How to make varnish at home. How to make polish that keeps nails healthy? What is needed for a home manicure

They say men are always children. Whether this is true or not is hard to say, but it’s easier to believe that a little girl lives in every woman. We also, as in childhood, love to dress up, we will certainly rush to our mother in trouble and never mind creating something useful for our beauty with our own hands. If in childhood it was experiments with the creation of perfumes from some fragrant plant, then in adulthood the field for fantasy is much larger. What if we conjured up the creation of ... say, nail polish. For the sake of economy, curiosity, the desire to decorate nails with a unique color - it doesn’t matter ..

1. Transparent varnish (water-based). Can be bought at a pharmacy
2. tassel
3. Any eye shadow
4. Food coloring of desired color
5. White clay
6. Olive oil

As you can see, almost all the ingredients are natural and this is already an important advantage of homemade nail polish. However, olive oil, white clay or henna can also be used here. Such nail polish at home will also be healing.

We conjure over the “potion” - we make a healing varnish

What do you need: olive oil and any of the natural dyes.

How we do:

1. Mix the dye (henna or, say, clay) until the density of a smooth dough.
2. Apply this mass on pre-treated and degreased nails with acetone.
3. Leave on for twenty minutes to dry.
4. Wipe your nails with a wet cotton pad.

To make nail polish at home resistant, repeat the procedure for such staining two to three times a week. Thus, the nails will acquire not only a healthy color, but also the same shine. And in general, health, because olive oil perfectly nourishes both the cuticle and the nail itself, and henna or, say, white clay even out.

Option 2, colored varnish with dye

What do you need: food coloring of the desired color, colorless water-based varnish, metal ball.

How to make nail polish:

1. Grind food coloring in a container
2. In a colorless varnish (necessarily water-based), add pounded food coloring.
3. Place a small metal ball into the container. It is needed for good whipping of the contents.
4. Stir the resulting mixture and use as directed.

Option 3, Colored nail polish with eye shadow

What you need: To make nail polish at home, use good eye shadow.

How to do: all actions repeat the option with food coloring. The option with shadows is advantageous in that the latter have a richer palette of colors, which will allow you to make nail polish with an absolutely unique shade. And not just one, but a whole collection.

Option 4, Making varnish with alkane root

What you need: half a teaspoon of alkane root (a plant with medicinal properties, actively used in cosmetology, for the production of soaps, lotions and creams), three tablespoons of olive oil, a quarter teaspoon of beeswax and a couple of drops of vitamin E oil.

How to do:

1. Heat olive oil and alkane root in a water bath.
2. Remove from heat and leave for five to seven minutes.
3. Strain the mixture through a fine sieve, return to the steam bath.
4. Add beeswax to it.
5. When the wax melts, add the vitamin E oil and mix everything thoroughly.
6. Remove mixture from heat.
7. When it cools down, you can apply it on your nails.

Nail polish created in this way at home is applied with a brush or drawing so that it does not get on the skin of the hands.

Alcona, as well as blue, white clay, as well as oil with vitamin E, can be bought at a pharmacy.

How to make gel nail polish shiny or glowing

Lovers of shiny or glowing marigolds will need glow-in-the-dark sticks or the same resin powder (the latter is preferable, but will cost more). For shine, dry sparkles are used, which are simply added to hand-made or purchased varnish.

To make the varnish glowing, add six caps of glowing resin (caps from a jar of resin) to it. Resins are sold in different colors, so there will be plenty to choose from to your taste. Don't forget also.

Today it is easy to buy ready-made therapeutic nail polishes: with calcium, various oils and protein complexes. But no matter what useful additives a purchased varnish is endowed with, it is still a chemical agent, i.e. of synthetic origin, because in addition to them, it usually contains toluene, formaldehyde, aspartame ... And it has long been proven that these substances can cause serious harm not only to nails, but also to health in general, if you use purchased varnishes often. This is exactly what most working women do - beautiful nails are the very “finishing touch in an ideal image”. Now imagine that you also often paint your nails with healthy homemade varnishes made from natural ingredients. Agree, a good reason to conjure over your own masterpieceJ).

To make your own nail polish, you should use certain tips. At home, you can create a unique manicure.

Lacquer with ink

In the photo of homemade varnish you can see the original shade of varnish. In the event that you do not like the color of your varnish and want to change it, simply combine the varnish with ink. You should also purchase ink of a certain color. You can also use the budget option. For example, for these purposes, you can use helium ink, or a ballpoint pen. During the work process, you should be careful.

Matt lacquer

You can make an ordinary glossy varnish matte varnish. Using corn starch, you can easily do this. Thus, the matte varnish you received will become a few tones lighter.

To achieve this effect, it is worth mixing a few drops of varnish along with starch. Enough of the last component about a teaspoon. Apply the mixture to the nail area. It should be noted that after complete drying, a pleasant shade of matte texture will be obtained.

You can achieve the same shade using ordinary powder. You can also use shadows with a matte texture.

You need to change the varnish with your own hands. Just add a little loose powder to the bottle area. Rolling the paper using the funnel method will keep the powder from spilling past the bottle area.

You can add a few balls to the bottle. Thus, you qualitatively, much better mix the bottle. A matte effect is obtained by combining light, loose powder together with a colorless varnish.

Nacre

To make glitter polish, add glitter to the bottle. This mixture should be lubricated nails. Often, in order to make your manicure more beautiful, original, it is worth sprinkling the tips of your nails with sparkles. At the end, cover the surface with a clear varnish to strengthen, maintain an attractive appearance.

To add mother-of-pearl to your nails, use the master class on how to make a manicure at home. To do this, you can simply add shadows for the eyes.

To do this, you need to grind the shadows. To do this, you can crush them in a bowl with any hard object. They should turn into a fine powder after such manipulations. Thus, the varnish coating will be uniform. Powder should be added directly to the varnish.

You can also make a varnish of the same color as the shadows you use. To do this, you need to take a transparent varnish. To complement the image, you can make a manicure to match the color of the makeup.

Using the applicator, crush and apply shadows on wet nails. Then blow off the excess, with the help of a transparent varnish it is worth fixing the base.

Making a new varnish

Follow the instructions on how to make varnish at home. It is worth choosing two varnishes that are combined with each other to begin with. Then you should pour them into one jar.

Many people use one secret how to make varnish thinner or thicker. You can also put one varnish on top of another. While you go about your business, the varnish will blend naturally. After the end of the procedure, mix, shake the bottle vigorously. With simple steps, you will prepare a completely new varnish.

With gradual darkening, you will get an attractive ombre effect. This effect is quite popular today. The positive thing is that such a varnish can be made independently.

Glowing varnish

To obtain this effect, you should combine an acrylic helmet and varnish. Thus, fluorescent acrylic paint can be purchased at a regular office supply store. For these purposes, also use a helium pen.

To get the best shine, you should use a transparent varnish base. It is often applied to the top of colored lacquer. Also, the fluorescent substance goes well with any color. It is best to use white. To obtain this effect, you can use a light emitting stick. One stick is enough for these purposes. The main thing is to use one important condition - a combination of both colors.

To make such a varnish, it is worth kneading the stick well over its entire surface. In particular, this applies if it is made in the form of a necklace, or a special bracelet. To do this, cut off one end with scissors. Next, cut off the tip of the stick in the area of ​​\u200b\u200bthe vial. Gradually squeeze the contents from the stick into the inside of the vial. Then you need to apply nail polish.

It is worth remembering that when making varnish in this way, a similar effect lasts only for a few hours. To prolong the desired effect, cover the varnish with a transparent base.

To prepare the varnish, you should start preparing the necessary materials for this. You need a water-based clear varnish. Use the polish you already have. It is best to use a bottle bought at a pharmacy.

Also for the process you will need a brush, eye shadow. You should use the food coloring of the color that you like best.

Also prepare henna and white clay. The main advantage of self-made varnish is that all the ingredients are natural, improvised, and have a low cost. Also, in addition to all the above ingredients, you can add olive oil. The use of such a varnish can be considered a therapeutic procedure for nails.

conclusions

To create an interesting varnish at home, you should use different methods. Follow the instructions, use interesting videos to get the desired effect. Remember that the main thing is not to be afraid to experiment. From improvised materials, old varnishes, or long-forgotten bottles, you can create a truly original and beautiful varnish. A manicure created in this way will undoubtedly set you apart from the rest.

DIY nail polish photo

We've put together 30 tricks and tips for girls who like to take care of their nails on their own. How to quickly dry a manicure? How to make varnish? How to draw a french neatly? About this and not only - in our article.

1. We erase the varnish carefully

So that after removing red or other bright varnish, the skin around the nails does not look like you have killed someone or have been poking around somewhere, apply a greasy cream to your hands before the procedure.

2. Remove the remnants of varnish from the skin

If you did not use the previous advice and the skin around the nails is stained, adhesive tape will help eliminate stains. Adhesive tape perfectly collects the remnants of varnish, especially silver.

3. We erase the varnish quickly

In the nail department of cosmetic stores, they sell various products for quick nail polish removal. They are bubbles with a sponge soaked in cleansing liquids. You do not need to run a cotton swab over your nails: just dip your fingernail into the bottle and wait a bit.

Such a tool can be made independently. Take a small glass jar, place a cut-to-size sponge in it and soak it with nail polish remover. The principle of operation is the same.

4. Remove glitter polish

Dampen cotton pads with nail polish remover, place them on your nails, and wrap each finger in foil. After 10 minutes, the varnish will come off easily, despite the sparkles.

5. Whiten nails

Sometimes colored varnish is absorbed into the nail plate, leaving behind an ugly yellowness. You can get rid of it with a whitening toothpaste. Take an old brush and clean your nails with it.

But to prevent such incidents from happening at all, do not forget to use a base coat before applying the main varnish.

6. Save a broken nail

You will need a tea bag and clear nail polish. Apply the latter to the damaged nail, and then place a patch cut from a tea bag over the crack. Cover the nail again with colorless varnish.

7. We store varnishes conveniently

If you store polishes in an opaque box, label their caps with the appropriate shades. So you do not have to get all the bubbles in search of the right one.

8. We make varnishes ourselves

If you don’t have enough varnishes or you can’t find the right shade in the store, you can do what you want yourself. You will need colorless varnish and mineral shadows. They are perfectly soluble in varnish, while you can adjust the saturation of the color.

You can also add various glitters to homemade varnish.

9. Opening a bottle of varnish without difficulty

If the cap of the varnish is glossy, tightly twisted and does not lend itself in any way, stationery gum will help to cope with the problem. By wrapping them around the lid, you will get the right grip and easily open the varnish.

10. We extend the life of a manicure

If you want the varnish to last longer, before applying it and applying the base, the nail plate must be thoroughly degreased. To do this, wipe your nails with a cotton swab dipped in white wine vinegar.

11. Paint your nails the right way

12. Create an even finish

One thick layer will never lay down as evenly and neatly as several thin layers. Just be patient: let each layer dry.

13. Make a matte finish

Matte lacquers are very popular lately. But if you don’t have one, then just mix light loose powder with transparent varnish. In this case, mix as shown in tip number 8.

14. Make polish brighter

Many girls know that if you apply shadows on the base, they lie more evenly and the color is richer. It's the same with varnishes.

If the colored nail polish looks faded, use a white matte polish as a base. You will get a bright manicure and will be able to avoid multilayer application.

15. Apply glitter correctly

This video shows how to apply large glitter polish so that it adheres well to the nail and does not bulge.

16. Protect the skin

Applying a stamping or gradient to your nails can make the skin around it very dirty. We already wrote that in this case a special latex varnish will save. But if you don’t have one, use PVA glue: it also forms an easily removable film.

17. Eliminate manicure flaws

It is quite difficult to paint nails and not stain the skin around them, especially on the right hand. But it doesn't matter if it happened.

Take a thin brush, soak it in nail polish remover and wipe off the blemishes. Unlike a cotton swab, the brush does not cling to the varnish and does not leave lint.

18. Draw patterns on nails

If your eyeliner is dry or just doesn't work for you, don't rush to throw it away. Her excellent elastic brush - as a rule, there are just such - can be used in nail design to draw fine lines.

Some girls adapt even ordinary stationery markers for nail art.

19. How to Create an Animal Print on Your Nails

If you cut the eraser on a pencil like this, you get a homemade stamp: dip it in black varnish and make leopard prints on your nails.

20. Making blanks for nail art

Apply silver polish on a clear base and let it dry. From the resulting film, you can cut blanks for nail design.

21. Making sliders for design

The principle is the same as in the previous case. Only here you need to make a film of transparent varnish and already apply drawings on it. For example, with the help of dots.

22. Replace dots

Dots is a stick with a metal ball tip. With it, you can create various patterns on the nails.

If you do not have dots, use improvised tools. For example, safety pins, toothpicks, empty ballpoint pens, and so on.

23. French Manicure

French manicure looks feminine and goes with almost any occasion and outfit. But not everyone can draw a smile line for a jacket. The video shows several ways to do it neatly.

In addition, you can highlight the tips of the nails using a regular stationery gum.

Just pull it around your finger and apply white polish. This is a budget alternative to custom vinyl stencils.

24. Masking the roughness of the jacket

If, despite all the tricks, you can’t get even stripes, you can go for a trick. Draw a line under the white part with a shiny varnish. Sequins will hide flaws, and you will get an original design.

25. Making stencils from electrical tape

This irreplaceable thing in the household can also be used in nail art. For example, for all the same rendering of a jacket.

Also, excellent stencils are obtained from electrical tape, which, unlike adhesive tape, do not stick tightly and do not peel off dried varnish.

26. Dry your nails quickly

If you do not have a special drying agent, and you are in a hurry, dip your fingers in cold water for a few minutes. So the varnish will grab much faster.

27. Protect wet polish

To protect freshly painted nails from small villi and dust, drop cuticle oil on top.

28. Save a Manicure

If you have smeared a manicure just done, do not rush to wash everything. Just wet your finger with water and gently rub the affected area. The varnish has not yet hardened and will easily return to the desired position.

29. Shake the polish properly

What do you do before opening a nail polish bottle? Shake it well so that it is less viscous? Great! Just do it right: put the bubble between your palms and roll it.

If you shake and turn the varnish, then when applied, it may bubble up.

30. Save thickened varnish

Favorite varnish began to thicken and already poorly fits on the nails? Place it in the refrigerator for 10-15 minutes and then shake well.

How to make homemade varnish for wood from improvised materials at home It is noteworthy that you can not buy varnish, cook it yourself. Below are a few recipes for such varnishes. “Varnish for wood in 5 minutes”: I pour a third of the volume of acetone into a container (about 100 ml) and add finely chopped foam plastic (from equipment packages). In volume, this is approximately 0.3 dM cubic (depending on the density of the original foam). A transparent jelly-like mass is formed, with which I cover. Moisture resistant. It has good impact resistance properties. And most importantly - it's cheap and affordable. Oil varnishes, which are a mixture of drying oil with expensive resins (amber and copal), are the best of all varnishes both in beauty and durability. By mixing turpentine with them, they try to make them dry faster, but these varnishes, winning in drying speed, always lose strength and durability. Copal oil varnish. Take 100 weight parts of good linseed oil and boil it in a cauldron with gradual heating. When bubbles begin to appear, you need to maintain an even fire so that the oil boils slightly. At the same time, 15 parts by weight of East Indian copal are melted in a water bath and brought to a boil. When bubbles begin to appear in the melted copal, immediately pour hot linseed oil into the resin in parts, stirring all the time. When all the resin is well connected with a part of the oil, then it is poured, with constant stirring, into the oil, boiling in a large cauldron. Then pour 1 weight part of manganese borate into a large cauldron and continue cooking for about 2 hours, removing the resulting foam, until the varnish becomes thick and slowly flows from the veil with transparent, golden threads. If you drop varnish on glass, then the drop should be high in the form of a hemisphere. Cooled, the drop should be like a thick syrup, stretching into threads. These are signs that the combination of oil and resin has taken place. After that, the fire is extinguished under a large cauldron and the mixture is allowed to gradually cool down to 60 + C. Then 70 weight parts of turpentine are poured in in parts, making a test after each addition whether the cooled drop retains the consistency of a viscous syrup. If the viscosity of the lacquer noticeably decreases, then the addition of turpentine should be stopped and the lacquer is considered ready. A good varnish should be golden in color, lie smoothly on the surface to be painted and dry after 6-8 hours. For painted surfaces, where the yellowish tint is not important, this varnish can be considered excellent. Preparation of dammar, copal and mastic varnish For objects painted with light colors, and for paintings, the so-called dammar varnish is used. It is prepared as follows: take 4 parts of dammar resin, 5 parts of turpentine and 1/4 part of bleached (without lead) linseed oil. This mixture is boiled until completely dissolved, after which it is filtered through a thin metal sieve, allowed to settle and drained. To prepare copal varnish, mix 1 part of light soft copal with 2 parts of turpentine, and if you want to get an elastic varnish, add another 3% camphor. Then the bottle is filled up to 3/4 with this mixture, corked and placed in the sun or kept warm, shaking from time to time. When the mixture is completely dissolved, it is allowed to settle, drained and filtered through cotton wool. If the varnish prepared in this way is not completely transparent, then it should be boiled in a bottle for an hour, placing the bottle in a water bath. Mastic varnish is prepared as follows: for 12 parts of purified, well-washed mastic, 1.5 parts of pure Venetian turpentine, 0.5 parts of camphor powder, 5 parts of well-ground glass and 30 parts of purified turpentine are taken. The mixture is dissolved in a water bath, then allowed to settle, and after a day it is drained and filtered through cotton wool. Castor Lacquer The dry distillation of castor oil yields a rubbery residue which, when dissolved in hydrocarbons (gasoline) or alcohol, makes an excellent, impermeable, sun-resistant, highly durable varnish. Wool, linen, etc. smeared with this varnish. become impervious to water. When varnish is mixed with earths or metal oxides, a very strong putty is obtained. Asphalt varnish. Here are some recipes for such varnish. I. Melt 1 part of asphalt, allow to cool, grind, add 2 parts of turpentine and dissolve. Add soot if desired. II. Take 3 parts of asphalt, 1 part of coal pitch (solid residue from the distillation of coal tar) and dissolve, with gentle heating, in 6 parts of turpentine. III. Take 250 parts of asphalt, 475 parts of linseed drying oil, 120 parts of rosin, 180 parts of turpentine. This varnish is especially suitable for tin. IV. Take 6 parts of asphalt, 1 part of boiled linseed oil, 8.5 parts of turpentine. This varnish is especially suitable for iron. V. Take 20 parts of asphalt, 5 parts of rosin, 2 parts of soot, 50 parts of kerosene. VI. Take 1 part of asphalt, 1 part of rosin, 8 parts of turpentine. Japanese varnish. Take 45 parts of turpentine and 60 parts of lavender oil, dehydrate it with calcium chloride, separate the liquid from the sediment, dissolve in it when heated 1 part of camphor with 15 parts of copal resin and filter. Dutch varnish "Elemi" for oil paintings Take 8 parts of mastic, 1 part of resin "Elemi", 2 parts of Venetian turpentine, 29 parts of turpentine. Mastic varnish for oil paintings Dissolve 6 parts of sandarac, 2 parts of mastic, 1 part of Copay balsam, 1.5 parts of Venetian turpentine, 1 part of French turpentine, 20 parts of alcohol (96%).

Lacquer is a type of coating that protects the surface from moisture and mechanical damage, besides, it does an excellent job with its aesthetic function. Modern manufacturers are constantly releasing new types of this finishing material.

Taking a course on organicity and environmental friendliness, experts recommend opting for a varnish based on acrylic.

What it is?

Acrylic varnish is crushed plastic dissolved in acrylic. After drying of such a composition, a thin colorless acrylic film is formed with high resistance to mechanical damage.

The main substances that make up the varnish fit in three points:

• liquid polymer (acrylic);
• antiseptic (to protect wood from moisture and pests);
• plasticizer (the main component that gives the coating maximum strength and durability).

Acrylic varnish is a ready-to-use substance: homogeneous, transparent, practically odorless. It is based on high-quality acrylic resins, not burdened with color, and water dispersions.

To get acquainted with this almost universal coating, its main properties and characteristics should be highlighted.

• Acrylic varnish is a liquid. It is characterized by high viscosity and the ability to dissolve in water.
• One of the amenities is the minimal presence of smell (at least unpleasant).
• Despite the fact that this type of varnish is water-soluble, it cannot be washed off after drying.
• The film that appears in place of the dried acrylic varnish has increased elasticity and wear resistance.
• The coating does not lose its transparency even with time and under the influence of sunlight.
• If necessary, such a varnish is even recommended to be mixed with water-soluble paints.
• Ideal for outdoor and indoor work. It interacts well not only with wood, but also with brick.

Peculiarities

The main and most pleasant feature of acrylic lacquer is its ready state, that is, you can buy it, bring it home and start processing right away. Also, professionals advise to stop their attention on it due to the fact that the coating has a high resistance to temperature extremes (it does not crack either in the heat or in severe frost). Acrylic lacquer is so versatile that it easily falls not only on wood or brick. There is information about the successful application of it to paper, wallpaper, cardboard, plastered surfaces, metal and plastic products, fiberboard and drywall, glass surfaces, and more. Let's dwell on the positive and negative aspects of acrylic varnish.

Advantages:

• high level of moisture resistance and thermal conductivity;
• transparency and elasticity;
• environmental friendliness;
• pronounced antiseptic properties;
• excellent decorating solution;
• low fire hazard;
• resistance to household chemicals and alcohol solutions.

There are practically no shortcomings in the use of acrylic varnish, with the exception of the human factor and the simple inattention of buyers.

Professionals are always advised to pay attention to the date of manufacture and the expiration date of acrylic varnish, which can significantly affect its physical and chemical characteristics. If the coating has been stored in the cold for a long time, it may freeze and lose its main properties: elasticity and ease of application. Of course, the disadvantages include the high price for a quality product.

Required Tools

Preparing the surface for applying acrylic varnish is the main and important step in the work. First you need to clean everything from dust, dirt and grease. In the case of re-application, the old layer must be removed and sanded what will be varnished. The first application on wood is characterized by the use of three layers: the first is varnish, diluted with a solvent by 10%; the second and third are undiluted varnish.

It is recommended to apply an acrylic coating using a special roller. Professionals do not advise the use of a brush when it comes to large sizes of the varnished surface. The interaction of the substance with the skin is unacceptable, therefore, work should be carried out with gloves.

When decorating a room and its elements, you may have the idea of ​​adding color to the varnish. Of course, bright colors cannot be achieved, but tinting makes it easy to give your favorite piece of furniture a new shade.

Kinds

Starting to purchase acrylic varnish, you should understand its main types. There are countless varieties of this finishing material on the modern market. Even before buying and applying acrylic varnish, you need to firmly decide what kind of coating you want to get in the end: matte or glossy, transparent, dull or with a certain shade.

There are several main characteristics by which varnishes can be divided into groups.

• Compound. One-component - a coating, which includes only acrylic. Two-component - varnish, supplemented with polyurethane.
• Appearance treated surface. Two polar subspecies: matte and glossy, and one adjacent - semi-matte. Matte varieties have a pleasant silky texture with the addition of velvety notes. Gloss, on the contrary, creates the impression of an impenetrable ice cover.

• Surface type:

1. for the floor (acrylic-based urethane parquet varnish is suitable for perfectly flat surfaces; for uneven parquet, it is better to use matte varieties);
2. for furniture (often used to give freshness and brightness to old interior items, so it is best to choose a polyurethane glossy varnish).

• Color. In its original form, acrylic lacquer is a liquid transparent substance that can be easily combined with any water-based paint, acquiring its unique shade. Just like paint, it can be tinted and be colored. From colorless it easily goes to extremes: white and black.
• Packing. It can be an aerosol in a can designed for wood processing and tinting (such an aerosol universal acrylic lacquer allows the imagination to take part in decorating the room). The spray promotes even, lightweight application. The main container for coating is also a jar or bucket, depending on the desired volume.

You can list the types exactly as much as you can sing praises to all the advantages of acrylic lacquer. Insulating and antiseptic properties, a slight presence of odor also make it possible to distinguish a particular type of varnish into a separate category and subspecies.

And such a universal remedy as VGT acrylic lacquer leaves no chance at all for any of its fellows, because it is VGT that has universal qualities for processing both parquet floors and other motley surfaces.

Selection and application

The choice of the right finishing material not only saves time and money, but also the successful processing of the selected surface. Acrylic lacquer is so unique and versatile that it can easily be used in any interior design with your eyes closed.

When processing wood, acrylic-based varnish has a practical and aesthetic effect. What is the processing of a wooden floor worth! In the case of working with a solid rough board, it is necessary to choose options that form the most dense layer. Also, such a coating should easily endure temperature fluctuations and be resistant to moisture. Acrylic varnish for parquet was originally created so that the coating was thin, transparent and almost weightless, however, if this type of varnish is applied to rough boards, the floor will soon crack. It is worth remembering that it will not work to quickly varnish the floor, because the first layer dries for at least 4 hours and at least 12 hours after finishing. In order to make the life of the craftsmen as easy as possible, the acrylic floor lacquer was originally made white. When dry, it acquires perfect transparency, which gives a signal for applying the next layer.

For outdoor work, the application of this agent as a finish is also applicable. Resistant to sudden changes in temperature and mechanical damage, it allows the surface to retain its original pattern and shade.

Smaller projects also need to be treated with acrylic lacquer. For example, it is very convenient to use it to cover stools and bedside tables, stairs, railings and plasterboard walls, countertops, decorative interior items (figurines, frames, and so on). Even painting requires processing - it is worth covering the picture with acrylic varnish so that it pleases longer with its bright pristine colors.

Due to the high cost of acrylic varnish, there are several ways to make your own wood varnish at home. The oldest and most common method is to mix acetone and Styrofoam. The consistency turns out to be jelly-like, not the most convenient for application, however, with its durability and wear resistance, it is not inferior to store-bought ones. You can use this mass to process small areas of the surface or to apply a protective layer on decorative interior decorations made by yourself.

Another creative area of ​​​​application of acrylic varnish can be considered decoupage.- decorating various interior items with pieces of paintings, drawings, ornaments and monograms on a paper basis.

• Padding. After cleaning the surface of dirt, dust and grease, it should be primed with a special primer or impregnation. This will help make the layer of varnish as even as possible.
• Grinding. The ideal mirror surface will allow you to get the so-called wet sanding: wetted wood is hard sanded, and only then a primer and acrylic varnish are applied. Each layer, except for the first, also continues to be sanded with fine sandpaper.
• Wash. In the case of decorating an already lacquered object, you must first wash off the old layer of lacquer. Most often, it is enough to just sand the surface, prime and apply a varnish layer. Sometimes it becomes so difficult to remove the old coating that you have to resort to additional physical effort or mechanical grinding. For example, to remove a layer of varnish from a guitar, you have to sweat a little. There is a risk of spoiling the tree, but there are humane ways: sanding with a sandpaper (sandpaper) and drying with a hairdryer (better than a construction one, but the main thing is not to overheat the wood).

The thickest mixtures are best diluted. Since acrylic varnishes are made on the basis of water, they can only be diluted with water, but the amount of thinner can be no more than 10% of the total mass of the coating.

Among the important recommendations for the use of acrylic varnish is compliance with external conditions: temperature and humidity. The first indicator must necessarily be positive, and the second must be at least 50%. Any deviation from these standards will lead to a deterioration in the performance of the coating.

Do not apply too thick layers. The thinner the layer, the smoother the treated surface will be, and the more aesthetic it will look.

Manufacturers and reviews

Among the most famous whales of the building materials market in the production of acrylic lacquer, the following brands stand out: Tikkurila, Neomid, Lakra, Optimist and Goodhim. Let's take a closer look at each.

Tikkurila- the queen of paints and varnishes. Acrylic lacquer for parquet - Parketti Assa received the maximum number of positive reviews. It has increased wear resistance, so it can be used in the most passable places. Easy to clean and does not deteriorate when using household chemicals of any composition. Even if there is a need to wipe off traces of paint from an already varnished floor, you can resort to White Spirit or any other solvent. Tikkurila varnished parquet flooring is not afraid of anything.