Little roses crochet pattern. How to crochet a rosette-elastic band for hair. Master class for beginners with step by step photos. Step-by-step instructions for crochet roses

There are many things in the world that you can knit with your own hands. It just takes a little experience and patience. The work is interesting. You can knit not only clothes, but also accessories. One of the most popular additions to clothing is the rose. It is very easy to tie it yourself. If you decide to try your hand at such work, then the main thing is to prepare the material. A crochet rose decorates any look, and a knitting pattern will help you in your work.

Such a rose can be used not only as an addition to clothes. Attaching an elastic band, you get a hair ornament, it looks chic on a hat, and if you attach it to a sweater, it will turn out elegant.

Making a bright crochet rose with patterns

Before you get started, you need to remember: the outcome depends on the chosen yarn, hook, knitting density and the length of the air chain.

Each craftswoman has her own knitting density and completely different flowers can turn out. The article will describe how to crochet a beautiful and lush rose.

The very first step is knitting a chain of air loops. The length for a three-dimensional flower is about twenty centimeters.

Knitting of the second row: two columns, one yarn over in one loop, which is divided by three air loops. Double columns need to be knitted through one loop along the air chain.

Third row: two columns and one yarn, three air loops, two columns and one yarn in each loop of the previous row.

Start of row: seven columns with one crochet in each loop of the previous air row for six loops. Then knit seven columns with two crochets in each air loop of the previous row, so to the very end of the row.

Cut the end of the thread and fasten off. We collect the flower from the side where the petals were with one crochet. Spiral wrap it and sew.

So sew to the very end, and if necessary, sew on an elastic band for hair. A beautiful flower pleases the eye.

Create a beautiful rose for a vase

You can make an interesting decoration in the room or give it to a loved one. Crocheting any flower, and especially a rose, is an activity for persistent craftswomen who replenish their basket with new works.

You need to prepare yarn of any color. The size of the flower depends on the number of air loops. In our work we need sixty of them.

For further work, a diagram is attached:

After all the steps were knitted, a spiral was obtained.

You can take the threads to match or even a contrasting color will do, tie the edges. So the rose will have a more complete look.

Sew a spiral with threads in stages. It turned out a flower bud.

You need to tie a cup to the rose. This diagram will help:

In a cup, you can make a variety: make one petal small and the other larger.

Now tie the leaves. You can make both large and small ones (without knitting the last row).

A rose needs a stem. A straight stick will do. If you do not cut the knots, then leaves can be attached to them. Wrap the stick with green thread.

Having made the stem, we proceed to attaching the cup. It needs to be put a little on the stem itself, so that the cup holds better, and sew it on. We also sew the leaves.

We fix the bud on the cup and the gift is completed. You can make a bouquet of such roses and please someone. Flowers are very natural and natural.

Volumetric rose for beginners with a description

You can create a rose very refined and sophisticated. Before starting work, you need to study the schemes:

Using the first scheme, make three petals. We make the very first circle of loops tightly so that the hole is almost closed. Hide the initial thread, and make the one that remains long at the end. A rose will be attached to it.

Connect three petals according to the second pattern:

Connect four more petals according to the scheme number four.

And according to the fifth scheme, it is necessary to connect five petals.

The third scheme was created for the bud, to which all the petals will be attached. In it, the beginning of the air loops (the ring itself) should not be tight, so that later the stem can be inserted. Fill the bud with synthetic winterizer.

It's time to sew on the petals. Where there is a hole in the bud, it should be at the bottom. You need to sew in layers, based on the volume of the petals. You need to sew them in halves: half of the first petal, half of the second. Sew the remaining half of the first petal onto the second. Thus, sew on all three petals. It should look similar to the picture:

Attaching the remaining petals is the same. It is necessary to look carefully whether the petals lie down, try them on.

We turn to the creation of leaves and a stem. Cut two small pieces of wire and one larger one. Tie the leaves according to the already familiar pattern from the previous master class: two large, four small. Wrap small pieces of wire with green tape, and when a large wire is wrapped, then attach these wires crosswise to it.

Glue the leaves to the ends. Tie the sepals and assemble the work.

To create dew, stick a couple of beads.

Video on the topic of the article

For beginner craftswomen, it is better to use a video tutorial. They will describe the most elementary knitting steps, and a variety of videos can be used for ideas.

Knitted flowers can act as a decoration of clothes, for example, as a brooch, or be part of a product. Don't know how to crochet a rose? It is easy even for beginner craftswomen. With our step-by-step instructions and patterns, you will learn how to knit flowers using different techniques, different sizes and types. All you need is yarn, a crochet hook and a little time and patience.

We have prepared a description of 3 different ways of knitting flowers of varying complexity. Each of these descriptions can be regarded as a master class for beginner knitters who can knit air loops, stitches with and without crochet, and connecting stitches.

Simple crochet rose

This is an easy way to knit a rose especially for beginners. The flower is made with one canvas, followed by stitching. First you need to knit something similar to an openwork ribbon, and then collect it in the shape of a flower.

• First you need to dial 33 air loops (ch);
• In the first row we knit a double crochet from the 5th loop from the hook. *Then insert the hook through one loop from the first column and knit st. with a crochet (s / n), 1 vp, st. s / n *. Repeat between the stars until the end of the row;
• 4 vp, * 1 tbsp. s / n, art. s / n, 1 vp, 1 tbsp. s / n from the same loop. 1 st.s / n, 1 vp, 1 tbsp. s / n from the same loop *. We continue to the end of the row from * to *;
• 2 vp, st. without crochet (st b / n), * 8 st. s / n on 6 loops of the previous row, 2 st b / n, inserting a hook under the jumper *. We repeat from * to *.

Braid knitting pattern

Designations on the diagram:

• o - air item;
• T - Art. with a crochet;
• + - Art. single crochet

This completes the crochet rose. We got something similar to the braid, which now has to be collected into a rose. To do this, take a needle and thread, twist the braid in a spiral and fix it with a needle. Our flower is ready. Now it can be sewn onto a hat or, by attaching a pin to it, used as a brooch.

Tip for beginners: Crochet roses are best done with smooth and plain dyed yarn. Mohair or weed will give extra volume, and the rose will not look so impressive. And sectional dyeing yarn will make the flower too colorful.

Another way to crochet a rose

To make such a rose, you first need to separately connect the petals, and then collect them all together in random order. The number of petals depends on the size of the rose, but on average it is 15-20 pieces. The petals are knitted in 2 crochet stitches.

• We carry out 4 air loops. Crochet 3 tbsp. with 2 crochets from the first loop;
• We make a rise from 3 air. loops (then we start each row with this), one column, and then we knit 2 tbsp from each loop;
• 3 tbsp., 2 times 2 tbsp. from 1 loop, again 3 tbsp.;
• 4 tbsp., 4 times 2 tbsp. from 1 base, 4 tbsp.;
• 4 tbsp., 2 tbsp. from 1 loop, 6 tbsp., 2 tbsp. from 1 loop, 4 tbsp.;
• We knit with columns from each loop. We repeat this row again;
• We skip 1 loop, knit in columns to the end of the row, the last 2 tbsp. we knit with one top;
• 2 times we knit 2 columns with one top, 3 tbsp., One tbsp with one crochet, 2 tbsp b / n, 1 tbsp. with one crochet, 3 columns, 2 times 2 tbsp. with one top.

Rose petals can be the same color or different. After they are all connected, gather them into a flower and fasten them together. Start collecting from the center, twisting the inner petals into a bud shape. Straighten the outer petals.

If you don’t have anyone to take a flower knitting master class for beginners, our detailed instructions and patterns will help you cope with this task. Just be careful and act according to the description.

Circular crochet rose

In this method, the rose is knitted in a circle. This means that nothing needs to be stitched. At the end of knitting, you will get a finished flower.

Knitting begins with the fact that we collect 5 vp, we close them in a circle. Next, we proceed according to the scheme:

• In the first row we knit 7 tbsp. B / n, connect them, make 2 air loops;
• In the second row, first we knit 1 tbsp. B / n, then from each loop - 2 st.b / n to the end of the row, we connect the columns;
• 3rd row. 4 ch, 1 st b / n in the second loop of the previous row, 3 ch, 1 st b / n in the fourth loop. We continue to the end of the row, we knit the columns, introducing the hook into the even loops of the 2nd row. We finish the 3rd ch, we connect them with the ch from which we started;
• 4th row. We continue to crochet roses. On three vp of the previous tier we knit: st b / n, st s / n, st. With 2 crochets, st s / n, st. B / n. Repeat until the end of the row. So we have the first petals of the future rose;
• 5th row. On the first 3 loops we knit connecting posts. So we “get” to the top of the petal and start the fifth row from here: ch 3, st b / n on a column with 2 crochets, repeat to the end, connect;
• 6 row. St b / n, st s / n, 3 st with 2 crochets, st s / n, st b / n. In this sequence, we knit the petal further. It turned out the second row of petals;
• 7 row. Again we get the connecting posts to the top of the petal of the previous tier. On the middle column with two crochets we make st b / n, 5 ch, and so on;
• 8 row. Inserting the hook into the arch from the air loops, we knit: st b / n, st s / n, 5 st with 2 crochets, st s / n, st b / n. We continue in the same way to the end of the row. So we got the third row of rose petals.

By this principle, you can connect as many tiers of petals as you need.

Rose is ready.

If you are looking for information on how to crochet a rose with a step-by-step description, use our instructions or find a video on the topic.

Crochet roses are best knitted from yarn of medium thickness. If you take too thin, the flowers will not hold their shape well. Too thick yarn will make roses shapeless.

The composition of the yarn also matters. Viscose or silk is quite heavy. Crocheted rosette may turn out to be too soft and shapeless. It is best to knit flowers from cotton, linen, a mixture of wool and acrylic.

Where to use crochet roses? As a rule, they are used to decorate hats, sweaters, bags, make spectacular brooches. Sofa cushions, completely strewn with knitted flowers, look very original.

Here is such an elegant cover for a toaster in the form of a basket with roses that is very easy to knit.
True, you will have to work hard on a lot of flowers and leaves. But in this job you will hone your skills.
Later, you can tie the same heating pad on a teapot or a lid on a bread box.

You will need:

- brown yarn for basket
- green yarn for leaves
- red-pink-yellow yarn for roses.

Operating procedure:

1. First, measure the item for which you will knit this "clothes".
2. We knit the basket with a checkerboard pattern, where the alternation of flat and convex columns forms a texture resembling basket weaving (see photo).
"Flat column" - this is a double crochet, the hook is threaded from right to left in front of the leg of the column of the previous row.
"Convex column" - also a double crochet, but the hook is threaded from right to left behind the leg of the column of the previous row.
3. From the yarn of red, pink and yellow color scheme (see photo) we knit roses.
To do this, we collect a chain in which the number of loops should be a multiple of 4 and to lift, dial 3 more loops.
We turn the connected "paths" with roses.
4. We knit leaves from green yarn according to the scheme (see photo).
5. Finished flowers and leaves are fixed on the "basket".

I suggest you make such a rose.

the size of the rose will depend on the number of air loops. I cast on 60 stitches

a sort of spiral

after the edges are tied, we collect the resulting spiral into a bud, stitching the bottom edges

now let's start creating a cup. we knit it according to the scheme.

I knitted a little differently: I made the leaves long and short, alternating them.

if you do not knit the last row, the sheet will turn out smaller.
large leaf on the left, smaller on the right

now let's start creating the stem. I used an ordinary wooden stick, previously cleaned. knots can not be cut, then the leaves can be sewn on them.

in the same thread tightly wrap the stem

after the stem is ready, we sew the cup, after putting it on the stem, but not quite deep. so the bud will hold better.
now carefully sew the bud to the cup, then sew the leaves

the rose is ready

Here is a bouquet you can give. and not expensive and forever, such roses will delight the eye for a long time.

Rose crochet.

In this post, just gorgeous crochet. Such an unusual and beautiful composition will surely decorate any interior, and also bring a bit of individuality to the owners.

Today we will try to knit such a luxurious bouquet of white roses. Just like in a fairy tale! The size of the flower is 7 cm, and the buds are 2.5 cm.

To work, take creamy white yarn, hook number 1, plastic stems and starch. Knit flowers as shown in the detailed description: flower pistil, petal wreath A B C and D, bud and pistil and petal wreath to it.

Be sure to starch the flowers and turn them outside. Next, plant the flowers and buds on the stems and fix them well with stamens. That's it, you're done!

We wish you success. Your work will surely be crowned with success and such a bouquet will decorate your interior very beautifully.

We knit a beautiful voluminous Rose Crochet

Good day. Today I want to show you step by step crochet roses in pictures. The volume of the rosette depends on the number of loops cast on and, accordingly, the number of petals obtained, the thickness of the yarn.

In my example, a rose is used as a decoration for a headband, also crocheted. But you can use it as a brooch, for decorating clothes, interiors, etc.

The whole process of crocheting a rose takes me about an hour (26 petals). But again, if the number of petals is less, then it will take a little time.

Step-by-step instructions for crochet roses

1. The rose will consist of 26 petals, for this we crochet a chain of 52 loops.

2. We knit the second row.

To do this, we knit 3 lifting loops, in the 4th loop - a double crochet, then an air loop, * a double crochet into the next loop, air, a double crochet into the same loop, an air loop.

Repeat until the end of the row from *.

Thus, we kind of get the letters V.

3. We knit 3 lifting loops.

Then - double crochet, 3 air loops, 2 double crochets in the same arch V. * In the next arch V - 2 double crochets, 3 air loops, 2 double crochets.

Repeat from * knit to the end of the row.

4. We finish crocheting our rose. To do this, 3 lifting loops, then we knit 10 double crochets into each double V arch, so we get beautiful petals.

5. We twist the resulting ruffle as you like best and get such a beautiful and voluminous rose. Personally, I plan to make such a rose as a brooch for a knitted black cardigan or vest.

As I said, the more petals, the larger the flower itself.

I also crocheted such a rosette for a baby headband (for a 5-year-old girl). The bandage itself was performed with a single crochet. As you can see, everything is extremely simple.

She began to knit a rose with a white thread, and finished with a red one.

The back of the bandage is made in the form of a bow by means of uniform decrease and addition of loops in the crochet process.

This is the result you can get by spending a little time.

The scheme for the rosette is taken from a Chinese magazine. I knitted only the first two rows, and then simply tied the edge with a contrasting thread.

For a long time I had a stem from an artificial rose lying around, the flower from which has gone into oblivion (somewhere in the wilds of Olesya's next school project). I decided to tie a rosette and use this stem for its intended purpose.

Process. And the most important knitter

The rosette was knitted in a strip, then twisted and fixed with a needle and thread and a glue gun. I took this diagram as a basis.

The rose and the receptacle are crocheted of floss threads.

I continue to crochet flowers. I want to make a panel out of them sometime later.
Today I will show you a volumetric rose. Looks very nice and easy to knit.

We collect 76 air loops, then we knit according to scheme 1.

Then we twist the finished ribbon, giving it the shape of a rose, fasten it with a thread and a needle for strength, and that's it - the rose is ready.

Vase with roses. You will need: knitting threads (red, white, green), “Iris” threads, bobbin threads No. 30 white, ribbon for embroidery, sequins, hook No. 2.5; 1.5, PVA glue, wire for rose stems and gypsophila.

Buds. Petals knit from the center with double crochets according to the pattern of red (white, pink, yellow) thread. Only 7-9 petals, depending on the density of knitting and the desired size of the rose bud. You can knit a rose with different shades. Then collect the rose petals (stitching with a needle), starting with the darker ones and ending with the light ones.

Seme of knitting.
Legend:
○ - air loop
+ - single crochet
| - short column
† - single crochet
╪ - double crochet

Leaf. Knit the leaves according to the pattern with green thread. Ready leaves can be non-starched or poured with strong hold hairspray.

Cup. Tie five sepals with a green thread in single crochets according to the scheme: ch 3; 1st row: 1 tbsp.; 2-4th rr.: 2 tbsp.; 5-6th rr.: 3 tbsp.; 7th p.: 4 tbsp.; 8-9th rr.: 5 tbsp.; 10th p.: 4 tbsp.; 11th p.: 3 tbsp.; 12th p.: 2 tbsp.; 13th p.: 1 tbsp. At the end of each row, work 1-2 chain stitches.
Connect the sepals in the last row of Art. without a crochet, at the same time adding one air loop between them, close in a circle and knit in a circle with columns without a crochet 2-3 rows.
Wrap the wire, pre-lubricated with glue, with a green thread, while winding the rose leaves. Insert the stem into the sepal, securing it with PVA glue or a couple of hidden stitches in the color of the stem. Plant the bud on the glue in the sepals, for strength, you can also sew. Rose is ready.

We collect a bouquet of roses. It can be decorated with a sprig of gypsophila and a lace package. To do this, knit any large napkin you like with a small hole for flowers from Iris threads, starch it and, giving it the desired shape, dry it until it dries completely.

Gypsophila. Gypsophila can be done as follows. Tie 40-50 white flowers with #30 threads (40, 10). We collect 5 air loops and connect in a circle, then rise up * 5-6 ch, make a single crochet into a ring * and repeat this * action * 4 more times, break the thread. One gypsophila flower is ready. It remains to be patient and impose another 49. when all the flowers are ready, we collect them into a twig. To do this, take a thin wire and cut it 25-30 cm long. The number of wire segments depends on the number of colors. Then we stretch one end of the wire up to half the segment through the center of the flower and twist the wire (something like beadwork). Compose the required number of large branches from ready-made branches (the length of the branches and the distances between them are arbitrary), tightly twisting the ends of the wire together and placing the branches on a common trunk. The stems and the trunk were wrapped with bobbin threads of green color. Gypsophila is a wonderful addition to garden flower bouquets. Several branches can advantageously emphasize the beauty of a composition from one flower, give the necessary shape and volume to the bouquet. It remains to put the bouquet in a vase.

Any bouquet of flowers in your home will always give a good and festive mood.

Motif scheme

…

a chain of the required number of air loops (the longer the chain, the more magnificent the rose) and starting from the 5th loop from the hook, knit according to the above pattern.

calyx. Fold the green thread into a ring and knit an air loop for lifting from the resulting ring, 7 single crochets, a connecting column into the second loop for lifting. Tighten the end of the thread tightly and continue working according to the diagram.

To decorate handicrafts, many craftswomen use crochet roses. Schemes of such decorations, many of them come up with their own. Beginning needlewomen have to look for simple options that they could easily handle.

rose varieties

Before we carefully consider crocheting roses with patterns, first let's figure out what they are. The simplest are ordinary flat flowers, which often serve as the basis for round or square motifs. These products are often used as appliqués or elements of Irish lace.

Volumetric roses with several layers of petals are much more popular. From the first time, figuring out how to knit them is not easy. But, having mastered the main principles, you can begin to improvise and create your own "varieties" of these colors.

Roses are also used as patterns. This is most typical for fillet knitting. This technique has the most scope for recreating complex and detailed drawings. Knitting patterns and descriptions of which are in the collections of many craftswomen can be mastered in a couple of hours.

Snow-white volumetric rose

On the basis of a simple flower, you can knit a beautiful three-dimensional decorative detail. It consists of several layers.

The first stage of work - we knit a simple flower. We knit a self-tightening ring from 2 columns without a crochet. In the second row we make 6 arches from air loops. Their number can be arbitrary, but you should not do more than 5, so as not to greatly stretch the flower.

On the arches we form the petals themselves from and without. Approximate pattern: 1 single crochet, 2 single crochet, 1 single crochet, 1 single crochet. As you can see, the petal is symmetrical. You can experiment with the number of columns and crochets yourself. But the more you place them on one arch, the more voluminous the petal itself will turn out. This initial rose will turn out in the following steps.

When the first row of petals is ready, we do not break the thread, but on the wrong side we make 6 more arches of air loops so that they reach approximately the middle of the front row. We form the petals according to the same principle, but we make the columns a little larger, since the number of air loops has also increased. In this way, you can make up to 5 tiers. It won't be very pretty anymore.

square motif

In this way, not only flowers for application are created, but also bases for various motives. This is the joy that crocheting roses gives. Schemes of such motives were used by our grandmothers when

When the main flower is ready, it is tied with green yarn along the lower tier. For this, simple arches from air loops are used. On the four sides of the flower, imitations of leaves are made using lush columns or columns with a common top. It is desirable to make the next row with yarn of the third color, which will become the background. In this row, double crochets are made. In the corners where the leaves are located, the canvas expands due to the arch of the air loops.

An excellent basis for a plaid or scarf is such voluminous crochet roses. Patterns, knitting and assembly of the finished product do not require special skills from the craftswoman.

Another version of the square motif

In square motifs, crochet roses are quite often used as a basis. The scheme of work in them is always approximately the same. First, a finished flower is made, and then leaves and the main background are tied to it, which turns into a square.

In the variant presented here, the transition to a square shape is carried out using a simple mesh of air loops. This technique helps to maintain a square shape: at the corners of the workpiece, they are knitted not in one arch, but in two, as if turning the hook twice under one base.

The leaves in this scheme are made separately, and then sewn on. An example of a leaf can be as follows: we knit a chain of air loops and form 3 loops from it. Then we tie them with a single crochet in such a way as to grab the far edge of the loop and hide the hole that has formed.

Ribbon Rose

Consider another option that suggests crochet roses. Schemes of petals and leaves are extremely simple and understandable. She knits in one row. The essence of this whole method is that in the end you get a ribbon that folds and forms the flower itself.

We collect an arbitrary number of air loops. We knit the first petal from two columns with a crochet and two chains of air loops along the edges. Then we make one half-column and again we collect a chain of 3 v / p. We make 2 more columns with a crochet.

The third petal should be larger. Therefore, we increase the number of crochets and the columns themselves. Consequently, the number of air loops in the chain will also increase.

According to this algorithm, we knit an arbitrary number of petals. But it is worth remembering that too few of them will not give a beautiful bud, and too many will not form well into a finished flower.

We twist the rose

When all the petals in the ribbon are ready, the first step is completed, representing crochet roses. We will consider leaf patterns in the last step. And now we begin to form a flower.

To do this, we begin to twist the tape from a smaller petal to a larger one. At the same time, try not just to twist into a tube, but to form a bud. To prevent the “roll” from falling apart, periodically flash the bottom of the petals.

When the rose is assembled, sew the lower part thoroughly with the same yarn from which the flower is made.

Now you can start on the leaves. They knit extremely simply: at the base and at the tip we make single crochets, add a few double crochets to the middle, but not much, so as not to get a swollen barrel. We either sew the finished leaves to the rose or first sew them to the product, and attach the flower at the top.

Roses in the cells

The richest in patterns and pictures is loin crochet. Rose schemes in this technique are the most common.

You can write more than one article about how to knit sirloin flowers. Therefore, we recall only the main principles of technology. The patterns in it are built on the basis of "painting over" empty cells, as if drawing in a notebook.

The basis of the patterns is a double crochet, two air loops and a double crochet for empty cells and four double crochets for filled ones.

Rose schemes are made very simply: they can be copied from the finished product into the same notebook in a box. The example shown in the photo is a classic version of such a pattern.

The rose is called the queen of flowers. These magnificent plants adorn the holidays, they are woven into hair and threaded into buttonholes. Fresh flowers will stand in a vase or in a hairstyle for a very short time. But, created with your own hands, a rose will delight for a long time. Crocheted, a rose can be an excellent decoration for clothes, be an elegant brooch or hair clip. It can decorate a baby hat, scarf or handbag. Or you can tie the flowers, attach them to the stems and put them in a vase.

A very simple rose pattern for beginners.

Required:

• Yarn 2 colors (lilac and pink);
• Hook of the appropriate size;
• Needle;
• A thread;
• Scissors.

The flower will turn out more voluminous if you take thicker yarn.

Rose is ready. It will appear more open or closed depending on whether the front or wrong side of the knitting is rolled into a spiral. Such a flower will be an excellent decoration for hair clips.

Roses related according to this scheme, Can attach to the stem and put in a vase.

Required:

• Cotton yarn in different colors (260 m / 50 g);
• Hook #1;
• artificial stems.

The diameter of one flower will be approximately 5.5 cm.

Middle (pestle).

1. Tie a ring of 6 air. loops. All rows start with lifting loops and end with connecting posts.
2. First row. 9 st. without a crochet.
3. Second row. In each loop of the previous row, knit 2 tbsp. without a crochet. Only 18 st. without a crochet.
4. 3 - 6 rows knit similarly to the second row, behind the back wall of the loops.
5. 7 - 8 rows knit according to scheme 1 (3 reports are obtained in a circle).

Inner row of petals.

1. Start knitting from the 18th loop of the 5th row of the middle.
2. Knit 2 tbsp. with a crochet in every 3rd loop of the previous row. There are 24 loops in total.
3. Knit 2 rows according to scheme 1 (4 reports are obtained in a circle).

Middle row of petals.

1. Start knitting from the 18th loop of the 4th row of the middle.
2. Knit *2 tbsp. with a crochet with one base, 3 tbsp. double crochet *, repeat from * to *. There are 30 loops in total.
3. According to scheme 2, knit 3 rows. (in a circle of 5 reports).

The last row of petals.

1. Start knitting from the 18th loop of the 3rd row of the middle.
2. Knit in each loop 2 tbsp. with a crochet. There are 36 loops in total.
3. According to scheme 4, knit 6 rows. (in a circle of 6 reports).

Flowers can be starched and give the petals a twist, characteristic of roses. Attach to stems and place in a vase.

There are many types of roses in nature. You can knit cute terry rose.

It will take;

• Fluffy yarn for a flower (the remnants of threads containing wool will do);
• Cotton thread for leaves;
• Hook No. 1.5 and No. 2.5.
• Wire 2 types (thicker and thinner);
• Scotch;
• Scissors.

This rose is connected from individual petals.

Petal. Crochet with a large number.

1. Tie a ring of 4 air. loops (can be replaced with an amigurumi ring).
2. First row. Link 3 air. lifting loops and 12 tbsp. with a crochet in a ring. Finish the row with a connecting post.
3. Second row. Double the number of loops, knitting 2 tbsp. with a crochet with one base in each loop.
4. With threads of a darker color, tie * an arch of 4 air. loops, 1 tbsp. single crochet * in every second st. with a crochet from * to * 4 times.

Knit 8 of these petals. Connect overlap.

Sepal. Crochet in a smaller size.

1. Close in a ring a chain of 8-10 air. loops.
2. The first row and all subsequent ones start with lifting loops. Knit 9 tbsp. with crochets.
3. Second row. *2 tbsp. with a crochet with one base, 1 tbsp. with a crochet * repeat from * to * 4 more times.
4. Third row. * 2 tbsp. with a crochet with one base, 1 tbsp. with a crochet, 2 tbsp. with nakild with one base *. Repeat until the end.
5. Fourth row. * 2 tbsp. with a crochet with one base, 3 tbsp. with a crochet, 2 tbsp. with naikd with one base. Repeat from * to *.
6. Then knit each leaf separately. Only 5 leaves.
7. Knit 6 rows decreasing by 1 tbsp. with a crochet, by knitting 2 tbsp. double crochet with a common top.

Leaf. Leave the tail of the thread at the beginning of knitting about 10 cm long.

1. Link air. chain of 10 stitches
2. First row. 1 air. lifting loop. 2 tbsp. without a crochet, 2 half-columns with a crochet, 2 tbsp. with a crochet, 2 half-columns with a crochet, 1 tbsp. without a crochet, knit in the extreme loop (1 st. without a crochet + 3 air loops + 1 st. without a crochet. Knit the second half of the leaf in a mirror.
3. Second row. 3 air. lifting loops. 1 st. with a crochet in the same loop of the bottom row, 1 tbsp. with a crochet, 2 tbsp. with a crochet with one base, 7 tbsp. with a crochet, 1 half-column with a crochet, 1 tbsp. with a crochet, in an arch from air. knit loops (1 st. single crochet + 3 air loops + 1 st. single crochet), knit the second half of the leaf symmetrically.
4. From the left tail, tie a chain of loops in the middle of the front side.

Sew the flower and sepal. Bend a loop at one end of the thicker wire, tie a green thread to it, and fasten the rose on this hook. Wrap the wire with thread. Similarly, fasten the leaves on a thinner wire. Connect the entire structure.