Scarves baktus women's knitted patterns. Openwork bactus (shawl) knitting soft peach color. Video: Warm knitted scarf

Little girls love to repeat after their mothers so much, they begin to pay attention to fashion much earlier than boys and try to imitate adults. Therefore, if your child does not want to wear an ordinary scarf, then offer an original children's bactus with knitting needles. It will warm the neck in the cold, and will look more original. To make a girl stylish, you just need to learn how to knit a bactus with knitting needles, the description of which is given below, and stock up on threads.

You will need:

– yarn (70% acrylic, 30% wool, 500m/100g);
- knitting needles No. 4.

Knit will be according to the following description:

We knit the first row of facial, before the last loop of the yarn, and then the front;

Second: front loop, front crossed, all other front loops to the end of the row;

Third: knit 2, *yo, knit 2 together* and repeat from ** to the last loop. The last loop is the front;

In the fourth row, all facial;

We knit the fifth row, like the first.

We knit the sixth row, like the second.

7 and 8 rows - facial loops.

Thus, we knit to the middle of our bactus for a girl.

And then at the end, instead of yarn over, knit 2 loops together until there are 4 loops on the needles.

We close them. Here is such a wonderful children's bactus with knitting needles for a baby with a size of 24cm * 121cm.

An unusual mini-shawl or an asymmetrical bactus breakwater scarf is both a stylish accessory and another original piece in a fashionista's wardrobe.

You can tie a simple version with a solid shawl, change the surface of the stripes from the front to the wrong side (alternate them), or you can make the accessory even more interesting and feminine by decorating its edge with a delicate lace border. Fortunately, knitting allows the imagination to roam and create truly unique things.

It will be much easier if you first learn how to knit an ordinary bactus without unnecessary complications (satin stitch) in order to understand the principle of its manufacture. And when you manage to "get your hand" on this, it's time to try your hand and stock up on patience and attention for more laborious work - knitting a bactus with an openwork border. Perhaps it will take more strength, but the result will be worth it, and a new beautiful thing, hand-made with love, will warm and delight its owner, and will certainly cause delight and admiring glances from others.

Description of work

In the proposed version, the main fabric should be made with a regular shawl stitch. That is, on both sides (both from the inside and from the front), only either front loops (LP) or purl loops (IP) need to be knitted. Knit an openwork border, following the attached patterns in turn (first work on the first, and after completing half of the work, go to the second).

To work, you will need knitting needles No. 2 or 3, melange yarn - 300-400 g and a marker that can be replaced with a piece of contrasting thread. Then carefully follow the step-by-step description and diagrams.

1. To start work, dial 7 loops on the knitting needles.
2. Remove one knitting needle and knit the zero (from the inside) row according to the pattern.
3. Attach a marker (contrasting thread) to the edge.
4. Start working according to the first scheme (the one on the left in the photo). At this stage, do not forget to expand the main fabric (garter stitch) by 3 loops in every 12 rows (i.e. add one loop in every fourth row).

Following this pattern, continue to repeat rapports of 12 rows until half of the product is knitted. This is determined at the discretion of the needlewoman herself, based on the desired length and width of the bactus, as well as the remaining number of threads (that is, you need to understand in time that you need to knit further exactly as much as has already been done).

When half is connected, it's time to move on to the second scheme (on the right). From this moment on, the work will go on narrowing the product, while the pattern of knitting openwork remains unchanged, all reduction will occur on the main canvas:

1. Dec 1 st every 4th row (you can remind yourself of this by moving the marker);
2. Continue to follow the 12-row rapport of openwork with parallel decrease of loops from the fabric until 7 loops remain on the needle.
3. When there are 7 loops left (the same number with which the work began), they must be freely closed.

Lacy corners in the finished baktus at first (immediately after knitting) may twist a little, and the appearance of the product may lose somewhat from this. Therefore, the scarf must be wetted and spread on a horizontal surface (preferably on a fabric folded in several layers, it can be on a sheet to absorb moisture), and the corners of the openwork should be pinned with pins or needles. Let the bactus dry in this position. As a result, the lace edge will even out, and the thing will sit perfectly.

It is not recommended to steam the bactus with an iron. This, of course, is a faster option for aligning twisted corners, but the product itself can be inadvertently deformed in this way, and some threads from this may lose volume and begin to look as if washed out.

Just a little patience and attention, and the wardrobe will be replenished with a new, and at the same time absolutely unique, hand-knitted thing.

Needlewomen can diversify not only their own, but also the wardrobe of all family members by making beautiful things and accessories. But the thing should be not only beautiful, but also useful.

When it gets cold, you want to wrap up and keep warm. You can do this very stylishly by knitting yourself and your family bactus with garter knitting needles.

Bactus is essentially a scarf made in garter stitch. Homeland accessory - Norway. Initially, the product was an exclusively male part of the wardrobe, an integral part of the folk costume.

The accessory is quite multifunctional - you can wear it as a scarf, shawl or scarf. You can wear it not only on the neck, but also on the head. This element of the wardrobe will suit any style of clothing - urban, sports, classic and so on. Now it is no longer only masculine, rather, unisex.

The dimensions depend only on the wishes of the knitter - the bactus can be both large and small. On average, the length of the product is 1 meter, and the width is about 30 cm.

What is garter stitch?

Each needlewoman begins to learn to knit on knitting needles with a garter stitch. This is the most popular and easiest knitting method. This name is explained very simply - downy shawls were knitted with this pattern. Most often it is used as a background for patterns.

To begin with, let's recall the main types of loops - front and back. In garter stitching, it is they that are used by the alternation method: a front row, a purl row.

For front loops, the working thread is located at the back. You need to pull it out by threading the knitting needle in front. When knitting a purl loop, the opposite is true - the working thread is in front, and the knitting needle comes in from behind.

To start any knitting, you need to dial loops. For example, you can start small - 20 loops. Garter stitch is done like this: the first loop is removed, then the entire row is knitted with facial knit. The last loop is purl.

We turn the product over and knit in the same way as the previous row - the extreme loops are hem, and the row is knit.

The technique is very simple and usually almost any knitting begins with it.

bactus models

Despite the ease of execution, there are several different models of garter stitch bactus. A detailed description and diagrams below will help even a novice knitter cope with the task.

Bactus with leaves

The finished product will be 154 cm long and 33 cm wide. First you need to link the sample. The density of the product should be 24 loops for 31 rows - it will be a square of 10x10 cm.

You need to start with a set of three loops.

1 row - 1 loop - 2 front loops.

2 row - 2 loops in the wrong side, faces. to the end, from the last - 2 facial.

We repeat these rows 4 times.

Now the description of the leaves:

1 row - 2 loops in the wrong side, faces. to the end, from the last - 2 facial;

2, 4, 6 rows - 1 out., 4 persons. loops, then the thread wraps around the knitting needle and turns;

3, 5, 7 rows - faces. to the end, from the last - 2 facial;

9 row - front;

10, 12 rows - purl 1, knit 1, close knit 3, raise the thread on the needle and knit together with the loop;

11, 13 rows - front;

14th row - purl 1, knit 1, close knit 3, raise the thread on the needle and knit together with the loop, faces. to the last loop, from 1 loop 2 facial. We break the thread.

Now we knit to the desired size, repeating the main and “leaf” part again (from 1 to 13 rows). At the end, the 14th row is knitted, we close the loops, break the thread and hide the end.

Simple variegated bactus

The result is a product 180 cm long and 50 wide. You need to start knitting from the top point, that is, the middle corner, with a garter stitch. The whole product is knitted in garter stitch with increases in each row.

You can decorate the bactus with tassels or pompoms in the corners, or you can crochet it.

This model is suitable for any season, you just have to choose the right yarn.

What yarn is suitable for knitting?

For the first model, you need yarn of 2 colors - 100 g each. It is better to take circular knitting needles, from 80 cm, No. 2.5.

For a simple bright bactus, you will need wool yarn or a wool / acrylic mixture of about 300 gr. Knitting needles No. 4 are ordinary (then you will need to sew) or circular (you will get a whole product), hook No. 4.5.

As for the color of the yarn - it can be anything. Someone prefers one-color threads, and someone likes multi-colored products.

How warm the bactus will be depends on the thickness of the yarn. So for a winter accessory it is better to choose yarn with the addition of wool, and for the summer - cotton.

Bactus is a newfangled scarf that can be knitted in just a matter of hours. The technique is so simple that even beginners do not need additional instructions. Knitted bactus is made in just a few steps. Thanks to this simplicity, he gained incredible popularity. In addition, this accessory looks very impressive.

Bactus is a newfangled scarf-kerchief that knits literally in a matter of hours.

A scarf or scarf for a woman with a scalloped border is not difficult to knit. A simple pattern is understandable even to beginner knitters. Indeed, what could be easier than a garter stitch.

What is necessary:

• 100 g of yarn;
• knitting needles number 4.

We knit according to the scheme:

1. Three loops are cast on and ten rows are knitted with facial ones, be sure to make an increase in each even row.
2. In order to perform a zigzag, the first loop is removed not knitted, the second is knitted, after which the constriction is made. The right stitch is thrown over to the left, returns to the left knitting needle and becomes a hem stitch, three loops are closed.
3. After that, the zigzag technique is repeated from the second to the tenth row. At the same time, all even rows fit in with the increase.
4. Increases are made until the height of the product is 30 cm and the length is 1 m.
5. After that, the knitting of the other side of the workpiece begins. First of all, the top of the triangle is formed. For this purpose, the partial knitting method is used.
6. In the first two rows, the edge stitch is removed and the next two are knitted.
7. The work is turned and the remaining unknitted stitches remain on the left needle.
8. Now all three loops are knitted, and the hem loop is also made front.
9. On the next two lines, the hem is removed, only the next two are knitted.
10. Knitting is turned and all loops are made in the same pattern as in the second line.
11. Thus, in each of the odd rows, one knitted stitch is added.
12. When there are already five loops on the knitting needle, they are closed by analogy with knitting cloves.

Work continues until the entire side is decorated with cloves.

Scarf Baktus: knitting for beginners (video)

Openwork bactus breakwater spokes

In order for knitting to be successful, it is only necessary to learn how to do the work with front stitch and garter stitch. These techniques can be safely called the basics of needlework. Accordingly, even a beginner can do this diagonal ornament.

In order for knitting to be successful, you just need to learn how to do the work with front stitch and garter stitch

Detailed description:

1. A set of three loops, of which six rows are knitted with front stitch. In the last of them, an increase is made. To do this, two front stitches are knitted first for the front wall, and then for the back.
2. Six lines are made with the wrong side and an increase is also made on the last one.
3. These two stages are repeated until the height of the product reaches forty centimeters.
4. The alternation of the front and back surfaces continues, but at the same time, in every second line, one loop is added on the inside and one loop is removed in every sixth.
5. According to this pattern, another thirty centimeters of the product is knitted in height.
6. At the beginning of every sixth row, four stitches are closed and added one at a time in even rows at the end of the row, and in odd rows at the beginning.

When the scarf is the desired length, bind off all loops.

How to knit a bactus scarf with a garter stitch: a master class

It is best to knit such a winter accessory from mohair. It is from this yarn that the product will be very warm and beautiful. Depending on the color of the threads, the scarf can be both female and male. A simple pattern will suit absolutely everyone.

Progress:

1. Four loops are cast on the knitting needles.
2. All rows are knitted with facial loops. Including edge stitches.
3. Yarn over in the fourth row, as in all multiples of four.
4. Increases are made until the width of the product is equal to thirty centimeters.
5. After that, decreases are made, also in each multiple of four lines.
6. Knit according to this principle until only four loops remain. They then just close.
7. With the help of a hook, spirals are made along the edges. To do this, twenty air loops are collected and three columns with a crochet are knitted into them.

A simple pattern will suit absolutely everyone

Finished spirals are tied to the edges of the product. Thus, it turns out to additionally decorate the bactus.

How to tie a bactus to a child: step by step instructions

Beautiful, with crocheted elements, children's bactus will give any girl an amazing mood. It looks incredibly gentle and elegant. A little fashionista will certainly appreciate this product, the main thing is to know the correct sizes.

Progress:

1. Work begins with a set of four stitches. All actions are performed face-to-face.
2. In each multiple of four rows, an increase of one stitch is made.
3. When the number of loops on the needle is equal to seventy-five, it is necessary to start strangulation. Also in every fourth row, so that the product looks symmetrical.
4. Crochet a bactus around the perimeter, observing the following sequence of actions; three columns with a crochet, a pair of air stitches, three more columns and one air loop.

Despite the simplicity of making a Norwegian scarf-kerchief, this work also has its own characteristics.. It is the little things that determine how high-quality and beautiful the finished product will look.

Despite the simplicity of making a Norwegian scarf-kerchief, this work also has its own characteristics.

That is why it is so important to adhere to the following recommendations:

1. The standard length of the product is 50 cm, but if desired, it can be shortened or, conversely, made longer.
2. The average amount of yarn required varies from 200 to 400 grams. It is better to take a little more than originally intended.
3. It is better to choose yarn from a mixture of acrylic and wool. The product will be soft and will not cause irritation.
4. Knitting always starts from an acute angle.
5. Regardless of the pattern chosen, it is necessary to add one loop in each line, a multiple of four.
6. In order for the scarf not to twist, the first and last loop must also be knitted with the front one.

For a more original design of the bactus, it is recommended that the penultimate loop in the row be simply removed and not knitted, and the last one should be purl. At the same time, make an increase with the third loop in the line.

Knitting bactus: ideas

The classic triangular scarf is knitted in garter stitch and, in principle, is not decorated with anything else. But for fans to dream up this rule is unacceptable.

1. Skillful needlewomen combine the front and back surfaces, due to which it is no longer an ordinary bactus, but an original breakwater scarf.
2. If desired, you can tie the product with openwork viscous or leaves. In this case, the scarf will be just perfect for the off-season.
3. Even a classic triangular scarf can be crocheted, resulting in a more original, but very warm product.
4. An extraordinary decoration of an accessory can be tassels made from a strand or connected curls.
5. Even an ordinary brooch can transform an already beautiful product beyond recognition.

Mk how to knit bactus with knitting needles (video)

Bactus is not only an original, but also a practical product, because it can be used not only as a scarf, but also as a headdress. It looks incredibly stylish and original, which is why it has gained such popularity.

We knit triangular scarves. 5 options for knitting bactus

Triangular scarves or bactus slowly but surely captured the knitting world. And this is not surprising. After all, if a classic shawl requires a certain image (especially an openwork one), then bactus will easily fit into almost any wardrobe. And you can knit such a scarf from almost any yarn.

In total, we will consider 5 options for knitting scarves:

Classic triangular

Semicircular

With a wide center

Bound from the bottom corner

Scandinavian scarf.

For each option, a general description will be given, according to which it will be possible to knit a bactus from any yarn.
⠀
Yarn recommendations
For the winter, you can take an alpaca, an alpaca with wool, smooth, even or fluffy in a lace.
For autumn and spring, merino and any mixtures with it, cashmere, yak are suitable.
For the summer, you can knit a scarf made of linen or cotton.
The consumption of yarn per scarf is on average about 200-250 grams, depending on the yarn length.
The optimal footage is 250-300 meters per 100 grams of yarn and knitting needles 3.5-4.
Knitting should not be tight, the fabric should be plastic, drape well.

Part 1. Classic triangular scarf

Triangular scarf knitted from the middle.

The triangular scarf is the most common type of scarf. It is knitted from the middle, due to the execution of four increases (two along the edges and two around the central loop) it takes the form of an isosceles triangle.

Design options:

Front surface with the addition of shadow patterns;

Front surface with the addition of openwork patterns;

Original design of the central loop (patent loop, several loops, “pigtail”, etc.);

Knitting a scarf with stripes of yarn of different colors;

Various options for making increases: * yarns knitted with a simple loop (then we get a hole in the place of the increase), * yarns knitted with a crossed loop (there is no hole in the place of the increase), * increases from the broach, * lifting the loops of the bottom row.

As you can see, there is plenty to choose from, it all depends on what yarn you are knitting with, for what season and in what style. With medium-weight yarns (for example, wool, wool mixture, merino, merino blends), shawls look great without holes, with the addition of simple shadow patterns and garter stitch. From thinner yarn, you can knit a light scarf with openwork, you can use thin merino wool with silk or summer yarn.

So, the principle of knitting a classic triangular scarf very simple.
For a beautiful design of the beginning of knitting, you need to complete a set of loops with a “ribbon”.

To do this, you need a waste thread (preferably cotton) and a hook. From the waste thread, you need to crochet a chain of 4-5 air loops and fasten the thread. In the tubercles of the resulting loops, dial 3 loops with a working thread and tie 7 rows of garter stitch (knit all loops in each row). Tubercles form on the edge, they need to be hooked with the left knitting needle and knitted with facial ones. Then loosen the waste thread, while removing the loops on the left knitting needle. They are also knit facial. You should end up with 9 stitches on the right needle. Three loops along the edges form a border, and the central loops are the body of the scarf.

Row 1: K3, yarn over, knit to marker, yarn over, slip marker, k1 (center st), slip marker, yarn over, knit to last 3 sts, yarn over, knit 3.

Row 2: K3, purl to last 3 sts, k3.

And that's it! The principle of knitting is these two rows. In the front rows we make increases (in the description these are yarns), in the wrong rows we knit everything according to the pattern (or according to the pattern, if you add it). Nakida can be knitted with a simple purl (then there will be a hole at the place of the increase) or a crossed loop (then there will be no hole).

Part 2. Semicircular scarf

Semicircular scarf.

Such a scarf is knitted similarly to a triangular one, but the increases are made in other places, due to which the scarf takes on a semicircular shape.
Increasing can be done in various ways, with yarn, from a broach, by raising the loop of the bottom row. If the crochets are knitted with a simple loop, there will be a hole in the place of the increase, if it is crossed, there will be no hole. The scarf in the photo is knitted from Naturafil Alpaca Nublado yarn

from three skeins.

Design options:

Front surface with the addition of shadow and / or openwork patterns;
- knitting in strips of plain and section-dyed yarn (2 rows of one yarn, 2 rows of colored yarn). This option looks very impressive, especially if the stripes are made of yarn in contrasting colors. When knitting in stripes 2 rows wide, you do not need to break the thread each time. If you change the thread at the beginning of each front row and do not tighten the threads, then their change will be almost imperceptible.

Original border along the body of the scarf. This model of scarf allows you to knit a border along the body. The simplest version of the border is a garter stitch, which repeats the border that goes along the edges of the scarf. More complex - various variations on the theme of leaves, rhombuses and even braids.

Description of knitting

Beginning - a set of loops with a "ribbon".

For a beautiful design of the beginning of knitting, you need to complete a set of loops with a “ribbon”. To do this, you need a waste thread (preferably cotton) and a hook. From the waste thread, you need to crochet a chain of 4-5 air loops and fasten the thread. In the tubercles of the resulting loops, dial 3 loops with a working thread and tie 7 rows of garter stitch (knit all loops in each row). Tubercles form on the edge, they need to be hooked with the left knitting needle and knitted with facial ones. Then loosen the waste thread, while removing the loops on the left knitting needle. They are also knit facial. You should end up with 9 stitches on the right needle.

Row 0: K3, p1, place marker, p1, place marker, p1, k3.
Row 1: K3, yarn over, knit to marker, slip marker, yarn over, knit to marker, yarn over, slip marker, knit over last 3 sts, yarn over, knit 3.
Row 2: K3, purl to last 3 sts, k3.

Repeat 1-2 rows until the scarf reaches the desired size. After that, you can perform 3-5 rows of garter stitch and close the loops.
Or tie a border along the body of the scarf, while closing the loops of the body.
After the body of the scarf of the desired size is knitted, a certain number of loops are typed on the knitting needles for knitting the border.
The border is knitted in turning rows, while the last loop of the border is knitted together with the loop of the body closest to it, thus joining the border to the body and closing the loops of the body of the scarf.

Part 3. Scarf with a wide central part

A scarf with a wide central part.

The principle of knitting such a scarf is 4 increases in each front row: one from each edge and 2 along the central part.

The easiest way to knit this type of scarf is garter stitch (in all rows, all loops are knitted).
In this case, the scarf turns out to be very plastic, especially if it is knitted from chain yarn.
You can wear it with the wide part forward, leading the ends behind the neck. The width of the flat part in this case should be approximately equal to ¼ of the girth of your chest.
You can diversify this model by knitting various patterns in the central part - openwork, shadow or relief patterns. In this case, the scarf will have a face and a wrong side.

Description of bactus garter stitch .

Knitting a scarf with a wide central part begins with a simple set of loops. The number of loops is equal to the number of loops of the central part + 6 loops. For example, the central part is 30 p. Then you need to dial 36 loops on the knitting needles and mark the central 30 loops when dialing with markers.
Abbreviations:
persons - facial loop;
PN - right (reverse) yarn - throw a working thread on the right knitting needle in a movement from left to right, under the thread;
LN - left (straight) yarn - throw the working thread on the right knitting needle from right to left.

1 row: 2 persons, PN, 1 persons, PN, reshoot the marker, 30 persons, reshoot the markers, LN, 1 persons, LN, 2 persons.
2nd row: knit all the loops, while knitting the crochets crossed, right - for the back half-loop, left - for the front.
3 row: 2 knit, PN, knit to the marker, PN, reshoot the marker, 30 knit, reshoot the marker, CL, knit to the last 2 loops, CL, 2 knit.
4th row: knit all, knit yarn over crossed.
Repeat 3-4 rows. Loops close freely, as facial.

Part 4. Scarf from the corner

Scarf knitted from the bottom corner.
This is the simplest scarf of all options. Such a scarf is best knitted from yarn with an unusual texture, fluffy, boucle.

In the photo, a dry rose scarf is knitted from Nako Paris yarn, and dark purple from Naturafil Superfine Alpaca delgado yarn. In both cases, the consumption of yarn is 200 grams. The lilac bactus alternates knit and garter stitch stripes.

Such a scarf is knitted from the bottom corner, 2 increases are made in each front row, due to which the bottom corner is sharp. But it also depends on how you block the handkerchief.
It is important to remove the edge loops at the beginning of each row as facial ones, and knit them with purl ones at the end so that an elastic pigtail forms along the edges.
Design options:

Garter knit;
- alternating stripes of front and back surface or garter stitch;
- adding openwork patterns.

Description of knitting.

Cast on 3 sts on the needles.
- 1 row: remove the hem, nakid, 1 person, nakid, knit the hem purl.
- 2nd row: remove the hem, faces to the last loop, hem - out. Knit crochets crossed
- 3rd row: remove the hem, yarn over, faces to the last loop, yarn over, hem - out.
- 4th row: remove the edge, faces to the last loop, edge - out.

Repeat 3-4 rows until the scarf reaches the desired size, close the loops freely, as if they were facial.

Part 5. Scandinavian scarf

This is the most difficult scarf to make. The triangular shape is formed by simultaneously making increases and decreases on both sides of the scarf.

There are two knitting options - from the wide side to the corner and from the corner to the wide side. In both cases, the shape of the scarf is the same.

In the photo with samples, one is connected from the corner, and the second from the wide part. As you can see, the difference is barely perceptible. But we will consider both knitting options.
Design options:
- knitting garter stitch,
- adding openwork and shadow patterns (some patterns require knitting from the bottom down, in this case it is more convenient to knit from the wide part to the corner),
- tassels at the ends of the scarf.

Classic variant- This is knitting from the wide part to the corner.
A certain number of loops are cast on the knitting needles, then in each front row 2 decreases are made from the right edge of the scarf, and in every second front row (that is, the 4th row in a row) - increases from the left edge of the scarf.
When knitting in this way, you need to know exactly how many loops you need to cast on to start knitting. To do this, you need to knit a sample, wash and dry it, calculate the knitting density and find out how many loops you need to dial in order to end up with 130-140 cm along the edge of the scarf.
Another important feature is that on the side of the reductions, the hem lines must be knitted at the beginning and at the end of the row (at the beginning - the front, at the end - the wrong side), and on the side of the increments at the beginning of the row, remove, and knit the wrong side at the end.

Second option- knitting a scarf from the corner towards the wide part. In this case, increases are performed in each front row (2 loops are added at a time), and decreases are made in every second front row. At the same time, there is a feature of knitting edging. From the side of the increments, knit the edging at the beginning and at the end of each row (at the beginning - the front, at the end - the wrong side), and from the side of the decreases - remove at the beginning of the row, and knit the wrong side at the end.

Description of knitting 1 option from the wide part (for Naturafil Merino medium yarn, 100% merino wool, 90 m in 50 g).

Cast on 180 sts on needles #6. Continue knitting with knitting needles No. 5.

Installation row (wrong side): all loops are facial.

1 row (face): 1 knit, 2 loops together with an inclination to the right, 2 loops together with an inclination to the right, persons to the last loop, out.

Row 2 (purl): remove chrome, purl to the end of the row.

3 row (face): 1 knit, 2 together, 2 together, knit to the last 2 loops, increase, 1 knit, 1 out.

Row 4 (wrong): remove chrome, purl to the end of the row.

Repeat from 1 to 4 rows until 3 loops remain on the needles, knit them together. In the course of knitting, add patterns (shadow and / or openwork) at your discretion. An excellent video on knitting a Scandinavian scarf from a wide edge is on the channel Svetlana Kolomiets. We recommend watching it if you need a more detailed analysis of knitting.

2 option Scandinavian scarf - from the corner.
I repeat that the shape of the scarf is identical to the first, you just need to close the loops of the last row more freely so as not to tighten the edge.

Description:

Increasing - knit 2 from one loop, knitting it first behind the back, then, without removing it from the left knitting needle, behind the front wall.

Cast on 3 loops.

Installation row: 1 persons, increase, 1 out.

1 row: 1 persons, 2 increases, 1 out.

Row 2: Slip 1, purl to end of row.

3 row: 1 persons, 2 increases, 2 together with the front with a slope to the right, 1 out.

Row 4: Slip 1, purl to end of row.

5 row: 1 persons, 2 increases, facial to the last loop, 1 out.

Row 6: Slip 1, purl to end of row.

7 row: 1 person, 2 increases, facial to the last 3 loops, 2 knit together with a slope to the right, 1 out.

Row 8: Slip 1, purl to end of row.

Repeat from 5 to 8 rows until the scarf reaches the required size. Cast off loosely using larger needles.
If in the purl rows the loops are knitted with facial loops (except for the hem ones), then you get a bactus with a garter stitch. In this case, patterns are not needed.

https://5motkov.ru/blog/view/2243/