How to tie a muzzle of a dog on knitted slippers. Children's knitted dog slippers with a description. Scheme for knitting the upper part of the sneaker

Crochet slippers master class.

For size - 36-38.

Sole length ready slippers- 26 cm.

Yarn consumption- 170g.

Materials:

Yarn Pekhorka Autumn (25% wool, 75 PAN bulk. 200g/150m)
hook No. 6.5;
black yarn Podmoskovnaya for nose and embroidery;
black and white felt;
two black buttons with a diameter of 18 mm;
white threads;
needle;
sintepuh in the nose;
felt sole.

The yarn is very thick, so I would advise you to take even more hook than mine. At the time of knitting, my largest was only 6.5.

Description of knitting slippers

The schemes are all done by hand, as it was invented, knitted, and unraveled on the go :)

Sole

We knit the sole according to the scheme below, if you need a larger size, then increase the number of air loops in the typesetting chain. I have 12 air.p.
As a result, the slippers turned out to be wide, but this is also because I stretched them along the width of the sole. You can also fit in with a woolen sock :)

Sole knitting pattern:

+ - these are single crochet; with a stick at the top- this is a half. with one crochet.
3 rows knit according to the scheme.
4th row: tie according to the pattern. Set aside, do not cut the thread.

Unstretched length approx 24 cm.

Slipper top

The upper part consists of 15 rows, knit according to the scheme below.

Scheme for knitting the upper part of the sneaker:

Attention! 5, 6 rows are not indicated in the diagram - we knit 14 tbsp.
and 9, 10 rows - we knit 12 tbsp.

We impose the upper part on the sole, we determine the beginning of stitching.
We connect by knitting 1 row of Art. b/n. On the sole diagram, this is the 5th row. Increases in this row are indicated on the side - it turns out 3 columns on the heel and toe.
6th p.: step by step.

Ready! break the threads, hide. Also, if you are "worried" about the holes in the middle of the sole, they can be pulled together with a thinner thread using a needle.

Ears (4 pcs.)

8 rows according to the scheme, 9th p. - step step.
I then sewed on the threads.

Eyes

Black ovals about 4-5 cm. Cut out 4 black and 4 white ovals.
She put white on black with a shift to the middle, sewed on buttons. Then she sewed a seam "forward needle" white circles.

Then along the black oval to the slippers.
She sewed on the ears, bending them in half.

Nose

Hook number 3. 3 vp into the ring.
1 p.: 10 st. b / n .; 2 p.: 20 st. b / n; 3 p.: 30 st. b / n; 4, 5 p.: 30 st b / n.
Fold to the bottom with a corner, fill a little with sintepuh and sew on the muzzle.
Embroider the mouth.
All muzzle is ready.

Funny house slippers are knitted, crocheted details are used for decoration. In such home shoes, your legs will be warm both in autumn and in winter.

Size 35-36
For knitting you will need: yarn (50% wool, 50% acrylic, 300 m / 100 g) - 60 g dark brown, Carolina yarn (100% acrylic, 438 m / 100 g) - black remnants, yarn "Grass" (100% acrylic) - the remains of light brown and dark brown colors, knitting needles No. 2.5, hook No. 2.75, synthetic winterizer.
Garter stitch: knit. and out. rows - only persons. loops.
Rib 1x1: Knit 1 alternately. n. and 1 out. P.

Gauge: 18 sts x 30 rows in garter st = 10 x 10 cm.
How to knit slippers with knitting needles. Description of work and knitting patterns.

Start knitting from the sole. On the knitting needles with a dark brown thread in 2 additions, dial 26 p. And knit with a garter stitch, adding on both sides in each 2nd row 6 times x 1 p. \u003d 38 p. Then knit 4 rows without additions, then subtract from both sides in each 2nd row 6 times x 1 p. \u003d 26 p. Next, knit the upper part with knitting needles. To do this, type an additional 7 sts on the knitting needle (continuation of the sole), turn the work. Knit the resulting 33 sts, at the end of the row, add another 1 st. Next, from this edge, add 5 more times x 1 st in each 2nd row (as on the soles of slippers). Knit 12 rows straight. Then bind off 20 sts from the side of the heel, knit the remaining sts with knitting needles in garter stitch for 6 more rows straight. Then start decreasing from the side of the toe in every 2nd row 6 times x 1 st. After that, from the side of the heel, dial 20 sts again and knit another 12 rows with an elastic band 1x1. Close the loops. Run a seam. Ears: crochet slippers with dark brown Grass yarn in 5 rows of st. b/n. In the next row, after knitting the side part and reaching the fold line, add 1 thread of brown color and knit the eyelet with b / n columns according to the scheme. After knitting 10 rows with half-columns, return to the front of the product, knit 3 tbsp. b / n and perform the second eye in the same way. Then tie the ears and side part 1 next to st. b / n thread "Grass" light brown.

Muzzle: with the thread "Carolina" in 2 additions, dial 16 p., knit with knitting needles with a garter stitch 2 rows straight. Then increase on both sides in each 2nd row 2 times x 1 p. = 20 p. Knit 18 rows without additions, then decrease on both sides in each 2nd row 4 times x 1 p. close loops. Tie the item around the entire perimeter 1 next to Art. b/n. Then knit 1 more row of st. b / n, skipping every 2nd st. of the previous row so that the muzzle is pulled together.

Spout: with a black thread in 2 additions, dial a chain of 3 air. p., close in a ring. Knit 6 tbsp. b / n in the ring. Next, knit in a circle with b / n columns, evenly adding 6 tbsp. in every row. When you get a circle with a diameter of 3 cm, pull the part along the edges, stuffing it with padding polyester.

Assembling the details of knitted slippers: sew the muzzle with a narrow part between the ears, slightly filling it with padding polyester. Also fill the wide part with padding polyester, sew. Sew the nose onto the muzzle. Sew or glue eyes.
Source
Based on the materials of the magazine "Knitting is fashionable and simple. We knit for children" 2013
Published by Galina Pykhtina on the Mirtesen website Skilful Hands.

It's no secret that small decorative dogs need shoes, not only for a walk, but also at home. At home, of course, it is not as cold as on the street, but in slippers the dog will be much warmer and more comfortable. A small decorative dog in such slippers will feel just great and cozy. How to knit slippers for dogs will be discussed further.

You will need:

thirty grams of colored and ten grams of black yarn (two hundred and fifty meters / one hundred grams) for a sole size of four by five centimeters,

four knitting needles (No. 2.5), a sewing needle;

1 m satin ribbon, rubber thread.

How to knit slippers for dogs:

Let's knit a sample of slippers for dogs. In order to determine the density of knitting - we collect twenty-four loops on the knitting needles and knit with an elastic band one by one thirty rows, the fabric should come out ten by ten centimeters in size. We collect eighteen loops with a double thread and knit thirty-two rows, the canvas is ten by ten centimeters.

We measure the length, as well as the width of the sole (here - five centimeters or sixteen rows, four centimeters or seven loops),

the height of the toe of the slippers (one and a half centimeters or four rows),

the height of the slippers (four centimeters or twelve rows),

along the upper edge of the slippers - the circumference of the foot (twelve centimeters or thirty-six loops),

the distance from the toe to the bootleg (two centimeters or six rows).

We start knitting a slipper for dogs from the sole, it is done in garter stitch. We collect seven loops in two threads with black yarn and perform two rows, in the third - we add one loop on each side, then continue the fabric to the sixteenth row. In the sixteenth row from each edge we knit two loops together and in the next - close the loops.

You need to tie the top of the slippers. The first 2 rows are knitted with garter stitch. We collect a slipper along the edge of the sole with a colored thread on the first and third knitting needles, six loops each (heel and toe), eight loops each - on the second and fourth (side parts). In the second row we knit the heel and toe of the slipper, add three loops each, add four loops to the side parts.

Next, you need to knit with an elastic band one by one four rows (sock height). Then we carry out the front part of slippers for dogs. On the needle where the sock loops are located, we knit six rows of garter stitch (the distance from the sock to the top). On the “toe” knitting needle, we knit each last loop together with the first loop from the knitting needle of the side part (the first row is front, the second row is wrong side) and leave it on the “toe” knitting needle, then we turn the knitting.

We continue to knit the bootleg of the slipper on four knitting needles (on each - nine loops after the sock is completed) with an elastic band one by one for another eight rows, and close the loops. In order for the slippers not to fall off, we quilt the bootleg with rubber thread. We cut the satin ribbon in half and sew it on the middle at the back of the bootleg.

Good afternoon friends!

Olga Andreeva seems to have become interested in knitting slippers and sent her second wonderful work - funny knitted children's slippers in the form of dogs. Well, they are so adorable! Description of knitting is also there.

Hello, readers of the blog "Comfort and warmth of my home"!

I already wrote about myself in a previous article. Today I would like to present one more work for the competition. These are knitted children's slippers.

Recently my nephew arrived with his little son Levushka. He is 1.5 years old. My sister, Lyova's grandmother, just met her grandson, because they live in Moscow.

I wanted to knit something for the baby. From the remnants of melange yarn, which I knitted for the slippers-socks contest, I knitted regular socks. And then I also decided to knit slippers, funny, in the form of dogs. Now the baby runs around the room in them.

Slipper materials

Slippers are knitted with blue thread of two types: wool with acrylic and grass.

I knitted with wool in one thread, and with grass - in 2, because these threads were very thin.

I used 2.5 mm circular needles and stocking needles for knitting the spout.

Knitting pattern: garter and stocking stitch.

For decoration, we bought ready-made eyes, and the nose of the dog is embroidered with black thread.

Slippers are sewn on the back.

Knitting children's slippers with knitting needles in the form of dogs

We start knitting children's slippers with knitting needles from above. We make the necessary measurements, calculate the number of loops according to the sample.

Top

I cast on 44 loops on circular needles with blue wool thread and knitted 3 rows in garter stitch.

Then she changed the thread to grass and knitted it 8 rows with the same pattern.

spout

We turn to knitting the nose of the slipper. We select 12 central loops on the spout. On the sides, 16 loops are obtained.

We knit the first 16 loops, then we continue to knit only the central 12 loops with stocking needles, and leave the side 16 on one side and the other on the ring knitting needles.

We knit the nose of the slipper in stocking knit of the desired length, up to the little finger. I got 22 rows.

Then we decrease the loops. We knit at the beginning and end of the row, two together with the front. In the purl row, we do not decrease, we just knit along the pattern. So we cut 3 times until 6 loops remain on the stocking needle. Cut the thread, then tie it to the main thread.

Sides

We collect from the outer side loops from the nose of the slipper 14 loops on both sides. And starting from the place where we stopped when we started knitting the spout, we continue to knit on circular needles in a circle in garter stitch. The threads that we cut when knitting the spout are tied to a blue thread.

We get 66 loops on the knitting needles (6-nose, 14 loops on both sides, which we scored, and 16 loops that remained on the ring knitting needles).

We knit with a garter stitch with a blue woolen thread for 10 rows. Then 4 rows - with grass and 2 more rows - again with blue woolen thread.

Sole

We turn to knitting the sole of the slipper. There are 66 loops on the needles. We leave 8 medium ones on the sole.

We knit 36 loops with front loops, then 2 together with the front.

We unfold knitting. Remove 1 loop, knit 6 facial, then purl 2 together, unfold the knitting again.

So we knit the middle loops of the sole with a garter stitch, knitting 2 together with the front in the front row and 2 together with the wrong side at the end of the wrong row. Thus, we cut the side loops until there are 4 loops left on the sides on both sides.

The length of the sole is about 15 cm. I made them a little bigger, because the child's foot grows very quickly.

Heel

Tied up the sole. We have 8 loops on the central needle, 4 on the side needles. We start knitting the heel. We remove the first loop from the central part, knit facial.

Two loops of 8 remain on the central needle, we knit them and the first loop from the side knitting needle together with the front one.

We unfold knitting. We remove the first loop, we knit it with facial ones, again 2 loops remain on the central knitting needle, we knit them and the first one with the side on the wrong side together on the wrong side.

Again, repeat-unfold and knit facial, knitting at the end of the front side 3 together. front, in the wrong side - 3 together wrong side.

So knit until there is only 1 loop left on the knitting needle.

We tighten the thread, leave it longer and sew the back of the slipper with a needle.

Slippers tied. Now let's decorate them.

Decoration of children's knitted slippers

First we knit the ears for the dog. Ours are double. The lower part is knitted with a blue woolen thread, the upper one with a grass thread.

Cast on 5 stitches per ear, knit 14 rows in garter stitch. Then on both sides we knit 2 loops together with the front. 3 loops remain on the needles, close them.

We tied 2 ears with woolen thread and 2 grass for each slipper. We sew pairs of ears together and sew on the sides of the slippers.

In front we embroider the nose of our dog with black thread. This was done by my daughter Ksyusha, she helped a little. Attach the eyes to the hot glue.

SLIPPERS-DOGS. Size of knitted slippers: 35-36 For knitting you will need: yarn (50% wool, 50% acrylic, 300 m / 100 g) - 60 g dark brown, Carolina yarn (100% acrylic, 438 m / 100 g ) - the remains of black color, grass yarn (100% acrylic) - the remains of light brown and dark brown colors, knitting needles No. 2.5, hook No. 2.75, synthetic winterizer. Garter stitch: knit. and out. rows - only persons. loops. Rib 1x1: Knit 1 alternately. n. and 1 out. p. Density of knitting: 18 p. x 30 rows of garter stitch = 10 x 10 cm. How to knit slippers with knitting needles. Start knitting from the sole. On the knitting needles with a dark brown thread in 2 additions, dial 26 p. And knit with a garter stitch, adding on both sides in each 2nd row 6 times x 1 p. \u003d 38 p. Then knit 4 rows without additions, then subtract from both sides in each 2nd row 6 times x 1 p. \u003d 26 p. Next, knit the upper part with knitting needles. To do this, type an additional 7 sts on the knitting needle (continuation of the sole), turn the work. Knit the resulting 33 sts, at the end of the row, add another 1 st. Next, from this edge, add 5 more times x 1 st in each 2nd row (as on the soles of slippers). Knit 12 rows straight. Then bind off 20 sts from the side of the heel, knit the remaining sts with knitting needles in garter stitch for 6 more rows straight. Then start decreasing from the side of the toe in every 2nd row 6 times x 1 st. After that, from the side of the heel, dial 20 sts again and knit another 12 rows with an elastic band 1x1. Close the loops. Run a seam. Ears: crochet slippers with dark brown Grass yarn in 5 rows of st. b/n. In the next row, after knitting the side part and reaching the fold line, add 1 thread of brown color and knit the eyelet with b / n columns according to the scheme. After knitting 10 rows with half-columns, return to the front of the product, knit 3 tbsp. b / n and perform the second eye in the same way. Then tie the ears and side part 1 next to st. b / n thread "Grass" light brown. Muzzle: with the thread "Carolina" in 2 additions, dial 16 p., knit with knitting needles with a garter stitch 2 rows straight. Then increase on both sides in each 2nd row 2 times x 1 p. = 20 p. Knit 18 rows without additions, then decrease on both sides in each 2nd row 4 times x 1 p. close loops. Tie the item around the entire perimeter 1 next to Art. b/n. Then knit 1 more row of st. b / n, skipping every 2nd st. of the previous row so that the muzzle is pulled together. Spout: with a black thread in 2 additions, dial a chain of 3 air. p., close in a ring. Knit 6 tbsp. b / n in the ring. Next, knit in a circle with b / n columns, evenly adding 6 tbsp. in every row. When you get a circle with a diameter of 3 cm, pull the part along the edges, stuffing it with padding polyester. Assembling the details of knitted slippers: sew the muzzle with a narrow part between the ears, slightly filling it with padding polyester. Also fill the wide part with padding polyester, sew. Sew the nose onto the muzzle. Sew or glue eyes.