Scarf snood in finished form will have a width of 25 cm and a length of 60 cm. If you want a high pipe, then just increase the number of vertical rows, the knitting does not change from this.

The diagram and description shown are for use yarn with a thickness of 50-60 m in 50 g. This yarn will take about 300g. A thinner and lighter snood with a small, elegant pattern will be obtained from yarn with a density of 80-100 m in 50 g. Do not forget to increase the number of loops by a multiple of 10 (this is the width of our pattern report) so that the snood does not turn out too short.

To knit a tube scarf, you will need circular knitting needles No. 6 and No. 7. Knit a small pattern first. The density of knitting is different for everyone. If you knit loosely and the fabric is too loose, take smaller needles, if too tight, then more.

On circular needles No. 6, dial 180 loops, connect into a ring and mark the beginning of the row with colored thread. Knit in a circle.

Work 6 rows in garter st (knit row, purl row). Such a border will not allow the scarf to curl into a roll.

Then knit another row of facial loops. For the next row, take the knitting needles No. 7 and tie another row of facial ones.

Let's move on to knitting. Work as many rows as needed to achieve the desired width.

Knit a symmetrical border to finish the scarf-pipe: a row of knit on the same needles, a row of knit on smaller needles (no. 6). Next, 6 more rows of garter stitch and close the loops in any way you know.

Steam the finished product slightly so that the pattern becomes better visible.

Pattern scheme:

Text: Anna Gerasimova.

A trumpet scarf will perfectly fit into any, even a strict look, if you choose smooth woolen yarn for it. Knit a trumpet scarf with a light Fish Skeleton pattern in just a couple of evenings!
pcs2 (640x434, 262Kb)
Snoods, scarves, collars and pipes quickly seized power over the minds and necks of our girls. In addition to looking stylish, they are also very comfortable because they do not have ends that could come loose and dangle without control. I am also pleased with the fact that the scarf-pipe knits with knitting needles very easily and quickly. Spend a few soothing evenings knitting, and a warm new thing is ready!
The warmest scarf will be made from wool yarn. It can be thick decorative, boucle, mohair. A discreet and elegant trumpet scarf for a strict wardrobe is made from smooth wool yarn. Why not decorate it with a simple knit and purl pattern? We suggest you knit a scarf-pipe "Fish Skeleton". This pattern is very simple and does not require much knowledge in knitting techniques.
pcs. .
The above scheme and description are designed for the use of yarn with a thickness of 50-60 m in 50 g. This yarn will require about 300 g. A thinner and lighter tube scarf with a small, elegant pattern will be made from yarn with a density of 80-100 m in 50 g. Do not forget to increase the number of loops by a multiple of 10 (this is the width of the report of our pattern) so that the snood does not turn out too short.
pcs3 (640x391, 81Kb)
To knit a tube scarf, you will need circular knitting needles No. 6 and No. 7. Knit a small pattern first. The density of knitting is different for everyone. If you knit loosely and the fabric is too loose, take smaller needles, if too tight, then more.
Let's start knitting a scarf-pipe with knitting needles!
1. On circular needles No. 6, dial 180 loops, connect into a ring and mark the beginning of the row with colored thread. Knit in a circle.
2. Work 6 rows in garter st (knit row, purl row). Such a border will not allow the scarf to curl into a roll.
3. Then knit another row of facial loops. For the next row, take the knitting needles No. 7 and tie another row of facial ones.
4. We turn to knitting a pattern. Work as many rows as needed to achieve the desired width.
5. Knit a symmetrical border to complete the tube scarf: a row of knit on the same needles, a row of knit on smaller needles (no. 6). Next, 6 more rows of garter stitch and close the loops in any way you know.
Steam the finished product slightly so that the pattern becomes better visible.
Scarf-pipe knitting pattern "Fish Skeleton" is ready! Wear with pleasure!

01.05.2015

Relief patterns spokes - this is an alternation when knitting front and back loops, while the fabric turns out to be three-dimensional due to the combination of convex and concave sections, and also quite dense (without gaps), so such patterns are especially expressive. There are a great many relief patterns, they differ in small or large rapport. These patterns are ideal for plain cotton, cotton-viscose, silk and linen blends. If the yarn is thick, then the pattern looks especially embossed, and if it is thin, then an exquisite, noble structure will be obtained. Embossed patterns are quite easy to knit, so they are recommended for beginners, because. help them gain skills and experience. Confident knitters also pay attention to embossed patterns, because they are convenient to combine with openwork and give it a special elegance. So that the charm of relief patterns does not disappear, they should not be ironed and steamed, it is enough to moisten and let them dry in a straightened form.

We offer you a large collection of simple patterns with embossed zigzags and waves for knitting with patterns, diagrams, descriptions and symbols.
Choose and create with pleasure!

Attention! Pattern schemes are shown as they look from the front side.

Abbreviations:
p. - loop;
persons. - front;
out. - purl;
chrome - edging;
cross - crossed.

Pattern 44 "Horizontal zigzag from columns"(for 24 loops and 28 rows)

Pattern 43 "Wavy relief-2"(for 16 loops and 16 rows)

Pattern 42 "Wavy relief-1"(for 24 loops and 16 rows)

Pattern 41 "Rep zigzag"(for 10 loops and 10 rows)

Pattern 40 "Double Zigzag"(for 19 loops and 20 rows)

Pattern 39 "Abracadabra"(for 20 loops and 24 rows)

Pattern 38 "Steps"(for 16 loops and 28 rows)

Pattern 37 "Zigzag with triangles"(for 20 loops and 26 rows)

Pattern 36 "Spikes"(on 9 loops and 22 rows)

Pattern 35 "Firs-sticks"(for 22 loops and 24 rows)

Pattern 34 "Dunes"(for 4 loops and 8 rows)

Pattern 33 "Ripple"(for 4 loops and 8 rows)

Pattern 32 "Zigzags and diamonds"(on 8 loops and 32 rows)

Pattern 31 "Zigzag with option"(on 8 loops and 32 rows)

Pattern 30 "Three textures"(for 10 loops and 18 rows)

Pattern 29 "Combined zigzag"(for 18 loops and 20 rows)

Pattern 28 "Herringbone"(for 16 loops and 8 rows)

Pattern 27 "Chevrons 4x4"(for 10 loops and 16 rows)

Pattern 26 "Chevrons 3x3"(for 12 loops and 12 rows)

Pattern 25 "Waves"(on 6 loops and 6 rows)

Pattern 24 "Original zigzag"(for 18 loops and 16 rows)

Pattern 23 "Romantic zigzag"(for 18 loops and 24 rows)

Pattern 22 "Zigzag of squares and rhombuses"(on 8 loops and 22 rows)

Pattern 21 "Zigzag of diamonds"(on 13 loops and 16 rows)

Pattern 20 "Pearl zigzag"(for 10 loops and 8 rows)

Pattern 19 "Wide ribbon zigzag"(for 10 loops and 18 rows)

Pattern 18 "Narrow ribbon zigzag"(on 8 loops and 16 rows)

Pattern 17 "Pylon dance"(on 9 loops and 18 rows)

Pattern 16 "Snake"(on 9 loops and 24 rows)

Pattern 15 "Zigzag paths"(on 9 loops and 30 rows)

Pattern 14 "Structural bend"(for 7 loops and 22 rows)

Pattern 13 "English Diagonal"(for 4 loops and 12 rows)

Pattern 12 "Embossed zigzag"(on 14 loops and 18 rows)

Pattern 11 "Structural zigzag"(for 22 loops and 28 rows)

Pattern 10 "Sea surf"(for 6 loops and 12 rows)

Pattern 9 "Vertical zigzag"(for 6 loops and 12 rows)

We knit shawls Ivanovskaya T.V.

Fishtail shawl

A beautiful pattern in the form of openwork corners resembles the tail of an exotic fish. Such a shawl is best knitted from fine plain yarn with the addition of mohair.

You will need

300 g of yarn (80% acrylic or wool and 20% mohair), knitting needles No. 4.

Progress

The shawl is knitted in the form of a rectangle. Cast on 102 loops on the needles, knit 4 rows in garter stitch and then continue to work with an openwork pattern as described.

1st row - 1 edge loop, * purl 1, 1 yarn over, 3 front loops, knit 2 loops together with the front one, knit 2 loops together with the front crossed, 3 front loops, 1 yarn over *, repeat from * to * 9 times, 1 purl stitch, 1 edge stitch.

2nd and all even rows - between the edge loops, knit according to the pattern.

3rd row - 1 edge loop, * purl 1, 1 front loop, 1 yarn over, 2 front loops, knit 2 loops together front, 2 loops knit together front crossed, 2 front loops, 1 yarn over, 1 front loop, 1 purl loop, 1 edge loop.

5th row - 1 edge loop, * purl 1, 2 front loops, 1 yarn over, 2 loops knit together front, 2 loops knit together front crossed, 1 front loop, 1 yarn over, 2 front loops *, 1 wrong loop, 1 edge loop.

7th row - 1 edge loop, * 3 front loops, 1 yarn over, 2 loops knit together front, 2 loops knit together with the front crossed, 1 yarn over, 3 front loops *, 1 wrong loop, 1 edge loop.

To form a pattern in height, repeat

1-8th rows. Work 200-220 cm in piece, work 4 rows in garter st and loosely cast off all sts in one row.

From the book We knit shawls author Ivanovskaya T.V.

Shawl-stole with check pattern A beautiful shawl knitted with an openwork check pattern will warm you in the cool season if it is knitted from warm woolen yarn. For a more elegant and elegant option, you should choose a thin yarn with the addition of viscose. You

From the author's book

Shawl-stole with a pattern of leaves A chic stole for spring or autumn is knitted with a beautiful pattern of leaves. Such a thing will look great with solid yarn, but especially with sectional dyed yarn. You will need 500 g of yarn (50% acrylic, 30% wool and 20%

From the author's book

Peacock feather shawl The beautiful peacock feather pattern looks best when section dyed. Such a stole is perfect for any outfit. You will need 400 g of yarn (50% acrylic, 30% wool and 20% mohair), knitting needles No. 5. Work progress The shawl is knitted in

From the author's book

Shawl-stole with a relief-openwork pattern The pattern of this shawl is quite light and at the same time gives a beautiful relief fabric. Any yarn is suitable for this model - both in composition and in color. You will need 450 g of yarn (100% acrylic), knitting needles No. 4.5. Shawl

From the author's book

Shawl-stole with a pattern of "openwork tubercles" A beautiful openwork pattern, which also has a double-sided surface, will look great on shawls made of dark fine yarn. You will need 300 g of yarn (100% acrylic), knitting needles No. rectangle,

From the author's book

Shawl-stole with a pattern of long loops The original pattern, which gives a beautiful embossed fabric, will look great on a voluminous stole made of pure wool. You will need 400 g of yarn (50% wool and 50% acrylic), knitting needles No.

From the author's book

Twisted Leaves Shawl Stole A surprisingly beautiful pattern that is perfect for a tippet made of fine yarn with mohair. The pattern looks good in any color. You will need 450 g of yarn (80% acrylic and 20% mohair), knitting needles No. 4. Progress of work The shawl is knitted in

From the author's book

Shawl-stole with a pattern of "counter leaves" The pattern of leaves, each of which is located towards each other, as a whole forms a very beautiful canvas. A chic stole connected with such a pattern will become an indispensable accessory for evening dresses. You will need 450 g

From the author's book

Shawl-stole with a pattern of "leaf and openwork" A very beautiful pattern, which is visible in all its glory on a rectangular shawl. It will look especially impressive on a stole made of plain yarn. You will need 450 g of yarn (100% acrylic), knitting needles No. 3.5.

From the author's book

Shawl-stole with an “openwork branch” pattern Along the entire canvas of a rectangular shawl, beautiful openwork branches wind, if desired, the finished product can be embroidered with beads or sequins. You will need 450 g of yarn (80% acrylic and 20% mohair), knitting needles No. 4.5. Progress of workThe shawl is knitted in

From the author's book

Basket pattern shawl A charming stole is made using a beautiful pattern and sectional dyed yarn. Also, to achieve the original color scheme, each row can be knitted with yarn of a different color. You will need about 350 g of yarn (100% acrylic),

From the author's book

Salute shawl A beautiful pattern that is best done with a thick hook made of fine yarn to make the shawl more airy and light. You will need 200 g of yarn (80% acrylic and 20% mohair), hook number 4. Move workThe shawl is knitted in the form

From the author's book

Square pattern shawl The original square pattern is perfect for creating an elegant stole shawl, which can be made in any color yarn - solid, section dyed or melange. You will need 300 g of yarn (50% acrylic and 50%

From the author's book

A shawl with a pattern of "medals" A chic shawl with a pattern of "medals" will look great from yarn of any color and composition, the main thing is to choose a thin thread. You will need 350 g of yarn (100% acrylic), hook No. rectangular canvas,

From the author's book

Shawl-stole, made with a pattern of "barberry" A surprisingly beautiful shawl-stole is knitted with a pattern of lush columns resembling barberry berries. For this model, a single-color thread of a light shade is perfect, and from sectional dyeing yarn, the thing will be

From the author's book

Shawl-stole with a pattern of "fluffy fans" A shawl-stole, connected with this pattern, will look elegant if you take yarn with Lurex or viscose. For a warmer and cozier option, it is better to use a wool blend yarn. You will need 450 g of yarn (80% cotton and 20% viscose

Snoods, scarves, collars and pipes quickly seized power over the minds and necks of our girls. In addition to looking stylish, they are also very comfortable because they do not have ends that could come loose and dangle without control. Also encouraging is the fact that scarf-pipe knitting knits very easy and fast. Spend a few soothing evenings knitting, and a warm new thing is ready!

The warmest scarf will be made from wool yarn. It can be thick decorative, boucle, mohair. A discreet and elegant trumpet scarf for a strict wardrobe is made from smooth wool yarn. Why not decorate it with a simple knit and purl pattern? We offer you "Fish Skeleton". This pattern is very simple and does not require much knowledge in knitting techniques.

A trumpet scarf that we suggest you knit on knitting needles, in finished form will have a width of 25 cm and a length of 60 cm. If you want a tall pipe, then just increase the number of vertical rows, the knitting does not change from this.

The diagram and description shown are for use yarn with a thickness of 50-60 m in 50 g. This yarn will take about 300g. A thinner and lighter tube scarf with a small, elegant pattern will be made from yarn with a density of 80-100 m in 50 g. Do not forget to increase the number of loops by a multiple of 10 (this is the width of the report of our pattern) so that the snood does not turn out too short.

To knit a tube scarf, you will need circular knitting needles No. 6 and No. 7. Knit a small pattern first. The density of knitting is different for everyone. If you knit loosely and the fabric is too loose, take smaller needles, if too tight, then more.

Let's start knitting a scarf-pipe with knitting needles!

1. On circular needles No. 6, dial 180 loops, connect into a ring and mark the beginning of the row with colored thread. Knit in a circle.

2. Work 6 rows in garter st (knit row, purl row). Such a border will not allow the scarf to curl into a roll.

3. Then knit another row of facial loops. For the next row, take the knitting needles No. 7 and tie another row of facial ones.

4. We turn to knitting a pattern. Work as many rows as needed to achieve the desired width.

5. Knit a symmetrical border to complete the tube scarf: a row of knit on the same needles, a row of knit on smaller needles (no. 6). Next, 6 more rows of garter stitch and close the loops in any way you know.

Steam the finished product slightly so that the pattern becomes better visible.

Knitted trumpet scarf with the Fish Skeleton pattern is ready! Wear with pleasure!

More