How to sew a beach bag out of fabric - patterns. We sew a beach bag with our own hands Beach bag rug pattern

  • Old jeans (best straight cut, large size, soft jeans);
  • Lining fabric;
  • "Magic" tailor's chalk;
  • Needle and thread for sewing;

How to make a beach bag from old jeans

Step 1

On the bottom of the jeans, measure the width of the leg.

Step 2

Move the ruler up until the leg width changes. Stop at this place.

Make a mark with tailor's chalk.

Step 3

Draw a straight line across the leg.

Step 4

Cut off the legs along the marked line.

Step 5

Turn the cut-off legs inside out.

Step 6

Cut off the hem allowance and cut the leg along the seam. Leave the seam as is.

Step 7

Use a tailor's ruler and chalk to line up the pieces. These will be the main parts of the bag. In this case, they turned out to be of the following sizes: Width - 48 cm; Length (height) - 43 cm.

Step 8

According to these measurements, cut out 2 side pieces 43 cm long and 14 cm wide and a beach bag bottom piece - 48 cm long and 14 cm wide.

Step 9

We will need one more additional detail, which will act as a pocket for bottled water. Its dimensions are 43 cm long and 22 cm wide, including allowances.

Step 10

From the lining fabric, cut out all the parts of the bag, except for the part from step 9.

Step 11

Stitch the side parts to the parts of the bag along the longitudinal sections with allowances 1 cm wide.


Turn the seam allowances onto the side parts of the bag and set aside.

Turn out the bag.

Step 12



Stitch the bottom to the details of the bag along the long sections.


Cut the allowances along the lower cuts of the side parts of the bag exactly at the seams to a length of 1 cm. Cut off the short cuts of the bottom of the bag with the side parts of the bag.

Sew by starting/ending stitches exactly at the corners.

Turn out the bag.

Step 13

Sew a pocket from old jeans to the part of the lining fabric bag.

Step 14

On the additional part from step 9, turn the allowances for short sections to the wrong side and iron. Once again, turn the allowances to the wrong side and iron.

Sew off.

Step 15

Insert an additional part between the main and side parts of the bag, pin and stitch.

Turn the side part of the lining up.

Fold the extra piece in half, aligning the long edge with the opposite edge of the lining side piece.

Put the lining part of the bag on the side part, chip off and stitch. Next, sew the lining for the beach bag from old jeans in the same way and in the same sequence as the main parts.

Step 16

From the remnants of denim or lining fabric, cut out 2 pieces of handles 63 cm long and 10 cm wide, taking into account allowances of 1 cm. Turn the allowances for long sections to the wrong side and iron. Fold the handle parts in half lengthwise wrong side inward and iron. Sew the handles to the edge on both sides. The size of the handles in finished form is 63x4 cm.

In this master class, handles are made and belts from old jeans.

Step 17

Pin the handles to the main part of the bag on the front side, at a distance of 13 cm from the center line of the front / back side of the bag.

Step 18

Place the bag inside the lining, right side to the front. Peel off the top edges.

Sew with an allowance of 2.5 cm, leaving a small opening for eversion.

Turn the bag right side out through the opening.

Sew the bag along the top edge with a slight roll to the wrong side.


Ready!

Large beach bag made from old jeans.

For the first model you will need:

  • the main material is 70x140 cm in size (we have a cotton fabric with black and white stripes);
  • lining material (we have pink crepe satin). The size is the same;
  • synthetic winterizer for laying;
  • rep tape;
  • "zipper" for pockets (if you plan to make them);
  • elastic band (it is better to take a width of 1.5 cm).

Do not forget about scissors, thread, pattern paper, crayon, ruler, pencil, safety pins. Clean and dry your sewing machine before starting work.

A synthetic winterizer is needed for laying, because we will sew a pillow bag. You will appreciate its advantages over the usual "sack" as soon as you get to the pebble beach.
Sewing in a synthetic winterizer will make the sewing process just a few minutes longer, but the finished product will be more functional.

Pattern

You can immediately cut out the details on the fabric by drawing it with a ruler and chalk into pieces of the desired size. But it is better to use the good old method - a paper pattern.


Detail dimensions:

1) Front and back of the bag(2 pieces), 36x40 (height * width) or one with a fold - 72x40 (length * width).

Here you need to add 5 cm in width on each side - for the side parts, so as not to cut a separate part. Thus, you will get either 2 rectangles 46x40 cm, or one rectangle 82x40 cm.

2) Bottom- rectangle 36x9 cm.

3) Pens- 100x2 cm (length * width). This is conditional, you can make handles of any length and width, to your taste.

Don't forget about seam allowances when cutting fabric pieces.. Leave 1.5 cm for them on each side.
We cut out all the details, except for the handles, the same, both from the main and from the lining fabric. The synthetic winterizer does not need to be cut.

Instructions (steps in the photo)

We duplicate the front and back sides of the bag with synthetic winterizer. We do the same with the bottom. To do this, you must first pin the part to the padding polyester, and then stitch them together.

Do not forget to cut off the extra padding polyester from the allowances, you don’t need extra thickening.

  1. Sew the back and front sides together.
  2. All seams are ironed out.
  3. On the narrow side of the bottom, mark the middle and align it with the side seam of the bag (both sides).
  4. Stitch everything together, synthetic winterizer, if there is an extra one, cut it off.
  5. Iron the seams.
  6. Turn the material inside out - you should get a rectangular bag, as in the last picture.


You need to sew exactly the same bag from the lining fabric.

For pockets, you need to “by eye” cut out details of suitable sizes from the lining fabric. One pocket is usually fastened with a zipper, we have already provided for its presence.

Finish the edges of the pocket details so that they do not fray. Sew a “zipper” into one, baste them. Choose the location yourself, where it will be convenient for you. Sew the pockets to the inner "pouch" of the bag. Turn out, iron.

You can also add an elastic band that will act as a "holder" for combs, water, etc.

How will it look like.


Pens

We have indicated the conditional length of the handles, but you can choose the one that will be convenient for you - longer or shorter.

They are made simply.
We cut out strips of the desired length from the fabric, iron the allowances inward, chop off, tack, close the allowances, sewing a rep ribbon on them - the handles are ready.

We tuck the ends of the handles with the “square” sewing technique, attach them to the bag.


We put the inner “pouch” into the outer one - inside out to the wrong side, we chop together (look at the photo on the right), sew them together. We advise you to lay a double line along the edge of the bag - this will not allow it to “bubble”. In addition, the additional fastening of the lining has not bothered anyone yet.

You can decorate the product as you see fit. For example, we used a ribbon bow brooch, but there can be a great many options.

You saw the image of the resulting masterpiece at the very beginning of the article under the main heading.

How to sew from old jeans?

From old pants that are a pity to throw away, you can make many different useful gizmos. The simplest is shorts with your own hands. We are also interested in a summer denim bag, so let's get to work.

For the second model you need:

  • old jeans;
  • lining fabric;
  • "lightning";
  • rep tape;
  • pattern paper, ruler, pencil;
  • chalk, thread, needles;
  • decorations - sequins, buttons, beads, bows, applications, etc., to your taste.

Take care of the sewing machine before starting work: lubricate it, clean it, replace the needle in it, if necessary, with a thicker one suitable for denim.

Cutting denim

This model, like the previous one, consists of several parts:

1) Two halves - side and front- size 49x40x30 (bottom width * top width * height).

2) One piece for sides and bottom- a strip 90 cm long, 9 cm wide.

3) Pen 85 cm long, 4 cm wide. You can also lengthen or shorten the handle, as well as make three pieces - one long and 2 short ones.

4) Top of the bag, consisting of a denim ribbon - 2 strips 60 cm long, 3 cm wide.

When cutting out, do not forget about seam allowances - 1-1.5 cm. We advise you to iron the parts with steam after preparations, so that it is more convenient to work with them.

How to sew?

We start by attaching a "zipper" to the details of the top of the bag. Then they need to be sewn to the front and back.

The next step is to sew in the strip (sidewall + bottom). We iron the seams.

Let's move on to the handles.

You can choose any length, make one or more. In our case, it is one - 85 cm long and 4 cm wide.

We cut it out of the fabric, tuck it, iron it and sew it on. We put a rep tape on top of the sewn allowances, closing them. Sew the finished handle to the front and back of the bag.

Final stage

We cut out the lining in the same way as the outer part of the product. We sew the details, we tack to the top of the outer part.

It is better to sew the lining by hand, but you can also use a typewriter if the handles and clasp do not interfere with you.

You can see the finished version in the photo. We use decorations (beads, sequins, appliqués) according to our taste.

Carpet bag

The transformer is very convenient because it allows you to fit everything you need for a seaside holiday, as well as turn into a beach mat.

What you need for the third model:

  • bright cotton fabric;
  • waterproof material;
  • braid;
  • needles, threads, chalk, pattern paper, scissors, sewing machine;
  • for decoration it is better to use fabric applications.

Pattern and dimensions of parts

You need two pieces of fabric 160 cm long and 55 cm wide. Let one piece be from bright fabric, and the second from waterproof material - varnish.
Also stock up on 4 pieces of foam rubber measuring 50x39 cm, tape for handles and ties about 5 meters long and 5 cm wide.

You can do patch pockets, or you can not do it - at your discretion. We do not give patterns for them, since you will choose their size and shape yourself.

Guide to action

From the braid you need to cut 8 segments - 5 cm long. These are the future ties for the sidewalls.

Pockets

If you decide to make pockets, then sew them on the piece of fabric used for the front of the bag. Just make sure that they are not sewn onto the folds of the future bag.

The upper sections of the pockets can be processed with braid or simply seams "in the hem".

Ties

Sew them along the long edges of the "bright" part, attaching them from the wrong side. To properly attach them, fold the future bag along the folds, and sew on the ribbons at the top and bottom - opposite each other so that you can tie them together.

Almost done

Once the foam is in place, stitch the open cut. Don't forget to tuck the seam allowances inward. Lay a line between each piece of foam rubber so that they do not move and do not “run into” each other.

Pens

Process the ends of the remaining braid, tuck and sew to the top with a “square”. You can also make handles from the remnants of bright fabric for the front of the product. But in this case, they need to be sewn in immediately, along with ribbons for ties, on the wrong side of the “front” piece of fabric.

With the onset of the hot season, there is a need for a beach bag, which we offer to sew on your own. A master class will help you sew a beach bag with your own hands, in which, moreover, they are made of fabric.

The proposed version of the summer bag closes with a strap that contains a magnetic button. In addition, the bag has an inside pocket for small things.

Let's start the lesson, which will show how to sew a beach bag with your own hands, for which they are presented in the photo.

This shows that you need to cut out two pieces of the base color, two pieces of lining fabric, two pieces for the pocket and two pieces for the strap. Be sure to keep in mind that there will be seam allowances. It is also necessary to immediately connect two main parts with doubler.
Before sewing a beach bag, all details should be ironed well.
Pre-apply grooves in their places.

Marked grooves should be stitched.

The detail with grooves should be corrected, that is, cut off the excess and iron it.

The line for the pocket. We take the cut out parts of the pocket and fold them facing each other, stitch them and leave a small place for turning outward.

We turn out and iron with an iron.
The resulting pocket is now sewn to the lining of the future bag.

Let's move on to the inside of the bag. We take the details cut out in advance from the lining fabric (a pocket is already sewn on one), fold them facing each other and sew. Please note that an unstitched place remains at the bottom, this is for turning the entire bag inside out later.

When the lining part is sewn, we iron everything again and make notches in the rounded places of the bag.
Now the work will be with the main parts of the bag, in which we sewed grooves in advance.

These parts should also be folded facing each other and stitched around the perimeter, without touching the top edge.

The seams should then be ironed and the seal cut off.

Let's start cutting out the details of the handle. You will need the main fabric, lining and dublerin. From them we cut strips measuring 4x45 cm.

We put the part from the main fabric on the dublerin.

Each part should be ironed, while bending the edges of the long edge.

We attach both parts to each other and the cobweb glued between them.

We sew the handle around the perimeter, after which it turns out to be quite dense.

Now the finished handle can be sewn into place to the main parts of the bag.

Strap details. We also glue the main part with dublerin, connect it with the lining and stitch it.

The sealant from the seams also needs to be cut off.

After the strap is turned inside out, it should be ironed and stitched around the perimeter. Insert magnetic button.

Here's what happens on both sides.

We place the strap in its place and sew it on.

A beach bag is not only roomy and comfortable, but also a beautiful accessory. He can complement any image and emphasize the beauty of his mistress. It is not always on sale that you can find just such a thing that is ideal and will satisfy all requests. Therefore, we suggest that you try to sew a beach bag yourself or crochet it.

Bright summer bag. We prepare the necessary materials and tools

If you have at least minimal fabric skills and know how to handle a sewing machine, try creating a beach bag yourself.

First you need to decide on the material and style of the product. Any beach bag should be comfortable, durable, roomy, and, of course, beautiful. Therefore, the fabric must be selected sufficiently dense. For example, you can sew a beach bag from raincoat fabric, denim, tapestry, linen, felt or felt. As for the colors, it is advisable to use bright material without a catchy large pattern. To decorate a bag from the wrong side, you may need a piece. In addition to cuts of material, you will also need to make a bag:

  • scissors;
  • pencil;
  • pins;
  • ruler;
  • graph paper;
  • threads;
  • needles;
  • sewing machine.

To decorate the product, you need various decorative elements - straps, brooches, wooden beads, glass beads, pieces of leather and suede, flowers from satin ribbons, etc. If you plan to make a bag with a clasp, you will need a zipper, rivets or buttons.

How is a beach bag pattern made?

After acquiring all the necessary materials and tools, we get to work. The pattern is performed as follows. The contour of the details of the bag is taken on it. We advise beginner needlewomen to use the simplest option - draw a rectangle on paper with sides of 40 and 50 cm. This element will become the basis of our product. Now draw on paper strips about 7 or 8 cm wide and 120 cm long. These details will become the handles of our beach bag. Now you know how to create a rectangular beach bag pattern. As you can see, there is nothing complicated in this. However, if you find it difficult to draw the details of the product on paper yourself, you can use ready-made templates.

Transferring the pattern to the fabric

We cut out the details of our future bag from paper - a rectangle and long strips. Fold the fabric in half, right side inward. Now we apply our rectangular blank to it in such a way that one of its sides passes along the bend of the material. We attach the pattern to the fabric with pins. We circle with a pencil, not forgetting about the margins from the edge (2 cm) and cut out a rectangular pattern from the fabric. Next, we place long strips on the fabric, circle them, making the necessary indents, and cut out the blanks. Everything, the base of the bag and handles are ready. Next, we will tell you how to sew a beach bag.

We create a stylish accessory with our own hands

After cutting out the details from the fabric, we start sewing. Fold the main part of the bag in half with the front side inward. The fold of the material will become the bottom of the bag. Now we sew the sides of the product. We get a rectangular bag. Next, we overcast the internal seams and iron them. Then we make the handles of the product. We fold the blanks in half with the wrong side inward and tuck the edges. We sew the details along the edge of the edges folded together. We make a decorative stitch along the fold. We sew on the front side of the handle to the bag, combining their ends with the edges of the bag. After that, we wrap the upper edge of the bag (together with the sewn handle) inward, fold the edge and sew. If desired, we decorate the product with any decorative elements - beautiful buttons, straps, rhinestones, ribbons, braid. If necessary, sew on the outer pockets. Now you know how to make women's beach bags simple and easy. Good luck!

Another interesting idea is a denim accessory.

If you have old unwanted jeans, be sure to try to give them a second life by making an interesting beach bag out of them. You will get a unique stylish thing, spending a minimum of money and effort. In addition to old denim pants, you will need scissors, thread, a sewing machine, decorative patches, beads, buckles and ribbons.


Having prepared everything you need, get to work. Jeans beach bags are very easy to make. First you need to determine the depth of the product. If you want to sew a bag that is not too bulky, feel free to cut off both legs along the line passing just below the back pockets. Next, turn the workpiece inside out, and then sweep and grind the seam on a typewriter. The bottom of the bag is ready. Now turn the product inside out and sew a decorative stitch on the bottom seam on the front side. For this work, it is desirable to choose threads to match the denim.

Working with her beach is very simple!

Make the handle of the product from a long piece of denim. Cut a strip of the required length with a width of 7-8 cm. Fold it three times and sew along the entire length. Then sew the handle to the bag, placing the ends on opposite sides of the product. Here is such an original beach bag we got from old pants (photo).

Decorate the product as you wish with fringe, beads, beads and any other decorative elements. Such an exclusive beach bag will make your look more attractive and interesting!

Crochet a bag

A stylish beach accessory can not only be sewn, but also crocheted. It is especially simple and easy to do this by making several separate square motifs, and then joining them together and tying them with single crochets.

In order to make a capacious beach bag, you will need 300 g of yarn and hook number 4. Knitting threads can be purchased in different colors - then your bag will turn out to be brighter and more attractive. You will also need two braided straps for the handles and a large square button for embellishment. Our bag will consist of 24 square motifs. For beginners, we advise you to use the following simple scheme to make a bag.

Of course, you can use any other square motif you like. Beach bags made of more complex motifs look gentle and very romantic. So, let's look at how a crochet beach bag is made? First we knit the required number of squares. We perform the first and subsequent motives as follows: first we create four air loops and connect them into a ring using a connecting half-column. Next, we knit three VPs necessary for lifting. We carry out a column with one crochet (CH). Next, we knit two air loops and three CH. We repeat this pattern two more times. We complete the row with two air loops, one double crochet and a connecting loop. We will knit the second, third and fourth rows according to the scheme, all the time using only single crochet and air loops. As a result, you should get something like this.

By analogy with the first, it will be necessary to make 23 more of the same multi-colored squares.

We continue to crochet a beach accessory

After making all the squares, lay them out as shown in the figure.

We take yarn of a contrasting color and fasten all the details in turn with single crochets. As a result, you will get something like this.

We tie the edges of the bag with double crochets and attach strap handles. If desired, decorate the product with a bright large button. That's all, a bright and beautiful crochet beach bag is made. As you can see, making such an interesting and practical accessory is not difficult at all! The main thing is to devote enough time to work and stick to the proposed scheme.

Beach mat-bag

We bring to your attention another very convenient and spectacular model of a beach bag, which can serve not only as a container for things, but also as a comfortable rug. To make it, you will need to prepare beige yarn 225 m / 50 g and hook No. 2.5. You will also need a synthetic winterizer (45x65 cm), thick fabric and buttons - 6 pcs. Start work by creating 130 VPs. Work the first and subsequent rows with single crochets, remembering to make the necessary lifting loops. When the product reaches 40 cm in height, complete knitting. You will get a rectangular piece. Now tie the handles. To do this, perform 6 air loops. Work all rows in single crochet stitches, increasing 2 ch at the beginning of each row.

When the handle reaches a height of 60 cm, complete knitting, fasten and break the thread. By analogy, perform the second same part. Sew the handles to the rectangular blank from two sides. Cut pieces of synthetic winterizer and fabrics that fit the size of the knitted fabric. Put a synthetic winterizer on a rectangular blank first, and then the material, carefully sew them to the base. Now fold the bag in half. On one side, sew three buttons on each side, and on the other - loops from chains of air loops. For the manufacture of each chain, you need to dial about 35-40 VP. That's all, a gorgeous beach mat-bag is ready!

Instead of a conclusion

As you can see, making a modern, stylish and original accessory with your own hands is not at all difficult. The main thing is to get everything you need and devote some time to creativity. And the pattern of beach bags is quite simple. We hope that our advice, photos and detailed descriptions of the work will help you make a beautiful accessory that will definitely become the highlight of your wardrobe.

You can sew on your own not only clothes, but also accessories. A hand-sewn beach bag will exactly match the preferences and style of the owner and delight with original design and pleasant colors. You will be able to create a unique copy that differs from standard products. Making an accessory is within the power of even novice craftsmen. If desired, decorative fabrics can be used so that the product can be worn not only for relaxing by the water, but also during evening walks.

For a beach bag, durable and wear-resistant materials are best suited:

  • jute and burlap, dense "gunny";
  • durable cotton canvas and linen;
  • classic denim;
  • nylon, vinyl, other synthetic fabrics.

Sewing a beach bag with your own hands is actually not difficult. But you need to be aware of a few important conditions.

  • Do not save fabric - the product should be roomy, because beach accessories are voluminous.
  • Sew several pockets of different sizes and consider their location so that the product is convenient to use.
  • Choose fabrics with a dense texture that do not allow grains of sand to pass through and repel water - it is desirable that they be allowed to be washed in a machine.
  • If the fabric is thin, you can strengthen the product with a padding polyester lining or similar material.
  • Think décor - ruffles and cotton lace, appliqués, beaded handles or faux leather.

babyben.ru

Beach bags can be designed without a pattern. The drawing helps to make the process more visual and not make mistakes when working. For a traditional square or rectangular model, you will need parts for the front and back sides (or one, with a fold), as well as separate elements for the handles and bottom. When transferring details to the fabric, make allowances for seams - 1.5 centimeters each. You can immediately draw the details of the sides on the pattern, adding 5-10 cm to the sides, then they will not need to be additionally cut out and sewn.

How to sew a classic beach bag

To make a classic square model with two handles, you need about 1 meter of the main fabric, plus the same amount for the lining. You will also need 3-4 m of glue and thread (you can take contrasting ones for stitching). Before sewing a beach bag, you need to look at how the patterns and patterns are located on the main fabric in order to combine them or, if the image is large, place them in the center of the sides. A piece of matter is folded in half, two elements are cut off about 50x55 cm in size and two more - 5x55. For the lining, you will need three pairs of parts - 50-55 cm, 25-55 cm and 5x55 cm. Each element is reinforced with adhesive.

Progress

  1. Put the front side of the product (from the main fabric) face up and put the lining inside out, stepping back to the bottom 20-22 cm and pinning the details with pins.
  2. Repeat the same procedure with the back side.
  3. Sew the details on the machine, retreating from the edges about 1 centimeter.
  4. Iron the seams on the front side.
  5. Make a decorative contrast stitching on the front side of the details - at a distance of half a foot from the main seam.

you-freetime.ru

For the second half of the product, the sequence of actions is similar. Next, the two elements obtained are fastened with pins facing the inside and carefully stitched from the sides and along the bottom at a distance of about 1 centimeter from the edge. The lining parts are also fixed with the right side to each other and stitched. The seams need to be ironed both from the face and from the inside.

Progress

  1. Turn the fabric out of the corner along the outer part of the product - the side and bottom seams should overlap each other.
  2. Fasten the seams with a pin, draw a line perpendicular to them and emanating from the top - the longer it is, the more voluminous the handbag will be.
  3. Sew a line along the line, securing at both ends.
  4. Stitch the lining in the same way - not 4, but 8 cm should be retreated from the top.
  5. Cut the corners of the main and lining fabric, stepping back from the seams by 1 centimeter.

To make a handle (you will need two of them), you need to combine one part from the lining and one from the main one. They need to be fastened, stitched along two long sides and one of the short ones (about 7 mm recede from the edge). The fabric is then turned inside out and ironed. On the front side, you can lay a contrasting decorative stitch - it is sewn 5 mm from the edges. The lining fabric of the bag is turned inside out with the front surface inside and handles are put into it - the ends should be 15 cm from the sides, and 13-15 cm are left between the inner ends of the parts.

you-freetime.ru

The fastened main part of the product is placed inside the lining - so that the upper edges are connected evenly. They are first fastened with pins, and then sewn all over the top with an allowance of 1 centimeter. For additional strength, a few more lines are made in the most “vulnerable” places. It remains to unscrew the product through the hole left in the lining and close it. You can also add decorative stitching to the top.

How to sew a bag-mat

"Transformers", which are laid out from the bag into a beach litter, are very convenient. Even if you have little tailoring skills, you can sew it without difficulty.

Necessary materials

  • The main fabric for the top.
  • Waterproof lining.
  • Foam rubber - a layer for softness.
  • Band for handles, Velcro for fasteners, decor.

The pattern consists of two rectangles of the selected size. You can focus on the "dimensions" of your favorite beach towel.

Progress

  1. Cut out fabric pieces, leaving seam allowances.
  2. Cut foam tabs - with the same dimensions, but without allowances.
  3. Put the fabric wrong side up, sew on three sides and process the seams.
  4. Turn the fabric right side out, insert the foam rubber and make horizontal stitches along it in 15 cm increments so that the “pillow” does not move out.
  5. Sew open edge.
  6. Attach handles and Velcro.

babyben.ru

Economical denim

Old jeans are often used for sewing beach accessories - this allows you to get a beautiful bag at no extra cost. Denim - the fabric is dense, will withstand contact with both water and sand and will serve for a long time. You will also need a light lining, if necessary - a synthetic winterizer to stiffen, as well as a lock (zipper or Velcro). As a decor, you can use eyelets, stripes.

Having chosen the pattern you like, transfer the details to the material, leaving standard allowances. The elements are folded face inward, the sides are sewn to the bottom, leaving one side not fastened. You can make tucks - the fabric is pinched perpendicular to the seams and a line is made on a typewriter.

Progress

  1. Attach the synthetic winterizer from the wrong side.
  2. Sew lining.
  3. Turn the accessory face up, fasten separately cut pockets, appliqués, ruffles on it (it can be sewn to the upper cut).
  4. Insert a zipper or sew on Velcro.
  5. Connect the lining and the main part of the product.
  6. Attach handles from the inside - they can also be woven from denim (in the form of a twisted cord).

For the manufacture of denim bags, fabric is often taken from the trousers, and the handle is made from the belt. It remains to decorate the product with eyelets or other decor - and the beach accessory is ready.