Hat size: for OG 56 -57 cm.

For knitting you will need: 150 gr of 100% cotton yarn 85m/50 gr; knitting needles number 3 and number 4.

DIMENSIONS
The description is calculated for knitting an adult model for a head circumference of 56-58 cm. After the WTO, the hat is approximately 25 cm in depth, loose fit.
YARN
"Rainbow wool-XS" yarn, 100g/100m, assorted colors
- 100 g per hat without lapel,
- 120 g (one skein) for a hat with a lapel.

Double hat for warmth.
Thread Mink from Color City 350m / 50g knitting needles No. 2.5 density of the front surface 33p * 40p = 10cm * 10cm. Suitable for exhaust gas 5 6cm in circumference. Beanie.
You can use a thicker thread, for this you should recalculate the OG you need, while maintaining a pattern repeat of 8 loops.

See description and knitting patterns for hats.

The dense pattern will not allow you to freeze in the most severe winter month, and the noble gray color, interesting weaves will make you feel beautiful even in the most severe January frosts.

The hat is suitable for head circumference 56-58cm.
Yarn: Merino Platinum Nuovo biply, 125m/50g, 100% merino; or Bianca Lanalux 2 ply, 240m/100g, 100% wool or any similar yarn that holds ribbing and arana well. Need 200g of yarn! (exact consumption 164g).
The model is wearing a hat made of Bianca Lanalux yarn (exact consumption 164 g).

Description and patterns of knitting hats can be downloaded

The hat is knitted from Alize baby wool in two strands. Two caps of bright orange color are knitted from Nako baby marvel also in two strands. Consumption 2 skeins per hat. I must say right away that the customer brought the yarn, this is her choice. For me, this yarn is the most terrible of which I have ever knitted - creaky, stiff and prickly. In a word, I do not recommend.Well, actually the transition to the description. It is designed in such a way that it can be knitted with any threads for any size.

How to knit an angora hat

Angora hat by Nastya @anastasia_muraschuk For a hat in size 56-58 you will need: ALIZE NATURALE yarn (230m × 100gr) -2 skeins of circular knitting needles 40 cm - 5.5 and 7.0 scissors and a needle. Hat knitting from angora, description of work We knit in 2 threads!!! On circular needles

Swing knitting, the work of Anna Chernova

Another interesting trend in knitting is SWING. FROM WIKIPEDIA - Swing, swing (English swing; "swing, oscillation"): Swing is a rhythmic pattern used in jazz. Swing is a type of orchestral jazz. Swing is a pair dance. Swing is a term in musical theater

Knitted hat, interesting models from our site

Snood and hat knitting. Catherine's works

Yarn Pekhorka "northern" (angora-30%, semi-fine wool-30%, high-volume acrylic-40%). It took 7 skeins of 50 g each. I knitted with a “pearl” pattern and an elastic band 2 * 2. The pompom is made from an old collar.

Tools and materials: knitting needles No. 4 - 4.5, terracotta woolen or semi-woolen yarn 50 g 90-100 m (200 grams), yarn residues suitable in color for colored stripes (about 100 grams). You can use leftover yarn. Written by Inna

To knit a hat you will need: Yarn angora ran 100g/500m, color 3864 Alize lanagold fine 100g/390m, color 203 We knit with an English elastic band in a circle of 35 cm. English elastic band 1 row: * 1 person., Straight yarn over,

Set Melange

Set "Melange". The work was sent to our knitting competition “Hats and sets”. Yarn “Nako Bambino Marvel”, 25% wool, 75% acrylic, 100 gr – 350 m, three skeins were used. Head circumference 56 cm, straight needles 2 mm.

Hats made of thick yarn. The yarn was used by the Pekhor factory “Souvenirnaya”. 160 meters per 200 grams. 50% wool 50% acrylic. The hats are thick yet soft. After washing, they remained unchanged. My daughter wears one all the time. A cap

Greetings to all knitting lovers! This time I come to you with a kit. Turban. Thread: see photo in 100 gr 266 m (70% acrylic and 30% wool). How to knit a turban with knitting needles, a description of the work Knitted with knitting needles 4.5 mm in two

Warm autumn hat. The work was sent to the Hats and Sets competition. Cap size 54-56. Yarn Alize lanagold fine 390/100. Circular knitting needles 3.75 - 4 cm. It took a little more than half a hank. Knitted in one thread. The hat is very warm

How to knit a beanie hat

Set “Anthracite” for a head circumference of 56 cm. The work was sent to our knitting competition “Hats and sets”. Semi-woolen yarn 1 skein - 100 grams / 100m, it took three skeins of black yarn and half a skein of gray yarn. Straight needles No. 3. BEANIE HAT,

Hello everybody! This set is knitted from yarn Alize Superlana Classic 280m - 100g (75% acrylic, 25% wool) in 2 threads, knitting needles No. 3, additional 2 knitting needles are needed for the pattern. The whole set took 230g. Gained 120p on the hat, then we knit

Knitted hat and snood with braids. Works by TatVen

Yarn Nako “Artist”. In 100 gr. 150 meters. Quite a thick yarn, but the twist is loose and due to this it is airy. Well, the composition is 35% wool, 65% acrylic. Very comfortable!! Yarn consumption - everything took exactly 4 skeins, 1 skein with a tail for a hat, the rest for snood.

Hat - Kubanka with knitting needles. The work of Oksana Usmanova

Hat - beanie with knitting needles. The work of Saule Vagapova

How to knit a stylish beanie hat with short rows. Many people like the beanie hat, and for good reason. Knitting is a pleasure. Even a beginner will cope, because. only knit and purl loops are used.

Hat - beanie with knitting needles. The work of Tatyana Ivanovna

Knitted from leftover yarn. Threads NAKO Arctic 40% wool, 60% acrylic. The hat and snood are crocheted with NAKO Arktik threads.

Knitted hat for women with a pattern. Catherine's work

Hat size - 56 (length 25 cm). Scarf - volume 110 cm (length 30 cm). Materials: KARTOPU GONGA yarn (100% acrylic, 300 m / 100 g) 200 g black and 50 g white, knitting needles No. 2.5 and No. 3.5, sewing needle.

Knitted hat City lights. Margarita's work

For knitting you will need yarn “Yarn Art” Turkey, 350m / 100g, 70% cotton 30% viscose, two skeins of different colors. Hosiery knitting needles No. 2. Cap size 56.

Knitted hat for spring. The work of Valentina Kaldysheva

Knitted with 100% acrylic yarn. Light as a feather. Delicate and soft. The hat model knits simply and quickly!

Hat - a cat with knitting needles. Natalia's work

Wool mixture yarn, it took 2 skeins.

Valeria knitted this hat for herself, for a head circumference of 56-57. We take knitting needles with a diameter of 5 mm, the yarn of the main color, and we collect 98 loops.

Green knitted beanie hat

Favorite beanie. It turned out to be a very useful wardrobe accessory. It pleases with a variety of ways to wear it and suits everyone! For this hat, I cast on 3.5 105 loops on circular needles (the number of loops should be a multiple of 3).

Knitting a warm hat with knitting needles. The work of Larisa Velichko

To knit a hat, you will need: 100 g of Lanosso Alpacana yarn, knitting needles No. 4; 2 wooden buttons. Cap size: S/M - M/L . Head circumference: 52/54 - 56/58 cm.

Pink knitting hat for women

Hat: Double elastic band 2*2. further: 1st row: 1 persons, crossing of 2 persons of loops, etc. to the end of the row 2nd row (and all even rows) all from the loop of the 3rd and the crossing of 2 knit loops of 1 knit, etc. 5th row knit 2, cross 2 knit loops 7th row as the first

Knitting a hat with braids. Valeria's work

Size: 56-57. Semi-woolen yarn 200 grams. Spokes straight No. 3.

Knitting hats with knitting needles. Valeria's work

Size: 56-57. Semi-woolen yarn 150-200 grams. Spokes straight No. 3.

Hat knitting Robin

Knitting a hat with beads

The hat is double, the elastic band is also double hollow. Tip for those who want to try knitting with beads: for beads, be sure to go with a hook and yarn. On the spot, try to see if the hook with the thread will pass through the bead.

Women's hat knitting. The work of Tamara Matus

Transformer hat “Taste of Raspberry” is knitted with two strands of half-woolen yarn Pekhorka “Crossbred Brazil” (composition 50% merino wool and 50% acrylic, 500m/100g).

Hat - turban with knitting needles. Svetlana's work

Knitting is my favorite hobby since the age of 7, I knit and crochet. I have a lot of work. So I decided to send you the work "turban". I knitted a hat for a friend, at first they came up with one option, there were threads left and decided to knit another option.

Hat knitting video tutorials

Fashionable hat made of thick yarn with cuffs

Hat - beanie knitting

The video should load here, please wait or refresh the page.

Knitted hat with a pattern “braid with a shadow 12 loops”

The video should load here, please wait or refresh the page.

Beanie with fashionable flaw knitting

The video should load here, please wait or refresh the page.

Two charming knitted hats with large pom-poms at the top

Knitted hats with pom-poms, description and diagram

How to knit hats with knitting needles: dial 95 loops on the knitting needles.
Join in a round if you want to knit in the round, or pick up two additional stitches if you want to knit in straight and reverse rows.
Start knitting with an elastic band with braids according to the pattern, repeat the pattern 5 times in width.
Decrease for the crown, start from the 55th row: on the sections of the purl loops, knit 2 together purl. 10 times along the row (once each side of the braid).
Repeat dec on each row until the end of the pattern.
On next row, work all sts 2 together in pattern.
Pull the loops that remain with the rest of the thread.

Details for the scheme:

Cross 2 persons / 1 out.-2 persons. left: remove 2 loops on an additional knitting needle, which you leave before work, knit 2 persons., 1 out. from the left knitting needle and 2 persons. with an extra needle.
Cross 2 persons / 2 persons. left: remove 2 loops on an additional knitting needle, which you leave before work, knit 2 persons. from the left knitting needle and 2 persons. with an extra needle.
Cross 2 persons / 2 persons. right: remove 2 loops on an additional knitting needle, which you leave at work, knit 2 persons. from the left knitting needle and 2 persons. with an extra needle.
Cross 2 persons / 2 out. left: remove 2 loops on an additional knitting needle, which you leave before work, knit 2 out. from the left knitting needle and 2 persons. with an extra needle.
Cross 2 persons / 2 out. right: remove 2 loops on an additional knitting needle, which you leave at work, knit 2 persons. from the left knitting needle and 2 out. with an extra needle.

Cross 2 persons / 1 out. left: remove 2 loops on an additional knitting needle, which you leave before work, knit 1 out. from the left knitting needle and 2 persons. with an extra needle.
Cross 2 persons / 1 out. right: remove 1 loop on an additional knitting needle, which you leave at work, knit 2 persons. from the left knitting needle and 1 out. with an extra needle.
Cross 1 person. / 1 ​​person. left: remove 1 loop on an additional knitting needle, which you leave before work, knit 1 person. from the left knitting needle and 1 persons. with an extra needle.
Cross 1 person. / 1 ​​person. right: remove 1 loop on an additional knitting needle, which you leave at work, knit 1 person. from the left knitting needle and 1 persons. with an extra needle.
Knit 2 persons together. left: remove the loop, 1 person., throw the removed loop on the knitted one.
Knit 2 persons together. right: insert the right knitting needle into the second, then into the first loops of the left knitting needle and knit them from left to right together with the front behind the front walls.
Knit double decrease: remove the loop, knit 2 persons together. to the right, then throw the removed loop over the knitted one.

If you like to create beautiful fashionable things with your own hands, then our article with a detailed description and diagrams on how to knit a hat for a woman is especially for you.
To be honest, today every woman must be able to knit, because there is nothing more pleasant than the opportunity to pamper yourself and loved ones with budget new clothes.

How to knit a warm hat with knitting needles for women?

If you are still a beginner, you can start with our first tutorial on how to knit a simple hat for a woman. As a visual aid, you can use the videos we have selected on how to knit a hat for a woman.

How to knit a simple hat from maher

Knitting a beautiful hat is not as difficult as it seems. To do this, arm yourself with knitting needles, yarn and patience.

Necessary:

• 125 g mohair
• knitting needles 4.5 mm

PP (patent loop) \u003d insert the right knitting needle into the next loop one row below (reset the loop of the current row).

Description:

Popular articles:

Cast on 75 stitches and knit in rib as follows:
1st row (RS): 2 knit, * 1 out, 1 knit; repeat from * to last stitch, k1.

Rib for 8 more rows, ending on a purl row.

1st row (RS): 1k, * PP, 1k; repeat from * to the end of the row.
2nd row (WS): 2k, *PP, 1k; repeat from * to the end of the row.
Repeat 2 rows of pattern until beanie measures 26 cm from cast on, ending on a WS row.

Top shaping:
1st row (RS): 1k, * PP, 3 out together; repeat from * to the last 2 loops, PP, 1 knit = 39 loops.
2nd row (WS): 1 knit, * 1 out, 1 knit; repeat from * to the end of the row.
3rd row (RS): *2knit together; repeat from * to the last loop, 1 knit = 20 loops.
Row 4 (WS): P1, 9 times, P1 (0) = 11 sts.

Beautiful hat for the winter from angora

Necessary:

• 120 g angora
• circular needles 5 mm
• stitch marker
• set of double pointed needles 5 mm
• knitting needle

Garter stitch: facial loops in each row.

Openwork pattern (the number of loops is a multiple of 7).
1 circle: facial loops.
2 circle: * 1 persons., 2 persons. together, yarn over, 1 person., yarn over, remove 1 p., 1 person. and stretch it through the removed item; repeat from * to the end of the circle.
3 circle: facial loops.
4 circle: * 2 persons. together, nakid, 3 persons., nakid, 1 p. remove, 1 persons. and stretch it through the removed item; repeat from * to the end of the circle.
Repeat 1-4 rounds. pattern row.

Description:
Cast on 84 sts on circular needles. Do not join in round, work in straight and reverse rows in 2.5 cm garter st. Place a marker at the beginning of the row and join in a round. Repeat 1-4 rounds. rows of openwork pattern 6 times.

Top shaping:
Switch to double pointed needles when the number of stitches decreases.
1 circle: * 10 persons., 2 persons. together; repeat from * to the end of the circle = 77 p.
2nd, 4th and 6th circle: facial loops.
3 circle: * 9 persons., 2 persons. together; repeat from * to the end of the circle = 70 p.
5 circle: * 8 persons., 2 persons. together; repeat from * to the end of the circle = 63 p.
7 circle: * 7 persons., 2 persons. together; repeat from * to the end of the circle = 56 p.
8 circle: * 6 persons., 2 persons. together; repeat from * to the end of the circle = 49 p.
9 circle: * 5 persons., 2 persons. together; repeat from * to the end of the circle = 42 p.
10 circle: * 4 persons., 2 persons. together; repeat from * to the end of the circle = 35 p.
11 circle: * 3 persons., 2 persons. together; repeat from * to the end of the circle = 28 p.
12 circle: * 2 persons., 2 persons. together; repeat from * to the end of the circle = 21 p.
13 circle: 1 persons., 2 persons. together; repeat from * to the end of the circle = 14 p.
14 circle: 2 persons. together; repeat from * to the end of the circle = 7 p.

Cut the thread, leave a long end. Insert the section into the knitting needle, pull through the remaining loops and pull off. Insert the thread from the set of loops into the needle and stitch in a garter stitch. Hide the remnants of the threads from the wrong side.

Warm grass hat

Necessary:

• 100 g yarn weed
• knitting needles number 6.

Description:
Start knitting by casting on 60 stitches on needles No. 6. Knit in rib 1x1 for about 4 cm.

In order to expand the circle, every 5 loops add 1 loop with a twisted crochet. Then knit straight for 5 cm, after which start decreasing 1 loop in each front row every 5 loops. Collect the remaining loops (there will be about 10 of them) with a needle on a thread folded in half, then fasten it.

The hat must be sewn with a knitted seam.
(On YouTube you can watch a video on how to knit a simple hat with knitting needles.)

How to knit a trendy hat

After you have learned how to knit simple hats, you can move on to more complex patterns. In 2018, the following models will be relevant: a voluminous hat, a hat with earflaps, a beanie (they are also called a hat-stocking, a sock, a cap), a turban, a bonnet (or a hat-helmet), a model with a visor, a hat with a pompom, double a hat, mischievous with ears, a regular one with a lapel, a snood hat (or a hat-hood).

Fashionable voluminous hat made of coarse yarn

Universal size 53-54 cm.

Necessary:

• thick yarn 200 g
• circular needles 10 mm, length 40 cm
• stitch marker
• thick knitting needle

Description:

Cast on 32 stitches. Place the marker at the beginning of the row and connect in a circle.
Knit with an elastic band as follows: * 2 persons, 2 out; repeat from * to the end.
Work 14 more rounds and dec 2 sts evenly, knitting 2 sts together in last round of stitching = 30 sts.
Next, knit 12 circular rows only with facial loops.

Track. Round: Knit 2 together = 15 sts.
Knit 2 more rounds. Cut the thread, leaving a long tail. Thread the piece into a knitting needle. Slip all loops onto thread. Pull and fasten the thread on the wrong side.

Universal hat with earflaps for a woman

Size - 54 cm (head circumference)

Necessary:

• 250 g yarn
• regular knitting needles 4 mm
  The hat can be knitted in 2 strands.

Ears:
Cast on 6 stitches and start knitting a hat in garter stitch. At the same time, add along both edges 6 times every 2 rows, 1 loop. Then knit straight for another 14 rows.

If you add more loops, then your eye will be much wider. If you knit more rows, then similarly your eye will be longer than in the photo. So, you have tied 2 identical ears.

HAT WITH EAR FLAPS:

Now we collect everything in one product. To do this, on a long knitting needle, type loops from your ears in turn and new ones for the front and back of the cap. Please note that at first the back of the cap will gradually increase and, as a result, will consist of two parts connected by a mattress seam. For a visual representation, look at the photo of the pattern.

Thus, you need to add 1 loop, knit with facial knitting (or any other, if you don’t want the option from the photo) the loops of one ear, cast on an additional 20 loops for the front of the hat, knit the second eyelet and cast on an additional 1 loop.

Continue knitting the hat with your pattern or front stitch, as suggested in the photo. At the same time, add loops to expand the back of the product in every second row on both sides of the knitted fabric 1 time for 2 loops and 1 time for 3 loops. This will be about 8 rows. This will be the full width of your header. If necessary, you can adjust it by adding more loops in the process of knitting.

You need to knit about 16 more rows, which will be the height of the cap before tapering at the crown.

Decrease as follows: 1 hem loop *, 5 knit loops, 2 loops with tilt to the right, 2 front loops, 2 loops with tilt to the left, 5 knit loops *, repeat from * to *, 1 chrome -i loop.
Dec 3 more times every 2 rows in this way, and slip off the rest of the sts after 2 rows. Sew the hat on the back with a mattress stitch.

For the front lapel, cast on 20 sts around the edge and work in garter st to the desired height. then close all loops and attach the lapel in any suitable way.

For braids, it is necessary to cut 18 threads 1 meter long, which are folded in half and threaded into the bottom of the ears and braided into braids.

Knitted beanie hat (hat-stocking, hat-sock, cap)

Necessary:

• circular needles 4 mm
• 200 g yarn of medium thickness
• tape measure

Description:

First of all, using a centimeter tape, measure the circumference of the head on which you plan to knit a hat. Let's say you got 56 cm. This means that you will knit a hat in size 56.

The second crucial step is to determine the density of knitting. What does knit density mean? This is the number of loops and rows needed to knit a 10x10 cm fabric. What does it mean in translation into “simple language” - correctly calculate how many loops you need to dial at the beginning of work.
Cast on 22 stitches and knit 10 cm with the pattern chosen for the hat.

Press the knitted pattern with an iron through a damp cloth. You don't need to smooth it out too much. Do this carefully, slightly "steaming" the sample.
Measure the prepared sample around the perimeter. Let's say you got a sample of 10x10 cm in size when knitting 30 rows. This means that the density of knitting with this pattern will be 2 loops per 1 cm and 3 rows per 1 cm.

That is, for a cap of the 56th size, you need to dial: 56x2 = 112 loops and knit 30 cm, that is, 30x3 = 90 rows.

Cast on the required number of stitches on circular needles. And knit in a circle, using the fishing line, the pattern chosen earlier, 25-27 cm up. You will get a knitted fabric in the form of a pipe. After 25 cm, start decreasing stitches by working 2 stitches together on every third row until you have 3 stitches left on the needle. When decreasing the loops, knit the fabric with a garter stitch. Break the thread from the skein, leaving about 10 cm, and pull it through the 3 remaining loops, knitting them together and securing the end from the wrong side.

Watch the video "tie a beanie".

Woolen hat-turban for the cold season

Necessary:

• 150 g wool yarn
• knitting needles No. 2.5 - 3

Knitting pattern: 1st row - 1 front loop, 1 wrong loop. 2nd row - before the purl loop, yarn over, and remove the purl loop without knitting, knit the front loops with the face. The 3rd and all subsequent rows - in front of the wrong loop of the yarn, remove the wrong one without knitting, and knit the front loop and the yarn of the previous row together (grab from above).
The cap consists of two parts: the turban itself and the bottom. The height of the turban is 10-12 cm.

Description:
Pick up the height of the turban, about 24 loops, and knit a strip, the length of which is equal to half the circumference of the head minus 2 cm.
Then divide all loops in half. Remove the left side on a pin and do not knit temporarily, and knit 4 more rows on the right side. After that, swap both parts so that the right part goes to the left and over the left part. Then put all the loops on one knitting needle and knit the second half of the strip.

If, when knitting the second half, there are two identical loops next to each other, then knit them together (so as not to knock down the pattern), and add one loop at the end of the row. When the desired length is knitted, close the loops.

Now pick up loops along the entire length of the strip and knit 7 - 8 rows with an English elastic band, then 2.5 cm with a 1x1 elastic band. After that, start knitting the bottom: 2 rows of double stocking knitting (front loops knit with the face, purl loops are removed, the thread remains before work). Then knit 2 loops together in the face, so that the front loop is on top of the wrong one. Knit 3-4 rows in plain stocking st, then across the face 2 rows in double stocking st, the next 1-2 front rows - 2 loops together. Pull off the remaining 6-8 loops. Steam the bottom through a damp cloth.

Video "Knit a turban with knitting needles for a woman"

The original hat-hat (or hat-helmet) for a very cold season

Necessary:

• 400 g of yarn
• knitting needles number 3

Description:
It is necessary to dial 31 loops on the knitting needles and tie a transverse strip of any knitting that you choose yourself for a frill 110 cm long, so that it has a beautiful and finished look, then make the corners on it with short rows.
In each row, be sure to decrease the knitted loops by 2, that is, first you need to knit 29 loops on the front side of the product, then leave 2 loops intact, wrapping around the 30th loop and turning the knitted product to the wrong side, then knitting the entire row to the end.

On next row from RS, also work 27 sts, leaving 4 sts intact.

Wrap around the 28th loop and turn to the wrong side again. Thus, knit the entire product.

Having stopped under-knitting all the loops of the corner, start knitting the main part, increasing the rows, which will make it possible to change the direction of knitting. First, knit three loops on the front side, and in subsequent rows increase the number of loops by 2, but only knitted.

Having connected the strip with the corners, on one side, dial about 180 loops along the edge loops and knit the product with a garter stitch. Then in the next row, every three loops remove one loop. Repeat these reductions 2 more times. Then work 5 cm in garter stitch.

After 5 cm for the main part of the hood, add evenly up to 90 loops and again knit another 17 cm in garter stitch. Then select 30 loops in the center and knit only them, grabbing and knitting together - both at the beginning and at the end - 2 loops from the central part on each side. After all the central loops are connected to the side loops, close the remaining loops.

Cap with a visor

Necessary:

• 250-300 g of yarn
• circular knitting needles No. 2.5
• silicone visor

Description:
Dial 80 loops, close in a circle and knit 4-6 rows with front stitch, i.e. face loops.

When I connect in a circle, leave the tail of the thread to indicate the beginning of the row. We divide the number of loops into three parts-18pet, 44pet., 18pet. On 44 loops we will knit a visor, making an increase of 10 loops every 4 loops. We make an increase so that the visor fits well and is conveniently located in its pocket.
When the pocket for the visor is knitted and the reductions are made, we knit the second half of the rim.

We fold the fabric in half, throw the tail of the thread onto the knitting face (the beginning of the row!). We knit one loop from the knitting needle, raise one and knit from the typesetting edge. We reach approximately the middle of the visor, insert the blank of the visor and continue to knit loops to the end of the row, i.e. to the tail.
The upper part of the rim (i.e. the front) should be a few rows larger than the inner (to hide the holes from the turns).

And so we have 160 loops on the knitting needles. You can start knitting the tulle. We divide the loops into 8 parts (wedges), and knit a zigzag pattern. One wedge-20 loops. Rapport - * from 1 pet. knit 3 loops, 8 persons., 3 loops together (behind the back wall), 8 persons. * - repeat 7 more times. If you want a larger cap, you can add 16 loops = 176 loops. One wedge - 22 loops. Rapport - * from 1 pet. knit 3 loops, 9 faces., 3 loops together (behind the back wall), 9 faces. * Repeat 7 more times.

We knit the height of the crown we need, knitting one row-pattern "zigzag", one row exactly.

Tula is ready. We start making cuts. One row is a zigzag, one row is exactly.
One row - we knit only 3 loops together, and we do not make 3 loops from 1 loop, one row is exactly.

When there are 16 loops left on the needles, knit 2 loops together and pull on a thread.
The cap is ready!

(Watch the video from the best needlewomen of the network " tie a hat with a visor "on the YouTube channel).

Stylish hat with pompom

The size is universal.
Necessary:

• 1 skein of yarn (75% acrylic, 25% wool; 136 m / 85 g) in three different colors: Oxford Gray (78046) - A, Steel Blue (78105) - B, Soft Teal (78209) - C;
• knitting needles 5.5 and 6 mm;
• auxiliary needle.

Knitting density:
15 sts and 20 rows = 10 cm in stockinette stitch on larger needles.

Legend:
K8P \u003d remove 4 loops on the auxiliary knitting needle at work, 4 persons, then 4 persons from the auxiliary knitting needle;
K8L \u003d remove 4 loops on the auxiliary knitting needle before work, 4 persons, then 4 persons from the auxiliary knitting needle;
+1 (inc 1 st) = pick up st from broach and knit in pos. wall.

Description:
On smaller needles with thread A, dial 73 loops and tie 7.5 cm with an elastic band 1 person, 1 out. Finish on purl row.

Switch to larger needles.
1st row (RS): knit with a thread In 3 persons, * + 1, 2 persons, +1, 3 persons; repeat from * to the end = 101 loops.

3rd row: 5 persons, * K8L, 4 persons; repeat from * to the end.
Rows 4 to 10: Start on a WS row and work in stockinette stitch (7 rows total).
11th row (RS): 1 knit, * K8P, 4 knit; repeat from * to the last 4 loops, 4 faces.
13th row: facial loops.
15th and 17th rows: Knit with thread C.
from the 19th to the 27th row: knit with a thread C and repeat from the 3rd to the 11th row again.
Row 28 (WS): Purl.

Top shaping:
1st row (RS): 1 knit, * 2 knit together, 3 knit; repeat from * to the end = 81 loops.
2nd and all purl rows: Purl.
3rd row: 1 persons, * 2 persons together; repeat from * to the end = 61 loops.
5th row: 1 persons, * 2 persons together, 1 persons; repeat from * to the end = 41 loops.
7th row: 1 persons * 2 persons together; repeat from * to the end = 21 loops.

Cut the thread, leaving a long tail. Using a needle, pull a segment through the remaining loops. Pull and fasten the thread. Run a seam.

Pompon:
Thread A in 2 additions, wrap the hand about 50 times. Leave a long line. Carefully remove the skein from the rugi and tie tightly. Sew the pom-pom to the top of the hat.

Watch the video on how to knit a hat with a pom pom:

Warm double hat for the winter

Necessary:

• circular knitting needles;
• favorite color yarn;
• soft yarn for lining;
• tape measure;
• scissors;
• hook.

In order to knit a double hat in your size, you need to know the girth of your own head. Determine it with a tape measure. Write down the total and calculate the loops for the set. The standard for which you need to knit a small square using a working thread will help you make the calculation correctly. Count the number of loops in one centimeter of the standard.

To knit the front of the hat, multiply this amount by the circumference of the head in centimeters and add 4-5 loops for supplies. For the lining, take the yarn created for knitting children's things. It does not prick and does not irritate the skin.

Description:
Type on two knitting needles, folded together, the required number of loops, pull out one of the knitting needles and start knitting gum.

The most reliable is the 1x1 gum. It stretches well and retains its original appearance for a long time. After knitting 5-6 cm of elastic, start stocking knitting. When knitting in a circle, it is better to knit the front loops by the front thread, so they turn out to be more even.

Knit the main part of the hat about 15 cm high. Next, start reducing. If you decide to knit a double hat on radial needles, divide the number of loops by 4, mark each part and knit 2 loops together first of each part. In this case, if knitting is done with a set of 5 knitting needles, knit 2 loops at the beginning of each knitting needle.

After all the loops are closed, fasten the thread on the wrong side of the hat with a crochet hook.

For lining the hat, cast on the loops from the wrong side of the main fabric, immediately after the end of the elastic band. Do not forget to reduce 4-5 loops. Knit in stockinette stitch. Knit the lining 1-2 cm shorter than the main part of the hat and close in the same way.
Wash knitwear by hand, in warm water, with special detergents for washing knitwear. It is necessary to wring them out without twisting, but to dry on a terry towel in a straightened form.

Hat with ears

Size 56-57.

Necessary:

• 150 g of yarn
• circular needles 4 mm

Description:
For the first “ear”, you need to dial 7 loops and knit in this order: 1Krom., 1IP, 1LP, 1IP, 1LP, 1IP, 1Krom.
2nd and all purl rows - knit according to the pattern.

As soon as there are about 21 loops on the needles, measure the length of the "eye".
If the length is suitable, then set aside, and proceed to knitting the second.
If not, then knit directly to the required length, but without adding loops.
Tie the second "ear" in the same way.

Then on circular or stocking needles (you can also knit on straight lines, but then there will be a seam along the back of the head, and the loops will need to be distributed taking into account this seam) cast on 33 loops, add 21 loops of the first “ear”, dial 33 loops again, add 21 loops of the second "ear".

Next, knit with a regular elastic band 1LP x 1IP for about 3-4 rows. See that the gum pattern is harmoniously distributed on the new typed loops.
Those. for the front and back of the hat, which consist of 31 loops, distribute the loops as follows:

7 elastic loops, 6 loops for the tourniquet, 7 elastic loops, 6 loops of the tourniquet, 7 elastic loops = 33 loops in total; for the “lugs”, each of which consists of 21 loops, distribute the loops as follows: 6 loops of the bundle, 1 PI, 6 loops of the bundle, 1 PI, 6 loops of the bundle = 20 loops in total. 1 loop carefully cut, i.e. knit 2 loops together without ruining the pattern.

Knit straight, repeat the rapport of the “harness” according to the scheme, about 14-16 centimeters.
Then start decreasing loops.
To do this, in every 4th row, evenly across the entire row, cut:
3 times 1/4 of the total number of loops

Check the height of the hat, if it fits, then pull off the remaining loops with the end of the thread and fasten them. As a rule, the height of a hat with ears can be from 20 to 22 centimeters. Perhaps someone likes a higher one.
If the height is not enough, then knit a few more rows in height, while reducing the existing loops, and close at the end.

For ties, attach pieces of yarn to the ends of the "ears". Approximately half as long as the desired length of the strings themselves. Take the yarn in several threads for three parts, which you then braid into a pigtail. This will be your tie. Tie a knot at the end and trim the yarn at the bottom of the tie with scissors.
Make a pom-pom for the crown.

Watch the video "how to knit a hat with ears for a woman"

Winter knitted hat with lapel

Size 56-57.

Necessary

• 150 g of yarn
• regular knitting needles number 5

Description:

The number of loops should be divisible by 4, plus 2 edge loops. If we knit for an adult, approximately 98 loops will be required: 96 + 2 = 98.
We collect the loops and start knitting the first row: we remove the edge loop without knitting, then the elastic band 2x2: 2 front loops, 2 wrong ones, we always knit the last loop of the row (edge) with the wrong one to maintain even edges of the product. The first loop of the row is always removed without knitting.

All further rows - both wrong side and front ones are knitted according to the pattern: 2 front loops over the front ones, 2 wrong loops over the wrong ones.
When the required depth of the cap is reached, taking into account the lapel option you have chosen, we begin to make decreases from the next front row: we knit 2 purl loops together with a purl loop.

In the second row (purl) we knit according to the pattern: 2 purl loops, 1 front loop.
In the third row, we decrease the facial loops: instead of two facial loops, we knit two loops together with the front loop. It turns out an elastic band 1x1: 1 facial loop of two facial, 1 purl.

Fourth row - according to the figure: 1 purl loop, 1 front loop.
The fifth row (front) is knitted together in two loops of the front.
And the sixth, final row - all the loops are purl.

As you can see, decreases when knitting a hat from a rectangle have the same principle as when knitting in a circle, there is only an adjustment for the front and back rows.

When knitting a hat from a rectangle, it is better to leave the tip of the thread longer so that there is enough for the back seam. We collect the remaining loops on it with a hook or a large needle, tighten it into a ring and carefully sew the hat. You can connect the edges of the cap in different ways (seams), this is a reason for a separate article, but the main goal in any case is to make the seam look equally neat both on the front side and in that part of the inside that, when turning off the edge of the cap, will be visible . Remember this!

That's all. We confuse, cut off the extra end of the thread and go to the fitting.
I wish you interesting work and warm hats!

If you need a visual example, watch the video how to knit a hat with a lapel on YouTube.

Hit of the season - snood hat

Necessary:

• 200 g of yarn
• circular needles number 5

First, decide on the width and length of the future product, and then tie a small piece of the knit that you prefer. Having chosen the fragment you like, you can calculate the number of loops for the product. So, type on the circular needles the required number of loops. The proposed snood must be knitted with a Polish elastic band. This knitting is not very difficult, and if you knit it for the first time - do not be afraid, you will adapt quickly enough.

The resulting chain of loops must be connected in a circle and knitted.

First row: 3 front loops and one wrong side.

Second row: two front loops, one purl, and one front loop.

Third row: knit in the same way as the first row.

Fourth row: knit in the same way as the second.
Then continue to knit in cycles. Do not forget that the wider the hat, the more effectively it can be laid on the head. |

Video "how tie a snood hat "will help beginners to learn in more detail the whole process of creating such a beautiful knitted creation.

How to knit a hat with a pattern

Hats with a pattern look spectacular, but knitting them is much more difficult, since you need to follow both the shape of the hat and the pattern. Sometimes you get lost and you have to start all over again. But if you pay attention and practice on a small sample, you will succeed the first time.

English ribbed hat

Necessary:

• woolen yarn - 50 g at 135 m;
• straight knitting needles No. 4 - 2 pcs.;
• knitting hook;
• scissors;
• darning needle.

1. Find out the circumference of the head of the future owner of the headgear and be sure to make a small square of the knitted fabric for the sample - the knitting density is always calculated individually. When knitting a hat with an English rubber band, an elastic, almost dimensionless, product is created. In the described example, with a head girth of 55-60 cm, a jersey density of 18 loops for 46 rows, 78 loops are dialed for the rim of the cap. Knitting needles are used straight, medium diameter (No. 4).
You can start knitting a hat with an English rubber band without making an elastic border-rim. At the same time, you can make a product canvas with or without a collar. Please note: 1x1 elastic band fixes the edge well!

2. Knit the headband in straight and purl rows, alternating 2 front and 2 purl loops in succession. When 8 rows are ready, start knitting a hat with an English elastic band. In the first row of the pattern, you will need to make uniform increases, bringing the total number of loops to 95.
To add loops, divide the row into equal segments, and in each knit with an additional thread bow. To do this, grab and twist the transverse threads between adjacent loops.

3. Perform a fluffy canvas with an English rubber band until you reach a height of 25 cm from the edge of the rim. To form the main pattern of knitwear, perform alternating loops in the following sequence. In the first row of the pattern, do only facial; start the second row with an edge loop (it is removed untied); do the front. Next, repeat the so-called double facial loops, inserting the right knitting needle into the thread bow of the previous row. Finishing loops - front and edge.

4. Start the third row of English Rib also with an edge loop, then alternate double and regular front loops until only a pair of thread arches remain on the left knitting needle. Knit the first of them double front, the second will be edge. Repeat the pattern according to the finished sample of the second and third rows until you make the main fabric of the headdress of the desired size.

5. Proceed to the formation of the crown of the cap. To round the knitted fabric and pull it off from above, make uniform decreases of loops in straight and reverse rows: at the beginning of the edge loop; during a row of 3, the thread arches are knitted together with the usual front; at the end - edge. On the next row, decrease without leaving edge stitches, always knit 3 stitches together.

6. Cut off the working yarn, leaving a “tail” about 10 cm long. Pull the open loops of the last row with it and drag it through the crochet inside the hat. Form a strong knot.

7. Turn the hat inside out, steam out the knitted fabric and carefully connect the side edges of the part. Sew a neat connecting seam with a darning needle and thread from a working ball. In order for the stitching to remain sufficiently elastic, and the product does not deform, do not make the stitches too tight.

Watch the video "how to knit a hat with an English rubber band"

Stylish hat with braids

Necessary:

• 150 g of yarn
• knitting needles number 3.5,
• knitting needles No. 4, 5

I knitted on two knitting needles, because on circular ones I have a large thread and it turns out to be very tight and there are large holes between the loops, and I like it tighter. Then I sewed it.
I scored 96 loops on the knitting needles. Knitting needles No. 3.5. Knitted in 2 strands, yarn with wool 20%, 135g per 50m.

I knitted an elastic band 2 × 2 about 6 cm.
Switched to knitting needles No. 4.5

Pattern:

• (2 out, 6 persons, 2 out, 2 persons) - repeat to the end of the row.
• knit according to the pattern, where there is out-out, where there are faces - faces.

Knit 6 rows like this and in the 7th row make overlaps where there are 6 faces. (Youtube is full of videos on how to knit braids). I did this: I transfer 3 loops to the toothpick, knit the next 3 knit ones, return these 3 loops from the toothpick to the left knitting needle and knit them too. So to the end of the row.

After these overlaps, we knit 1 row on the wrong side according to the pattern, I do not count it.

And repeat again all 6 rows, in the 7th overlap
And once again repeat all 6 rows and in the 7th overlap
In total, 3 braids were made. And from the beginning of knitting, about 15-17 cm were tied.

By watching in addition the video “how to knit a hat with braids for a woman”, you can easily master the science of knitting.

It would seem that there is nothing special in this hat, it is tied with an elastic band, two pompoms. But when I accidentally got on the website of a well-known online boutique and saw the price of 165 dollars, as you know, this hat grew in my eyes. I immediately wanted, so to speak, to touch the luxury, knit it for the evening and proudly wear 5500 rubles on my head

From words to deeds ... I quickly sketched a description for those who are not very good at knitting hats or do not know how, but really want to learn;).

I especially think that the places of reductions will cause difficulties for you, and I will also clarify this point.

And for starters, photos: rear view, close-up view.

And in white and black...

And a hat with two fur pom-poms.

Materials and tools:

• Thick yarn. It will take about 125 grams. Footage 100gr/100m
• Thick knitting needles no less than # 8. It is advisable to have hosiery or circular knitting needles, but if you don’t have any, and it’s easier to knit a hat as you like and it’s easier for you to work with straight knitting needles, knit on straight lines, you just have a seam on the back of your head. I don’t see anything terrible in it, before I just knitted and on store hats I often see this very seam.

Attention! Do not forget that when knitting in a circle, the front loops are knitted for the front bow, the purl loops for the back bow. If you knit in the usual way, then the canvas will definitely squint.

The width of the hat is about 48cm, the length is about 22cm.

How to knit a hat with two pompoms:

1. Cast on 48 stitches on needles and knit in 2x2 rib for approximately 23-25 ​​rows.
2. Decrease start in the 24th row. To do this, knit the purl loops 2 together.
3. Knit the next row without reductions: 2 facial, 1 purl.
4. In the 26th row, decrease the facial loops, i.e. knit two front together.
5. In the 27th row, knit again without decrease: 1 front, 1 purl.
6. At 28, make the reductions facial. The remaining loops are pulled off in the next row.
7. Cut two balls of yarn. See page
8. OK it's all over Now! Girls, there will be questions, ask in the comments. I'll try to answer right away.