Crochet knitted hat scheme 91. Crochet summer hats. Scheme. Crochet women's hat

One of the favorite headwear models for women is hats. Their popularity never goes away. Every
season, new models appear. The article offers a selection of crochet knitted spring and winter hats.

The easiest crochet hat for beginners

Simple yet stylish for beginners

Let's start the analysis of crocheted hats with a model for beginners from melange yarn. It is connected only with single crochets. It is offered to her.

Size 56 cm.
You will need:
- 300 grams of yarn of medium thickness (for example, Lanagold 240);
- knitting needles No. 7, hook No. 3.5.

Hat knitting description:

1. Cast on 2 air loops and knit 6 st.b / n in the first loop. Knitting goes in a circle. On the next row, double the number of stitches. Then continue to work, adding in each p. six st.b / n. until you reach a diameter of 17 cm.
2. Then continue straight without adding 9 cm.
3. For fields, add 1 st.b / n to every 3rd column. Then knit 5 cm without additions. Along the edge of the hat, make 1 row with a “crustacean step”.
4. Scarf: knitting goes in the transverse direction. Cast on 180 sts. and work in garter stitch for 20cm.

Delicate crochet hat

First we knit, then we knit

Soft fluffy warm hat crocheted with single crochet. The shape resembles a bell, decorated with buttons and horizontal stripes.
Size: 56 cm
You will need:
- yarn 50% lamb wool, 50% angora - 100 grams;
- hook number 4;
- some threads for finishing;
- two buttons.

The hat must first be crocheted, then felted in a typewriter (optional).

Sample making:
Cast on 21 chain stitches and work a tester with several rows of st.b/n. and try to bind it. To do this, put it in the washing machine with other things, put the washing powder, set the program to high temperature. Flatten the sample and dry. It should be 9*8.5cm. Alternatively, you can tie several probes with different hook numbers. In order not to forget what number the sample is associated with, mark them with different threads. Wash all probes. Which sample will fit the desired size, take that hook number for knitting.

Crochet hat knitting pattern
Knitting starts from the crown. Cast on 4 sts, close in a circle. Work 1 single crochet in 1 st.

Next, we knit the part with an overlap. We will do this in turn rows:

Tie 2 times the fourth p.
33 p.: Take a cotton thread and stretch it along the edge of the hat, leaving 10 cm from the edges. Tie another row of single crochets (like 4 rows), along with this complement. thread (to strengthen the edge).

Legend:
vp - air loop
hc - chain loop
sc - single crochet
psbn - single crochet

Completion:
Pull the thread at the top, secure tightly. You will need a blank to dry the product. For example, a jar or planter for flowers with dimensions of 14cm at the top, 18 at the bottom and a height of 15cm. Tie the hat in the typewriter, as described above, pull it over a blank and dry it. As soon as the cap dries a little, try to pull it up to your head size, then leave it to dry further.
Sew a piece of planochki from the inside. Take a contrasting yarn and embroider 2 braids around the hat.

Elegant retro hat crochet hat

Spectacular spring crochet model

Size 56-58 cm
You will need:
- Qual Merino Cotton yarn (52% Merino, 48% Egyptian cotton, 120 m. 50 gr.) - 150 gr.;
- hook number 4.
Density: 20 embossed posts = 10 cm

Description of work and knitting patterns for hats
Embossed double crochets: knit in front or back in a double crochet p .. Circular rows start with two lifting air loops instead of one relief column. s / n and finish with the 1st connection. pillar. into the second air lifting loop. We double the relief stitch by knitting two of the 1 sts of the previous row.
Crochet 3 air stitches, with one connecting stitch. enclose in a circle and knit 1 p. embossed st.s / n like this:
1 row: 12 columns s / n;
2p .: * double 1 embossed. st.s / n in front, 1 relief.st s / n behind - repeat 5 p. (= 18p.);
3r.: * 2 relief st.s / n in front, 1 rel.st.s / n double behind - 5 times (= 24p.);

Video master class of a crochet knitted women's hat from Irina Sherekina:

In black and white - always relevant!

Classic black and white color is always relevant

The next model of a warm crochet hat is a black and white classic bell hat.
Size 56 cm
You will need 100 grams of pure wool yarn of medium thickness in b / w scale, hook number 5.
Knit the product with single crochets (SC), catching them on the upper half loop.

How to crochet a hat with brim?
Start knitting from the top. First, we knit a chain of three air stitches, then knit 6 columns of b / n (SBN) into the last loop from the hook. Continue working in SC in the top st, inc 6 SC evenly in each round. When the diameter of the circle is 12 cm, add after 1 row: 1 p. without increments, 2nd p. - add 6 STB until the folded product is 27 cm. Then 12 cm without additions.
Let's move on to the brim of the hat. It is necessary to divide the marker into 6 sectors and tie 9 rows, adding 1 STB for each marker. The hat is decorated with an artificial flower.

Hat "French chic" crochet

Cloche means bell in French. It was from there that the fashion for stylish neat models of hats with small fields of a slightly expanded shape came to us. In the 20s of the last century, women rebelled against conservative stereotypes in clothing, refused corsets, long dresses ... And, of course, the new style required new headdresses. This beautiful style is again relevant. How to crochet a small cloche hat?

Size 56-57 cm
Required:
- tone-dyed yarn (15% wool, 25% polyester, 60% acrylic, 875 meters per 350 g);
- hook number 7;
- a pin, tulle, silk and rhinestone for a flower.

Attention! We will knit a hat in two additions, follow the color transition.

1. We start with the crown. From the chain 5 air.p. knit 9 sc. In the second r. double the number of bars (=18).
2. We continue to knit in a spiral, making in the 3rd p. 8 increments, and in each next.r. - 6 additions. We add until the moment when pet. will not be 56.
3. Then knit straight to the height of the crown 17cm.
4. For fields, you need to make 8 additions in 2 p. in a row (= 72), then 4 p. without additions. The last r. - step step.
5. Tie a cord 70 cm long and stretch it at a level between the crown and the brim.
6. We make a flower. Cut out 8 circles of 10 cm for the petals, fold each twice in half and sew in the middle. Under the petals there will be a ruffle from a strip of tulle, in the center - a rhinestone. The flower is pricked on a pin and attached to the hat.

Gorgeous summer knitted hat - panama with an orchid.

Yarn Rose (50 g - 150 m), hook No. 1.6
We knit the bottom according to scheme No. 1 to the desired diameter.
Next, we knit without increments (to the ear)
Then 3 rows of single crochets.

Hat brim:
scheme number 2, we knit without increments. The fields are obtained by a "cone". Tie with single crochets. A whalebone is inserted into this row (you can use regilin or a thick fishing line).
A wire is inserted into the last row of the flower binding.

Orchid.
Threads No. 40, 5 g. pale pink and a little pink, bright pink, pale yellow and yellow. Hook 0.75. Wire #26 and #24 Just thin wire).
With a pale pink thread, tie a chain of 30 in / p and knit according to scheme A (3 petals). With a pale pink thread, cast on 20 loops for petal B (2 petals). . Knit in straight and reverse rows. Row 1: Ch 1, 1 sc in 2nd st from hook and in each of next 5 sts (6 total), 1 dc in next 6 sts, 1 dc in 8 warp sts. Air loop, turn knitting, sc / bn from each loop of the previous row, and in / p of the initial chain. 3-4 rows knit according to the scheme. In the diagram, the columns are respectively: with the 1st dash - st / sn, 2nd - st with 2 crochets, with 8 dashes - with 8 crochets. Pay attention (I did not immediately notice), at the very top of the petal there are 3 columns with 10 crochets!
tongue. 1-5 rows. With pale pink thread, knit in straight and reverse rows according to the scheme, on the 5th row, form a picot of 4 loops over the central column. 6-8 rows. Attach the pale yellow thread to the central picot of the 5th row and knit according to the scheme, using the connecting posts at the junctions. 9-10 rows. Attach pink thread for 9th, and hot pink thread for 10th Continue knitting according to the scheme
Middle. With a yellow thread, knit 3 rows according to the scheme.
Assembly. Pass the wire No. 26 into the middle, as shown in the diagram. Shape the petals and thread the wire as shown in the diagram. Connect the petals, as in the picture, cut off the excess wire.

Orchid knitting pattern.

A knitted openwork hat is a stylish and elegant addition to women's summer outfits. In such an attractive and romantic accessory, a woman will look mysterious and original. Hats knitted independently look especially elegant. Look at the proposed summer hats for women with a crochet pattern and description in this article, choose the right model for yourself and get to work.

Summer knitted hat for women

We start knitting a hat from the crown with single crochet stitches (CC1H). We work in a circle, moving to the fields.

For them, a diagram is presented depicting the beginning and end of each circular row. Using the description, the model can be knitted in any of the calculated sizes.

Sizes: S-M; L-XL.

Head circumference: 54-56; 58-60cm.

We will need:

• yarn, 100% cotton, 50g per 100m - 150; 200g;
• hook No3.

Density: 22 CC1H for 11 rows, you get 10cm by 10cm.

Description

Note:

• we start from the crown and go around, knitting columns with one crochet (CC1H). The pattern for the fields - see diagram A.1, the transition from one row to another - see diagram A.2;
• decreases: tie 2 CC1H with a common top;
• increments: tie 2 CC1H from one p. of the base.

We collect a chain of 5 air loops (VP) and close them into a ring with a connecting column (SS). Next, knitting is performed using the description:

• 1cr.r.: 11 sts with 1H in the ring;
• 2 cr. R.: 2 sts with 1H in each loop of the row;
• 3 cr. p .: * 2 sts with 1H in the next / first st with 1H, 1 st with 1H in the next. stlb with 1H * - from * to * repeat for the entire row. Total 33 CC1H;
• 4 cr. R.: * 2 sts with 1H in the next / first st. with 1 nak., 1 CC1H in the next. 2 СС1Н * - from * to * repeat for the entire row. Total 44 CC1H;
• 5 cr. R.: * 2 tbsp. with 1 acc. to the next/first post. s / 1n, 1 tbsp. with 1 acc. in the next 3 art. with 1 stitch, * - from * to * repeat for the entire row. Total 55 CC1H.

We continue knitting, using these instructions. We make increases in each row, we finish at 9p. In work 99 CC1H.

Further knitting of summer hats for women will be prescribed separately for two sizes.

Summer hat size S-M

10 cr. R.: * 2 tbsp. with 1 acc. in the next / first art. with 1 nak., 1 tbsp. with 1 acc. in the next 10 st. with 1 stitch, * - from * to * repeat for the entire row. Total 108 Art. with 1 acc.

We perform further knitting of a hat for women in a circle, knitting CC1H in each p. Having received 16 cm, in the last kr. R. subtract 3 columns at regular intervals. 105 pillars remain. s / 1n.
We knit the fields according to the images of scheme A.1. At the same time, we repeat the rapport of the pattern pattern 15 times. We finish knitting in 9 cr. R. scheme. By this time, we should have 135 b/n stlb. We break the thread, fasten and carefully hide the end.

Summer hat size L-XL

10 cr. R.: * 2 pillar. s / 1 in the next / first CC1H, 1 column. s / 1n in the next. 8 pillar. s / 1n * - from * to * repeat for the entire row. Total 110 СС1Н;

11 cr. R.: 1 column. s / 1n in the first 2 columns. s / 1n, * 2 SS1N in the next / first column. s / 1n, 1 column. s / 1n in the next. 17 СС1Н * - from * to * repeat for the entire row. Total 116 pillar. s / 1n.

Then we knit CC1H in the round until we get 17cm in height (measured from the first row). In the last row, we decrease at regular intervals 4 CC1H. We continue knitting hats for women according to cx. depicting a pattern for fields.

Rapport is repeated 6 times in a circular row. Having completed the last, 9th p., We get 144 stlb b / n. We break the thread, fasten and carefully hide the end.

Summer hat “Sea Dreams”: video MK

Summer hat with wide brim

We will need:

• fine cotton yarn - 200g;
• hook No1.

Description

We knit a hat with a wide brim for women according to the scheme, placing the lifting loops along the edge of the fan strip.

The symbols of the given scheme are standard. For beginner knitters on our website there is a detailed article with detailed illustrations on this topic.

The finished product must be starched and ironed.

• yarn containing 50% cotton, 50% polyacrylic (50g per 80m), melange gray-turquoise - 150g;
• yarn containing 78% cotton, 22% polyester (50g per 100m), blue - 100g;
• hook No3,5 and No4.

We will need:

• motive "Fan": performed according to the instructions of the scheme.

The designations for this scheme, as well as for the previous one, are standard, you can clarify them in the same article on our website.

The figure of the diagram fully shows the 12th circle. R. 13th p. and subsequent ones contain only a fragment of the motif. We use it for knitting on all cr. R. We finish each row with one connection. stlb in the initial air. P.

In a schematic representation of 19 p. rapport is shown, it should be repeated on all loops. The transition between rows is carried out according to the instructions of the scheme.

We knit circular rows of hats for women containing “Fan” motifs with blue yarn, for the remaining rows we use gray-turquoise melange. The last SS of the last cr. R. we knit with a gray-turquoise melange with a blue thread and behind each kr. R. with blue yarn we attach a gray-turquoise thread to the 3rd VP of the last "Fan".

From the 1st cr. R. on the 19th cr. R. knit once, then repeat from 16 cr. R. 19 cr. p., performing additions - see description below.

Important note

For the “Fan” motif, all rows must be knitted in the same direction.

Density: 20p. original r. (without the motive "Fan") for 12 kr. R. it will be 10cm by 10cm.

Description

We knit a chain of 8 VPs with gray-turquoise melange, close it in a ring 1 SS. We carry out further knitting according to the scheme, making additions.

Having knitted 12 kr. R. (this is 10cm), we completed 29 rapports and have 116p. At this point, the hat is tied to the middle.

From 13 kr. 22 kr. R. knit evenly, without additions.
Next, for the fields, we perform single crochet increases - see the description below. All added loops are included in the pattern.

23 cr. R.: * from each 4th loop of the base we knit 2 sts without a crochet * - from * to * repeat 28 times. We get 144p .;

27 cr. R.: * from each 4th loop of the base we knit 2 single crochets * - from * to * repeat 36 times. We get 180p .;

31 cr. R.: * from each 4th loop of the base we knit 2 sts without a crochet * - from * to * we repeat 44 times. We get 224p .;

35 cr. R.: [* from each 6th p. of the base we knit 2 sts of b / n * - from * to * repeat 8 times, from each 8th p. repeat three times. We get 260p., Which is equal to 65 rapports.

Having knitted up to 30 cm (this is 36 kr. R.), we complete the work.

Crocheted raffia hat “Vasilisa”: video MK

Selection of schemes

An openwork summer hat with a wide brim is simply indispensable in the wardrobe of the fair sex at any age.

hat first

Knitting pattern

Crocheted summer hats are not only an occasion to do needlework, but also an opportunity to acquire a wonderful and useful thing for the summer.

Second hat

Knitting patterns:

The hat will protect your head from the annoying and tiring sun, add tenderness and femininity to your image.

hat third

Knitting patterns

Crocheted summer hats are a comfortable headwear.
hat four

The skin of the face does not tolerate prolonged exposure to the sun.

hat fifth

You will need 200 g of yarn, some lurex and hook number 1
Tie the bottom with a diameter of 16 cm according to the scheme.
Then knit with a tulle 8 cm high.
And finish with fields 18 cm wide.
Tie the fields with Lurex according to the scheme.
Starch the hat and dry it into shape.

6. Original hat, made in one motif

With a knitted summer hat with a wide brim, you can protect your face from the scorching sun.

hat seventh

A wide-brimmed knitted summer hat is perfect for going to the beach or protecting from the scorching sun while walking around the city.

Hat eighth

Hat 9

Hat 10

Yarn Troitskaya Astra (610m/100g) 100% mercerized cotton.
It is knitted from above, a pancake approximately according to this pattern

You can knit not 6 wedges with increments in each row, but 12 wedges, two increments in each wedge through the row.

Tula knit according to the scheme

After the pattern, we knit the finishing strip for the ribbon.
Two rows * st.b.n., air *, in the second row of st.b.n. knit over the air of the previous row.
A row of CC2H columns, and two more rows * st.b.n., air *.

Fields of knitting CCH, 24 wedges, one increase per wedge.
Tie reguilin into the edge.

11. Hat knitted from 200 g of mixed ribbon yarn, hook No. 4, wire
diameter 1.5 mm Be sure to tie the sample.

Work begins with a bottom with a diameter of 15 cm.
Then they knit with a tulle 7 cm high according to the pattern.
And finish with fields.
To give a stiffness field, a wire is laid in the last row of columns without a crochet.

Two hats connected with one pattern:

. Red hat. This extravagant hat is easy to knit. Even those who are just starting to master crocheting will be able to replenish their summer wardrobe with such an accessory.
Size 54-56.
You will need: 120 g x / 6 red yarn; hook number 2; wire with a diameter of 3 mm.
The dimensions of the product are shown in Fig. 8. Start working according to scheme 8, after the 8th row (the diameter of the bottom should be equal to
15 cm) knit 5 more rows straight without additions. Depending on the density of knitting, the number of rows with
increments can be increased or decreased. Next, perform 3 rows of RLS around the perimeter of the crown, then proceed
to binding fields. To expand, divide the circle into 8 parts and increase as shown in diagram 8 a.
Knit in this way until the brim is 21 cm wide. In order for the hat to keep its shape, it is necessary
when tying the fields along the edge next to the RLS, lay the wire along the working row and knit the RLS in the girth of the wire.
Decorate the finished hat with a brooch.

Women's knitted hat is one of the most popular accessories at any time of the year. It can be of various shapes and sizes, made with knitting needles of various materials.

It all depends on individual preferences.

One thing is known for sure - to tie a similar headdress under the power of any novice needlewoman.

Hats are different

1. A wide-brimmed knitted hat is relevant in the warm season. As a rule, it is made from cotton yarn. It can be decorated with ribbons, bows and other decorative elements.

Hat "Stranger"

2. Cloche, in other words, a small headdress with small fields. Such an accessory, resembling a bell in shape, was popular in the 20s of the last century. Cloche is back in fashion these days. Depending on the material, similar knitted hats can be found both in summer and in winter.

There are many more different forms and types. However, the ones listed above are the most popular. When working on them, the main thing is the use of hard, fairly dense threads.

The biggest secret is form

Knitting hats begins with the secret of giving them a beautiful shape. Agree that no one wants to spend a lot of time and effort on making a headdress, which in the end will look like a shapeless canvas with fields. Therefore, even before starting work, you should take note of the basic methods and methods necessary for your knitted hat to eventually have the correct shape.

1. Starch and PVA. In a glass of cold water, heat a tablespoon of starch (do not bring to a boil). Sometimes starch solution is used as a spray. As for PVA, it is better to dilute it in equal proportions, for example, 100 per 100 ml. A knitted headdress must be dipped in one or another solution, and then stretched on a pre-prepared frame. Use a jar or large plastic bottle as a frame. The fields will be supported by a cardboard circle, dressed on the main frame.

2. Thick fishing line or regilin, which are tied into fields. Many people like this method of shaping more, since there is no need to repeat the previous paragraph after each wash.

Knitted hat "Stranger"

Knitting hats should begin by measuring the circumference of the head and calculating the appropriate knitting density. The following description of the work is designed for a head circumference of not more than 46 centimeters.

For work you will need:

— circular and stocking knitting needles. The first should be in two sizes, namely 40 and 90 cm;

— wire (thick fishing line or regilin);

— starch solution;

— embroidery needle;

— 100 grams of 100% cotton yarn.

Hats of this model are knitted from the top to the bottom. Remember to switch to circular needles at the right time.

So, cast on 8 stitches using the braided method. Next, you need to mark the middle and close the circle. First, a circular row is performed. This should be done with increments according to the following scheme: 1 front, followed by a yarn, a total of 16 loops. Next, 1 row, follow the usual facial loops. Now the row pattern is as follows: knit 2, then yarn over, 24 loops in total. Knit the next round with knitting needles, using only facial ones. The next row with increases according to the scheme: 3 front, 1 yarn, 32 loops in total. Again, work with the same faces. Next, the next circle with increments according to this scheme: 4 facial, 1 yarn, a total of 40 stitches.

Hat spokes "Provence"

It may seem that knitting hats is a tedious and uninteresting activity, which, of course, is not true. You will not repeat the increase for long and on 11 front loops and 1 yarn over you will move on to the next stage of working with knitting needles. Do not forget only during the increase on each 2 circles to additionally knit 1 facial.

Work 1 round in stockinette stitch. Then the knitted hat moves to loops with broaches. A row is knitted in this way: first, a regular broach, then 10 facial, then 1 yarn over. Repeat the pattern, and tie the next row with simple facial loops. The above steps should be performed until the height from the inlaid edge reaches 10 cm.

Formation of fields

Knitting hats is an interesting activity. At the moment, half of the work has already been completed. Now we have to deal with the formation of fields. This happens according to the following scheme: 12 loops in satin stitch, 1 yarn over, a total of 104 loops. Then perform a row with some facial ones. Further, a knitted hat is made in the usual way - by increasing with knitting needles and an additional facial one in every 2nd circle. You need to complete the increase at the moment when, at the beginning of the circle, you knit 24 loops with satin stitch. 1 row left. After that, you need to close the loops with knitting needles using the cord method.

Final stage

Your knitted hat is almost ready. Thread the protruding ends of the threads and cut off a piece of wire. A knitted hat has a certain circumference of the fields. This measurement will serve as a guideline for the length of the wire. Add a couple of centimeters to the resulting value (to overlap the ends). Use the purl loops and the cord above it to attach the wire to the edges of the headpiece. This should be done, of course, from the wrong side.

A knitted hat should have a shape. This is not difficult to do, because you learned about various methods and methods at the very beginning of work. Apply a starch spray to the finished product and iron the margins gently with an iron.