Schemes of men's knitting mittens: the necessary materials and tools, as well as a detailed description of knitting technology. The classic version of knitting men's mittens with knitting needles How to knit men's mittens

A good way to become the owner of unique mittens is to knit them yourself. It is more convenient to crochet a circular thing of a small format, but there are many ways to get by with knitting needles - five or two. Beginners should study different techniques in theory and choose the one that is easiest to understand and implement in practice. Simple mittens are easy to knit, but they are unlikely to become original if they are not additionally decorated with embroidery or appliqué, including voluminous ones. Even if you are uncertain about knitting needles, you can achieve an interesting result if you put maximum imagination into your mittens.

How to start knitting mittens

To knit a product, it must first be well represented. Not abstract mittens, but those that you would like to wear or give to a relative or friend. You need to decide on the color of the mittens, their thickness (for severe frosts, for light winter, for the demi-season period), purpose (for sports, going out, for everyday wear). Women's and men's mittens can be decorated with a pattern, but in the first version it can be delicate or pretentious, and in the second it can be more strict and concise.

Children's mittens should be made from safe materials, but at the same time very durable. Little naughty people subject their mittens to constant stress: either they make a snowman, or they ride down a hill, sliding on the ice or running their palms along the wooden side. And as the children grow up, skiing and skating, building snow fortresses, etc. will become their usual hobbies. This is an even greater burden on mittens. That is why it is recommended not only to tie them, but also to provide the inner side, falling on the palm, with waterproof and slightly abraded material.

Yarn selection

Very thick threads, as well as knitting needles for small accessories, are not suitable. The smaller the texture, the more interesting the drawings can turn out on mittens. It is most convenient to knit with knitting needles from 3 mm and thinner. Yarn should not exceed the thickness of the diameter of the knitting needles.

For frosts, it is good to knit down mittens, but it is better to add synthetic thread to yarn from pure down for strength. You can also use mohair with the addition of synthetics. Colored acrylic yarn is great for demi-season mittens. It is good to make mitts from it - mittens without fingers. Such an accessory is indispensable for those who have to spend a lot of time behind the wheel.

Choosing a scheme and pattern

Everything here depends entirely on your imagination. Someone prefers jacquard patterns, traditional for factory mittens. Someone prefers to knit plain mittens with knitting needles, and then decorate them with crocheted details. Someone likes embroidery on the finished product. But even for such a small thing, you can also choose a textured ornament, which is immediately made with knitting needles. Experienced craftswomen can make “bumps” and “arana” on mittens. Openwork patterns make sense only for mitts or two-layer mittens.

Beginning knitters should choose the simplest ornament or stocking knitting in order to master the techniques for creating mittens with knitting needles. You can decorate mittens later - with embroidery, beads, beads, sequins. If there is a desire to do everything at once, then you should choose a thread with lurex for mittens.

Knitting mittens - instructions for beginners

Simplified, the mitten consists of two “chambers”: the smaller one is for the thumb, the larger one is for the palm. People inexperienced in knitting should study in detail how to tie the transition from one “camera” to another so that the mitten turns out to be solid. When it is performed on two knitting needles, one beginning is obtained - an elastic band - and two ends: one - on the finger, the second - on the main part. We will return to the elastic later, and now we will analyze how the main part of the mitten is knitted with five knitting needles. To beautifully move from the elastic band to this part, you can add one loop in the middle of each of the four knitting needles. In order not to form a hole, an additional loop should be made not at the expense of the yarn, but knitted from the broach between the loops. Next, the mitten is knitted in a circle to the place where you need to go to the thumb.

Here you should knit a thread of a different color without fastening, as it will then have to be taken out. From the first knitting needle we knit one loop with the main thread, then we replace it with a thread of an alternative shade, and we knit all the loops from the knitting needle to the last one. Then we remove the loops of a different color one by one from the working knitting needle and string on the 1st knitting needle. We knit these loops again with the main thread, then we knit the loop that remained last on the first knitting needle, and continue to knit on the remaining three knitting needles. The backlog for the thumb is ready.

We continue knitting mittens with knitting needles to the end of the little finger. In some people, the little finger is much shorter than the rest of the fingers. Then you can knit a few more rows - up to the holes of the nails on the ring or index finger (depending on which one is located lower on the raised palm). From this place, you can proceed to the gradual closing of the loops - the formation of a toe.

Reductions are made at the beginning of the 1st and 3rd needles, as well as at the end of the 2nd and 4th needles. On the 1st and 3rd needles, the first loop is removed behind the front wall, the second loop is knitted with the front and pulled through the first. On the 2nd and 4th knitting needles, the penultimate loop is knitted with the front one, returned to the non-working knitting needle. With a working knitting needle, we stretch this loop into the last loop that remains unknitted. So we close until the moment when a pair of loops remains on the knitting needles. They can be stretched one after another through each other, and stretch the cut thread into the last loop and tighten. Hide the thread in knitting.

How to tie a thumb

It's time to return to the colored thread - a touch for the thumb. It must be carefully pulled out, and the loops on both sides should be caught on two knitting needles. For a pair of loops, you need to dial holes from the side walls with the two remaining knitting needles. Distribute the loops on four knitting needles evenly and tie the thumb in a circle. You can close it with the same “wedge” as the main part of the mittens.

How to knit an elastic band

It is easy to knit a beautiful elastic band for mittens with knitting needles. It is necessary to dial the required number of loops on two knitting needles, a multiple of four. Next, the loops are distributed equally on four knitting needles. The needle where the tail of the thread ended up is called the first; rows are counted from it. We start knitting an elastic band 1 x 1. As soon as we reach the second row, we knit how the loops “look”. We knit the front loops behind the front wall, and the wrong ones - behind the back. Then we will get the same beautiful elastic band as when knitting in rotary rows. In order for the elastic band to wrap around the wrist well, it must have a sufficient height - 4–5 cm.

Mittens on 2 needles

With two knitting needles, you can knit a mitten with a seam. It is knitted in the form of a sweep, and then its parts are connected. Knitting begins with taking measurements. Next, the required number of loops for the elastic is dialed, a multiple of 2, plus two edge loops. The elastic band is knitted according to the scheme 1 x 1 of the desired height (4-5 cm). We pass to the main part of the mittens. If it is necessary to make an extension, then we evenly add loops, knitting them with a knitting needle from a broach between two loops of the previous row.

When we reach the beginning of the thumb, we knit a couple of loops, then we remove the number of loops necessary for the finger on additional knitting needles (a pair of knitting needles with a flexible connection) of the same diameter. You can calculate the number of loops as half the circumference of the thumb plus a small margin to make it easier to put on and take off the mitten. Next, we knit only these loops with additional knitting needles to the end of the thumb. We check the size and continue to knit further so that the resulting strip freely bends around the thumb in length.

Now we return to the main knitting needles and put on the loops from the end of the strip to the working knitting needle. We knit to the end of the row, turn the knitting and continue to knit all the loops, including the "finger" ones and those that remained knitted before the formation of the finger. We reach the end of the mittens and divide the loops in half. Again we will use additional knitting needles, where we will remove half of the loops. The rest of the knit with decreases on both sides. When a third of the total number of loops remains on the knitting needles, they can simply be closed. We take additional knitting needles and knit the same on them. We sew the side parts of the thumb on the wrong side, and then the entire mitten. We use a knitted stitch.

How to finish a mitten

Knitted mittens often end with a wedge, but not everyone likes this pointed edge. You can slightly round the mittens, giving them a more feminine silhouette. The faster the loops decrease, the more obtuse the angle is at the end of the mittens. If we work with five knitting needles, then on each of the four knitting needles of the "well" we need to perform two decreases - in the middle and at the end, knitting two loops together with the front one. So you need to reduce the number of loops row by row until 4 or 8 loops remain. They can be combined by knitting into each other or pulled together with a thread. The toe will turn out flat and neat.

We knit mitts with knitting needles - diagrams with a description

It’s even easier to knit the mitts with knitting needles: you don’t need any reduction at the end of the mittens, or the wisdom of doing the thumb. Sometimes the mitts contain a wedge into which the thumb comes out, sometimes it is just a hole. The most closed version of the accessory has a thumb tube topped with an elastic band. A similar elastic band is made along the edge of the wide part of the product. The simplest version of openwork open mittens can be associated with a finger hole.

The peculiarity of openwork mittens is that they are well blown, it will not be too hot in them, moreover, such an accessory is perfect for a cardigan knitted with a similar pattern. The ornament should be placed on the outside of the palm, the inside can be knitted with a smooth fabric from the front loops or also made openwork. First, you should knit the sample with the same knitting needles that are taken for work, measure it and calculate how many loops you need to dial in a circle for the palmar part. To do this, the girth of the palm is preliminarily measured.

You need to start knitting with an elastic band. Its size depends on the girth of the wrist. You can also tie a separate elastic band and measure how many loops fit in the wrist circumference. When knitting with five knitting needles, do not forget that you need to make sure that instead of an elastic band you do not get “millet”. If we see the front loop, then we must also tie a similar one over it.

Having knitted 4–5 cm with an elastic band, we move on to the main ornament of an open mitten. If this part needs an extension, then we add a loop, knitting it from the jumper between the loops of the previous row. If you need to reduce the loops, then just at an equal distance from each other, you should knit two loops with one loop. While the openwork pattern is being worked in a circle, odd rows are knitted according to the pattern, even rows are knitted. But as soon as we come to the hole for the thumb, we have to switch to turning rows, although knitting continues with five knitting needles. And then even rows must be knitted exclusively with purl loops. As soon as the edges of the hole need to be closed, you will have to switch back to circular knitting, therefore, even rows must be done with facial loops. You can finish knitting with an elastic band 1-2 cm long, then close the loops.

Making tight mittens with a pattern is somewhat easier than knitting mittens with knitting needles. The wedge for the thumb may be difficult. If we have an ornament on the outside of the mitts, then on the inside and the wedge, a smooth stocking knit should be made. The beginning of the wedge is located not far from the gum - after a couple of rows. The basis for the wedge is the second loop on the first knitting needle. To make it symmetrical, you need to double crochet on both sides of this loop or knit it from the jumper along a new loop. The second option is preferable, because this way there will be no holes in knitting. Increases must be made through the row. Then try on the product: did it reach the base of the thumb. We knit a couple more rows and remove the loops of the wedge on an additional knitting needle or pin. We close the remaining loops in a circle and knit to the base of the remaining fingers. We close the loops and transfer the knitting needles to the wedge. From the side loops of the hole we collect half as many loops as we have left on the pin. Next, we knit with knitting needles in a circle a small elastic band and close the loops.

For the little ones, it’s also easy to knit mittens with knitting needles. The product turns out to be so miniature that the very minimum of time will be spent on it. But you can give free rein to your imagination by designing mittens for cartoon or fairy-tale characters. You can also invent a lot of all kinds of jewelry. There is no difficulty in knitting small things, you just need to take a tool with a smaller diameter if you want to make an ornament on mittens.

What patterns to choose to knit mittens for a girl? Delicate, floral, airy. The main thing is not to forget that mittens are needed for warmth, and that the child should be comfortable in them. There are several options for decorating knitted mittens. It is easy to knit mittens with an owl. The night bird will have to make eyes out of two small beads. For babies, it is worth making mittens with knitting needles without knitting the thumb separately. It is better for kids when the whole pen is in one “receptacle”, because it is warmer for all fingers. It is good to make such mittens with ears and embroider the muzzle of a kitten. This item of children's wardrobe is often called "scratches", but not because it is able to scratch, but because a child in such mittens cannot accidentally scratch his face.

You can knit mittens with knitting needles equipped with a thumb for older children. To the delight of the baby, on the inside of the mittens, make an image of cat pads. They can be knitted immediately with knitting needles or crocheted separately and sewn on as an appliqué.

Knitted mittens - with hares, chanterelles, bears and bullfinches - are equally good for boys and girls. Only the color scheme will differ.

For a child, you can knit mittens with knitting needles in the same way as for an adult. How to make an elastic band and the transition to the thumb, we have already studied. It remains to understand how to make, armed exclusively with knitting needles, an interesting pattern. To begin with, we will audit the remaining yarn and evaluate what shades are available. We will select an interesting picture in the desired color scheme. For example, the remnants of blue, red, black and brown yarn will allow you to make a bullfinch on a branch. If there are several shades of green and brown, you can make mittens with a tree.

Well, if there is a picture, pre-broken into squares for knitting. But if this is a cross stitch pattern, then it will have to be slightly converted. Knitted fabric is stretched in width. The drawing will also come out. Therefore, you need to knit a test sample of garter stitch 10 x 10 loops with the selected yarn and the knitting needles that you intend to work with. Next, we measure how many centimeters it turned out in our sample in length and width, draw up a proportion and again divide the drawing into squares with correction.

Pattern "Cat" knitting needles

You need to start knitting mittens with knitting needles from the main tone, making an elastic band with them. Next, we move on to garter stitch and introduce threads of other colors. It is advisable not to cut them off each time and tie them with a thread of the main or another color, but to lay them at work. So that the threads do not interfere in the future, they should be hidden in knitting or sewn from the inside in place of the non-woven pattern. So the child's fingers will not get tangled in the stretched threads.

Knitting mittens - beautiful knitting

No less interesting is the textured knitting on the mittens. If you have learned to wield knitting needles and a knitted pin well, then it will be easy for you to make “braids”, “ropes”, “tulips” and other ornaments with overlapping loops - “arana”. How to do this, it is better to watch the video than to explain in text format.

An interesting idea is to knit mittens with knitting needles for lovers. At the stage of a romantic relationship, it is so nice to walk down the street holding the hand of a loved one. But when both hands are in mittens, it is difficult to feel each other's warmth. Therefore, the set for lovers contains only three mittens: two regular and one double, with two cuffs and a common chamber for two hands. It looks like a bent sleeve. If you start knitting it from elastic bands, you will have to use two sets of knitting needles, knit an elastic band on each of them and a couple more centimeters with the main pattern.

Then you have to redistribute the loops and knit with only five knitting needles a common “well” to the desired height. Do the reductions at the top in the same way as for an ordinary mitten. When knitting a double mitten with knitting needles, you do not need to make a separate cover for the thumbs. Let them all be inside, because it's more convenient to hold hands.

Are you able to master knitting mittens with knitting needles? Get down to the men's mitts. Husband or father will need them when driving a car. And when repairing a car in cool weather, this is generally an indispensable thing. These mittens give complete freedom of movement, do not affect the sensitivity of the fingers, but still warm.

It is also worth arming yourself with knitting needles and tying separate caps on your fingers for such mittens. The caps must cover the length of the mitts so that they can be fastened. Outside, they can be fixed on a button, but on the inside of the palm, such a clasp will become an obstacle. It is better to use Velcro here, because it is flat.

Another reason to knit transforming mittens with knitting needles is the constant need to use a touchscreen phone or tablet. Gadgets are sensitive to the heat of the hands, besides, sometimes you have to expand or narrow the image, but this cannot be done in a mitten.

It is easy to knit men's mittens with knitting needles: no complex patterns are needed here, you can get by with a modest garter stitch.

Many women face the question of how to insulate their husbands and sons. As you know, the limbs of the hands are subjected to the greatest freezing. In this case, by the way, men's knitting mittens will come to the rescue, which will be an excellent addition to the men's wardrobe and are now considered quite fashionable.

Good gift

Mittens are very comfortable in winter. They save your hands from freezing. At the present time in stores you can buy mittens of any size, quality and model. You can't always guess the quality. With all the variety, accessibility, it will be more pleasant to wear hand-knitted mittens. They will be better quality and warmer. You can also tie a scarf to them, then you get a good set. And how nice it is to give gifts. With the ability to knit, it will not be a big problem with choosing a gift for dear, beloved people.

The most valuable gifts are those made by hand, with love. They show respect for the person., warmth, care that you want to present to the closest people. Therefore, knitted mittens can be presented as a gift.

Only initially it may seem that knitting men's mittens is quite difficult. But if you use the schemes, you can make high-quality, warm men's mittens, knitted with knitting needles, and additionally choose the patterns that you like best.

You will need to consider the features of knitting men's mittens, the selection of threads, finding a suitable pattern. The desired color is selected, taking into account taste male preferences who decided to make a present.

More often men prefer discreet colors. If you want to surprise with your needlework, you will have to knit according to the pattern of knitting men's mittens, and if you try on while knitting, then there will be no surprise.

Getting Started

Initially, you need to make a simple pattern, its use will save time and make knitting more fruitful. To create a pattern of mittens for men, you just need to circle your palm on paper. We must not forget that the thumb must be outlined separately from the other four. Then, so that the mitten fits comfortably on the hands and does not create inconvenience, the pattern is developed carefully.

So that the mittens do not put pressure on the hand, you will need to more accurately determine the size. You should put your palm on the paper, moving your finger to the side. We outline along the outer contour. We mark with auxiliary lines where the cuff ends, the finger begins. The tip of the little finger and the beginning of decreasing loops for the base of the upper part of the mitten are also marked. It should also be noted the length of the thumb.

For beginners, it is better to choose a simple pattern for knitting mittens with knitting needles.

Knitting men's mittens with knitting needles according to the schemes is not difficult at all. It is better to knit with front stitch. When the experience of working on a simple scheme comes, we proceed to a more complex one. It will be possible to start knitting a variety of patterns, use different patterns.

Tool and knitting start

Care should be taken to have on hand specific materials:

1. 5 knitting needles N 3.
2. Safety pin for tying the thumb.
3. 100 grams of wool yarn.

For a wrist circumference of 20 cm, cast on 36 loops. It is necessary to distribute equally on all knitting needles (9 loops on 1 knitting needle). You need to start work with a cuff. An elastic band is knitted - 2 front loops, 2 - purl. The height of the elastic is 7 cm. Then another 7 cm is knitted with just facial loops.

In order to knit a place for the thumb, loops are left. The number is equal to the number of loops on 1 knitting needle minus 4 loops. They are assembled on a pin, for the jumper of the palm and finger, dial the loops again.

If there is no pin at hand, you can simply remove it on a thread of a different color. Continue to knit the palm of the mittens to the line of the little finger.

Toe and thumb

Now it's time to knit the toe of mittens for men. Often all this is done in a triangular form. On the 1st and 3rd needles, the loops are reduced at the beginning of the row, on the 2nd and 4th at the end. We must not forget that the first loop on 1 and 3, as well as the remaining loop on 2 and 4, is knitted without decreasing. Then neat pigtails will turn out at the ends of the toe. Continue knitting until there are 2 loops on all 4 knitting needles. Pull the loops and carefully fasten from the wrong side.

We begin to knit the place where the thumb should be. Loops from an additional thread or pin are transferred to the knitting needles. On the other needle, you need to dial as many loops from the jumper as there were on the pin. Knit a place for the finger should be similar to the main part of the product.

With four knitting needles, the fabric is knitted only with the smallest diameter. The decrease is also done in a triangular form from the middle of the nail.

The second mitten for men is knitted in a mirror image. You can diversify with a pattern from a tourniquet, it is done very simply. On the upper part of the mitten, when knitting, knit 2 loops inside out, the next two are thrown onto a pin, then 2 are knitted with facial loops, turning away by the knitting needle, 2 inside out. Further, where purl, purl, facial facial loops, so 4-5 rows. Then the pattern is repeated.

After that, you can move on to more complex combinations. As experience comes, knitting products with an ornament or pattern will not be a problem. Men's gloves can be knitted peculiar form with a varied set of the first row of elite yarn.

Another option

To create gloves, you can use another pattern for knitting men's mittens with knitting needles. For knitting you will need:

1. Woolen yarn with polyamide.
2. Spokes under N 3 and 3.5.

Knitting begins with the left mitten. 45 loops are typed on the knitting needles. Dividing the dialed loops into 4 parts, you must be guided by this principle: 11,11,11,12. First, an elastic band is knitted (1 facial, 1 purl), at the same time, a pattern is knitted from the back according to the pattern: 1st purl, then an elastic band for another 28 loops, 8 with a relief pattern, 8 with an elastic band.

After 20 rows, from the 21st, we replace the knitting needles with N 3.5 and then everything is done with facial knitting, continuing the pattern according to the scheme. In proper order: 22 persons, 23 relief pattern. There should be 46 stitches at the end. It is necessary to continue like this: from 22 to 33 rows. At the same time, loops are added for knitting a place under the finger. With a similar type on the 1st and 2nd knitting needles, facial loops, except for the extreme 4 loops, 2nd: throw 1 loop, lifting a parallel thread, knit crossed front 2 faces, 1 is thrown over, 2 front, and the 3rd and 4th spokes go without changing anything.

Add loops every 2 rows, and in the third five more times. After the final increment, 1 row is knitted, the remaining 14 loops are transferred to a pin. You should continue to knit the fabric. In place of the transferred loops, you need to dial 2 new loops to make 46. Having knitted 16 cm, you need to knit to the tip of your index finger, and then round off. To do this, at the beginning of the 3rd knitting needle, 2 facial broaches are knitted (1 is removed, 2 are knitted through the first). The rest follow the same technology, except for the last 2.

They are knitted together by persons, thus, 2 reduced by one row, 44 remains The next row on the 1st knitting needle 1 facial, 2 broach together 8 facial; on the 2nd 8 front, 2 together, 1 front on the 3rd 2 together with a broach, the rest on the same principle, 2 together. It turns out 40 loops. This continues until there are 12 loops.

The remaining loops are pulled together, the thread is cut and fixed. Now you need to knit the place of the thumb. Loops are removed from the pin and divided into 3 equal parts. 2 loops are added - it will turn out 16. The front loops must be continued to knit to a length of 5 cm. Then, in turn, you will have to decrease one loop at a time until it becomes 4. The loops that remain on the knitting needles are fixed.

The right mitten is knitted symmetrically, only the place of the thumb is knitted at the beginning of the 3rd knitting needle, stepping back 2 loops. Men's mittens with knitting needles can be insulated from the inside. To do this, use a dense warm fabric, circle the mitten and cut out the lining. The cuffs can be decorated with a fur cut. If mittens are for a boy, then buboes are sewn to them.

General mitten

You can knit mittens for lovers. In such mittens it will be nice to feel the warmth of a loved one, walking together in the cold. Mittens for lovers can be knitted from threads of any color with a heart on any background you like. A red heart on a white background will look beautiful. A common mitten is tied up so that, walking around the area, you can hold hands and keep warm with the warmth of each other.

The elastic should be tied separately for each of the hands. Tie 2 rubber bands. The loops are connected with circular knitting needles. You will have to knit in a circle with the front stitch. There is no room for a finger. Knit until a heart is knitted. The heart is made like this: first, on one side, 6 loops in the center of knitting with a white thread through two loops.

Next row - 7 loops with white yarn through 1 red. Then we continue to knit men's mittens with knitting needles. First, the loops are knitted with a white thread, then the white thread is reduced until 1 loop remains. We knit a toe for a mitten - when 2 loops remain, it is fixed from the wrong side.

Attention, only TODAY!

materials: Till Castle yarn (60% alpaca, 30% merino wool, 10% acrylic, 75 m / 50 g) 200 g melange, toe knitting needles No. 5.

Checkerboard pattern: 1-4th rows knit * 4 p. Persons. satin stitch, 4 p. out. satin stitch * repeat * - *.

5-8th rows, shift the pattern in a checkerboard pattern, repeat * 4 out. p., 4 persons. P.*

Repeat from 1st to 8th rows.

Knitting mittens

Cast on 40 sts on the needles (10 sts each) and work 18 rows in 2x2 Rib in the round. Next, 8 rows on the 1st and 2nd knitting needles, knit with a checkerboard pattern, on the 3rd and 4th knitting needles, front stitch. 9th row on the 1st and 2nd knitting needles, knit a checkerboard pattern, for a finger from the 3rd knitting needle, knit 4 stitches with a contrasting thread, return these loops to the knitting needle, knit with the main thread of the faces. satin stitch. Continue knitting in this way until the mittens measure 23 cm.

Next, knit to the end on the 1st and 2nd knitting needles of the strip as follows: * 4 p. smooth, 4 p. out. stitch * repeat * - * on the 3rd and 4th knitting needles. smooth surface. At the same time, at the beginning of the 1st and 3rd knitting needles and at the end of the 2nd and 4th knitting needles, knit 2 sts together 3 times in each 2nd row, then in each row until 6 sts remain.

Pull the loops, fasten the thread. For the finger, remove the contrast thread, transfer the loops to the knitting needle, dial another 8 sts around the hole = 12 sts. Knit the finger on 3 knitting needles. stitch 6 cm evenly, then knit on each knitting needle in each row 2 sts together. Pull off the remaining 3 sts, fasten the thread.

Knit the second mitten symmetrically.

When the winter period approaches, there is a need to warm up with knitted knitwear. On frosty days, feet and hands freeze most of all, so it is so important to tie cozy mittens and socks for winter. In this lesson we will consider the manufacture of warm knitted men's mittens.

Having mastered this needlework, you can easily move on to knitting women's and children's models, because the principle and technique of work remain unchanged. Only the consumption of yarn changes depending on the size of the product, as well as the variability of colors. For male models, soft and dark shades are characteristic. Often they are knitted in one color. Many needlewomen prefer to choose jacquard patterns for this purpose, which are made up of threads of muted shades. Consider, for example, how men's mittens are knitted in the classic version.

This is a classic men's model, which is knitted with gray threads with red stripes at the cuffs. For needlework we use 60 grams (g) of woolen yarn, 100% wool. One 100 g skein contains 170 meters of thread. There is no pattern and pattern here, so the product is within the power of a novice needlewoman. To learn the art of making men's accessories, it is enough to master the manufacture of such a simple model, and then you can gradually complicate the work by adding a pattern or pattern to your taste. Before starting needlework, we determine the length of the circumference of the brush using a centimeter:

To perform the classic male version, you need to use dense warm yarn, as well as a set of stocking knitting needles. Knitting is done in a circle, starting with an elastic band and moving to the toe. To determine the required number of loops (P) of the set, it is necessary to multiply the girth of the arm by the density of the fabric knitted from this yarn. In our case, this is 20x1.7 \u003d 34 P. Let's add 2 more P to this number so that we can distribute them equally. So, let's dial 9 P each, that is, the total will be 36. We knit a men's mitten with classic P, because using the second method can lead to deformation of the product. To facilitate the work, you need to close the knitting in a circle, and mentally divide it by numbers, like this:

In the lesson, knitting of the right mitten for men is performed. Let's assume that on the 1st and 2nd knitting needles there are P of the bottom, and on the 3rd and 4th the upper zone is placed. Let's start with the cuff, which is knitted in 1x1 ribbing. In the course of needlework, add red stripes. To do this, after three rows (P) of gray yarn, we knit another 3 P of red. Then after 3 P we repeat the red stripe again. The length of the elastic corresponds to 7 cm, but if desired, it can be varied. Having finished the cuff, let's move on to the formation of the main zone of the product. At the same time, we knit the distance according to the measure to the point where the thumb should begin. This size usually ranges from 5 to 7 cm:

Now the turn has come to knitting the thumb. In our case, knitting is done on the first knitting needle. When you do the left mitten, place the st on the second needle. On the 1st we knit one P with the main shade, gray. Next, we introduce a red thread into work, and we knit to the edge P, and the last edge will again be gray. Then we place the red Ps on the 1st knitting needle again, and knit them with gray yarn. As a result of these operations, we will get a red stripe, which will serve as a guide to start knitting the thumb:

Let's postpone the knitting of the thumb for a while, and complete the main zone to the place where the little finger ends. In our case, this distance is 8 cm:

To form the correct shape of the toe, you need to reduce the amount of P work. At the same time, on the 1st and 3rd knitting needles, we will perform the first 2 Ps together, and on the second and fourth, the last 2 Ps together. This technique reduces P through a row until the number is halved. In our case, we subtract 4 P on each instrument, that is, the smaller part, because their number is odd. Next, we reduce the P in each row, and bring their number to 2 on the knitting needle. At this stage, we tighten the last loops. After that, it remains to finish the needlework by tying the thumb of the mittens for men. At the beginning, we take out the red thread from its base, and string all the free loops on 2 tools, 7 pieces at the bottom, and 6 at the top:

Then we divide these P into 4 tools. At the same time, only on the 1st four P, and on the rest 3 each, pulling the 4th loop everywhere from the side edge of the hole:

Having distributed P, we knit the thumb of the mitten to the middle of the nail. Having knitted to this point, we decrease the number of P in the same technique as on the toe of the mitten, but immediately in each R. We bring the loops to one on each knitting needle, and then tighten the thread and fix it on the wrong side of the product. On this needlework can be considered finished, and the mitten must be tried on.

Video: A detailed master class for knitting mittens with knitting needles

Patterns and photo instructions for knitting mittens for men

Knitting mittens you can bind yourself and your loved ones, because. this accessory is always needed. You can knit warm, double winter mittens, or thin ones for the off-season. We have compiled a large selection of different mittens so that you can choose the most interesting models. Mittens can be knitted with a jacquard pattern, an openwork pattern or beautiful braids.

Knitting mittens- the process is not complicated, the main thing is to understand the basic knitting techniques. And then you can start experimenting. The easiest way is to knit mittens with the front surface and decorate them with appliqué or embroidery to your taste. Embroidery with ribbons or woolen threads looks very nice on mittens. Some craftswomen go further, they crochet beautiful appliques, decorate mittens with beads, rhinestones and multi-colored patterns.

Knitted mittens, decorated with braids and arans, are a real art. Of course, not every craftswoman is able to knit complex patterns right away like this. But, if you set a goal and practice knitting arans for a start, then you will surely be able to knit any pattern. You can do it easier - find a good video - a master class on knitting mittens on youtube.com. At the end of the article, we will definitely offer you some videos, maybe you will like them.

For those who do not know how to knit or crochet mittens, the option of knitting mittens on a machine may be suitable. I never thought that even mittens could be made on a knitting machine. But, our readers sent several models.

Knitted mittens. Descriptions from our website

Knitted mittens with star pattern

Traditional "Norwegian stars" will decorate soft mittens. You will need: 50 g each of Permin Qual Navia Trio white and light gray yarn (100% wool, 120 m / 50 g); a set of stocking knitting needles No. 3 and No. 3.5.

How to knit mittens with knitting needles with a complex pattern

To knit mittens with knitting needles, you will need: 2 skeins of 100 g each (each approx. 126 m long) of straw-colored yarn; a set of stocking needles number 8 (5 mm) or a diameter that will allow you to knit a sample; auxiliary needle for knitting braids.

In addition to magazine works, readers send us a lot of beautiful knitted mittens.

We knit mittens with knitting needles with our readers

Openwork mittens knitting

Light openwork snow-white is perfect for winter with moderate cold (up to -15). Ellen's work. Thanks to the interweaving of a shiny thread, the mittens remind of the brilliance of freshly fallen snow in the bright sun, and the presence of wool (20%) in the yarn will not allow fashionable women to freeze even in a fifteen-degree frost.

Knitted mittens with owls

These mittens were knitted by Tatyana with knitting needles from Camtex yarn (Argentinean wool).

Knitted mittens with jacquard patterns - works by Marina Temerova

Always make a pattern before knitting. This will help you correctly calculate the required number of loops.

Knitted mittens. Master class from Olga

Yarn “Bebe Batik”. Acrylic 100%, knitting needles No. 2.5. We collect 48 loops, distribute them on 4 knitting needles, 12 loops on each. We knit with an elastic band 1X1 30 rows. Then we knit 4 circular rows with the front surface.

Jacquard mittens knitting. Love's work

Jacquard mittens. Composition-wool, semi-wool. On an average female hand, medium thickness. Wash by hand in warm water.

Mittens Bullfinches. The work of Lyubov Afanasyeva

Mittens "Bullfinches" with pom-poms. Associated with the addition of downy thread. The mitten itself is knitted. The application "Bullfinch" is crocheted and made voluminous. Details are firmly sewn on. Perfect for an exclusive gift.

Mittens spokes Patriotic. Love's Work

Mittens “Patriotic”. For a long time I wanted to knit men's mittens with an ornament, I found a suitable scheme, and then I safely forgot about it in the hustle and bustle of affairs. Well, she recently caught my eye again, so it went. Good for a gift for "February 23". Although, some women themselves also want these.

Children's mittens Cheerful sheep

Knitting mittens from your fingertips is a great way to get a neat rounded blunt top of the mittens.

This method is distinguished by a peculiar set of loops, which is also used for knitting socks from the fingertips. For a set of loops, you need 2 knitting needles, which you hold in parallel in your right hand. Make the initial loop, leaving a small end of the thread for the cast-on and put it on the second knitting needle from you. Place the ends of the threads in your left hand as with a classic set of loops.

Knitted mittens with an openwork pattern

Mittens knitted from goat down and angora.

Knitted mittens with owls. Author Lyubov Afanasyeva

Mittens with "Owls". Mittens are knitted from Troitsk yarn “Simple” (wool mixture-200m/100g) of white color in one addition - the main background.

Knitting mittens - interesting models from the Internet

interesting selection on the site 37 children's models only

Pattern knitting pattern:

Mittens "Cranberry" from Nosova Tatyana

Merino yarn 50% merino wool, 50% acrylic, 200m/100g, consumption less than 100g, knitting needles No. 2.5

Mittens with Magic Mirror needles (designer Kristel Nyberg)

Mittens transformers knitting Vasama

A fashionable model of women's mittens with a free description of knitting with a beautiful pattern. But that's not all, they are easily transformed into mittens to open fingers and easily send sms from a mobile phone, which is convenient for young people, and not only for young people.

Beautiful knitted mittens with a jacquard pattern

Designer: Adrian Bizilia

Mittens are knitted from bottom to top. First, the outer part is knitted, then loops are raised along the inner side of the dur-cord and the lining is made.

Both mittens are the same, that is, there is no left and right, which means they can be worn longer.

Knitting mittens

For those who crochet, we suggest going through where you will find several models of crochet mittens.

Knitting mittens video

How to knit mittens with owl knitting needles

double knitting mittens

Mittens are knitted for a girl of 5 years. Used yarn Pekhorka Children's novelty, knitting needles No. 3.

The video should load here, please wait or refresh the page.

Knitted mittens with a pattern

Mittens are knitted from 100% Merino yarn, 50 g / 125 m, Italy, with stocking needles No. 3.5.

The video should load here, please wait or refresh the page.