed.

Assembly

Moisten the finished parts, straighten them and let them dry.
Run shoulder seams.
For neck strap on the front side of the edge of the cutout on circular knitting needles, raise, starting from the left shoulder seam: 70 (74) 74 (78) p. on the left side of the front neckline, 2 center. p. from a pin, 70 (74) 74 (78) p. on the right side of the front neck, 50 (54) 58 (62) p. along the neck of the back = 192 (204) 208 (220) p. Close the loops in a circle, outline 2 sts of the V-neck cape, which are knitted stockinette stitch, the remaining loops are rubber band 2x2, decreasing on both sides of the cape 1 st in each row, including the row in which the loops will be closed. Knit 2.5 cm and cast off.
For armhole slats on the front side of each edge on knitting needles No. 3.5, pick up 150-158-158-166 p., knit 2.5 cm rubber band 2x2, starting with 2 out., then close the loops.
Sew the side seams, including the sides of the slats of the armholes.
Advice☞ The connection of knitted parts of the product is preferably done with a knitted seam.

Pattern schemes

Pattern

Vests have been an integral part of the men's wardrobe for more than 200 years. During this period, they have become very diverse - from strict classic to sports, knitwear, youth models. Vests go well with suit pants, jeans, even shorts.

It is not difficult to knit a men's vest with the knitting needles of the scheme and the description of which are presented in this article. We invite you to choose the appropriate version of the vest for men and get to work.

Classic

Size - M

For work you will need:

p / w yarn - 480g;
straight knitting needles No. 4 and No. 4.5;
pin;
needle with a large eye.

Patterns used:

elastic band 1 person x 1 life;
front surface: with direct / reverse knitting - in odd rows, all loops are facial, in even - purl;
pattern "fantasy" - see diagrams

Knitting density: on face patterns. satin stitch and plaits: 21p. corresponds to 10 cm.

Description

A knitted vest for men consists of only two parts: a back and a front. They are made according to the same patterns, with a slight difference in the neckline.

Back

With knitting needles No. 4 we collect 100p. and we knit with an elastic band 7 cm. We pass to sp. No. 4.5, adding in the wrong side of the river. 7p. We get 107p in work. We begin to knit the fantasy pattern from the diagram above.

Having knitted 32 cm of the height of the sleeveless jacket for men from the last row of elastic, to decorate the armhole, we close on both sides in even rows 1 time 4p, 1 time 3p., 1 time 2p., 2 times 1p.

At a total height of a men's sleeveless jacket of 67 cm, we close 23 stitches for each of the shoulders, and 39 stitches for the neck.

Before

We knit with needles like a back. Having knitted 32 cm - see diagrams, for the armhole we close in even p. symmetrically on both sides 1 time 5p., 1p. 3p., 1p. 2p. 1r. 1p.

Having knitted from the beginning of the armhole of a sleeveless jacket for men 6 cm, we divide the work into two parts - to design the neckline. At the same time, we remove the central loop on a pin.

At a total sleeve height of 67 cm, we close both knitted parts of the front. On each of them we have 23 stitches for the shoulder.

Assembly

Sew one shoulder seam. According to the neckline of the men's sleeveless jacket on sp. No. 4 pick up 133 loops, including the loop from the pin.

Knit further with an elastic band, calculating the location of the loops so that the middle point (the one from the pin) is front. On both sides of it we make reductions: in faces. rows - 2p. in 1 out., and in the wrong rows - 2p each. in 1 person. Having knitted 7 rows, we close the loops according to the pattern.

Carefully sew the second shoulder, aligning the elastic pattern on the neckline strapping. Next, we tie the armhole. We raise to sp. No. 4 along its edge 122p., We knit 7r. elastic bands, close the item according to the pattern.

We sew the sides. If desired, the binding of the collar and armholes can be done on circular knitting needles. To do this, first we sew both shoulders. Then we collect loops along the edge of the cutout and knit an elastic band - see the description above. It is the same with armholes - first sew the sides, then lift the loops along the edge, tie.

Ready knitted men's vest must be slightly steamed to give shape.

Men's vest: detailed video master class

Men's round collar vest

This simple vest is very easy to make. Spectacular diagonal stripes are played up by alternating front and back loops.

The model is designed for several sizes - XS (S, M, L, XL, XXL).

Breast volume - 81.5 (91.5; 101.5; 112; 122; 132) cm.

Length - 59 (60.5; 63; 66.5; 69; 72) cm.

For work you will need:

b / w yarn (100g per 110m) - 500 (500; 500; 600; 600; 700) g;
circular sp. No. 5;
direct sp. No. 5 and No. 6;
markers.

Patterns used:

elastic band 1 person x 1 life;
diagonal pattern:

1r.: * 4l., 4i. * - repeat from * to * for the entire row;

2p.: 1i., * 4l., 4i. * - to the extreme 3p., 3i.;

3r.: 2l., * 4i., 4l. * - to the extreme 2p., 2l.;

4p.: 3i., * 4i., 4l. * - to the extreme 1p., 1i.;

5r.: * 4i., 4l. * - to the end;

6r.: 1l., * 4i., 4l. * - to the extreme 3p., 3l.;

7p .: 2i., * 4l., 4i. * - to the extreme 2p., 2i .;

8r.: 3l., * 4i., 4l. * - to the extreme 1p., 1l.

We repeat from the 1st to the 8th p.

Description of knitting sleeveless jackets for men

Back

With knitting needles No. 5 we collect 64 (72; 80; 86; 88; 96) p. Tie 12r. rubber bands (this is approximately 6.5 cm). Change the needles to #6 and continue with the diagonal pattern from the diagram.

For each of the shoulders at a height of 39.5 (39.5; 40.5; 40.5; 42; 42) closed. 18(21; 23; 24; 25; 27) p. for the neck - 24 (24; 25; 26; 29; 30) p.

Before

We knit with knitting needles in the same way - see the description and back diagrams. Having connected 53 (54.5; 57; 57; 59.5; 59.5) cm, we divide the canvas into two parts: closed. in the center 8 (8; 9; 8; 11; 10) p. and we knit each of the parts further separately.

For a cutout, double close. by 2p. Then - subtract 1p. in even r. 4(4; 4; 5; 5; 6) times. We continue with the pattern to the desired height. We close the loops on the shoulders.

Assembly

We carry out shoulder seams. On circular sp. No. 5 we raise along the cutout 62 (62; 60; 64; 70; 74) p. Having knitted 2.5 cm of rubber bands, we freely close the loops.

For armholes, we mark on the front and back with a marker 21.5 (23; 24; 25.5; 26.5) cm from the shoulder.

Cast on 66(69; 74; 82; 88; 92) sts. between the markers and knit with an elastic band 2.5 cm. We close the item. We do the same with the second armhole. We carry out side seams.

Classic men's vest: video MK

There are a lot of models of men's sweaters that are very easy and simple to knit. Although knitting a sweater is a voluminous work, it will not only always warm you in the winter, cold season, but will also become the main decoration of your wardrobe.

option 1

This option is very good because it is easy and simple to knit. Here is a simple pattern, and you can also pick up absolutely any thread for knitting this product.

option 2

In this version, a rather complex pattern, but interesting. This type of vest is also ideal if you combine a men's vest with a shirt, turtleneck and even a sweater. Any yarn can be used for knitting. Also, the model will look good in any color shades.

option 3

Quite a stylish look of the vest, which can be worn under a tie and even under a bow tie. It is impossible to freeze in such a vest, as it is knitted from thick woolen yarn. In this option, you can choose any color, the picture in any color will look beautiful and original.

option 4

This vest has an original pattern that is very easy to knit. Any thread for knitting this vest can be used, but preferably not too thin, Turkish types of threads, such as Yarnart or Gazal, are perfect.

option 5

A great option for a button-down vest that will go with any outfit. The only thing when knitting will be a little difficult for beginners, since the pattern is complex. But when knitting, you can use any other pattern, not necessarily this one, or just knit with front stitch, which will also look quite attractive.

Men's knitted vest with knitting needles diagram with a description

We offer a simple but interesting version of a knitted vest, which is very easy and simple to knit. The vest has a beautiful pattern, which is also quite easy to knit.

To knit this vest model you will need:

- 7 skeins of thread (in this version, Gazal baby coton thread, 50 g was used);

- circular knitting needles% 3.5 by 180 cm.

This vest is knitted in the round. In this option, you do not need to separately knit the back and the front part, everything is knitted together in a circle. On the front side there will be a pattern, on the back we will knit with the front surface. Vest size 43-45.

Diagram of the drawing.

Only even rows (2, 4, 6, etc.) are not indicated on the diagram, since they are repeated. You should knit the first row, as in the diagram, and repeat the second according to the drawing, and so on. The pattern is very easy to knit. Where marked with dots, these are purl loops, where there are no dots - front loops.

Step-by-step instruction:

We collect 296 loops on the knitting needles and close them in a circle.
We knit with an elastic band 2x2 (report 4 loops). We knit 4-5 cm.
We distribute the typed loops across the floors. The back part is obtained - 148 loops, the front part - 136 loops. On the sides we leave 6 loops. Half of the loops - this will be the back, we knit the back - with front loops, the second half - the front part, we knit according to the scheme.
The width of the elastic will be - 42 cm, where the pattern is 53 cm. Girth - 106 cm.
When the elastic is tied, we begin to knit the front part of the vest according to the scheme, and we also knit the back in a circle with facial loops.
The pattern report consists of seventeen loops. For beginners, it is recommended to wear a marker at the end of each report in order to make fewer errors and know when the report ended.
We knit like this 38 centimeters. You may need to knit more in height, it all depends on growth. When 38 cm is knitted, it is best to take measurements.

Then we begin to reduce and form the armhole.

Set aside twenty loops, which we will close for the armhole. For convenience, to know how many loops are closed and how many need to be closed, you can hang a marker. To do this, in the very first row on the front side, we decrease five loops, after which we knit according to the pattern. When we knit to the end, turn the knitting over and close five more loops on the reverse side. So we knit in reverse-turning rows.
In the second row we close - 3 loops, in the third again - 3 loops, in all remaining rows we close one loop each.
We don’t touch anything from the back side, we leave it alone for now and work only with the front part of the vest.
After the armhole is ready, we begin to form the neck. In this vest, it goes in a V-shape. You can also use the option of the neck in a circle.
In this example, the neck height is 19-20 cm. H 10 cm x 36 rows. We make a proportion: 19 * 36 / 10 and we get 68 rows. 68/20 and we get that in each row 3 loops should be reduced in every 8th row. Decrease is done with reverse-turning rows of 69 rows.
Starting from the 62nd row to the 69th, we begin to decrease by 8 loops.
On the 70th row we close the remaining loops.
When the neck is ready, we continue to knit the back of the front stitch.
We place the working canvas on the left side. And we begin to form armholes, according to the indicated pattern. The armhole is formed in the same way as on the front moan.

1) -5	2) — 3	3) — 3	4) -2
5) — 2	6) -2	7) -1	8) — 1
9) -2	10) -2	11) -1	12) -1
13) -1	14) -1	15) -1	16) -1
17) -1	18) -2	19) -2	20) -2
21) -1	22) -1	23) -1	24) -1

We form an armhole from the left and right. Decrease occurs in 26 rows:
We start decreasing for the neck from the back. The reduction occurs in the same way as on the front of the vest. We knit straight to the 60th row, make a neckline and continue to decrease to the 69th row. The shoulder should be oblique.

We make such reductions in this way:

61) - 30; 62) From the wrong side - 8, after closed loops close 3 loops; and in the following rows the loops are closed in the same order 63) - 8, - 3. 64) - 8, -3; 65) - 8, -1 66) - 8, -1; 67) - 8; - 1 68) - 10, 16; 9) - 10.

We process the shoulder seams and sew them.
We process the armhole. We collect on the sleeves - 160 loops. On the neck - 124 loops. And we knit with an elastic band 2 x 2. We do it with sleeves and a neck. We knit with an elastic band 7 rows.
We close the loops, hide the tips and the product is ready!

Neck processing in a men's knitted vest

V-neck processing

Before you form the neck, you should initially select the desired height for the neck. It can be a deep V-shaped neckline or closing loops for the neck in a circle. In such cases, the finished product is applied to another thing, for example, to a T-shirt, and it is measured at what distance the neck will begin.

Initially, you need to finish the left side of the work. To do this, in every third row, the 2nd and 3rd loops should be knitted with pulling.
On the right side, knit the last two loops together for the bevel.
To form the strap, they pick up the edge and the loops for the strapping also begin to pick up from the left side.

round neck processing

To knit a round neck, it is important that all its edges are smooth and round.
After the knitted parts are processed, it is necessary to type loops on the knitting needles corresponding to the length of the neck. You can dial through one loop, not necessarily in a row (there will be no holes).
Knit with an elastic band 2 x 2 approximately 7 cm. The number of loops should be a multiple of 4.
After knitting, close the loops, hide the thread.

Men's knitted vest pattern

There are a large number of options for patterns of knitted men's vests, we offer interesting and simple options.

option 1

option 2

option 3

Men's knitted vests with buttons, diagrams with descriptions

option 1

option 2

Knitting a hood is not so difficult. It can be knitted separately, and then attached to a vest or started knitting after the main part of the work is ready. The hood can be knitted in several ways: according to the principle of knitting the heel, as well as dividing it into left and right parts (the second option is convenient for knitting hoods with patterns).

This version of the vest can be supplemented with a scarf of the same color, as well as knitting an original men's hat and gloves.

This article contains various descriptions and schemes of men's sleeveless jackets, and each man will be able to choose an interesting model for himself that will emphasize his dignity. But still, it is worth choosing the option that will not only show you from the best side, but also the one that will be convenient and practical. In our article you will find all the necessary information on creating men's stylish knitted sleeveless jackets, and interesting diagrams and descriptions will help with this!

We knit a men's sleeveless jacket with knitting needles with a neckline with patterns

Size: 48 (50/52) 54/56

Materials needed: 450 (450) 500 g of melange denim thread, straight knitting needles numbered 2.5-3.5 and 3-4, circular knitting needles numbered 2.5-3.5 - their length is 40 and 80 cm.

Rib 1x1: knit, purl, so to the end of the row.

Pattern: it is necessary to knit according to the scheme, it shows the front and back rows. Facial - from right to left, and purl vice versa. You need to repeat from the first to 10 rows.

The density of the fabric, when knitting with knitting needles at number 3-4, with the main pattern: 26 loops x 36 rows = 10x10 cm.

Back: on knitting needles numbered 2.5-3.5, you need to dial 136 (148) 160 loops with a thread and knit with an elastic band 5 cm 1x1. Knitting should be continued from the wrong side and in the last row add one loop after the hem, the total will be 137 (149) 161 loops. Then knit with knitting needles numbered 3-4 with the main pattern, while repeating the 81st row after the edge loop of the rapport, finishing, as in the figure, with edge stitches.

At a height of 37 (35) 33 cm, which will be 134 (126) 118 rows from the strap, you need to close on both sides for armholes 5 loops and in every second two times two and 4 times one, this will be 111 (123) 135 loops .

At a height of 59 cm or 212, close the row from the plank on both sides so that shoulder bevels form once 5 (6) 6 loops and in every second row 4 times 5 and 2 times 4 (3x6 and 3x5) 3x6 and 3x7 loops .

At the same time, during the third decrease for the bevels of the shoulder, close 35 loops for the neck in the middle, knit two sides separately and in each second row close 3 loops once and 2 times one at a time. Close the loops at a height of 67 cm.

Before: knit similarly to the back, for the neck you need to close 15 loops on the 188th row from the bar in the middle and knit each separately, while in each second row close 3 loops once and 4 times two loops. Finish at a canvas height of 67 cm.

Assembly: make seams on the shoulders and sides. On circular knitting needles with a length of 40 cm, dial 126 loops along the neck of the knitting needles, 122 (130) 138 loops along the armholes and knit 3 cm with an elastic band 1x1, then close all the loops.

We create a do-it-yourself vest with a zipper with welt pockets

This vest is suitable for men who have a collar size of 54.

Materials: thin blue acrylic yarn - 500 g, burgundy thread - 100 g, zipper, length 70 cm, color blue, knitting needles number 4 and 4.5.

Elastic band 1x1: front, purl loops, and purl rows knit according to the pattern.

Front surface - front side - front loops, purl rows - purl loops.

The edge, which consists of 2 loops: the first two loops are knitted with the front surface - the front rows are the front loops, and the wrong rows are the wrong loops.

Density: 16 loops x 23 rows = 10x10 cm.

Back: with a burgundy thread on the knitting needles at number 4, dial 92 loops and knit a 4 cm elastic band. Next, knit with knitting needles at number 4.5 with the front surface of the blue thread. When the height of the canvas is 40 cm from the elastic for armholes, you need to close 3 loops on each side, and in every second row 2 times 2 loops and 1 loop. From the beginning of the armhole, after 23 cm close the middle 18 loops for the neck, and in two different parts close 4 and 3 loops in every second row.

When the canvas is 70 cm high, then you need to cast off 22 loops for each shoulder and finish knitting.

Right shelf: for the burlap pocket with a blue thread, dial 21 loops and knit with front stitch.

When the canvas is 10 cm high, put it aside. Take a burgundy thread and knitting needles floor number 4, cast on 46 loops and knit 4 cm of 1x1 elastic, while making an edge of 2 loops from the side of the zipper.

With a work height of 13 cm, to enter the pocket on the front side of the fabric, knit only 17 loops, remove 21 loops on an additional knitting needle, while replacing them with pocket burlap loops, and knit those 8 loops that remain.

At a height of 40 cm from the beginning of knitting, close the slit for the hand from the side of the seam 3 loops, and in every second row close twice one loop.

From the beginning of the armhole at a height of 16 cm close 5 loops for the neck, and in every second row 3 loops, 3 times 2 loops and 2 times one.
when the height of the product is 70 cm, you need to close 22 loops for the shoulder, finish all knitting. And the left shelf is knitted similarly to the right one.

Assembly: sew shoulder seams. On the edge of the neck with knitting needles number 4 with a burgundy thread, collect all the loops, knit 12 cm with an elastic band 1x1 and close them according to the pattern. In the same way, process the armholes, only the height of the elastic will be 3 cm.

For pocket flaps on knitting needles number 4 with a burgundy thread, remove the loops from the additional knitting needle 21 loops, knit 3 cm with an elastic band 1x1, close according to the pattern.

Sew in the zipper and make the side seams.

Knitting sleeveless jackets for men on knitting needles brings pleasure not only to women, but also flatters the men themselves, because they are pleased when something is done for them.

There is also this interesting model:

Watch the video on the topic of the article

We knit a men's sleeveless jacket with knitting needles with a neckline with patterns

Size: 48 (50/52) 54/56

Materials needed: 450 (450) 500 g of melange denim thread, straight knitting needles numbered 2.5-3.5 and 3-4, circular knitting needles numbered 2.5-3.5 - their length is 40 and 80 cm.

Rib 1x1: knit, purl, so to the end of the row.

Pattern: it is necessary to knit according to the scheme, it shows the front and back rows. Facial - from right to left, and purl vice versa. You need to repeat from the first to 10 rows.

The density of the fabric, when knitting with knitting needles at number 3-4, with the main pattern: 26 loops x 36 rows = 10x10 cm.

We create a do-it-yourself vest with a zipper with welt pockets

This vest is suitable for men who have a collar size of 54.

Materials: thin blue acrylic yarn - 500 g, burgundy thread - 100 g, zipper, length 70 cm, color blue, knitting needles number 4 and 4.5.

Elastic band 1x1: front, purl loops, and purl rows knit according to the pattern.

Front surface - front side - front loops, purl rows - purl loops.

The edge, which consists of 2 loops: the first two loops are knitted with the front surface - the front rows are the front loops, and the wrong rows are the wrong loops.

Density: 16 loops x 23 rows = 10x10 cm.

When the canvas is 70 cm high, then you need to cast off 22 loops for each shoulder and finish knitting.

Right shelf: for the burlap pocket with a blue thread, dial 21 loops and knit with front stitch.

At a height of 40 cm from the beginning of knitting, close the slit for the hand from the side of the seam 3 loops, and in every second row close twice one loop.

Sew in the zipper and make the side seams.

Knitting sleeveless jackets for men on knitting needles brings pleasure not only to women, but also flatters the men themselves, because they are pleased when something is done for them.

There is also this interesting model: