Sweater with voluminous leaves knitted. Pullover with a pattern of large leaves. Beautiful red sweater with a round yoke with a collar
A warm and cozy sweater is one of the basic things in a woman’s wardrobe. You can knit a sweater using either light and delicate mohair, melange yarn, or warm wool yarn. Sweater models are very diverse. Women's goes well with skirts, trousers and jeans. Knitted sweaters for women with knitting patterns and a description of knitting can be found in our article.
Women's mohair sweater with cowl collar with diagrams and descriptions
This very beautiful model of a women's sweater is suitable for a girl, a young woman, or an older woman. The color can be chosen to suit your taste. We will now tell you how to knit a sweater for women of this model.
You will need:
- 350 gr. mohair (50g./250m.) – knit in two threads;
- knitting needles No. 3 and No. 5.
Size: 46/48.
Knitting density: 16p. x 19r = 10 x10cm.
Knitting technique: we knit a wave pattern in accordance with the diagram. Inside out yarn overs in purl knitting pattern. Repeat from rows 1 to 36. 
Description
We start knitting sweaters for women from the back. On the sp. No. 3 we cast on 83 pets. We knit the first row like this - 1 edge st., 3 l.p.*10 i.p.+3 l.p.* 4 times. Then we knit like this – 1 cr.st., 3 sts. purl stitch before rapport, *13 sts + wave pattern* five times, 1 cr.st. There should be six repeats in one row. The armhole is knitted like this - in the 93rd row we close off 5 loops on each side. Then cast off 2 stitches in every second row. 2 times, 1 loop twice. There should be 61 loops left. We continue knitting until row 136. Then we close all the loops.
We knit the front part of the sweater in the same way as the back. Only at 116 rubles. We begin to design the neck. To do this, you need to close the middle 13 loops and close 2 loops on both sides of these 13 4 times in every 2nd row. There should be 16 loops left on each side. In the 136th row, close all loops.
Let's start knitting the sleeves. Both sleeves are knitted in the same way. We cast on 44 loops. We knit the first row in the following way - 1 edge st., 3 lp*10 i.p+3 lp* 2 times. Then we knit like this - 1 cr.st., 3 sts. purl stitch before rapport, *13 sts + wave pattern* 2 times, 1 cr.st. There should be three repeats in one row. To expand the sleeves in the 10th r. From the beginning of the work, make an increase in the 1st stitch on both sides, and then every 10th row, increase the 1st stitch. 6 times. There should be 58 stitches on the needles. In order to get a sleeve roll, you need 84 r. make decreases - close 4 loops on each side, and then close every second row 1 time for 1 loop, nine times for 1 loop, and four times for 2 loops. There should be 12 loops left. At 114 r. close the loops.
All that remains is to assemble and tie the neck. Sew the sides and shoulders. Then we sew the sleeves and sew the sleeves into the armholes.
We knit a sweater with a collar. To knit it, you need to cast on 84 loops along the neckline and knit sp. No. 3 elastic band 1x1 seven rows. Then you need to change the sp. on No. 5 and continue knitting with an elastic band for another 43 rows. In 51st r. close all loops. A beautiful knitted sweater for women with mohair knitting needles is ready!
Delicate white sweater knitted from mohair with diagram and description
To knit a white sweater of this model, you only need yarn and knitting needles. Read the description about how to connect it.
Pink fashionable mohair sweater with openwork braids for beginners
Sweater knitted from melange yarn with patterns and descriptions for beginners
The front of a melange yarn sweater is knitted similarly to the back, but the neckline is knitted separately. To do this, at a height of 50 (51) 52 from the beginning of knitting, you need to close 8 (9) 8 central loops. Continue knitting each of the parts separately. Then in every second row, decrease 7 times on both sides, one loop at a time. The shoulders are knitted like on the back. At a height of 70 (71) 72 close the loops.
To knit sleeves, you need to cast on 5 needles 34 loops and knit 10 cm with an elastic band. Next we knit with stockinette stitch sp. No. 6. To decorate the bevel of the sleeves, you need to add 1 loop in every 14th row from the elastic 4 times, 5 times in 12 r. on the 1st loop and 6 times on the 1st stitch in every 10th row. After 45 cm from the beginning of knitting, we form the okat. To do this, 13 times in every 2nd row we make decorative stitches, decrease 1 stitch and cast off 2 stitches. 2 times. At a height of 60 cm, bind off 4 (6) 8 loops.
Product assembly. Sew shoulders and sides. Sew in the sleeves. Cast on 84 stitches along the neck line. Knit in the round with an elastic band of 18 cm. In every second r. make 1 yarn over from two knit stitches in the middle of the front neck. Next row knit according to the pattern. Your knitted stylish sweater made from melange yarn is ready!
Beautiful pink melange sweater
Original white women's knitted sweater with a round yoke with diagrams and descriptions for beginners
A very delicate white sweater with a round yoke will suit most girls and women. Read on to learn how to knit a stylish and youthful sweater. Knitting a round yoke is not particularly difficult, and at the same time it looks very feminine.
You will need:
- 750 gr. cotton and viscose yarn (120 m/50 g);
- straight and circular knitting needles with numbers 3 and 3.5.
Size: 44-46(48-50).
Description
The main pattern is knitted according to pattern 1. The placket pattern is 1 p. persons.p., 1 rub. purl loop. The yoke is knitted with the following pattern - pattern 2, knit circles, purl circles - we knit the loops in accordance with the pattern, and purl the yarn overs.
We start knitting the back of the sweater with a set of loops 98 (106) per sp. No. 3. Knit the next 7 centimeters with a 2x2 rib. In the last row of elastic, add 35 (37) stitches evenly along the entire length. Next we knit with the main pattern using knitting needles No. 3.5. Having knitted 32.5 centimeters from the beginning of the fabric, bind off 2 loops on both sides and then cast off 1 stitch 8 times. and 2 pets. alternately in each second row. When the length of the fabric reaches 39 cm, you need to put the loops aside.
The front part is knitted similarly to the back.
Knitting sweater sleeves begins with a set of 50 (54) stitches per sp. No. 3. Continue knitting with an elastic band for 6 centimeters. In the last row of elastic, add 29 (25) cm evenly. Using knitting needles No. 3.5, continue knitting with the main pattern, starting from the arrow in pattern No. 1. To create a sleeve bevel, you need to add 16 times one loop in every sixth row. Having knitted 40.5 cm from the edge of the part, you need to bind off two loops in each second row, alternately eight times, 1 stitch each. and 2 pet. There should be 83 stitches left on the knitting needles. Place the loops at a height of 47cm. We knit the second sleeve in exactly the same way.
Knitting a yoke begins with collecting all the postponed loops on a circle. No. 3.5. We knit the next row with knit stitches. Then touch the edge loops and knit two loops together 11 (12) times. Result – 361(380) pets. We continue knitting the yoke pattern. Having knitted according to pattern No. 2, we switch to circle knitting needles No. 3 and knit 2.5 centimeters with a strip pattern. In the fifth circle, evenly distribute the decreases - six times, 2 stitches each.
It is advisable to join the finished parts using a knitted seam.
Congratulations! An elegant women's white sweater with a round yoke is ready!
Beautiful red sweater with a round yoke with a collar
This red sweater with a round yoke and a wide collar looks very impressive. Red color suits girls and women with a bright appearance, most often brown-haired. But if red doesn’t suit you very well, then you can take threads of any other color. We suggest you link it according to the description.
Original white women's sweater with braids with patterns
Pink openwork original sweater
The pink openwork sweater is knitted with 4.5 knitting needles and wool yarn. The openwork pattern is knitted according to the pattern below.
Openwork sweater knitting video master class for beginners
Women's raglan sweater
To link a very popular one, watch this video.
The diagram below shows how you can knit raglan.
Ways to reduce raglan sleeves.
Reducing the loops using raglan sleeve needles.
Decorative decrease in raglan sleeves.
Beautiful gray raglan sweater with diagrams and descriptions
Green women's sweater with hood
A sweater with a hood of this model is ideal for walks, trips out of town and informal meetings, both for girls and women. Such a beautiful and original sweater with a hood and a beautiful pattern will become an indispensable item in your wardrobe.
You will need:
- 600-700 gr. Merino Air sheep wool yarn (130 m/50 g);
- knitting needles No. 4.5.
Size: 36/38 (40) 42/44.
Knitting an elastic band – 2 edge loops + loops multiples of 4. Knit rows – 1 stitch + 2 stitches + 1 stitch. Purl knit according to the pattern. The diagram shows only knits.r., and purl.r. knitted according to the pattern. We repeat the rapport between the edge loops. Pattern with braids (A) – loops are multiples of 4 and two edge loops. Knitting is carried out according to pattern No. 1. Repeat rows 1-4, complete rows 5-6. Pattern with braids (B) - loops in multiples of 8 and two edge loops. We knit according to pattern No. 2. We knit once 1-14 r. and repeat 5-14 rubles. Honeycomb (pattern) - loops are multiples of 4 and two edge loops, knit according to pattern No. 3 with 1-4 r.
Pattern A - the sequence is as follows: elastic band - 28 rubles, 34 rubles. pattern A, 74 rub. pattern B, 30(34)38 honeycomb pattern. Total 166(170)174 rows depending on size.
Pattern B - the sequence is as follows: knit 68 rows with an elastic band, 42 r. pattern A, 22 r. honeycomb pattern. Total 132 rows.
To knit the back of a sweater with a hood, we need to cast on 114 (122) 130 stitches. and knit with pattern A. After 40.5 centimeters from the beginning of knitting (this is approximately 110 rubles), we close eight loops on each side for the armholes. After 59 (60.5) 62 centimeters from the edge of knitting for bevels, close in every second row 7 (8) 9 stitches. at both sides. After 61.5 (63) 64.5 cm from the edge of the knitting, close the loops.
We knit the front part of the hooded sweater like the back, but to knit the neckline we use 55.5 (57) 58.5 centimes. we close the central 12 loops and finish the resulting two sides separately. To get a beautiful round neck, we close off 1 x 4.5 x 2 and 1 x 1 stitches in every second row. Focusing on the back, close the loops.
To knit the sleeves of a sweater with a hood, we need to cast on 58 (62) 66 stitches. and knit with pattern B. In each. in the eighth row we add one loop 13 times and in every sixth row three times one loop, in the subsequent eighth row one loop 1 time and in every sixth row one loop 1 time. After 49 centimes. (32 rows) from the edge of the product, close all loops.
Start knitting the hood from the left half. To do this, cast on 18 stitches. and knit with a braided pattern (A). Additionally, we cast on from the set edge for the side bevel on the right in every second row 4x6 and 4x7 stitches. and include them in the pattern. After 21.5 centimes. from the edge we close 1 st to round it inward on the right. and every 2nd row 4x1.4x2.1x3.1x4 stitches. After 29.5 centimes. put all the loops aside. Symmetrically knit the right side and connect the set-on loops with a knitted seam and connect the back seam.
We assemble the product. To do this, we sew the shoulders and sew the hood to the neck of the sweater. We sew in the sleeves, sew the sides and sleeves at the seams. Congratulations – your beautiful hooded sweater is ready!
Blue sweater with aran with description
A sweater with beautiful arans looks very impressive. We invite you to connect this simple model with arans. It is suitable for girls and women of any age.
To knit a sweater with arans, you need to learn how to knit them. From this video master class you will learn how to do this.
Pattern for a sweater or jacket – 1
Pattern for a sweater or jacket – 2
Pattern for a sweater or jacket – 3
Pattern for a sweater or jacket – 4
Similar sweaters were knitted here on aspen, there are a lot of useful things in the comments
http://club.osinka.ru/topic-158418?start=105
Here is a video with a detailed analysis of knitting leaves
Scheme of leaves with video
Here is a video of knitting such a sweater - size 46, lanagold classic yarn
Well, now, let's start selecting yarn and making calculations.
As I see it, this sweater can be knitted from a wide variety of yarns, the main thing is to knit a sample and calculate everything for your specific yarn, knitting needles and knitting density.
When calculating the quantity of a sweater needed for this, I relied on the information in this post, where a girl had already knitted such a sweater Http://www.stranamam.ru/post/12192503/
So, there was yarn 50g - 225 m, in two threads, consumption of 14 skeins (700 grams).
Thus, with a meter of 100 g - 225 m, the total length of the thread is 1575 meters.
Based on this calculation, it is possibleapproximatelyestimate how much yarn we need of different sizes:
yardage 100 g - 175 m (knitting in 1 thread), 50 g - 175 m (knitting in 2 threads) - total 900 g of yarn
yardage 100 g - 200 m (knitting in 1 thread), 50 g - 200 m (knitting in 2 threads) - total 800 g of yarn
yardage 100 g - 225 m (knitting in 1 thread), 50 g - 225 m (knitting in 2 threads) - total 700 g of yarn
yardage 100 g - 250 m (knitting in 1 thread), 50 g - 250 m (knitting in 2 threads) - total 650 g of yarn
yardage 100 g - 275 m (knitting in 1 thread), 50 g - 275 m (knitting in 2 threads) - total 600 g of yarn
yardage 100 g - 300 m (knitting in 1 thread), 50 g - 300 m (knitting in 2 threads) - 600 g of yarn in total
yardage 100 g - 450 m (knitting in 2 threads) - total 750 g of yarn
For this sweater I bought Superlambs Special Nako yarn (49% wool 51% acrylic), 100 g - 200 m, color like this, 181.
Now calculations
The top photo is my drawing.These are the measurements of the girl for whom the sweater is knitted, size 40-42.
The bottom picture is already in cm, what a sweater should be, according to my calculations...
I want to make the elastic tighter so that it holds the sweater a little, and it slouches a little on top. I added 5 cm to the overlap. I calculated the width of the fabric as follows: chest volume + 20% + 2 cm for stitching.
I’m not sure about the neckline yet, we’ll see as we knit.
Now we knit a sample. Girls, I highly recommend doing this! This will help avoid unnecessary work. Yes, maybe you’re lazy, you don’t want to wait until you knit it until it dries... but have mercy on yourself and your work!
My sample 
After we have washed the sample, we steam it (if the yarn allows) and now we can take measurements. I took measurements in a fixed form, as in the photo, that is, I stretched it a little. I was probably lucky with the yarn, because both before and after the second the sample sizes are the same.
Below are my calculations of the loops based on the sample sizes and measurements.
Well, now you can get started!
At the bottom I will have a 2*2 elastic band, then a pattern of leaves on a branch of 3 knit stitches, the leaves will be parallel to each other, I think it will be possible to fit 3 pairs of leaves. Knitting needles for elastic band No. 4, for main fabric No. 5
Based on the available patterns and the knitting pattern in the video above, I made a diagram of the leaf, enlarging it a little. The diagram shows only knit rows, purl rows are knitted according to the pattern. The second leaf is knitted in a mirror image.
Here's my start. Having knitted one repeat of leaves, I tried it on, everything agrees with my calculations, so I knit further
I immediately knitted one report, after finishing the leaf I started knitting a second one, but it seemed to me that they were spaced too widely. So I started knitting the second leaf on the 33rd row of the pattern (the one I drew with a pen). In the end it turned out what is in the photo, I liked it better length 27 cm. 
Here it is ready before!
I closed the neck according to the diagram below. Since the neck will be tied with an elastic band, its depth is suitable, well, I think
I closed the neck of the back using the same pattern, only I closed the loops not so deep, but higher.
I immediately made the sleeve straight, without widening, but it didn’t look very nice and was tight. That's why I made an extension.
For the sleeve, I cast on 32 stitches and knitted 13 rows with an elastic band. Then add loops up to 45 (27 - repeat, 9 purl on each side). And we knit three leaves.
And when the fourth sheet begins, its first row, this will be the first row in the following increase pattern:
We make increases on both sides (near the edge) in the following rows - 3,7,11,15,19,23,27,31,35,37,39,41. We knit a total of 45 rows and close the loops.
The next stage for me was the WTO. I washed parts of the sweater in cold water with shampoo, let the excess water drain off and dried them on a horizontal surface. Then I steamed all the parts, especially the edges because they will need to be sewn together.
Having sewn the two halves of the hangers on top, I began to tie the neckline.
Here are links to very beautiful and neat necklines, excellent MKs
Wonderful sweater from a craftswoman Pilipyan.
Used yarn Alize Lanagold 800 in 3 folds. Consumption is about 300-400 g. Circular and stocking needles No. 4.5 - 5. Needle for stitching parts. I made a description of a children's model for the age of 3 years; to knit such a sweater of a different size, you definitely need thicker yarn and all calculations need to be done for a different size.
We start knitting the sweater from the bottom up, from the elastic band to the neckline.
We cast on 102 sts. We knit a 2 by 2 elastic band about 7 cm in a circle. After 50 loops, I placed markers on both sides to clearly separate the front from the back. I drew the diagram of the leaves exactly the way I wanted to knit them. On the front, as well as on the back, I included 2 rapports (2 branches with leaves). Between the rapports in front it turned out to be 2 purls. loops. And on the sides of the sweater there are 4 purl. p. If you need a sweater a little wider, you can easily add a few loops in these places and the chest circumference of the product will increase. Next we knit according to the pattern to the desired size. All purl rows are knitted according to the pattern. When knitting this pattern in the round, it will be difficult to keep track of the pattern rows and purl rows. In fact, every second (i.e. even) row will be considered purl. This can be quite difficult for those new to knitting. In this case, I can advise you to knit the product in rotating rows, i.e. separately for the back, separately for the front and then sew it together. It will be easier.
25 cm from the bottom I divided the sweater into front and back. There is no need to knit the armholes of this sweater, that is, we just continue to knit straight, first the front part separately.
Approximately 6-7 cm from the division into halves we need to close the gate opening. To do this, divide the halves into 26 sts and close in the central part like this:
Row 1: decrease 4 stitches at the beginning of the row
2 r. and all even rows: purl (no changes)
3 p.: 3 sts at the beginning of the row
5 p.: 3 p. at the beginning of the row
7 p.: 2 p. at the beginning of the row.
Further the shoulder is straight another 4-5 cm.
We close the loops of the shoulder and knit the second half of the collar and the other shoulder. Here, when forming the collar, we do all the decreases in the same way, only we do the decreases at the beginning of the purl rows (even), and we knit the front rows (odd) simply according to the pattern. After this, we perform and close the second shoulder. The back is knitted in the same way, but we begin to close the collar 8 cm from the separation of the sweater halves.
After this, we connect the shoulder seams. Now you need to cast on the loops for the collar. Carefully cast on 68 sts along the edge of the armhole. Be careful not to pull the collar. We knit 3 cm with a 2 x 2 elastic band. Close elastically.
Sleeves. For them we cast on 28 stitches on stocking needles. In a circle we knit 5 cm with an elastic band 2 by 2. Then I knitted the second sleeve in exactly the same way and after that I transferred both sleeves to 1 circular knitting needle. I did this so that the entire pattern and all the additions could be knitted simultaneously on both sleeves. This is very convenient because you don’t need to remember or write anything down, and both sleeves are knitted exactly the same way. The disadvantage of this method is that constantly moving the knitting and changing the thread after each row - this greatly slows down the work process. As a result, I knitted a branch on top of the sleeve and it turned out to be 2 repeats in height. To widen the sleeve, you need to add 16 points. The increases are distributed evenly along the entire length of the sleeve and are made at the bottom of the sleeve, in an inconspicuous place. We close the sleeves and sew them to our first part. We hide the threads and the sweater is ready! The sweater turned out to be stylish and noticeable; already on the first walk, passersby complimented it! 
Dimensions
36/38 (40/42 – 44/46)You will need
Yarn (100% wool; 95 m/50 g) – 600 (650–700) g mustard yellow; knitting needles No. 5; circular knitting needles No. 5, 40 cm long; 1 auxiliary knitting needle; beads, sequins with a diameter of 6 mm and 15 mm and glass beads with a length of 12 mm and 30 mm.Patterns and schemes
Garter stitch
Knitting in rows in forward and reverse directions: front and back rows - front loops.Knitting in the round: alternately 1 p. facial loops, 1 r. purl loops.
Leaves pattern
Knit according to the given pattern in rows in forward and reverse directions. Read the facial rows from right to left. In purl rows not shown in the diagram, knit loops according to the pattern, unless otherwise indicated.Knit 1 time in the stitches of the pattern.
In height from 1st to 42nd r. perform 1 time, then from the 15th to the 42nd r. repeat 3 times, then perform 1 time from the 15th to the 40th row, while in the last repeat, starting from the 27th row, do not start a new motif, but knit on the middle 5 stitches (= 2 purl ., 1 p. remove, 2 p.) and perform increases (= knit 1 purl crossed loop from the broach). On the loops between them, knit in garter stitch.
Attention!
In the 40th r. (= purl row) knit 3 stitches together with a slant to the left, not purl, but knit. Knit 3 stitches together with a tilt to the left: remove 1 stitch, as in knitting, knit 2 stitches together, then pull the removed loop through the knitted ones.
Knitting density
17 p. x 32 r. = 10 x 10 cm, knitted in garter stitch with needles No. 5;from the 23rd to the 37th p. of the “Leaves” pattern = 13 cm, knitted with knitting needles No. 5.
Pattern
Completing of the work
Back
On needles No. 5, cast on 81 (87–93) sts with a double thread and then knit for the bottom bar with a single thread in garter stitch, starting from the front row.After 2.5 cm = 8 r. from the beginning of the garter stitch, continue the work, distributing the loops of the patterns as follows: edge, 14 (16–18) sts of garter stitch, 23 sts of the “Leaves” pattern, 5 (7–9) sts of garter stitch, 23 sts of the pattern “Leaves”, 14 (16–18) stitches in garter stitch, edging.
After 26 cm = 84 r. from the cast-on row, make on both sides for armholes according to the mark and continue working as before (see also the description of the “Leaves” pattern in height).
After 48 (49–50) cm = 154 (156–160) r. from the cast-on row, close on both sides for shoulder bevels, first 4 (6–8) sts, then in every 2nd r. 6 more times, 4 p. = 25 (27–29) p.
Simultaneously with the 4th shoulder decrease, leave the middle 19 (21–23) stitches for the neckline and finish both sides separately.
To round the neckline, close from the inner edge in every 2nd r. 1 time 2 p. and 1 time 1 p. (all loops are closed).
Before
Knit as for the back, but for a deeper neckline, lower the last two motifs in the “Leaves” pattern in the middle and after 46 (47–48) cm = 148 (150–154) r. temporarily leave the middle 15 (17–19) sts.Finish both sides separately and, to round the neck, close from the inner edge in every 2nd r. 1 time 2 p. and 3 times 1 p.
Perform the shoulder bevel as on the back.
Finish the second side symmetrically.
Sleeves
On needles No. 5, cast on 44 (48–52) sts with a double thread and then knit with a single thread in garter stitch, starting from the front row.At 8 p.m. From the cast-on row, add 1 stitch on both sides for bevels, then in every 8th row. 14 more times, 1 p. = 74 (78–82) p.
After 44 (45–46) cm = 140 (144–148) r. From the cast-on row, close all the loops in one row.
Knit the second sleeve in the same way.
Assembly
Pin the details onto the pattern, moisten and leave until dry.Sew shoulder seams.
On circular needles No. 5, transfer the remaining 19 (21–23) sts of the back and 15 (17–19) sts of the front and between them along the edge of the neck, cast on another 24 sts = 82 (86–90) sts. Knit in the round garter stitch binding and after 3 cm = 9 r. close the loops.
Sew side seams to marks. Sew the sleeve seams. Sew in the sleeves. Fasten the ends of the threads.
Embroider the front of the pullover with beads, glass beads and sequins, as in the photo or at random.
Photo: Burda magazine. Knitting" No. 1/2017
Fashionable knitted pullover from the 2017 autumn-winter collection of Massimo Dutti (cost 6,990 rubles). The pullover is knitted with a pattern of large leaves on the reverse stitch.
The original is made of mixed yarn containing 40% cotton, 33% acrylic, 15% wool and 12% alpaca.
The description is compiled for sizes 44-46.
For knitting you will need approximately 550-600 g of light bulky yarn.
Knitting density: 12 stitches and 20 rows = 10x10 cm after light steam treatment with 6 mm knitting needles.
For knitting you will also need: straight knitting needles 5.5 mm and 6 mm; circular knitting needles 5 mm (length 40 cm); auxiliary knitting needle; marker; knitting needle.
The pullover is knitted in separate pieces, which are then sewn together.
Before
Cast on 61 stitches on 5.5mm needles.
1st row (RS): slip 1 stitch (edge), *k1, p1; repeat from * to last 2 stitches, k1, k1 (crown).
2nd row (IS): slip 1 st (edge), *p1, k1; repeat from * to last 2 stitches, p1, k1 (crown).
These 2 rows form an elastic band. Work with an elastic band for approximately 4 cm, finishing on a purl row.
Switch to 6 mm knitting needles.
Track. installation (RS): slip 1 p (chrome), P12, PM, 15 stitches pattern with leaves, PM, P7, PM, repeat 15 stitches pattern with leaves, PM, P12, k1 (chrome).
Perform 4 repetitions of the leaf pattern. Finish on the 24th purl row of the pattern.
There will be 26 loops left on each side.
Knit a purl row.
Cast off 2 stitches at the beginning of 3 knit rows. Knit 2 more rows and bind off the remaining 20 right shoulder stitches on the purl row.
From the wrong side, attach the thread from the neckline to the left shoulder. Cast off 2 stitches at the beginning of 3 purl rows. Knit 3 more rows and loosely bind off the stitches in the front row.
Back
Cast on 61 stitches on 5.5mm needles. Work with an elastic band as on the front for about 4 cm, finishing on the wrong side.
Track. row (RS): knit the first 23 loops, bind off the central 17 loops, knit 23 loops.
Knit a purl row. In the next front row, bind off 3 loops, knit 2 rows and bind off the remaining 20 loops of the left shoulder.
From the wrong side, attach the thread from the neck to the right side. Cast off 3 stitches, finish row.
Knit 3 more rows and bind off loose loops in the front row.
Sleeves
On 5.5 mm needles, cast on 29 stitches and knit with a 4 cm elastic band, ending on a purl row.
Continue as established, making the leaf pattern. Add 1 stitch on both sides in the 7th row, then in every 10th row 3 times, then in every 8th row 3 times, then in every 6th row 4 times (total 11 stitches on each sides). Finish the sleeve on the 12th purl row of the leaf pattern (at its widest part) = 65 stitches. Loosely close the loops.
Knit the second sleeve in the same way.
Completion
Lightly steam the parts.
Sew shoulder seams.
Neck trim
From the front side, attach the thread to the left shoulder and on 4 mm circular needles, evenly raise 84 loops along the neckline. Place a marker at the beginning and join the row into a circle. Knit 2 knits, 2 purls with an elastic band about 6-7 cm and bind off all the loops according to the pattern.
Sew side seams and sleeve seams.
