The truth is in the legs. How NBA players use sneakers for other purposes. How to color Converse sneakers What can be written on sneakers

Helpful Hints

Many of us wear sneakers or sneakers because they go great with jeans and other casual wear.

But, if you are tired of your usual sneakers, and you would like to make them fashionable and original, here are a few ideas that can be implemented using improvised materials.

DIY sneakers

sequins

Sequins can make a big difference in the look of regular sneakers.

You will need:

· PVA glue

· masking tape

Gold glitter (about 50 grams)

Small sponge

Place old newspapers inside the sneaker, and tape over the places that you do not want to cover with sparkles. Mix glitter with PVA glue. Cut off a piece of sponge and start applying the glue and glitter mixture to the sneakers. Wait until the mixture dries and then add another layer as desired.

sequins

This project will take a little more patience and time, but you will like the result.


You will need:

Sequins

・Thread and needle

Plaster or thimble

It is best to cover your fingers with a band-aid or use a thimble, as it will be quite difficult to sew a needle through the dense material of the sneaker. Sequins need to be sewn one at a time to sneakers until you cover the entire desired area.

Sequins and rivets


Another option is to use sequins and studs to decorate sneakers.

You will need:

Silver sequins

· Silver rivets

Old newspapers

Remove the laces and place old newspapers or plastic bags inside the shoe. Tape the sole of the shoe with tape. Glue the rivets to the sneakers and press well. Glue mix with glitter and a sponge, apply to the rest of the sneaker.

Ribbons


You can try to replace the laces on sneakers or sneakers with beautiful ribbons.

Stylish sneakers

Rivets


You will need:

・Gold-coloured rivets

Pair of sneakers

· Wooden stick

Squeeze some glue onto a wooden stick and dip each rivet into the glue to secure them to the surface in the desired pattern.

ombre

The ombre effect remains in style and is used in everything from clothes to manicures and hair.

You will need:

· Orange or yellow paint

· White sneakers

· Toothbrush

Remove the laces and dip the front of the shoe 1/3 into the paint. Wet the cloth and spread the paint with the cloth. Hang to dry. After drying, clean the sole with baking soda water.

D For this project, you will need to cut out the front of the shoe.


You will need:

Lace

· Scissors

・Thread and needle

Remove the laces and completely cut off the tongue of the sneaker and sew on lace instead. So the sneakers will breathe better.

How to decorate sneakers

Zebra pattern


You will need:

Black paint

Glitter (optional)

Old newspapers

Place old newspapers inside the sneaker. Cut pieces of tape into long strips of arbitrary shape and glue to the surface of the sneaker. Tape the bottom with tape. Then paint the sneakers with black shoe paint and let it dry. After that, remove the tape, and you have a zebra pattern ready.

Gladiator sneakers


You will need:

Pair of high top sneakers

· Stationery knife

For safety, you can bandage your hands. Turn the tongue inside out and slit in the right places to create a gladiatorial effect.

Galaxy


You will need:

· Brushes

Sealing spray

Glitter paint

Cover the bottom with tape. Using a sponge or brush, apply different colors of paint to sneakers. To create a starry sky effect, take some white paint on your toothbrush and use your finger to splatter it onto the surface (you can also use glitter paint). Once dry, apply a sealing spray.

Beautiful sneakers

geometric design


You will need:

· Fabric marker

Scotch tape (optional)

Remove the laces. With a fabric marker, start drawing the herringbone pattern. To make the drawing even, use tape.

Here is another version of the drawing that can be done using multi-colored markers.


Lace sneakers

You will need:

Lace

Glue for fabric

· Scissors

Cover the surface of the sneaker with glue and glue the lace on top. Cut off the excess parts with scissors.

IN from another way to use lace for sneakers.

You will need:

Lace

· Scissors or utility knife

・Thread and needle

Cut out the part of the sneaker where you will use the lace and sew it on with a thread and a needle.

The Lantern blog shows how ordinary shoes in the NBA take on additional meaning.

Most NBA players have such strong personalities that it's hard enough for them to confine themselves to the boring confines of a basketball uniform. A variety of accessories, of course, can personalize the image, but the only things that are truly unique are sneakers, either custom-made or hand-finished.

The latest trend in the league is straightforward: last week Lance Stevenson became the third player to have a portrait of the player on his shoes.

His predecessors were Amir Johnson.

AND Tracey McGrady.

Probably, “portrait” sneakers do not carry any special semantic function. Although who knows.

Another tradition is much more stable: sneakers, as, in fact, the only part of the appearance that players could somehow transform, became a logical place to emphasize motivation or express their attitude to certain events.

The most typical example is Mark Jackson who put on a wedding ring on laces. The point guard acquired this habit back on the streets of New York, where he played in the summer: initially he was forced to do this, since there was no room for valuables. But then he remained true to this custom, and the ring also acted as a motivational factor during matches, reminding him of his wife and children.

Once upon a time, the Houston defender did exactly the same thing. Kenny Smith- right up to the time when he gave his sneakers to the fan, forgetting about the ring.

In other cases, you don’t need to bind anything - you can just write.

So does Stephen Curry, which has had the inscription "I can do anything" since my student days.

Or Roy Hibbert, on the eve of the 7th match of the final series of the East, reminding himself: “I am an animal”, “Concentration”.

John Wall's desire to be in the playoffs is so huge that he intends to ruin 82 pairs of sneakers with the monotonous word "playoffs".

Motivation can change. For example, in his last season with Dallas, Jason Terry he was concerned only about the most important thing: his sneakers had the inscription CTC - “Cut the check”, hinting to Mark Cuban and the rest of the owners that Jet would soon become a free agent and demand money for his services.

During the season, Terry revised his principles and changed the inscription to DTT - defend the title. Which, however, did not help him.

Terry even pulled gold "champion" shoes out of the garage when the Mavericks went on a losing streak.

But it's not just about motivation.

It often happens that players respond to some significant or tragic events with the help of inscriptions on sneakers.

So did Chris Paul, who remembered .

Prior to that, he supported Barack Obama in the elections.

Or LeBron James and Dwyane Wade, who also reacted to the death of a 10-year-old girl, and then expressed their attitude to the high-profile murder of Trayvon Martin.

Andre Drummond, for example, inscribed the names of 26 children killed in the attack on Sandy Hook School last year.

Kevin Durant on the same sad occasion, he limited himself to the name of the city - Newton.

The same Durant in the last playoffs supported friend Russell Westbrook, who dropped out due to injury, with the word “zero”.

Did the same and Kendrick Perkins, with "Lil Homie #0" written on both legs.

And in a match with the Russian national team at the 2010 World Championships, Durant's sneakers had the number "1972" - the Americans still cannot survive the defeat in the Olympic final.

The reasons may not be so dramatic, and the inscriptions are not always transparent.

Andrew Goudlock marked the signing of the contract with the Chinese Peak with a simple welcome message. True, in Chinese.

There may or may not be any reason at all. For example, in Duke's women's team Karima Christmas and Vanisha Smith they are just addicted to decorating sneakers according to their talents. Among other beauty, they featured quotes from Eleanor Roosevelt and Nelson Mandela: "The future belongs to those who believe in the beauty of their dreams" and "Our deepest fear is that we are overly strong."

One of the main antagonists in the modern NBA Tim Duncan and Kevin Garnett showed a difference in character in terms of the design of sneakers. Both presented completely unique projects, both showed imagination, but each in his own way.

On Halloween, Tim came out in "skeletal" sneakers, highlighting his individual features in an almost x-ray way.

Kevin Garnett also performed extraordinarily bright, but in his own inimitable style. One of the matches with the Lakers was used as a convenient excuse to troll hard-core opponents and show off the most outrageous sneakers of modern basketball.

Although it is clear that he is still far from Iman Shumpert.

Master class for you! I love fashionable things, and always on the same wavelength with the trends of the season. I just have a terrible shopping addiction, I was born to be a shopaholic and a fashionista, but I don't have a problem with that anymore. When I am in my dressing room, I become the happiest girl on the planet.

I like to travel and learn new things. I acknowledge it and enjoy it. But often my views change categorically, and every day, I have to buy at least one fashion item, and this is already a big problem. Oh, by the way, check out the article But, I found a solution, and I want to share it with you.

How can you decorate your favorite shoes yourself, at home, without going anywhere for help? Very simple!

DIY Fashion

It only takes a few things to give your loafers a trendy new look. First, take inspiration with you. We also need: scissors, pieces of leather, glue gun, paint. Everything, now you can start working. Follow the instructions in the pictures.

Make your sneakers stylish

In order to make sneakers colored, you just need a little imagination and colored markers for shoes.

Shine

A little romance

We will need fabric, scissors and glue. Get to work.

Stylish pumps

We take a multi-colored spray, and begin to create.

A little bit of rock

Everything is simple here. We take rivets and get to work.

Modernize your conversions

The use of rivets will breathe new life into your converse.

Applying Glitter

How about covering the converse with glitter in all places? Look at them. They are fantastic!

Replacing laces

Drawing

Use your imagination and creativity to color your sneakers with special clothing markers. This is very easy to do and your sneakers will look unique.

Comic shoes

We take our favorite comics, glue and create.

some cloth

Such beauty can be made with just a cloth and glue.

flip flops

Tutorial: Make your own flip flops

We take the fabric, and already prepared flip flops.

Follow the instructions in the image.

Tie the ends tightly.

We cut off the excess.

We turn over. Tie tightly at the top.

We make two additional holes and also tightly tie.

We cut off the excess.

In order for our flip flops to serve us for a long time, we fix all the knots with glue.

And here is the result:

Decorate the heel with pebbles

We will need: pebbles, shoes, glue, tweezers

Pour the glue into a convenient dish, wet the pebble there.

Attached to the heel.

As you can see, the result is amazing.

Petal sandals by Louboutin

We need: Threads, scissors, fabric, needles.

We cut out petals of the same size from the fabric, and attach them to the ribbon.

We attach the petals to the shoes.

And here is the result, it turned out no worse than in Louboutin.

Shoes with chains

Everything is simple here: sandals and chains.

When warm days come, more and more often on the street there are our favorite sneakers. In addition to being very comfortable, beautiful and practical, these shoes attract a lot of attention from handmakers, as you can decorate sneakers with your own hands in a beautiful and very original way. Bright colors break the boring everyday life, make you look differently at the things around us. They can turn old shoes into a very interesting weekend piece. Consider some interesting ideas for decorating sports shoes that you will definitely like.

Decorate shoes in the style of Miu Miu

In order to decorate sneakers, you will need:

  • Pair of white.
  • 250 g of small sequins.
  • 50 g of large golden sequins.
  • 1 medium and 1 small brush.
  • Rhinestones of various sizes.
  • Small plastic tray.
  • Good glue.
  • Duct tape.

Sequencing:

  • It is necessary to start work by covering the soles and toes of the shoes with adhesive tape.
  • In a small container, mix small glitter with glue in a 2: 1 ratio.
  • Stir the mixture well with a brush.

Important! The resulting mixture should be thick enough, but not pasty.

  • Then apply a layer of shiny mass to the surface.
  • Apply a second layer after 15 minutes.

Important! If necessary, apply a third coat until no non-glitter spots remain.

  • Use the tip of your fingernail or a small knife to scrape off the excess glitter.
  • Remove adhesive tape.
  • Glue large rhinestones and sequins on the socks of the sneaker, folding them in a pattern that you like.

spike decoration

Another way to decorate sneakers with your own hands is to decorate with spikes.

For this option you will need:

  • A pair of shoes.
  • Metal cone-shaped spikes - 150-200 pieces.
  • Glue.
  • Popsicle stick or disposable spoon.
  • Toothpicks.

Sequencing:

  • Squeeze some glue onto a stick or spoon and apply to the tip of the spike.

Important! It is better to use a small amount of glue at a time, as it dries quickly.

  • Attach the cone to the surface by pressing it into place for a couple of seconds.
  • Continue fixing the spikes along the line of the sole and with horizontal lines just above the first row at the toe of the shoe.

Important! Before you start attaching the decor in hard-to-reach places, you must first try on the spikes without glue, and then attach it with it.

  • Continue gluing spikes along the heel line horizontally.
  • Leave to dry overnight.

Sequin decoration

Shoes will look very stylish and unusual if you decorate sneakers with your own hands using sequins. For this you will need:

  • A pair of shoes.
  • Sequins.
  • A thimble or patch.
  • Needle and thread.

Important! It is best to use a thimble or wrap a band-aid around your fingers, because it will be quite difficult to pierce the needle through dense material.

Sequins are sewn to the sneakers one by one, until the entire area is completely covered.

ombre

The ombre effect is in fashion today and it is used in everything from hair and manicure to decorating clothes. In order to update sneakers with your own hands in this way, you will need:

  • Pair of sneakers.
  • Yellow or orange paint.
  • Soda.
  • Toothbrush.

Sequencing:

  1. Remove the laces from your shoes.
  2. Dip part of the sneaker ⅓ into the paint.
  3. Moisten a cloth with water and use it to spread the paint.
  4. Leave to dry.

Important! After the sneakers are completely dry, clean the soles with baking soda and water.

Zebra pattern

A very interesting option is shoes with a zebra pattern. To make them you need the following:

  • A pair of light-colored sneakers.
  • Black paint.
  • Scotch.
  • Old newspapers.

Sequencing:

  1. Place old newspapers inside.
  2. Cut pieces of adhesive tape in the form of different long strips, stick to the surface.
  3. Tape the sole with tape.
  4. Paint the shoes with black shoe paint and leave to dry.
  5. Remove the tape after drying.

gladiatorial

In order to make very interesting gladiator sneakers with your own hands, you will need:

  • A pair of high tops.
  • Sharp utility knife.

Important! For your safety, you can bandage your hands.

Turn the tongue of the shoe inside out and make cuts in the right places to create the look of a gladiatorial shoe.

Galaxy

Painted fabric sneakers look very nice at home, for this you will need:

  • A pair of light-colored sneakers.
  • Sponges.
  • Paints.
  • Brushes.
  • Glitter paint.
  • Sealing spray.
  • Scotch.

Sequencing:

  1. First you need to paste over the sole with adhesive tape.
  2. Next, with a sponge or brush, start applying paints of different colors to the surface of the sneaker.
  3. In order to create the effect of a starry sky, you need to take a small amount of white paint on a toothbrush and spray it onto the surface with your finger.
  4. Leave the sneakers to dry.
  5. After complete drying, apply a sealing adhesive to the surface.

For some, the exclusivity of shoes is everything, but not everyone has the money to buy new Nike or other brands for prices that often exceed $300. Although the concept of exclusivity is rather vague, someone really believes that buying only released sneakers will be exclusive and does not think that someone also has them, and someone takes their old sneakers and makes them truly exclusive sneakers. Now we will tell you how to make exclusive sneakers, and based on this, you can create your own unique sneakers.

Step 1: Materials

First of all, you need to have at hand all the necessary materials. If you're going to dye your sneakers, you'll need a brush, sponge, or similar dyeing tool. For leather, you need to buy a special paint, and for other materials, another (how to distinguish genuine leather from artificial). It is also advisable to have rubber gloves so as not to smear your hands, some surface on which you will do all this, it will also not be superfluous to have adhesive tape to seal areas that you do not want to accidentally paint over.

Step 2: Preparation

If you are going to paint sneakers, be sure to prepare the surface, you do not want the paint to peel off over time. Put on gloves and moisten cotton swabs with acetone, after which you will need to clean the surface so that it is ready for applying a special solution and paint.

Step 3: Surface preparation

Okay, you have applied a special solution to the material so that the paint lays well on the skin and is ready to be painted. Now decide which parts of the sneakers you will paint and which ones you will leave the same. Cover the areas that you will not paint with adhesive tape, very carefully and carefully so that if paint gets on them, they do not deteriorate.

Step 4: Paint selection

Now we can paint, but we need to choose what color, whether there is one or whether it needs to be obtained by mixing several colors. In general, you yourself will figure it out, this is a matter of taste.

Step 5 and 6: Applying paint

The paint must be applied carefully, in thin layers and preferably in several layers, to avoid stripes and bumps. Before applying the next layer, always check that the previous one is dry. Also, if you want to combine several colors, it is also advisable to carefully seal the areas where there will be a different color with adhesive tape, so that if you climb into this area, you will not spoil all the work.

Step 7 and 8: Fixing the Mistakes

If you still disobeyed our advice and did not seal the unused areas with adhesive tape, and accidentally got paint on them, you will have to carefully wipe it off with any solvent. There will also be a lot of small details that will have to be corrected with a thin brush, and it is important not to rush anywhere so as not to spoil everything.

Step 8 and 9: Finishing the Job

When all the paint work is over and the paint has dried, it is advisable to go through the hair dryer again to dry the sneakers for sure. After the paint has dried, it is advisable to apply a finishing agent to set the paint and improve its effect. In any art store you will be prompted which tool is best.

Step 10 and 11: Presentation

After all the work is over, you can admire your creation, and most importantly brag to friends and people. Feel free to put on your new sneakers and look at the views of people passing by.