Knitting for women mesh pullover. Beautiful mesh jumper with openwork inserts. Description of knitting a mesh pullover

Hello, dear friends!

I bring to your attention a mesh knitted women's jumper with openwork inserts. I saw this elegant openwork jumper while flipping through the Sabrina magazine.

The description of the openwork jumper is given for SIZES: 36/38 and 40, translated into ours - 42/44 and 46 (the last size is indicated in parentheses).

Knitting a women's jumper

To knit a mesh jumper with openwork inserts you will need:

450 (500) g of Fiorino yarn in camel color (100% merino wool, 120 m/50 g);
knitting needles No. 4.

Of course, in the absence of this particular yarn, you can choose some other one, the main thing is that it matches KNITTING DENSITY, and here she is like this:

average density: 21 loops and 26, 5 rows - 10 x 10 cm;
“Mesh” pattern: 21, 5 loops and 28 rows - 10 x 10 cm.

Description "Mesh" pattern, used to knit this jumper, is located.

The diagram of the openwork pattern with leaves is below. In addition to these patterns, when knitting an openwork jumper with knitting needles, the front stitch is used (on the front side you need to knit with facial loops, on the back side with purl stitches).

Knitting pattern “Strip of leaves”

"A strip of leaves" can be used either in combination with other openwork patterns or as a stand-alone pattern (it has a beautiful jagged edge).

To knit a sample of this pattern, you need to cast on the number of loops that are a multiple of 19 and add 2 more edge loops. Next we will knit according to the pattern.

Scheme of the pattern “Strip of leaves”

The diagram shows only the front rows, in the purl rows we will knit all the loops and yarn overs purl, only 2 We will knit yarn overs in a row like this: 1 purl and 1 purl crossed, as in the “Mesh” pattern.

Knitting back and front

cast on 93 (101) loops and knit after the edge like this:

1 front, 1916 (20) loops with a “Mesh” pattern,
19 loops with the “Strip of Leaves” pattern,16 (20) loops with a “Mesh” pattern,
19 loops with the “Strip of Leaves” pattern, 1 front, edge.

Having knitted 40 (38.5 cm), or 106 (102 rows) from the beginning of knitting, we will close 4 loops for the armholes on both sides and then decrease 1 loop 5 times in each 2nd row.

After 58 cm (154 rows) from the beginning of knitting, we will close off the remaining 75 (83) loops. In this case, the middle 51 loops form the neckline, and the outer 12 (16) loops on each side form the shoulders.

Knitting sleeves

We cast on 54 (62) loops in a crosswise manner and knit with a “Mesh” pattern of 37 cm (104 rows).

in every 2nd row - 3 times 1 loop;
in every 4th row - 7 times 1 loop;
in every 2nd row - 2 times 1 loop, 1 time 2 loops and 1 time 3 loops.

After 53 cm (148 rows) from the beginning of knitting, we will close off the remaining 14 (22) loops.

Product assembly

We will sew the shoulder seams, sew in the sleeves, sew the side seams and sleeve seams.

Mesh knitted women's jumper with openwork inserts is ready! All that remains is to actually link it.

If you liked this jumper or have any questions regarding knitting it, write, I will be glad to communicate with you!

I would also be glad if you subscribe to receive new articles from my blog by email (unless, of course, you want to miss something important for yourself).

And this is Yuri Vizbor and his wonderful, slightly sad song “My Darling”. Listen, my dears!

Spring is just around the corner, so we offer this delicate shade of the first leaves. Mesh creates a spring mood. Scheme and pattern for knitting a pullover on knitting needles.

Dimensions: 32/34, 36/38, 40/42, 44/46 and 48/50
You will need: 650/700/750/800/850 g yellow yarn Schachenmayr CATANIA GRANDE (100% cotton, 63 m/50 g); knitting needles No. 4 and No. 4.5.

Elastic band 1/1: knit alternately k1, p1.

Facial surface: persons R. - persons p., out. R. - purl P.

Main pattern: knit according to the pattern. Persons R. read from right to left, purl. R. - from left to right. Start with chrome. before rapport, repeat 2 points of rapport, finish with edge. after rapport. Repeat 1st and 2nd rows.

Decrease 1 p.: from the right edge of the edge, knit 3, 2 sts together, knit 2, from the left edge 2 stitches together (= remove 1 st as a knit, knit 1 and pull it through the removed loop), knit 3, chrome

Decrease 2 p.: from the right edge of the edge, knit 3, 3 stitches together, from the left edge 3 stitches together with a broach (= remove 1 stitch as a knit, 2 stitches together and pull the resulting loop through the removed one), 3 persons, chrome

Knitting density, main pattern, knitting needles No. 4.5: 19 p. and 20 r. = 10 x 10 cm.

Back: on knitting needles No. 4, cast on 80/90/98/108/118 sts and knit with 1/1 rib, starting with 1 purl. R. and after chrome. from purl 1, knit 1. After 6 cm, continue knitting on needles No. 4.5 with the main pattern, while doing 39/44/48/53/58 repeats in a row.

At a height of 37 cm from the start of work, close 2 sts on both sides for the armholes and knit as follows: edge, 4 sts. satin stitch, 66/76/84/94/104 sts of the main pattern, 4 sts. iron, chrome

For raglan bevels in every 2nd r. decrease 17/18/20/22/24 times alternately by 1 or 2 p. (see instructions for decreases), for this in the 2nd p. decrease 1 p. and in the 4th p. 2 p. At a total height of 55/56/58/60/62 cm, the remaining 26/32/34/38/42 p. can be loosely closed.

Before: knit as for the back, but for raglan bevels, decrease every 2nd r. only 14/15/17/19/21 times alternately 1 or 2 p. according to the instructions for decreases. At a total height of 51/52/54/56/58 cm, close the remaining 34/42/44/48/52 stitches freely.

Right sleeve: on knitting needles No. 4, cast on 52/54/56/58/60 sts and knit with 1/1 rib, starting with 1 purl. R. and after chrome. from purl 1, knit 1. After 6 cm, continue knitting on needles No. 4.5 with the main pattern, while performing 25/26/27/28/29 repeats in a row.

For sleeve bevels in the 13th row. from the bar, add 1 p. on both sides, then in each 18/14/10/8/6th r. another 2/3/4/5/8 x 1 p. and in every 16/12/8/6/4th p. another 1/1/2/3/2 x 1 p. = 60/64/70/76/82 p.

After 49/48/47/46/45 cm from the start of work, close 2 stitches on both sides and continue knitting as follows: edge, 4 stitches. iron. 46/50/56/62/68 sts of the main pattern, 4 sts. iron, chrome

Then for raglan bevels in every 2nd r. decrease 14/1517/19/21 times alternately by 1 or 2 p. according to the instructions for decreases, for this in the 2nd p. decrease 1 p. and in the 4th p. 2 p. = 14/16/16/16/16 p.

Then close from the right edge in every 2nd r. 1 x 3/4/4/4/4 p., 2 x 2 p. and 1 x 3 p., from the left edge of the decrease for the raglan bevel, perform 3 more times. All loops will be closed.

Left sleeve: knit symmetrically to the right sleeve.

Assembly: sew raglan seams, side seams and sleeve seams.

Sizes: 34/36,38/40 and 42/44. Differing data for sizes 38/40 and 42/44 are given in parentheses, sequentially separated by a dash. If there is only one number, then it applies to all three sizes.

You will need: yarn (58% merino wool. 38% silk. 4% polyester: 150 m/50 g) - 500 (550-600) g black: circular knitting needles No. 6 and 10, 80 cm long: circular knitting needles No. 6, 40 cm long.

Rubber: alternately 2 knits and 2 purls.

Facial surface: front rows - front loops, purl rows - purl loops.

Mesh Pattern: knit according to the given pattern. Read the front rows from right to left; in the purl rows not shown in the diagram, knit purl loops. After chrome. repeat 2 points of rapport between the arrows, ending with the edge. Repeat in height from the 1st to the 4th row.

Knitting density: 10 p. x 16 r. = 10 x 10 cm. Knitted in a mesh pattern using knitting needles No. 10.

Attention: The product is knitted in 2 threads.

Back: With a double thread, cast on 70 (74-78) sts on needles No. 6 and knit with an elastic band, starting from the purl row: edge .. 1 knit .. 2 purl .. finish the row symmetrically. After 4 cm = 11 r. from the beginning row 2 p. knit with knitting needles No. 10. then in the 1st r. evenly decrease 10 stitches. To do this, knit 2 stitches together = 60 (64-68) stitches on knitting needles. Continue working with a mesh pattern. After 40 cm = 64 r. from the elastic make on both sides for armholes according to the mark. Continue knitting at a height of 20 (21-22) cm = 32 (34-36) r. from the marks, close the middle 28 (30-32) stitches for the neckline and finish both sides separately. To round the neckline, close from the inner edge in every 2nd r. 2 more times, 1 p. At a height of 68 (69 - 70) cm from the bottom edge, bind off the remaining 14 (15-16) p. shoulder. Finish the second side symmetrically.

Before: 5 cm shorter and 4 cm wider than the back. Therefore, in the finished product, the shoulder seams are shifted toward the front, and the side seams toward the back.

Using a double thread, cast on 74 (78 -82) sts on needles No. 6 and knit with an elastic band, starting from the purl row: knit 1, purl 2, finish the row symmetrically. After 4 cm = 11 r. from the beginning row 2 p. knit with knitting needles No. 10. at the same time in the 1st r. evenly decrease 10 stitches. To do this, knit 2 stitches together = 64 (68-72) stitches on knitting needles. Continue working with a mesh pattern. After 40 cm = 64 r. from the elastic make on both sides for armholes according to the mark. Continue knitting at a height of 13 (14-15) cm = 20 (22-24) r. from the marks, close the middle 28 (30-32) stitches for the neckline and finish both sides separately. To round the neckline, close from the inner edge in every 2nd r. 1 more time 2 sts and 2 times 1 st. At a height of 63 (64-65) cm from the bottom edge, bind off the remaining 14 (15-16) sts of the shoulder. Finish the second side symmetrically.

Sleeves: cast on needles No. 6 with a double thread of 32 stitches and knit with an elastic band, starting from the purl row: edge, k1, purl 2, finish the row symmetrically. After 3 cm = 7 r. from the beginning row 2 p. knit with knitting needles No. 10. at the same time in the 1st r. decrease 10 sts evenly. Continue working in a mesh pattern. B10 (10 - 8th) r. from the elastic band, add 1 st for bevels on both sides, then in every 10 (8-8th) p. another 5 (6-7) times 1 p. = on knitting needles 44 (46-48) p. After 43 cm = 68 r. From the elastic band, close all the loops in one row. Knit the second sleeve in the same way.

Assembly: Pin the details onto the pattern, moisten and leave until dry. Sew shoulder seams. Using short circular needles No. 6, cast on 76 (80-84) stitches along the edge of the neckline and knit 6 rows in the round. with an elastic band. Then close the loops. Sew side seams and sleeve seams. Sew in the sleeves, placing them slightly at the top of the collar.

Openwork knitting boasts innumerable and inexhaustible variety. There are so many patterns and variations nowhere else. It is impossible to remember all the patterns. It would seem, how can you diversify the appearance of the grid? The grid is just that: a grid. But that was not the case, there are many options for the mesh pattern and each has its own nuances. Change the scheme a little, and before your eyes there is already a completely different openwork mesh - for example, a dense mesh, or a large lattice. Every craftswoman must know several patterns of openwork knitting, because what kind of openwork you choose will ultimately determine how exactly the knitted pullover or sweater will look.

Option #1

Repeat of three loops, plus edge loops.

Description of mesh knitting from three repeats:

Cast on nine stitches, plus two edge stitches.

remove the edge;
*knit three faces;
insert the left knitting needle into the first knitted one and throw it on the second and third knitted ones;
yarn over;
repeat with *;
knit the edge purl.

knit everything purl.

remove the edge;
one person ;
yarn over;
knit three faces;
the first of three persons. throw on the second and third;
repeat with yarn over;
two persons;
The edge is knitted purlwise.

purl everything.

Repeat the rapport from the first row.

Option No. 2

The number of loops is a multiple of four, plus two edge loops.

Example for 16 loops

knit according to the pattern.

remove the edge;
*two persons together;
two yarn overs;
remove one loop unknitted onto the right knitting needle, knit the next one and pull the previous one through it;
repeat from * to the end of the row.

knit according to the pattern, knit yarn overs.

one person;
* purl two;
two crossed;
purl two;
repeat from * to the end;
finish persons and edging.

according to the drawing.

according to the drawing, capes for faces.

The special charm and great popularity of mesh is that it can be used in absolutely any type of sweaters, jumpers, pullovers and it doesn’t matter whether it’s a summer or winter item

Pullover mesh

The pullover is knitted quickly, which brings additional pleasure from the work.

To knit sizes 38-42 you need:

seven skeins of thread, 50 grams each, two hundred meters each skein (composition: 85% cotton, 15% acrylic);
knitting needles: No. 45; No. 5 and circular No. 4.5;
centimeter.

Types of matings:

facial surface;
purl stitch;
grid pattern.

Grid diagram

2 loops tilted to the left (slip the first unknitted knitting stitch onto the right knitting needle, knit the second knitting needle, pull the first through the second);
2 yarn overs;
Knit 2 together.

yarn over;
2 knits together;
two facial ones with a slant to the left;
Yarn over

facial;
purl three.

on knitting needles No. 4.5, cast on 110 loops;
Knit 1 - 1.5 cm in purl stitch;
take knitting needles No. 5, knit 3 rows;
switch to a mesh pattern and knit 47 cm;
for the neck, leave 24 loops open in the center;
in each 2nd row, cast off 4 loops once and two loops once;
53 cm from the beginning of knitting, close the shoulder loops.

Before:

knits like the back;
knit 44 cm to the neckline;
leave 16 central loops open;
in every second row, bind off four loops once, then two once, then one three times, and after four rows bind off another loop.

Sleeves:

Cast on 42 stitches on circular needles;
Purl 1 cm;
switch to needles No. 5 and knit three rows in stockinette stitch;
switch to grid pattern;
knit 34 cm.

Assembly:

sew both parts;
sew in sleeves.

Neck:

Open neck loops are knitted in the round using 1.5 cm stitch.

Summer openwork half-over (with short sleeves)

For size 42-44 you need:

thread 200g, 400 meters (composition: 100% cotton);
knitting needles No. 4.

Mesh Pattern Scheme:

2 persons together;
2 yarn overs;
2 persons together.

knit according to the pattern;
Yarn overs are knitted like this: the first yarn over is purl, the second yarn over is knitted behind the back wall.

yarn over;
2 knits together;
2 knits together;
Yarn over

purl all;
Knit yarn overs as in the second row.

cast on 76 loops + 2 edge stitches;
knit two rows in stockinette stitch;
then knit in openwork stitch - 34 cm.

Sleeve set:

Neck:

Knit 40 sts according to the pattern;
close the next 38 p.;
knit the remaining 40 stitches and turn the work;
when knitting a shoulder, to round the neck, make nine decreases one loop at a time, leaving the shoulder loops open;
repeat the same with the second half of the product

knit the loops of one half and cast on the number of all closed loops, then knit the second half (there should be 78 +20+20 on the knitting needle);
continue knitting with the main openwork pattern;
knit the second half of the sleeve and close (in the front row close the loops of one sleeve, and in the wrong row close the stitches of the second sleeve);
knit with a mesh pattern to the end (34 cm);
finish with two rads of stockinette stitch.

Sew side seams and sleeve seams

Tie the collar of the pullover in any favorite way

Original pullover

The originality of a pullover begins with the knitting method. It should not be knitted from bottom to top, but from sleeve to sleeve. The sleeves are very wide, which gives a regal look to the wearer of the pullover.

For knitting you will need:

thread 100g/400m (composition: viscose);
knitting needles No. 2.5.

Main pattern:

1р: facial;
2 r: purl;
3 p: purl two together; one yarn over, to the end of the row;
4 r: purl;
5 r: facial;
6 r: yarn over, knit two together.

The front and back are knitted the same way:

Cast on the number of loops so that the width is 35 cm and knit 140 cm with the main pattern.

Knit the upper and lower cuffs with a 2×2 elastic band.

upper cuff (length - 50 cm, width - 8 cm);
lower cuff (62 cm and 10 cm).
cuffs can be knitted directly with the main fabric or knitted separately and connected to the main product

Openwork knitting is always fashionable and will remain so. Suitable for any age. Always relevant because things look feminine and elegant.