Knitting medium and long skirts. Knitted and crocheted skirts. Selection. Beige long crochet skirt

A skirt is considered one of the indispensable elements of clothing, which makes the image more feminine. There are a huge number of skirts. Mostly there are models made of fabric.

However, knitted skirts have gained immense popularity among women and have become an ideal addition to any wardrobe. Thanks to knitting, you can also make an exclusive skirt that will attract the attention of people around you.

Let's look at the most popular types of skirts together and try to knit them.

Knitted pencil skirt: diagram with description, photo

Legend:

P – row
P – loop
LP - facial loop
IP - purl loop
KP - edge loop
PV – garter stitch
N – yarn over
LH – facial surface
IG - purl stitch
IR - purl row
LR – front row

A pencil skirt is considered to be a universal and classic skirt. It is knitted using circular knitting needles and will become a real lifesaver for you. We suggest you make a skirt M or 44, since this size is considered the most common.

To make this skirt you will need to stock up on:

Yarn 50 g - 8 skeins.
Circular knitting needles with a length from 60 cm to 80 cm - No. 4 or No. 4.5.

Execution process:

Cast on knitting needles No. 4 140 P. Close P in a ring and knit in a circle like this: 2 LP, 2 IP.
Continue knitting until your work is 5 cm long.
1 R – start knitting with needles No. 4.5: 1 IP, *2 LP, 2 IP*, repeat from one * to the other *. Complete 2 LP, 1 IP.
Knit 2 R and all subsequent even R like this: Knit LP, and Knit IR.
3 R – move the elastic pattern to the left side by 1 P like this: *2 IP, 2 LP*, repeat from one * to the other * until the R ends.
5 R – move the pattern to the left side by 1 P like this: 1 LP, * 2 PI, 2 LP*, repeat from one * to the other *, finish 2 PI, 1 LP.
7 Р – shift the pattern to the left side by 1 Р as follows: * 2 LP, 2 PI *, repeat from one * to the other * until the row ends.
These 8 R make up the main repeat of the pattern in height. Repeat them until you reach 47 cm.
Finish with an even R.
Start knitting with needles No. 4 and knit 8 cm (you can do a little more) with an elastic band in the form of a spiral: 2 LP, 2 PI, moving the pattern to the left.
When you reach 55 cm, bind off the loops. Make sure that the lower P does not tighten, but is also not too loose.

Bulgarian skirt with knitting needles: diagram with description, photo

Thread consumption will depend on what length of skirt you want to end up with. For a skirt whose length is 70 cm you need to stock up on:

Threads - 400 g (a little more is possible).
Circular knitting needles of different numbers, for example, No. 3, No. 3.5, No. 4 (the length of the knitting needles should also differ by 10 cm).
Crochet - No. 3.5.

Execution process:

Cast on 140 P. Take the smallest circular knitting needles for this.
Mark the joint with a marker, then connect the circle.
Knit the 1st section: 1 LP, 1 IP and so on until the end. Repeat the circle until the section is 12cm high.
Knit the 2nd section: make an increase (1 LP, plus 1 LP, 1 PI, plus 1 PI) so that you end up with 280 P. Then knit an elastic band: 2 LP, 2 PI and so on. Knit until the section is 15cm high.
Knit the 3rd section: make an increase (2 LP, plus 1 LP, 2 PI, plus 1 PI) so that you end up with 420 P. Then knit an elastic band: 3 LP, 3 PI and so on. Repeat the circle until the section is 19cm high.
Knit the 4th section: make an increase (3 LP, plus 1 LP, 3 PI, plus 1 PI) so that you end up with 560 P. Then knit an elastic band: 4 LP, 4 PI and so on. Repeat the circle until the section is 24 cm long.
Close the P with a hook.
At the top, knit an elastic band 3 cm high. Close P.

Warm knitted skirt for the winter: diagram with description, photo

If you already have some knitting skills, you can easily make a warm skirt for yourself. To make it, stock up on:

Knitting needles - No. 4.
Threads in 5 different shades: brown, beige, blue, yellow and white.

Execution process:

Take yellow threads. Cast on 200 P. Knit P with IP.
Take beige threads. Knit as indicated in the pattern. Repeat rapport 20 rubles. Knit it 4 R.
Take blue threads, knit 2 R with them. Then take white threads. Knit 2 R with them too. Take brown threads, knit 6 R with them. Then 2 R with beige threads, 2 R with blue threads, 2 R with white threads. Then knit 4 R with beige threads, 4 R with brown thread, 4 R with white thread. Then 2 R with blue threads, 4 R with beige threads, 2 R with yellow threads. Continue knitting, repeating the entire point.
When the height of your fabric is 39 cm, do not make H at 4 P. In subsequent repeats, reduce by 2 P. Knit 160 P in this way.
Knit 4 R and 5 R up to 54 cm.
Knit an elastic band. At the same time, alternate between IP and LP. Tie an elastic band 4 cm high.

Knitted skirt with zigzag pattern: description

A fairly simple skirt, which is made with a zigzag pattern. To make it, stock up on:

Thread – 2 skeins
Knitting needles No. 4
Knitting needles No. 5

Execution process:

Cast on 160 P for the front using needles number 4 (you will have to cast on the same amount for the back of the skirt).
Knit an elastic band 18 cm high in this way: 2 LP, 2 IP, 2 LP and so on.
Switch to needles number 5. Knit the fabric with a zigzag pattern as indicated in the pattern.
When your canvas is 46 cm, complete the 2nd P of the diagram.
Close P.
Sew the front and back.

Zigzag skirt

Knitted Eiffel Tower skirt: diagrams, description

A skirt made in the shape of an Eiffel Tower looks very interesting. To make it, stock up on the following materials:

Threads 280 m – 100 g
Knitting needles - No. 3.5

We give you the pattern for 4 P. But you will have to knit with 3 P.

Execution process:

Cast on the knitting needles 144 P. You will get a belt (6 IP, 6 LP and so on).
Connect the edges between each other: knit 2 stitches together, then add enough so that you end up with 156 stitches.
Then, while knitting, add another 12 stitches. You should have 12 stitches between each diamond.
Knit the skirt as indicated in the pattern.

Skirt "Eiffel Tower"

Knitted openwork skirt: diagrams, description

We offer you an easy-to-make skirt that you can wear in the warm season. It is knitted using an openwork pattern of thin threads. To make it, stock up on:

Threads – 300 g (for a skirt with a girth of up to 102 cm).
Knitting needles number 3.
Knitting needles No. 3.5.
Knitting needles number 4.

Execution process:

On the knitting needles No. dial 143 P. Then transfer the work to the knitting needles No. 3.5 and knit 3 R PT.
Next comes the pattern. Start knitting it from the 1st R. Knit like this: 2 P before rapport, 10 P of pattern 13 R. At the very end of P, knit 11 LP.
Knit the pattern as indicated in the pattern. You should get 16 R (rapport).
When your canvas is 24 cm high, decrease 1 P on both sides. Make sure that the pattern is preserved. Or you will have to shift the decrease in P by the desired number of P.
Make this decrease 9 p every 3.5 cm. You should end up with 123 p on your knitting needles.
Knit a skirt fabric with a height of 59 cm. Take knitting needles number 3. Knit an elastic band 3 cm high with them.
Close P. Knit the 2nd part of the skirt.

Knitted jacquard skirt: diagram

An attractive and very comfortable skirt made with jacquard patterns. To make our version, you need to stock up on:

Blue yarn – 250 g.
White yarn – 100 g.
Circular knitting needles - No. 2.
Circular knitting needles - No. 2.5.

Pattern for knitting the main fabric of a skirt with knitting needles

Knitting pattern for skirt inserts

Execution process:

Cast on 210 stitches on needles No. 2. Knit a belt 7 cm high using stockinette stitch. At the fold in the center of the waistband, knit a stitch.
Switch to knitting needles number 2.5. Add 22 P evenly (you should end up with 232 P).
Continue knitting LG and knit as indicated in the diagrams.
Before the 1st pattern, add 18 P.
Before the 2nd pattern, add another 16 P.
Before the 3rd pattern, add another 19 P.
Before the 4th pattern, add another 30 P.
After the 5th pattern, decrease 18 P.
After the 6th pattern, decrease 18 P.
Finish the skirt with the last pattern and close the skirt with an elastic band using size 2 needles.

How to knit a pleated skirt?

The pleated skirt is made from even folds in the form of an accordion. The advantage of this product is that it is very easy to knit. To make it you need to stock up on:

Knitting needles
Threads

Execution process:

Dial such a number of P so that it is a multiple of 10 plus 2 KP.
Tie the 1st LR like this: KP, 9 LP, 1 IP. Repeat this sequence until R ends. Finish R 1 CP.
Link the 2nd IR like this: CP, 5 LP, 1 PI, 9 LP, CP, 5 LP, 1 PI, 9 LP, 1 PI. Repeat the sequence of 9 LPs and 1 IP until the end of R. Finish R 4 LPs plus 1 CP.
Then repeat 1st R and 2nd R to the required height. When knitting, keep in mind that strips that consist of IP form the inner corner of the fold, and strips of LP form the outer corner.

Knitted pleated skirt

You can knit this skirt for your 4-year-old daughter. In order to knit it, stock up on:

Yarn – 150 g
Knitting needles - No. 4, length 80 cm

Execution process:

Cast on 140 P. Knit the elastic band in a circle: 7 rows of LP, 1 R IP, 7 R LP, 1 R IP. At the end, you will need to fold the resulting strip in half. At the top you will have P from IP.
Then knit 1 installation P for braids: 3 LP, 4 IP. Knit a pigtail on 3 P - * 1 circular P 2 P on an auxiliary needle for your work, 1 LP, P from an auxiliary needle, then 4 IP and so on until the P is finished. 2 KP, then all P according to the pattern*. Repeat P from one * to another *.
Knit this pattern to the required height. Then start knitting the bottom of the product.
To expand the fabric, start knitting in this way: 1 N, 3 LP, 1 N, 4 IP and so on until the R is over. Knit the next R according to the pattern. Knit the LP crossed so that the holes do not turn out too large. Next R: 1 N, 5 LP, 1 N, 4 IP - an increase occurs. Add this to the desired width of the bottom of the skirt.
Knit with this pattern to the required height of the fabric. Knit the last 4 R's with IP. Close the work of the individual entrepreneur.
Hem the elastic band. Insert a rubber band into it. If you wish, you can sew beads to each fold.

The size of this skirt is suitable for a waist up to 81 cm. To make it, stock up on the following accessories:

Red yarn - 8 skeins. 50 g (or 120 m).
Black yarn - 1 skein.
Circular knitting needles - No. 3.5 (1 m).
Circular knitting needles - No. 4 (1 m).
Short circular knitting needles - No. 3.5.
Short circular knitting needles - No. 4.
Flat rubber band.

Execution process:

Cast on 640 stitches with red yarn using long needles No. 3.5.
Knit in a circle (mark each circle) like this: knit with a garter pattern (1 circular R LP, 1 circular R IP). Knit like this: 4 circular P with red threads, 4 circular P with black thread, 4 circular P with red thread.
Take long knitting needles number 4. Knit 4 circular R's with red LP thread. Then start knitting as indicated in the instructions.

Knitted long skirt

The next skirt model will fit size 46. In order to knit it, stock up on:

Bur-colored acrylic threads – 300 g
Braid – 1.5 m
Knitting needles - No. 4.5
Crochet - No. 4.5

Execution process:

Fold the thread in half. Dial 201 P and knit as indicated in pattern No. 1.
Knit 65 cm, then change the pattern to the one indicated in pattern No. 2. Please note: You need to reduce the number P by 1 pc. As a result of this, 200 P should remain on your knitting needles.
When you knit a fabric 85 cm high, close the P according to the pattern.
Then assemble the individual parts of the skirt: take the pieces of the product, place them on your pattern, moisten them and dry them. Then sew the dried parts together, leaving a small 35 cm slit on the side. Crochet the bottom of the product and the slit, and pull the braid into the waistband.

Knitted mohair skirt

To make this skirt you need to stock up on:

Emerald yarn – 150 g
Straight knitting needles - No. 3.5
Circular knitting needles - No. 2
Crochet - No. 3

Execution process:

Tie 13 wedges as shown in the picture. It shows 3 wedges plus the start line of the 4th wedge. The arrows shown in the picture are where all the knitting is directed.
Take knitting needles number 3.5. Dial 102 P. Knit R LP. You will not take this P into account in further calculations.
1st wedge: *1 R with IR garter pattern shortened R (set aside at the end of IR 33*3 P, turn with H and knit back LR with shortened R, then LR equal to 66th R, knit 3 P). Knit the 67th R using 102 P again (knit repeated H followed by P together with the LP). In the next P, knit the first 15 P, set aside these P for the belt. Knit 87 P. When the P runs out, cast on an additional 15 P (you will end up with 102 P). One wedge ends with this P.
Tie subsequent wedges from *. In the 68th P of the next wedge, knit the first 15 Ps and set them aside for the belt. The other 87 P close the LP.
Sew the cast-on edge and closed edge. 15 P will appear on your left. Take circular knitting needles, transfer 15 P to them, which you set aside from each wedge. Add 1 P in the 1st R. Knit 196 P on them in a circle with an elastic band. When your elastic band is 8 cm high, close the pattern as in the diagram.
For the tie, use a hook to tie a chain with a double thread, using chain stitches 130 cm long. Step back 2 cm from the top of the product, pull the belt from the center, pass over 2 stitches and under 2 stitches.

Skirt knitted diagonally

A skirt made diagonally looks very unusual. To knit it, stock up on:

Yarn - 300 g (150 g of one color, and 150 g of another color)
Knitting needles - No. 3.5

Execution process:

Dial 155 P.
In every 2nd P, at the beginning of the P, add 1 P. When the P ends, subtract 1 P. You will end up with a rhombus.
Take one color of thread. 1 R: knit LP.
2 R: knit IP (CPs do not count).
Take a different color of thread. 1 R: knit LP.
2 R: knit IP. You will get a beautiful scar.
At the bottom of the product (instead of decreasing), take 2 LPs together, tilted to the left side (the edge will not curl up).
At the top of the product (instead of increasing) in the IR before the CP, make 1 N. Then knit the CP. Subsequently P (LR) change the threads. Knit the CP with new yarn, then knit the crossed H, and then all the LPs.

Skirt made of thick yarn knitted

Quite an interesting version of the skirt. To make it, stock up on:

Melange threads – 350 g.
Knitting needles - No. 9.
Auxiliary knitting needle.
Thick needle.

Execution process:

Knit the skirt as indicated in the description:

Knitted skirt with clasp pattern

From the “Lock” pattern you can knit any skirt of your choice, for example, a classic pencil skirt. But to complete the pattern itself, you will need to perform the following steps:

Dial the number of P that will be a multiple of 5 + 2 P for the symmetry of the pattern, + 2 KP.

1 R – knit *2 IP, 3 LP*, 2 IP.
2 R – 2 LP, *3 IP, 2 LP*.
3 R - *2 IP, 3 LP, throw the 3rd LP of your rapport to the left side through the 4th P and 5th P*, 2 LP.
4 R – 2 LP, *1 IP, 1 H, 1 IP, 2 LP*.
Then repeat the pattern in the 1st R.

Skirt with "Lock" pattern

A mini skirt with an unusual pattern will please any fashionista. If you like to wear short skirts, be sure to knit this model. For this you need to stock up on:

Circular knitting needles.
Yarn.

Execution process:

Dial 220 P.
Connect the work in a circle.
Knit an elastic band 3 cm high in this way: 1 LP, 1 IP, 1 LP, 1 IP and so on.
At the same time, add 20 P evenly throughout the elastic band. As a result, you should get 240 P.
Continue knitting with the pattern indicated in the diagram (the picture itself shows one repeat).
Close P.
Take an elastic band, preferably a wide one, and sew it to the product.

Knitted ribbon skirt

Ribbon threads are essentially different from ordinary yarn. They are similar to tape. From these threads you can knit a very interesting product, for example, a festive skirt. It is advisable to knit ordinary patterns with ribbon threads, as they are already beautiful. For example, let’s try to knit a skirt for a girl. For this you will have to stock up:

Ribbon threads – 1 skein.
Ordinary thread.
Circular knitting needles.

Execution process:

Cast on 100 P from ribbon threads, close the circle.
Tie without cutting the thread 4 R LP with regular threads.
In the 5th P, add ribbon threads (knit all the P threads, folding it in half).
Repeat the 1st point and 2nd point, adding P if necessary, until the product is the length you need.

Knitted skirt with peacock tail pattern

Let's knit together a skirt for a little fashionista 5 years old. To make this skirt you will need the Peacock Tail pattern and the Star pattern. Plus 1x1 elastic band and IP fabric.

Execution process:

Knit in the round, starting from the bottom. Knit the yoke and elastic band.
Dial 252 P.
1 R: knit IP.
2 R: 25 LP, 17 IP.
3 R: 1 N, 1 IP, 2 LP, so 8 r. Then link 17 IPs.
4 R and 5 R repeat the repeat of the product.
6 R: make a decrease from IP. Then make a decrease every 4th R.
Knit the yoke with the “Star” pattern.
Knit the braid like this: 1 LP, 1 IP.

Knitted assol skirt with description and diagram

In terms of execution, the skirt is not considered the lightest, but it deserves to be knitted for your daughter.

Let's take the average size: length is 57 cm, waist width is almost 84 cm.

To make it, stock up on:

Yarn 100 g - 8 skeins.
Circular knitting needles - No. 4.5.
Elastic band for the belt.

Execution process:

**Dial on 105 P. Knit LG 3.5 cm. Finish knitting IR.
In the subsequent LR, knit a wedge of 72 P. Then turn the work.
Leave the remaining P on the working knitting needle. Do not knit them until you have knitted the entire wedge.
2 R: close 4 P, knit LP to the end of the row (68 P).
4 R: close 4 P, knit IP to the end of the row (64 P).
5 R: knit IP.
Repeat the last 4 R's 2 more R's. Finish in LR (48 P).
Start knitting with IR. Continue knitting LG, at the same time close 4 P at the beginning of the next 12 IR (in the end you will close all P). Don't cut the thread.
From the face, lift along the edge of the product with closed P 72 P. Then knit 33 LP (105 P). You have tied a 1-in wedge.
Repeat from one * to the other * for another 11 rubles. Finish in LR. Then knit the next IR and close P.
From the face of the product, lift 165 P. Start with IR: knit an LG of almost 8 cm, finish in IR. Close P.
Now sew the edge you picked up and close together.
Fold the belt from the wrong side. Sew it on and insert the elastic.

Skirt year

Knitted skirt with elastic knitting

In order to knit a size 48 elastic skirt, you need to stock up on:

Yarn – 3 skeins.
Knitting needles - No. 4.5

Execution process:

Cast on 90 P. Knit 2 similar pieces for the front and back.
Use an elastic band for knitting: 5 LP, 5 IP, 5 LP, 5 IP and so on.
Tie the belt with the following elastic band: 2 LP, 2 IP, 2 LP, 2 IP and so on.
Sew the details.
All. The skirt is ready.

How to knit a flared skirt?

A warm skirt will become an indispensable thing for you in winter. So, stock up in advance:

Melange threads – 400 g
Knitting needles - No. 5
Knitting needles - No. 6

Execution process:

Both the front and back of the skirt are done the same way.

Cast on 122 sts on smaller needles. Knit a 1x1 elastic band.
Take knitting needles number 6. Tie like this: 1 CP, * 2 LP, 10 PI, 16 (braid), 10 PI, 2 LP. Repeat from * 2 r, KP.
At the same time, reduce P in every 8th R like this: 5 r, decrease by 6 P. Reduce in the 18th R like this: 3 r, decrease by 6 P (in every 6th strip with IG, knit 2 P together with IP, y There will be 74 P left of you).
When you knit 98 R from the very beginning of work, knit 2 R LP. In every 1st P, remove 22 P evenly. You should have 52 P left.
Knit another belt 7 cm high.

Knitted wrap skirt

A red wrap skirt is a great thing for the office, an evening walk, meeting with friends... If you want to knit such a fashionable skirt, stock up on:

Yarn – 350 g
Circular knitting needles - No. 3
Circular knitting needles - No. 3.5

Execution process:

Take knitting needles number 3.5. Cast on 4 P. Knit 1 LR and 1 IR.
1 R: (as a LR) from the 1st P, knit 1 RL and 1 RL crossed, then knit a RL, knit the last P like this: 1 RL plus 1 RL crossed (you added 2 R).
2 R: knit (as IR): LP.
3 R: knit like 1 R.
4 R: IP.
Repeat all 4 R's in height so that the length of the product is 46 cm.

When you reach the required length of the product, knit like this:

1 R: remove 1 P, then knit the LP, pull the removed P through the knitted P, knit the remaining P (not counting the last 2) LP, knit the last 2 P together with the LP.
2 R: knit LP.
3 R: repeat 1st R.
4 R: knit IP.

Repeat these 4 P's until you have 4 P's left on your knitting needles. Then close the P's.

Assemble the product. Continue the seam allowance you left for the scent. Knit it 12 cm.
For the belt, cast on needles No. 3 192 P and knit along the entire circle LG. When you knit 3 cm, knit 1 R from the IP (so you get a fold line) plus 3 cm LG. Then close the loops.
Sew the waistband inside.
Step back 15 cm from the waistband. Sew this area.
Process the bottom as desired.

Large size knitted skirt: diagram with description

A skirt in boho style will be a real find for women with curves. This style combines hippies, folklore, military style, a touch of gypsy clothing and ethnic motifs.

The simplest thing that can be crocheted and knitted is a skirt. And no matter how complicated it looks. To make a stylish skirt for any season, it is enough to know the basics of knitting patterns according to the proposed patterns and be able to calculate the number of loops.

Before you start knitting patterns, you need to learn how to read their patterns correctly and master a set of loops and their types: knit and purl.

Typically, the knitting pattern is a square divided into squares. Each cell is one loop, respectively, the number of cells horizontally and vertically is the number of loops and rows for repeat, i.e. for knitting a pattern using knit and purl stitches.

How to calculate stitches for a knitted skirt

make a life-size pattern for the product (for example, by tracing each detail of a finished item in your size);
knit 1 pattern repeat according to the chosen pattern with the threads you will start knitting the product with;
calculate the number of loops in 1 cm;
Compare your data with the product diagram or make your own calculations.

Please note that to knit a skirt, the fabric must be made thick enough, otherwise the skirt will be see-through and you will have to sew an additional lining.

How to knit a simple skirt

There is very little left until summer, so we chose a simple one, knitted from thin threads. Knitting requires less yarn than crocheting, so for such a skirt you will need no more than 350 g of cotton yarn.

How to knit a godet skirt with knitting needles

You can also simply crochet a flared skirt. Below we have given you a slightly different pattern, according to which you can knit a circle skirt both with crochet and knitting, in any chosen pattern.

You can create artificial or real pleats, which will give a flared skirt a more playful and playful look.

How to knit a skirt on circular knitting needles

Using circular knitting needles, you can knit a skirt in the round, then it will not have seams on the sides. These knitting needles are especially good for knitting flared, wide skirts and dresses.

A small but very useful tip:

How to knit a skirt from ribbon yarn with knitting needles

Ribbon yarn is more reminiscent not of yarn or thread, but of braid or, more precisely, regular ribbon. Such threads make very unique products, especially dresses or skirts. It is better to knit regular patterns with ribbon yarn, without any quirks; it itself is very unusual and beautiful. There is a small nuance when knitting with such threads: their ends unravel very easily, so special attention must be paid to securing the tails.

Ribbon yarn varies in thickness from the thinnest, barely noticeable ribbon, to a wide one, from which very beautiful flounces and ruffles are obtained. This yarn is most often used to knit children's skirts and dresses, scarves and items for interior decoration: tablecloths, lampshades.

We chose a simple baby skirt with ruffles, knitted in a solid, wide ribbon yarn. Despite the simple, uncomplicated knitting, a skirt made from such yarn turns out to be very interesting.

For such a skirt you will need one skein of ribbon yarn and the remains of ordinary cotton threads that match the color. It is also better to knit such a skirt on circular knitting needles, otherwise the side seams will be very noticeable.

Using ribbon yarn, cast on 100 stitches on circular needles and close them into a circle.
Without cutting the ribbon yarn, knit 4 rows in stockinette stitch.
On the fifth row, add ribbon yarn (doubling each stitch).
Repeat steps 1 and 2, adding loops as necessary, according to the size of the skirt, until you reach the desired length.

How to knit elastic for a skirt

When mastering the art of knitting, you definitely need to learn how to knit an elastic band. After all, it is required not only for skirts and trousers, but also for knitting almost all products - mittens, hats, scarves, cuffs and necklines, lamp shades... You can’t list everything. In addition, knitting with even the simplest English rib is often used even in the manufacture of an independent, full-fledged item and is very popular among both experienced knitters and novice needlewomen.

Despite all its ease of execution and versatility, it should be noted that such knitting has both pros and cons. The advantages, of course, include its double-sidedness: the product looks equally good from the inside and from the front side. The thing turns out to be elastic, because it’s not for nothing that it’s an “elastic” after all. The downside is that it cannot be ironed and should only be dried flat to avoid stretching; and no matter how hard you try and care for the product, over time it will still lose its shape, so if you knit a scarf and plan to wear it for more than one season, then initially make it shorter than necessary. In addition, you will need at least twice as much yarn for knitting with English rib than for any other pattern.

How to knit a belt for a skirt

We have already told you how to knit a beautiful lace one. But with the help of knitting, you can knit a thicker belt, for example for a warm skirt, from thick threads.

You can also knit a thick cord with knitting needles, if suddenly you haven’t succeeded yet. But even if you master it perfectly, then the extra equipment will definitely not hurt you.

How to knit a skirt: video

Another very interesting skirt model, knitted on knitting needles, which will suit both adult girls and little fashionistas.

‘]

Original things have long been the key to the unique style of every woman who loves herself. But sometimes you have to pay for the uniqueness of your favorite thing, and a considerable amount. This is especially true for knitted skirts. It is they, the chic handmade creations hanging in the windows of expensive boutiques, that fascinate almost all representatives of the fair sex.

But unfortunately, the magical effect ends exactly when the happy owner of a new thing comes out of the state of hypnosis and discovers that she bought something wrong. And the reason here lies not in poor quality or incorrect cut. Everything is quite banal. Knitted skirts are such an individual thing that each of its styles must correspond not only to the style, but also to the image of the owner. In addition, this wardrobe item is not suitable for everyone. Let's take a closer look at the advantages and disadvantages of knitted skirts.

Knitted skirts

The main disadvantage of a knitted skirt is that with its help it is impossible to hide even the smallest flaws in the figure. But she will perfectly highlight all the shortcomings. But if the immense desire and love for skirts does not leave your wardrobe, we advise you to wear it with a tunic or an elongated blouse, and complement it with a jacket or a loose-fitting jacket.

Knitted skirts will be an advantage for fashionistas. This season, stylists like to recommend them to many owners of an ideal figure. With its help, it is simply impossible not to stand out or go unnoticed. As for combining with other elements of clothing, an ensemble of knitted items looks just perfect, and it’s not short on practicality.

Also, these skirts are often worn over skinny jeans in combination with a jacket. This youthful combination gives the style a certain lightness and uniqueness. For elegant ladies, blouses or shirts in soft tones, complemented with exquisite belts, will be just a godsend. Jackets combined with a knitted skirt should be given special attention; in any color and style they will always and everywhere be a harmonious set. And when paired with leather or fur clothes, knitted skirts will be a win-win option.

Knitted skirt

There will be no problems with accessories either. The examples above would be:

any beads;
jewelry with pearls;
brooches;
leather and decorative belts;
ethnic and classic bracelets;
small bags.

As mentioned above, a knitted skirt is a practical and at the same time elegant part of a modern women's wardrobe. Knitting such a skirt with your own hands is not particularly difficult if you have certain skills. But besides knowing the knitting technique, there are several more nuances. Let's look at them.

Correct selection of yarn. For a knitted skirt, the best material is acrylic. The fact is that it is acrylic threads that are least susceptible to deformation during the care process.
Creating a pattern and taking the necessary measurements (waist circumference, hip circumference). Here you cannot do without a pattern; with its help, choosing the right size will not be difficult.
During the work process, it is necessary to take into account the density of the fabric. This will help you avoid mistakes when calculating decreases and additions. You need to decide on the type of knitting.
There is knitting with seams and seamless. When knitting seamlessly, use circular knitting needles and knit in the round. And when knitting with seams, the front and back parts are knitted separately.
If the style of the skirt is straight, then knitting begins from the bottom.

White knitted straight skirt

Next, the process of knitting a straight style will be considered using an example. A model was taken as a sample from the fall/winter 2015 collection of the famous fashion house Dior (the first publication was made by Vogue magazine). Of course, not every woman can afford to buy such an exquisite skirt from a famous designer. But if you choose similar material and tools, you can knit a chic skirt that will be in no way inferior to the original.

Knitted skirt from Dior

The description shows four sizes: XS–S–M-L. Translated by measurements, in finished form, it looks something like this: waist: 68 cm – 74 cm – 84.5 cm – 94.5 cm; hips: 83 cm – 89.5 cm – 99.5 cm – 112 cm; product height: 58 cm. The following materials will be useful for work: straight knitting needles with a diameter of 4.5 (5) mm; CollageYarnfantasticc threads (color: dark gray “A”) 250 grams; CollageYarnfantasticc threads (color: lavender “B”) 200 grams; knitted pin or additional knitting needle; an elastic band one meter long and thirty mm wide.

Additional types of loops

Knitted skirt in light lilac color

There are also additional types of loops in the work, in which it is necessary to take into account color transitions. It is important to remember that when changing colors, you need to weave the threads only on the wrong side of the product. This manipulation will help avoid the appearance of holes on the front side. It is also better to use different skeins. 8 - st R C - remove four loops on an additional knitting needle, move the knitting needle behind the working fabric, four knit stitches, four loops from an additional knitting needle. 8 - sl L C - - remove four loops on an additional knitting needle, move the knitting needle in front of the working fabric, four knit stitches, four loops from an additional knitting needle.

First you need to knit the back piece. Cast on straight needles with 19 – 21 – 24 – 26 stitches, ColageYarn fantastic threads (color: dark gray “A”). Continue casting on with ColageYarnfantastic threads (color: lavender “B”) 200 grams, 33 – 35 – 37 – 41 stitches. And finish from the second skein of CollageYarnfantasticc thread (color: dark gray “A”) 250 grams, 18 - 20 - 23 - 25 loops. In the first row, all colored segments are knitted, alternating purl loops with knit stitches (1*1). Next, continue knitting 1*1 to a height of 2.5 cm. Once this height is reached, begin knitting the “two-color braid” pattern.

Braid pattern

Knitted skirt with braids

In the first row, knit ColageYarnfantasticc color: dark gray “A” with knit stitches 13 – 15 – 18 – 20 stitches. The next 12 stitches are knitted as “8 - st R C”. After CollageYarnfantasticc color: lavender “B” knit 21 – 23 – 25 – 29 stitches with knit stitches. Then knit 12 stitches as “8 - sl L C”. We finish the row with ColageYarnfantasticc threads (color: dark gray “A”) 250 grams, knit stitches. In the second row we knit with CollageYarnfantasticc threads (color: dark gray “A”) 13 – 15 – 18 – 20 purl stitches. After this, 12 stitches as “8 - st L C”. After this, knit with Colage Yarn fantastic threads (color: lavender “B”) 21 – 23 – 25 – 28 purl stitches. Then 12 stitches “8 - sl R C”, and purl stitches to the end of the row.

Continue knitting as described until the 20th row. Repeat the pattern until the length of the product reaches 14 cm and complete the work with a purl row. Next, they begin to form the bevels of the knitted skirt. Continue knitting, increasing one loop on each side in the next row. After that, we add 4 times in every 16th row. The total should be 79 – 85 – 93 – 105 loops. Continue knitting to a length of 45 cm from the beginning of knitting. Finish knitting in a purl row.

The upper part of the skirt is knitted like this. Decrease this loop on each side in the next row. After this, do the same decreases in the 4th row 5 more times. At the end there should be 67 - 73 - 81 - 89 stitches left on the knitting needles.

Continue knitting a report of 20 rows 7 more times. The length of the product should be 58 cm.

The second part of the product is symmetrically tied.

The knitted skirt is almost ready, all that remains is to knit the belt. Using Collage Yarn fantastic thread (color: dark gray “A”), knit 3 centimeters in garter stitch. This is the final stage, all that remains is to assemble the knitted skirt.

Assembly

You need to pin all the details of the knitted skirt to the pattern. To give the parts the desired size, slightly moisten, then dry.
Now sew the side seams.
Place the belt on the wrong side and sew it on, not forgetting to leave a hole for inserting an elastic band.
Insert elastic, trim off excess and sew.

That's all, the knitted skirt is ready. All that remains is to wish that this exquisite product was only the first creation.