Crochet knitted hats with knitting patterns, photos and videos. Crochet hat with an interesting pattern Description of knitting pattern

Photo from internet, no diagram.
Maybe I'm wrong, but the pattern in the photo looks like one pattern from my old notes.

So I will try to describe it.

If I'm wrong, if someone has a description, please write in the comments. And I'll add it here.

And now, as I see the pattern.
The beginning is the center of the bottom. A ring of 4-6 air. loops

1 circle-2p.under * 1 air, 1 st with nak in the ring * 1 air, connect. half-loop. Total with lifting loops 12-14 pillar.

2 circle-under the left air loop of the lower circle 1 half-st., then we knit the first petal here: 2 lifting loops, 1 air, 1 st with nak, 1 air and 1 tbsp. with nak. Then 2 air and half-column under the next. air the loop of the lower circle. But not to the left, but to the right of the first petal. For convenience, we slightly bend the first petal towards ourselves. We knit all the petals in this way. -and the next petal to the right of the previous one

Circle 3 - That's it. circles, the petals are located between the petals of the lower circles. We knit in a spiral, without closing the circles. In the 3rd circle, the petals are similar to the first circle, but by 1 air. and 1 solbik more. 2 lifting loops, 1 air, 1 tbsp. with nak, 1 air, 1 st with nak, 1 air and 1 st with nak.
then 2 air. and the petal to the right of the knitted

4cr.-Similarly, but again in the petals for 1 air and 1 tbsp. more.

And after each petal we knit not 2, but 3 air. loops.

So we knit, expanding the petals, and the number of air. between the petals we increase by 1 alternately after 1-2 circles. So until there are 16 tbsp in the petals, and 7-8 air between the petals. In order not to make a lot of increases in the petals, you can expand by changing the hook to thicker 2-3 times

If it takes, then its diameter should be 25-30 cm. Then we reduce the number of sts in the petals and in. sang many of them until they got holes around the head
The headband can be knitted on the hat itself or separately, then sewn on

The scheme for the rim

If we knit a hat, then we expand to a diameter of 16-18 cm, then, without expanding, we knit exactly the height of the hat

Below I showed the process of knitting the petals

First petal: under air. loop: half, 2 loops under., 1 air, 1 tbsp. with nak, 1 air, 1 tbsp with nak

After the petal -2 air

Bending the petal towards you, to the right of it under the air. we knit a loop. petal

Again 2 air. and trace the petal to the right of the knitted one. Etc.

The first circle of petals is ready

A knitted hat has long been a fashion accessory. A perky pom-pom or other decorative elements make it not only functional, but also a very beautiful piece of clothing. Cool hats cheer up and fit perfectly into any color scheme. They fit both a leather jacket and an elegant coat, you just need to master the crochet hat and learn a few simple patterns.

How to crochet hats

Crochet baby hats for boys and girls

You have probably seen children walking around in bright funny hats. Funny ears and faces of animals can be crocheted. First you need to take measurements, as shown in the diagram.

Basic knitting pattern for a baby hat

You will need:

• 80-100 grams of acrylic yarn (30 g pink and 60 g gray);

• some white and black yarn for decoration;
• hook number 4.

Operating procedure:

• start knitting with gray (pink) threads, starting from the crown;
• form a ring and tie it with a half-column to form a circle;
• continue to work and form the bottom of the cap in this way;
• when the bottom is ready, continue knitting with gray threads, but no longer add loops to form a circle;

• knit half of the cap and switch to pink (gray) threads;
• continue to work to full size and fasten the thread from the wrong side;
• mark a place for long ears, fasten the pink thread and knit with a simple half-column 4-5 cm;
• continue knitting the fabric until the length of the ear is sufficient (the order of knitting according to the scheme can be changed if you want more length of the ears);
• tie a symmetrical ear on the other side;
• follow the scheme of the upper round ears and the nose of the mouse;
• sew all the details to the hat.

Funny hares or teddy bears will decorate a hat for the little ones.

You can crochet other cute and practical things by mastering "crocheting for children".

Crocheted warm hats for women with patterns

Classic berets never go out of style. They are refined and elegant and are loved by women of all ages.

For a beret you will need:

• mohair with a small inclusion of synthetic fibers - 90 g;
• hook number 4.

The order of work according to the scheme:

• knit a chain of 8 loops and close it in a circle;
• start circular knitting with a regular column so that you get a round beret bottom;
• keep adding loops until you reach the desired diameter;
• knit several rows without adding loops - this is how you arrange the transition and the desired crease line in the beret;
• continue knitting with decreasing loops in the same pattern until you reach the desired head diameter;
• knit a circle loop into a loop, but wind the hook not into the front, but into the wrong side of the loop - this will be the transition to the elastic band that holds the beret on the head;
• knit the required number of rows loop in loop until the width of the rim is 3-4 cm;
• finish knitting by fastening the thread and pull the working thread inside the beret.

Look at other schemes for warm berets.

Crocheted slippers will help you warm up not only on the street, but also at home.

Winter women's hat, crocheted with lush columns

A voluminous hat is appropriate on cold days. Cozy and elegant hats knitted with a fluffy column will suit any style of winter clothing. They keep their shape perfectly and are a stylish accessory that you can make yourself.

Yarn for this style should keep the volume well, not wrinkle and not lose the pile. Otherwise, after a few days of wearing, the product will lose its appearance.

You will need:

• yarn - 150-250 g (depending on whether you will make the pompom yourself);
• hook number 4.

To get started, consider the nuances of the work:

• the hat is knitted from the bottom up;
• the multiplicity of loops for the pattern should be equal to 5;
• work is carried out not only in a circle, but in different directions: when the circle is completely passed in every second row, make a connecting column and continue the work of the third row in the opposite direction.

Operating procedure:

Many people think that voluminous braids can only be knitted on knitting needles. But the craftswomen prove the opposite and offer many voluminous crochet patterns.

To create three-dimensional patterns, the hook itself is very important. The size should be chosen optimally and in accordance with the thickness of the yarn. Then the patterns will be uniform throughout the thickness, but without gaps. The thickness of the hook should be uniform along the entire length, since when making a pattern, there can be 5-8 loops on the hook at the same time.

The patterns themselves are not that complicated.. It is enough to master with the basic elements and learn the necessary notation on the diagram.

Look at a few patterns made in bulk knit.

But finished products that can be created even from multi-colored yarn remnants.

Such a three-dimensional pattern can be used to knit even the most popular stocking hat or a three-dimensional beret today.

A crochet beanie hat can please you after a few days of work according to a given pattern.

Sometimes even the most beloved warm hat is so annoying that you want to decorate it in any way possible. And one of the fastest and most effective solutions is to crochet flowers and attach them to a hat.

There is another benefit to this method as well. Let's say you're learning "crochet patterns" and you're just practicing to get your hands full. So, the result of training can be visible results in the form of flowers. Or, for example, you decided to knit a beautiful snood, but there are no longer enough threads for a hat. A few flowers on the hat will decorate and unite the set together.

Individual flowers can be made according to different schemes, and then they can be arranged into compositions.

Hats for beloved men are so severe that they fit, of course, without openwork patterns and the slightest hint of ornament. Simple patterns and clear lines are only used to knit a simple hat for warmth. Look at some simple patterns with which you can knit warm hats for your men.

Using basic patterns and interesting color combinations, you can knit hats for even the most brutal men.

Video with master class lessons

• The author of the video tells what simple crochet techniques make up a women's knitted beanie hat. A detailed pattern and alternation of columns and chains will even help to create an elastic band along the edge of the cap, which is very difficult to do with a hook.

• Lush columns are the basis for fashionable women's hats. A video with a crochet lesson is useful for women who prefer hand-made hats to all purchased hats.

• The voluminous hat looks like it is knitted from fashionable and very expensive today alpaca or merino yarn. But no, only stitches and crochets, combined with skill, will help you knit a beautiful two-tone hat for a girl.

• A children's hat should not only be warm and beautiful, but also cover the child's ears well. A detailed master class on knitting a perky hat for a girl with a description of the decor elements and an analysis of the pattern. And from the leftover yarn, you can learn to crochet toys for your kids.

Knitting hats crochet, tell the general principles. With the help of this material, you can knit a hat of any shape yourself. The easiest way to start crocheting hats is from the top of your head. To determine your hat size, measure the circumference of your head. To do this, run the measuring tape horizontally across the forehead above the eyebrows and the back of the head. Pull the tape tight. We start knitting a hat from the crown. First we knit a circle.

Ways to knit a flat circle:

1. A circle of single crochets (RLS). If the circle is knitted with RLS, then knitting begins with 3 VPs. Then 6 sc are knitted into the last loop from the hook. Next, knitting goes in a circle in a spiral with the addition of 6 RLS in each row. Scheme 1.

2. Circle strong posts. How to knit strong posts, see the heading "". Knitting begins with 4 VPs, which are closed in a circle with a half-column. They make 2 VPs for lifting and knit, attaching another 7 strong columns inside the ring from the VP - together with the lifting loops, 8 strong columns will be obtained. They close the row with a half-column and again make lifting loops. Then they knit, adding 8 strong columns in each row.

• interesting selection on the site !!!
• Children's hats, without adult models

3. Circle of columns with 1 crochet (С1Н). Knitting begins with 5 VPs, which are closed in a circle with a half-column. They make 3 VPs for lifting and knit, attaching another 11 C1H to the inside of the ring from the VP - together with the lifting loops, you get 12 C1H. They close the row with a half-column and again make lifting loops. Then they knit, adding 12 C1H in each row. Scheme 2.

Methods for making increments when crocheting hats.

Knitting can be mentally divided into wedges according to the number of columns of the first row. That is, for RLS it is 6 wedges, for strong posts it is 8 wedges, and for C1H it is 12 wedges. Increases can be done in several ways, which will give different shapes of the bottom. If we perform increments on top of each other, then a visible angle will form in this place and a polygon will turn out instead of a circle. But for a hat, this will sometimes give additional opportunities.

1. The increase is always performed on the last column of the wedge. In this case, symmetrical wedges will be obtained with a noticeable increase line between them.

2. The increase is always performed on the first column of the wedge. You will get symmetrical wedges, slightly rounded to the right, with a noticeable increase line between them.

3. Increases are performed in each wedge so that they are not located one above the other. The easiest way to shift increases is to knit 2 columns in a loop immediately after the increase in the previous row. In this case, a flat circle without visible corners will be obtained.

But I must say that I knitted such a hat from ordinary acrylic, it was also excellent, it was soft, voluminous and beautiful. The author of the model is Svetlana Raeva. Younger girls can sew on a fur pompom.

There will be three types of knitting hats. Knitting with a seam, knitting in a circle from top to bottom and knitting from top to bottom. Choose which one is better and more convenient for you.

Description of knitting hats from the bottom up:

The cap is knitted in the direction from the bottom up, the main part is made with a “braid” pattern without reductions, like a pipe around the circumference of the head, and at the crown the pattern narrows due to the reduction of the columns and rapports of the pattern.

To start knitting a hat, cast on a chain of air loops with a length equal to the girth of the head, while the number of loops should be divided by 5 - the repeat of the pattern. For a hat on the 52nd head size, it was necessary to dial 140 air points, which is equal to 28 rapports of the pattern.

Crochet pattern:

Close the dialed initial chain into a ring with a connecting column in the first loop. To start knitting the first row, make 3 air p. lift, then knit, repeating 2 air p., 3 tbsp. s / n. Finish the row by making in the last 2 loops of the row 2 tbsp. s / n and conn. Art. in the 3rd lifting loop.

When knitting the next row, groups of 3 tbsp are knitted. s / n and lush columns with a base from the previous row. To start knitting the second row, make 3 air p. lifting + 2 air.p. in a row. Next, between the groups of columns of the previous row, knit 3 st.s / n, then knit a magnificent column. To make a fluffy column, insert the hook behind a group of 3 columns of the previous row, grab the working thread and pull a long loop to the level of the second row, then yarn over the hook. To form a fluffy column, you need to pull 5 long loops from one point, after each long loop, yarn over on the hook. To complete the knitting of a magnificent column, knit the entire bunch of elongated loops, throwing them off the hook, and to secure, make 1 air loop.

Having connected the first magnificent column, then knit the following rapport of the pattern: 3 tbsp. s / n between groups of columns of the previous row and a magnificent column, introducing a hook for a group of 3 tables of the previous row.

For the last rapport, do 2 tbsp. s / n and soed.st. in the 3rd lifting loop to complete the circular row, and so that the “braid” pattern is not interrupted, perform another magnificent column and secure its top of the connection. on the next loop of the row.

The third row of the "braid" pattern is knitted in the same way as the second, but in order for the lush columns to lie in a different direction, the rows must be knitted back and forth, and not in a circle. To connect the rows in a circle, do the connection. at the end of the row, while the first 3 air.p. lifting will be instead of the last st.s / n from the group of 3 columns. After the connecting column at the end of the row, a magnificent column is made, then the transition from row to row will not be visible, the top of the last magnificent column is fixed by the connection. in a row, after it a new row begins.

So, for knitting the 3rd row, turn the work so that knitting goes in the opposite direction, make 3 air p. + 2 air.p. in a row.

W then repeat the pattern repeat: 3 st.s / n between the groups of columns of the previous row, a magnificent column, introducing a hook for the group of columns of the previous row. At the end of the series, do the last rapport 2 tbsp. s / n, connection art. in the 3rd air.p. lifting and a magnificent column, the top of which is fixed with a connection. following the loop.

Knit a hat to the desired height up to 12-15 cm, completing 12 rows of the pattern or more. Then begin to narrow the braid pattern gradually.

In the 13th row, instead of groups of 3 st.s / n, knit 2 tbsp. s / n in each rapport of the pattern.

In the 14th row of the pattern between the lush columns, knit only 1 st.s / n, the lush columns themselves also need to be made less voluminous, for this, form them not from 5 elongated long loops and 5 yarn overs, but make only 4 long loops and 4 crochets.

From the 15th row, the rapports of the pattern begin to decrease in 4 places, at regular intervals. At the place of decrease, knit 2 double crochets with one top from one and the second gap between the rapports, then make 1 magnificent column, inserting the hook behind the leg of the far column of the previous row.

In each row, 4 rapports of the pattern are reduced, the number of lush columns is reduced, the “braid” pattern almost does not disturb its course.

For example, at the beginning of 28 rapports through 6 rows, their number will be reduced to 4. At the end of the knitting of the hat at the crown, knit the last row of 8 st.b \ n and pull them to one point, cut the thread and fasten.

Hat with pompom

This hat is knitted from yarn of several colors of cold shades: blue, violet, blue and lilac. The hat ends with a colorful pom-pom. To knit a hat, you will need a hook number 3.5. The high consumption of yarn for a hat is compensated by the fact that the product is very warm. If you strengthen the hat with a lining, then it can be worn even in winter.

Pattern master class:

Description of knitting pattern:

The more yarns you make, the more magnificent the column will be.

Dial a chain of air loops of the required length, given that the rapport consists of 5 loops and 3 lifting air loops.

Knit the first row * 3 tbsp. s / n, 2 air loops, repeat from * to the end of the row. We start the second row with 4 air loops, from an arch of 2 air. we knit 3 sts of s / n loops and begin to knit a magnificent column.

We make a crochet, insert the hook for the 2nd column from the group of columns of the previous row, grab the working thread with a hook and pull out the 1st loop.

Repeating from *, we draw 4 more loops. Then, grabbing the working thread with a hook, we first knit all the elongated loops,

Once again, grab the thread and knit the remaining two loops on the hook.We make one air loop and again we knit a group of 3 columns from the next arch.Thus, we knit lush columns to the end of the row. We also start the next row with 4 air loops and knit in the same way as the previous one, and the slope of the lush columns will be in the other direction, which forms the braid pattern.

Decreases and additions in knitting a fabric with a wicker pattern:

To add in a fantasy pattern at the beginning of the row, instead of 5 air loops, perform: 3 lifting air loops, knit 2 double crochets in the first loop, then start knitting pattern repeat: 1 air loop, 3 double crochets from the arch in front of the magnificent column of the previous row, then knit a fluffy column from the group of double crochets of the underlying row. Having knitted to the end of the row, finish knitting with three double crochets from the last loop.

Knit the next row without adding groups of double crochets at the beginning and at the end of the row, but increasing the number of rapports due to the added groups in the previous row. Start with 5 stitches and end with 1 double crochet. Thus, on both sides, the canvas expanded by two rapports.

If necessary, repeat the additions as many times as necessary, expanding the canvas.

To decrease, it is enough to knit at the beginning of the row with connecting loops until the beginning of another rapport and start knitting a row, and at the end of the row do not knit one pattern rapport.

Pattern scheme

Hat and snood

on size 57

You will need:

Yarn Svetlana PSh "Semenovskaya yarn" 50% wool, 50% acrylic 100 gr/250 m-2 skeins of gray color
Yarn Nymph Kamteks 35% wool, 65% acrylic 100 gr/300 m-2 skeins of turquoise color
Needles No. 2.5, No. 4.5
Knitwear needle, 6 markers

Used patterns:

Elastic band 1/1:In faces. rows alternately 1 person., 1 out., in purl knit according to the pattern.
Knitting density: 10 * 10 cm = 20p * 35 p
The main pattern "Spikelets": Knit loose!
Cast on an odd number of stitches for the pattern.

1 row: remove the edge loop, knit 2 together with the front loop behind the back wall, without removing it from the left knitting needle, knit the first loop again with the front loop behind the back wall, etc. Knit the penultimate loop together with the edge loop in the same way as all previous pairs of loops.

2 row: remove the hem, knit 2 together with the wrong side, without removing from the left knitting needle, knit the first loop again with the wrong side, etc.,
Knit the penultimate loop together with the edge loop in the same way as all previous pairs of loops.

Pattern repeat from the 1st row.
Density of knitting with the main pattern: 10cm * 10cm = 8p * 12 p

Description of work:

Beret (size 57)
Band:on knitting needles No. 2.5, type with gray yarn (thread in two (2) additions!) 103 p., And knit 3 cm with an elastic band 1/1.
Transition: change thin needles to needles No. 4.5, and then use turquoise yarn for work (thread in five (5) additions!).
Tula:knit 1 p. persons. p., 2nd p. (purl), as the 2nd p. pattern Spikelets", and then continue knitting with this pattern.
After 6 p. cut one turquoise thread and replace it with gray, do this every 3 rows, and finish knitting with five (5) strands of gray thread.
Bottom:after 16 p. start making amends. To do this, divide the entire number of loops with markers into six wedges. Make reductions in faces. p-x as follows: 4 p. knit together persons. behind the back wall, without removing it from the left knitting needle, knit the 1st p. again. behind the back wall.
Completion: cut the working threads, leaving a long free end sufficient for making the back seam of the beret, pass it through the remaining 14 stitches after reductions, pull it tight, and without tearing off, sew the back seam.
The finished product before the WTO has the shape of a cap, wash and shape a circle with a diameter of 28 cm, pulling it on a suitable dish or a special block, and dry it.
Snood:knitted with a thread in four (4) additions!
On knitting needles No. 2.5, type with gray yarn (thread in two (2) additions!) 117 p., Knit 4 p. with an elastic band 1/1, change thin knitting needles to knitting needles No. 4.5, add two more threads and knit with the Spikelets pattern, gradually replacing the gray thread with turquoise.
After 25 r. cast off all sts and sew side seam.

The lesson is based on the cap of my daughter Varya. She is 2 years 3 months old. But, knowing the technique, you can knit this classic hat for any size.

COCO yarn 100% cotton. At 50gr. 240 m. Green yarn took about 35 grams. And on the flower - a little milk. Hooks No. 2.25 and No. 1.75.

Photos increase when you click, so you can see everything from the loops!

Before you start knitting, you need to take measurements from the head:
1. Girth (circumference) of the head. We draw a centimeter tape horizontally above the eyebrows and at the level of the most protruding part of the back of the head. In our case, the circumference of the head is 48 centimeters.
2. Depth. If we want a cap in depth to the beginning of the eyebrows, then we draw the tape from the middle of the lobe of one ear to the middle of the lobe of the other ear through the center of the crown. In our case, this measure is 36 centimeters.

If we need a hat to the middle of the eyebrows, then we measure the depth not from the middle, but from the end of the lobe of one ear through the center of the crown to the end of the lobe of the other ear.

Crochet hats are most often knitted:

1. From the bottom to the crown. The advantage of this method is that if we take a straight linen pattern for a hat, then it will not be turned upside down, but will remain as it is, since the straight linen patterns are read from the bottom up, and the hat is knitted from the bottom up. This is where the pluses end. Cons: it is necessary to knit a sample in order to calculate the loops at the beginning of knitting. You can, of course, make a “tricky move”: pick up a chain of air loops, wrap it around your head and knit according to such a “calculation”, but then the evening will be wasted, because we are unlikely to get the size. Only a full-fledged sample and calculation on it! Another disadvantage of knitting from below is that we will not get such a perfect crown, unlike knitting a hat from above. Although this does not apply to all patterns.

2. From the crown - from top to bottom. This method is probably chosen in 90% of cases, primarily because it gives the perfect crown, and allows you to easily adjust the size while knitting. I myself crochet hats from the crown, I recommend the same to you.

How to knit the crown of the hat?

The top of the hat is knitted in the round. The main part and the rim - a pipe. There are certain rules for forming a circle.
For a double crochet circle, they are:
1 row - we knit 12 CCH;
2nd row - 24 CCHs: 2 CCHs are knitted into each column of the previous row;
3rd row - 36 CCHs: 2 CCHs are knitted through a column;
4 row - 48 CCH: 2 CCH are knitted through two columns;
5 row - 60 CCHs: 2 CCHs are knitted through three columns;
6 row - 72 dc: 2 dc are knitted through four columns, etc.

Thus, to increase the diameter of the circle in each row, 12 columns are evenly added, knitting two columns into one loop in each wedge. In total, there are 12 wedges in such a circle of double crochets. Bonus distribution options:

Choose the method of increase that you like best. I use the second method - I make an increase at the end of each wedge.

If we tie 13 wedges instead of 12, then before switching to the pipe, the circle will look neat:

But, when we move on to knitting the main part, it turns out that the top of the head is fading, because of which it does not look quite neat, and in order to give the hat a neat look, you will have to work properly with a steam iron:

The diameter of the circle to which you need to knit the crown is calculated by the formula:
Head circumference divided by 3.14 (pi number).
48 cm: 3.14= 15.3 cm. This is also the diameter of the widest part of the cap.

In order for the cap to fit the head beautifully, the transition from the crown to the main part of the cap must be made smooth. To do this, subtract 3–3.5 cm from the calculated circle diameter.

After that, we knit these remaining 3-3.5 cm to the desired diameter with increments through a row: a row with increments, a row without increments, a row with increments, a row without increments, a row with increments. As a result, the crown will be rounded gradually and neatly, like a dome.