Make your own leather bracelets. How to make leather bracelets with your own hands (MK and video). DIY leather bracelets

Bracelets are one of the most popular types of jewelry. Therefore, many fashionistas and fashionistas want to know how to make a leather bracelet. In order to please yourself or a friend with a stylish decoration, first of all, you should find suitable patterns.

These diagrams clearly show what the finished product will look like:

They also answer the question of how weaving occurs:

How to make a leather bracelet for men

Men's bracelets are most often woven from leather. They look elegant, courageous and even a little brutal. The jewelry you have woven will be the best gift for your loved one. And to make your work easy and enjoyable, below is a step-by-step master class on leather goods.

You will need:

1) A small piece of leather;

2) A set of buttons;

3) Set for inserting buttons:

4) Hammer and knife.

Sequencing:

1) Prepare a piece of leather, cut it to the desired shape according to the length of the wrist.

2) We secure with a pin the place where we want to make a button.

3) Remove the bracelet and lay it out.

4) Lay out the buttons and attachments on them.

5) In total, you will need four types of buttons with attachments.

6) We make punctures on the skin in the places where the pins were. You can use a gypsy needle.

7) Expand the hole. We insert the rod and hit it with a hammer.

8) You should get a hole like this.

9) We make the same hole on the other side.

10) We put the nozzles on the plastic plate.

11) Insert the button.

12) Insert the bottom part of the button. It requires other tools.

13) We put the attachments on the plate.

14) Insert the button like this.

15) It should turn out like this.

The bracelet is ready.

You can decorate the product with another button.

How to make a leather bracelet for women

Leather bracelets look very original on women's hands. They go well with jeans and sportswear. Women's jewelry is more elegant and sophisticated than that of men. They are usually thinner and more difficult to manufacture. Today we invite you to get acquainted with the weaving of a very simple and original women's leather bracelet.

You will need:

1) Thin belt.

2) Chain.

3) Scissors.

4) Hole puncher.

Sequencing:

1) Cut out two rectangles from the belt.

2) Cut out arrows from leather, using a template.

3) Make two holes in the arrow and stretch a chain through them.

4) Wrap the chain around your wrist and cut off the excess.

History of leather jewelry: myths and truth

Leather jewelry is easy to make and very durable. Your young man will be able to wear them for many years. And every time he puts on a bracelet, he will think about you.

Bracelets, both men's and women's, have a long history of existence. Even a thousand years ago, in the north of Russia, wrist jewelry was made from birch bark. And in distant southern states they made similar products from bird feathers.

Leather bracelets do not have such a deep and ancient history. However, their story can get a little scary if you consider one thing. Now in some countries of Africa, Australia and the distant lost islands of the Pacific Ocean, aborigines living in wild primitive tribes wear very strange bracelets.

These wrist ornaments are made from tanned animal skins, as well as the dried skin of enemies. It is a symbol of strength, power and victory.

Men's leather jewelry has a rich history; they trail behind them a trail of mystery, bloody battles and furious battles. Therefore, women consider them very beautiful and sexy.

Women rarely wear this kind of accessories. They are preferred mainly by ladies who dress in a sporty style. These beauties look very good in sports jackets, jeans and sneakers. And leather jewelry suits them surprisingly.

A selection of videos on the topic

In this master class, we have collected the best bracelets that can be made from leather. They will help complement the outfit and create a complete look.

Tools and materials Time: 1-2 hours Difficulty: 4/10

• artificial or genuine leather;
• buttons, rivets;
• hole puncher;
• pliers;
• scissors;
• hammer.

Simple leather bracelet with an unusual shape

This simple master class leather bracelet, which we will show below, is made quite quickly, and the result will exceed all your expectations.

We will need

1) A piece of leather

4) Hammer

Step by step master class

Step 1

Cutting out the base for the bracelet

This is the piece of leather we had from the very beginning:

Measuring the width of the wrist

Step 2

Cutting out the base:

Was:

Became:

Before you cut the leather, you should have a good idea of ​​what you want to achieve. We ended up with a base like this:

Step 3

Making notes for buttons

Our base is ready:

Now we apply the blank to the hand and insert a pin in the place where we want to make a button

You need to push the pin deep enough to make a mark on all the layers. Be careful not to puncture your hand.

We pull out the pin, remove the bracelet, lay it out on a flat surface, and insert the pins into the places with holes.

There will be buttons in these places.

Step 4

Preparing buttons and tools

We take our buttons and tools out of the packaging.

To work, we need 4 types of buttons and each of them must have its own attachment

The black circle is needed in order not to damage the surface on which we will place the buttons

A piece of rod will be needed to insert buttons

Step 5

Skin preparation

Now we will make holes for the buttons (if you have a hole punch, then everything will be much faster. Just punch holes in the places with pins)

Pull out the pins

Place a black circle under the hole

We insert a piece of the rod, the sharp end to the skin and hit it with a hammer

This is what the hole should look like:

We do the same on the other side

Step 6

Insert the top part of the button

Tools and materials for insertion:

We put the nozzles on the plastic plate

Ready! The top part is done.

Step 7

Insert the bottom part of the button

Each part of the buttons requires its own tool. For the lower part it is like this:

We put the nozzles on the plate

Now look carefully at the pictures and insert the button in the same way. Don't get confused

Here's what happens:

The bracelet is almost ready

Step 8

Decorating the bracelet

To make the bracelet more interesting, let's add another button.

Place the button at the desired distance (about 1-1.5 cm) and press it against the bracelet to leave a mark

Punch a through hole using a pin

We repeat steps 5 and 6 and get a super cool bracelet

This is how it will look on your hand:

Don't be afraid to get creative with your shape. Experiment!

Leather wrist bracelets for men

Bracelet from an old belt

Sooner or later, a leather belt will wear out. In order not to throw it away, we suggest you make a vintage bracelet.

We will need:

• Old leather belt
• Hammer
• Nail
• Scissors
• Pencil

How to do:

1. Wrap the belt around your wrist 3 times
2. We put a mark on the end after the 3rd time
3. Trim off excess with scissors
4. Using a nail and a hammer, make a hole so that the bracelet can be closed with a clasp.

All! Just a few minutes and the bracelet is ready!

But no, here’s another thing, such a bracelet can be made for a girl using her old belt

Creative bracelet with iron clasp

This creative leather bracelet is made quite quickly and is perfect for practicing the first steps in working with leather.

We will need:

• Metal clasp (you don’t have to use exactly the same one as ours, any one will do)
• Hole puncher
• Hammer or button inserter
• Rivets
• Scissors or breadboard knife
• Ruler
• Varnish (optional)
• Glue (optional)

How to make a leather bracelet for men with an iron clasp?

Step 1

Cut a strip of leather 5 cm larger than the wrist. The width should be 2 cm larger than the fastener. To do this we use a knife or scissors.

Step 2

We bend 2.5 cm of leather on each side (we cut off the excess, so we ended up with a larger fold). You can glue it, or you can leave it as is

Step 3

We wrap the wrist, attach the clasp and put marks on the place where it is attached

Step 4

Punch holes using a hole punch (as a last resort, you can use a knife) and insert rivets, driving them in with a hammer

*The main thing is to choose the required diameter of the rivets so that they are larger than the hole in the fastener

Step 5

We repeat the same thing on the other side.

Step 6

If desired, the bracelet can be varnished

Leather wrist bracelets for women

For arrow lovers, we made this bracelet.

We will need:

• Old leather belt (should be thin so that it can be cut with scissors)
• Chain
• Scissors
• Hole puncher

How to make a cute leather bracelet:

1) Cut out 2 rectangles from an old belt

2) Cut out arrows from leather (we didn’t use a template, but you can draw one and cut it out)

3) We make 2 holes on the arrows: one in front, the other in back. To do this we use a hole punch

4) Pull the chain through the holes

5) Wrap the chain around your wrist (if it is long, you can cut it with pliers)

We will need:

• Buttons
• Button inserts
• Hammer
• Scissors
• Paints

How to make a colorful bracelet with patterns

1-2) Cut out strips of leather 2.5 - 5 cm larger than the circumference of the wrist. Our width is 1.5 cm, you can make any other

3) Apply the first layer of paint in the form of geometric patterns. Let it dry

4) Apply a second coat of paint

This bracelet will be a great gift for your girlfriends! Be sure to do it :)

Bow bracelet

We will need:

• Piece of leather 22 x 10 cm
• Scissors
• Threads
• Buttons

How to do:

1) Cut out an oval piece of leather measuring 22 cm x 10 cm (yours may be different, depending on the width of your wrist)

2) Fold the skin in the middle as shown in the picture below

3) Wrap thread around the fold

4) Cut out a small piece of leather, approximately 4 cm x 1 cm

5) Glue a small leather rectangle on top of the threads

6) Using threads, sew buttons on opposite sides of the bracelet

Weaving leather bracelets

Weaving patterns for bracelets

Now we can look at an example of how to weave a leather bracelet:

Bracelet with carabiner

We will need:

• Leather or suede tape
• Scissors
• Pliers
• Tool for clamping (not only a specialized one, but a simple clothespin will also work)
• 2 clamps
• 2 rings
• Carbine

How to do:

1) Cut a piece of tape so that you can wrap your wrist 3-4 times (we cut it 4 times)

2) Cut 2 more pieces of the same length

3) Lay out the laces in a straight line, put on the clip and secure with pliers

4) Using a clamping tool, fix the laces and braid the braid (how to braid is up to you, everyone has their own method. You can see the basic diagrams just above)

5) We wrap our unfinished bracelet around the wrist, you should get 2 turns. We cut off the excess, leaving 1-1.5 cm

6) We put on the clip, as in point 3

7) Using our pliers, we put on the rings. We close one, leave the other ajar

8) We put on the carabiner and close the ring

If you did everything correctly, you will end up with a woven leather bracelet like this.

True, we already have 2 of these on hand :)

Don't be afraid to experiment: make a longer bracelet or make several of them, change the color of the leather or weave.

Several video tutorials on weaving bracelets

Why are these leather bracelets the best?

They are quite simple to implement. It took us more time to write the master class than to do the work itself.

They are durable. Bracelets made according to our MK will be worn for a very long time.

They are unisex. Although we've broken the bracelets down into categories, they're all really unisex. Even men's bracelets can be made from pink leather, then they will become women's :)

Similar content

.
We offer interesting master classes on creating unique bracelets from simple to more complex ones. It is not difficult to learn this craft.

Prepare a piece of leather belt that looks presentable (without scuffs or protruding threads). Before cutting off a segment, measure the width of your wrist, be sure to leave a small margin so that you can sew on a clasp.

Select several suitable beads to decorate your jewelry. It is better that the beads are flat, then the jewelry will be more comfortable to wear.

Carefully begin sewing decorative elements to the leather belt using a needle and thread of a suitable color.

Fill the entire space of the bracelet symmetrically with beads.

Buttons are used as clasps in factory leather bracelets. If there is no special riveter, then prepare regular sewing accessories. The wider the decoration, the more buttons it is better to use.

Using strong shoe thread, carefully sew the button elements to the ends of the bracelet.

This method will allow you to get an invisible fastener. But a button or clasp from old jewelry is also suitable as a fastener.

As you can see, you can make a leather bracelet with your own hands in a few minutes and at minimal cost.

A thick old leather belt can be easily and happily turned into a stylish bracelet. This is a pleasant activity that will captivate you and allow you to realize yourself in needlework. We don't need any special tools. This handmade idea does not require any financial costs. You can cut the leather with a stationery knife. We will sew on the beads with an ordinary strong needle. There will definitely be beads in stock. You can buy colored lace. It's quite inexpensive. We choose the color of the lace depending on our own preferences. The bracelet bracelet is made like this:
Cut the blank from the belt. It should be of medium thickness so that you can braid it later. We cut this workpiece not completely into three thin strips of equal width.

We make a hole in the part where we will have a buttonhole.

Cut two pieces of colored thin lace. Their length should be longer than the leather blank, since we will be forming a buttonhole from the lace.
We thread both pieces of lace through the hole.

We tie a knot so that we get a loop into which our beautiful metal button will pass with medium effort. We secure this loop with thread.

We braid a braid from five parts (three leather and two parts from a lace).

We wrap a colored cord around the end of the bracelet. We tie it in a knot.

We sew the button so that the length of the bracelet suits us. To do this, mark the location where the button is attached when trying it on your own wrist.
Use a blade to cut off the excess ends of the braid. We tie two wooden beads to the ends of the lace.

We sew beads, all kinds of metal decorative elements, beads with invisible stitches.

We enjoy wearing a stylish bracelet that we made with our own hands. An old belt turned into a real designer piece of jewelry.

Other options for alterations and the use of old things can be found in.

Master class on making a bright leather bracelet

A stylish leather bracelet is an essential attribute of a fashionable look. The variety of these accessories today is enormous. And despite this, it is still quite difficult to choose what will suit us in a particular situation. Therefore, we suggest making a stylish decoration yourself. A bracelet will be made that will complement an airy dress with leopard print, or any other “leopard” item. The whole secret lies in the stone that we will use. This is a moss opal that resembles the color of a leopard. To highlight the stone, we will use bright red leather. We will place a metal base inside the bracelet.

Materials for making jewelry:

— genuine leather of bright red color;
— moss opal 2.5x1.7 cm;
— metal base 18x2 cm;
— cord (5 cm);
- instant glue;
- scissors;
- ruler.

We lay out the natural leather in front of us. We place a metal base on top of it. Using a ruler, measure the dimensions of the future decoration. We mark the center where we will attach the stone, and the edges.

We attach moss opal to the center of the workpiece. Generously coat its flat side with glue and apply it to the skin. We wait until the glue dries completely.

Glue a metal base to the wrong side of the leather. In this case, we lubricate only the central part (under the stone) of the base with glue, leaving the edges unfixed for now.

We take a small piece of cord.

Lubricate it with glue and wrap it around the stone from the wrong side of the leather.
We stretch the skin over the cord so that we get a convex frame of the stone.

Lubricate the metal base with glue. Apply the skin on one side first. Make a light wave on the surface of the skin. To do this, gently tighten the skin with your fingers in the center and smooth out the rest of the skin.

We do the same on the other side.

Trim off excess skin. We leave a little margin for the inside of the decoration, literally 1.1 cm.

Lubricate the back side of the metal base with glue. Carefully glue one of the edges of the leather, tucking it inward.

Glue the second edge of the skin. We make sure that the edges lie as evenly as possible and that there is no gap left at the junction.

We also fold the skin at the junction of the two ends of the bracelet and hide it inside.

Remove traces of glue from the surface of the leather. Carefully bend the metal base.

The bright leather bracelet is ready!

An outdated jacket, an old bag or a piece of leather lying around in the bins is an ideal material for creating a stylish piece of jewelry.

In this master class you will learn how to make a leather bracelet with your own hands from a tin can and a small piece of soft leather. For decoration, you can take any stone that you have, buy a natural mineral, or use an imitation made of plastic or glass. Here amber plays the role of a decorative element.

Preparation of materials and tools

To transform a tin can, a damaged piece of amber and several small pieces of leather into a massive and stylish women's bracelet, you will need the following tools and materials:

• pieces of soft and thin genuine leather;
• amber;
• transparent universal glue “Dragon”;
• canned food tin;
• metal scissors;
• scissors;
• ball pen.

If there is no stone, you can make it from polymer clay, for example, according to.

Step-by-step master class with photos

First, make a metal frame for your leather bracelet. Tin from a can of canned olives or olives is best suited; it is thinner and at the same time holds its shape well.

Using tin snips, cut out a rectangle and trim the corners, rounding them.

Give the frame an oval shape. Try it on your hand and, if necessary, reduce the length.

Make a backing from the wrong side. To do this, use a ballpoint pen to trace the outline of the frame on a piece of leather. For this stage, you can take material with defects, for example, with uneven coloring or rougher material.

Using scissors, cut out the backing, allowing an allowance of one centimeter around the entire perimeter. Spread the entire back side with transparent universal glue “Dragon” or “Moment”.

Glue the backing to the inside of the frame. Fold the seam allowance to the outside, and make folds from excess leather at the ends. Please note that the leather, lubricated with glue, stretches well. Therefore, at the edges of the blank for the leather bracelet, stretch it slightly.

Let the glue dry for a couple of minutes and use scissors to trim the folds as close to the plane of the bracelet as possible.

Decorate a women's bracelet with thin, beautiful leather and stone. To do this, take a segment three times larger in area. Apply clear glue generously to the middle and to the stone.

Mark approximately the center point on the product and start gluing the skin from this place. Place amber in the same place. While the glue is still wet, use your fingers to form folds around the stone. Cover the chipped area with drapery.

Add glue to the remaining surface and glue the leather decor along the entire outer surface of the bracelet.

Shape the decorative drapery to your liking. Fold the edges inward. If possible, try to keep as few folds as possible on the inside of the product. Trim off the excess.

After a couple of minutes, cut off as many folds of leather as possible from the inside of the bracelet.

Cut out another piece for the back side. Measure the workpiece by placing it against the surface.

Apply glue to the entire surface of the part.

Carefully glue the part to the inside, thus hiding the edges that are folded on the outside. Start gluing from the ends of the product.

Once the glue has completely dried, give your leather bracelet its final shape by pressing it into a small oval with your hands for a few seconds.

A thin metal base will help maintain its shape and add elasticity to the structure. Using this technique, you can decorate women's leather bracelets with your own hands and other elements, for example, shells, sea stones and glass, metal parts and even interesting beads. In any case, your masterpiece will be unique.

We also have a tutorial on making a leather bracelet with your own hands, but it uses a cord weaving technique. If you still have some skin left, decorate for yourself or as a gift. It’s very exciting to create; the end result is always an unusual souvenir or jewelry.

Other instructions for making jewelry using different techniques. Join us on social networks to receive news about publications, see crafts and other participants, and sell yours.

How to make leather weaving? How to learn quickly? How to become a master and give beauty to yourself and your loved ones? We'll talk about this in the article. Fashion does not stand still. Very often, in magazines and fashion shows, skin dominates. Previously, leather products were reflected in clothing, but recently leather accessories have been gaining popularity. Let's look at the basics of working with the material.

Handicraft progress

The history of working with leather is quite interesting. Processing began from the Stone Age, when clothing made from skins, belts, belts and bags gradually appeared.

Weaving is a type of leather processing where craftsmen combine several techniques to create a product. Often in jewelry practice there are woven macrame elements made from lace.

What can you create from? It's easy to use up unwanted leather items. For example, gloves, briefcases, etc. But do not forget about the quality of the material. Pay special attention to thickness, elasticity and color. It will be more difficult to work if the product has a drawing or some kind of ornament.

But the masters advise not to remake the old into the new. It is better to spend money on new leather so that the accessory will last longer and be attractive. Each item has its own expiration date, so often unnecessary things can ruin the whole job. Leather is sold in specialized stores. I'm glad that there are many colors and product options.

For beauty

It’s easy to make bracelets with your own hands, which are becoming more and more popular. Such products look elegant and beautiful. It all depends on the weave. You need to purchase pieces of leather that will become the base and cut them into strips. Manufacturing requires few materials and a lot of attention.

So, let's begin. Let's consider several weaving options that are suitable even for men. The first option is a bracelet bracelet.

It is thin, delicate and looks beautiful on the hand. This accessory is multifunctional because it can be worn at any time of the year.

We will need a leather blank. If there is no such thing, then cut a wide strip of leather and put buttons at the ends, as the diagram shows.

Depending on the fittings, the style of decoration changes.

The second option is “Women's Secrets”. The accessory is suitable for bright summer outfits. You can choose the color yourself, depending on your ideas. The technique is simple, even a child can handle it.

Take three colors of thread, a strip of leather, some chains, a plug with a clasp, scissors and glue.

1. Cut the thread into 9 parts (20 cm, two pieces each). We lay them out in threes, having previously secured the edges.
2. We start to weave. Watch every movement so that the product is smooth and beautiful.
3. Finally, pay attention to the clasp. Secure the bracelet before trimming the ends. Apply glue to the ends of the bracelet and clasp. The accessory is ready!

To make sure it works correctly, look at the photo:

The third option is an unusual braid.

1. To get a wicker product, we take three identical leather ribbons.
2. Remember the numbering of the stripes: 1-left, 2-middle, 3-right.
3. We start weaving. We pass the edge of the product through No. 2 and No. 3, and lower it down. The stripes are twisted.
4. We pass the edge between No. 1 and 2, lowering it down.
5. We repeat the previous movements until the end of work on the product. Straighten it.

Craftsmen divide types of bracelets into categories. They vary in design.

1. Thin and thick accessories:

1. Accessory with buttons, fasteners:

1. With patterns or rhinestones:

1. With a few turns around the wrist:

In addition to regular weaving, there is circular weaving. In addition to thin leather, you will need a rope. It is this that the cords braid.

Progress:

1. Take four birch cords about 2 cm. We prepare a rope of the same length. Pay attention to the diameter - from 3 to 5 mm.
2. Using glue (preferably “Moment”) we connect the ends in a circle (15-20 mm in length). Secure the gluing area with thread.

1. We divide the cords into two parts. Remember the left and right parts by mentally numbering them. We take the left ones in the left hand, and the right ones in the right.
2. Let's use the diagram.

1. When the length is about 130-140 mm, we secure the end with thread.
2. Lubricate the unbraided ends with glue. Leave to dry.
3. Flatten the ends of the tubes. Make a place for the fixer, install.

Here is the result, which looks like a whip:

Leather bracelets do not last forever because they are made of delicate material. You don’t always find high-quality products in stores, so when purchasing, check its strength and the presence of excess threads. Of course, the leather belt also needs to be checked. Often they can become worn, worn out and lose their shape. It is dangerous to buy products in online stores; there is no way to check the quality and verify the authenticity of the brand. Try making your own accessory. It's easy to enjoy the work. But it’s even nicer to wear something you made yourself.

Video on the topic of the article