We have prepared for you interesting master class. If you are a fan of weaving balloons or beaded cords, this idea will definitely come in handy: with the help of a bead spinner, you can quickly collect the required number of beads per thread.

We will tell you how to make a spinner yourself. Try a homemade spinner before buying an expensive mechanical device. You will appreciate the convenience of its use.

Material for manufacturing

To create a spinner for stringing beads, you can easily find the material, you will need:

• a round lid with a flat bottom and high sides (at least 2.5 cm) or a plastic cup from yogurt, sour cream;
• ordinary ballpoint pen without a core;
• scissors;
• candle or lighter;
• ruler.

Having prepared necessary material, we can start assembling the bead spinner.

Process of creation

Great, if you use a lid to create a bead spinner, this will reduce the creation time, because it is already the right size, the right height, even, with smooth edges. And if you took a jar as a material, then you will need a little time.

Take your plastic cup and use a ruler to measure 2.7 cm from the bottom. Make markings on several sides and connect them together. The optimal height is 2.5 cm, but take a couple of millimeters in reserve, because we will singe the edges of the cup.

Take scissors, it is better to use small manicure ones with sharp tips. Cut off the bottom of the glass exactly along the line.

So that the part does not cling either in the process of creating a spinner for beads, or during subsequent work with the product, light a candle, singe the edges of the cut-off part. You can use a lighter, but a candle is more convenient for this step, it does not need to be held by a flint or a button.

The rod with which our spinner will spin will be the handle. Take out the ink from the pen. Turn the bottom of the cup over and mark the center on it. At this point, you need to cut a circle that will hold the shirt of your pen tightly.

The handle should sit tightly, there should not be any gaps so that the beads do not fall there. Inserting the handle, unscrew the head. Insert the handle into the cut hole and secure with the head by screwing it in from the back.

If it seems to you that the handle is loose, use hot glue, glue the handle to the bottom on both sides.

Check how your spinner spins, it should work like a top.

Here's how to make a bead spinner, quickly and easily from the most affordable materials. But how to use it?

Principle of use

To use a bead spinner, fill it with enough small beads. There should be a lot of them, but not to the brim - 2/3 capacity. A large number of beads can scatter, and a small one is difficult to pick up. If you don't have a lot of it, it's better to make several spinners of different sizes. For example, from a wide cup of sour cream and a small plastic one for drinks. So you can always quickly pick up beads, it will not scatter or crumble over a huge bottom.

Take a fishing line or wire, attach the end to the beads with your left hand, twist the spinner by the handle with your right hand. Hold the wire slightly at an angle. Rotate the top gently, slowly, so the beads will be neatly strung on the wire and will not scatter around the corners of the room. All that is required of you is to twist the rod and periodically move the chain of beads further.

In a matter of minutes, you will have a long garland of beads.

Advantages

The spinner for beads has a number of significant advantages, for example:

• simplicity - the spinner works simply, a simple mechanism does not require effort;
• saving time - a chain of beads is typed very quickly, ten times faster than if you put one bead on the wire;
• Convenience - You don't have to bend your back over the table while casting, you don't have to strain your eyes and you don't need good lighting to quickly and easily cast on a long row of beads.

Here is such a wonderful master class, we hope it will be useful to you. This simple device can be created in a few minutes and greatly simplifies the process of setting beads on a fishing line, thread or wire.

Despite the fact that the peak of popularity of the anti-stress toy, fashionable in 2016-2017, began to subside, many are still looking for ways to create an original little thing that will help to have fun on long trips, long lines or in heavy life situations. Naturally, we are talking about a do-it-yourself spinner. How to create it at home, and what you need for this - more in our material.

What are spinners for and how do they work?

Each twist dismantles the individuality of its owner.

fidget spinner is a rotating flat or three-dimensional toy that is popular with adults and children around the globe. Its main purpose is to occupy and distract . Someone thinks that spinner useful , because thanks to him you can distract from everyday and psychological problems, relieve irritability, get rid of excitement. Others claim that thanks to the turntable you can focus on the right things , distracting from everything superfluous. Be that as it may, the glory of the toy needs no explanation, because literally everyone loves it.

There are many forms of the so-called hand twister. It will depend not only on the invented design, but also on the component parts available in stock. To understand the specifics of the work when creating a do-it-yourself spinner, you need to know just a few important points.

The obligatory traditional elements of the spinner are:

• bearing;
• wings.

The most important part of a spinner is the bearing. It will depend on him how long and quickly the toy will spin, as well as its soundtrack and vibrations emitted. In many homemade toys, bearings are often replaced with primitive toothpick designs. , which also allow the wings of the toy to spin.

Popular articles:

Wings, or petals, can be from two to six , but often you can find two or three petals. It is these elements of the spinner that give room for imagination, allow you to embody bold ideas, show individuality.

Unusual design of one of the most primitive forms of toys - round.

The so-called spinners made of plastic, metal, wood, cardboard and many other materials. Often materials are combined. Recently, plastic or metal toys with luminous wings.

Products made of plastic, wood and copper.

The design of many do-it-yourself spinners is amazing. Many decorate their toys with interesting engravings, illustrations, badges. . The model of a small spinner that fits in the palm of your hand allows you to characterize its owner without further ado.

Spinner in the shape of a Snitch.
Fabulous illustrations and details look very interesting on spinners.
Male turntable design.
Recently, glow-in-the-dark toys have become very popular.
Fidget spinners in women's design.

Today, a spinner can be bought in almost any store. There are budget models, and there are expensive original or even designer ones. But in order to stand out from the crowd, you need to make a certain effort, for example, do it yourself original thing for yourself or your child, relative, friend (for example, as a gift). If a kid asked for such a fashionable product as a spinner, so much the better, because he can be involved in the creative process, starting with choosing a model and ending with the creation of a memorable toy.

General instructions before starting work

Before you start working on your spinner, you need to have an idea of ​​what exactly the person wants to get as a result. So that the result does not disappoint, you need to work according to a simple scheme.

• Stage number 1 - we select a model and design

Since there are countless possible models of spinners, and we are all different, and we like different things, for starters, you can choose the right model from the simple ones. This is necessary so that the process does not turn into a punishment. Or you can go the other way and choose the most original model from a special material with an unusual shape. This option is suitable for those who have already tried to create things with their own hands.

Do-it-yourself hand spinner options.

• Stage number 2 - draw and draw

To make it work, you should take care of the drawing on a scale of 1: 1. You can draw a future spinner model on paper, or you can search for finished drawings on the vast expanses of the Internet.

Drawings and blanks.

• Stage number 3 - we prepare tools

Now that the creator has decided on the design, and the schematic image is ready, you can begin to prepare all the necessary materials.

The first step is to purchase (or remove from old equipment) a bearing. It can be made of metal or ceramic. The most acceptable option is a diameter of 2 mm. To ensure a pleasant pastime in the future, professionals advise clean the part from grease in a "bath" of gasoline before it is in the toy. Why clean the bearing from grease? It makes the rotation slower, besides, it stains hands, clothes and furniture.

In addition to the prefabricated parts of the spinner, you will also need the following tools:

1. Construction marker (pen, pencil, regular felt-tip pen);
2. Scissors;
3. Stationery knife;
4. Elements of decorative trim (optional);
5. Glue;
6. Special tools for creating the wings we need (tools for working with wood or metal).

Preparatory stage.

• Stage number 4 - create a spinner

When the preparation is over, you can safely start making a toy with your own hands. Next, consider several popular options for creating spinners from various materials in several ways.

Varieties of twisters for hands created from improvised means.

Paper and cardboard spinner without bearing

The most popular option for those who are in no hurry to run after the bearing and cut squiggles out of metal or wood is to make the first simple spinner out of cardboard and paper. Doing it yourself is really easy, and if you show a little more imagination, then a simple cardboard box can turn into an original canvas for your favorite icons or drawings.

Tools for work:

1. ruler;
2. compass;
3. pencil;
4. pen;
5. scissors;
6. stationery knife;
7. cardboard;
8. glue;
9. toothpick;
10. nut - 2 pcs.

You can watch the video step by step:

With plastic lids

Another simple way to create a do-it-yourself spinner, which will take a little more time, is a model from ordinary bottle caps. By the way, this method also does not require bearings. Here is a little step by step guide.

Tools for work:

1. caps - 4-6 pcs.;
2. plasticine (you can kinetic sand);
3. glue gun;
4. glue stick;
5. lighter;
6. awl;
7. stationery knife;
8. toothpick;
9. scissors.

Progress:

• Fill three covers (or more if the spinner has more wings) almost to the top with plasticine. We fix it with a layer of glue from the gun, which should fill the lids to the top.
• The main cap remains without filler. In it, we make a hole with an awl in the very center. We glue plasticine covers on the sides to this central part of the future spinner. It is important to do this at an equal distance from each other.
• Take a stick of glue and cut off two equal parts - about 1 cm each.
• We break the toothpick in the center. We insert it into the central cover and attach pieces of a silicone rod to the ends so that it is convenient to hold the piece of wood.
• Do-it-yourself spinner is ready!

Wooden with bearing

A wooden spinner is the most pleasant and affordable option that you can create with your own hands. A real labor lesson for adults and children!

Tools for work:

• Glue gun;
• Bearing 2 mm;
• Plywood sheet, thickness 5mm;
• Several coins;
• Drill;
• Jigsaw manual;
• Clamp;
• Scissors;
• Sandpaper;
• Pencil or building marker;
• Ready-made spinner template.

Progress:

1. Print out the diagram and cut it out. We fix it on a plywood sheet and circle it. It is necessary to mark the places in each of the circles where there will be holes.
2. We drill additional holes on the sides of the circles with the door, allowing you to cut out a beautiful circle figure from the inside of the wing.
3. The future spinner needs to be cut out of plywood with a jigsaw. Then carefully process the edges and surface with sandpaper to a smooth surface.
4. The bearing must be inserted into the hole prepared for it in the center. In case of difficulty, you can use a hammer and drive a metal element into a wooden one.
5. The wings of the "twist" need to be weighted - for this you will need coins. You can glue the weights for each hole in the following order: a five-ruble coin, then two, and again five, as shown in the video.
6. You can cover it with solid color paint, or you can decorate it in another interesting and original way - there is room for imagination, which is so nice to realize with your own hands.

Video tutorials on creating spinners

To get comfortable with creating a do-it-yourself spinner, you can check out some video tutorials on this topic. The conditions of creation can be very different, as well as materials and styles, but a home spinner can turn out to be no worse than a factory one.

Here is another way to create paper spinners, this time in the shape of a shuriken :

Minimalistic spinner made of bearings and clamps:

And here is a great version of the "turntable" for girls:

In beading, as in any needlework, along with complex manipulations, there are a number of simple monotonous operations. They take a lot of time, but further process impossible without them. In our case, we are talking about stringing beads on a fishing line.

Fortunately, modern gadgets come to the aid of craftsmen. One of them is a bead spinner. Let's figure out how this device works, and how to make a spinner for beads with your own hands.

Principle of operation

To understand how a bead spinner works, you need to imagine an ordinary spinning wheel.

The bowl with beads unwinds and the beads themselves are quickly put on a fishing line set at the right angle (90 degrees).

Advantages

Using a spinner for stringing beads has a number of clear advantages:

• saves time for a set of the required number of beads;
• the load on vision decreases, tk. there is no need to look for a hole in each bead;
• labor productivity increases.

The spinner for a set of beads allows you to significantly speed up the weaving process. But there is only one case when this gadget will be absolutely useless to you. This is the creation of a product with a complex pattern, when it is necessary to string beads on a thread according to color in strict accordance with the scheme.

Types and characteristics

There are two types of spinners for beads on sale: manual and automatic. Let's dwell on each of them in more detail.

Manual

A beading hand spinner is a plastic, ceramic or wooden bowl placed on a flat base with a convenient vertical handle in the center.

The bowl is easily untwisted, thanks to which the beads are strung on a fishing line. The master sets the rotation speed of such a spinning wheel independently.

Auto

The main difference between an electric bead spinner and a manual one is that its bowl rotates automatically. The master can only bring the fishing line. The spinning wheel works from the mains, although a battery-powered bead spinner can also be found on sale.

How to make a spinning wheel with your own hands

However, many needlewomen prefer homemade spinning wheels.

Photo source: http://biser-mania.ru/master-klassy/spinner-dlia-bisera

So, in order to make a bead spinner you need to find:

• a round plastic box with a flat bottom;
• body from ballpoint pen;
• a ruler to measure the required distance;
• pencil for marking;
• stationery knife;
• scissors;
• candle or lighter.

The algorithm for creating a homemade spinner for beads is as follows:

1. From the base of the box, a distance of 27 - 29 mm is measured upwards, a line is drawn, the excess part is cut off and the edges are scorched.
2. A hole is made in the center of the base of the box with a clerical knife, where the body of a ballpoint pen is tightly inserted. (So ​​that the handle does not slip, it can be glued with a glue gun).
3. The operation of the spinner is checked. It should spin like a spinning top.

Application

Let's take a step-by-step look at how to use a spinner for stringing beads:

• 2/3 of the bowl is filled with beads.
• The end of the fishing line is bent 90 degrees and lowered into the bowl.
• The vertical rod is neatly untwisted clockwise.
• Beads are typed on a fishing line.

As you can see, using such a device is convenient and simple. However, its ability to simplify the process of creating any decoration is quite obvious.

Storage and care

Neither purchased nor homemade devices require specific storage conditions other than a clean, dry area and protection from children and pets.

Plus, the chassis of purchased spinning wheels can be lubricated with machine oil.

• If you are professionally engaged in beading and do large amounts of work, then an automatic spinner will become your faithful assistant.
• For those who are just starting to learn the basics of working with beads and do not want to waste time on the monotonous stringing of beads, a manual spinner will come in handy.
• If you are not sure about the benefits of such a gadget and do not want to spend extra money, then try to make a bead spinner with your own hands.

However, which of the gadgets to give preference to, each master has the right to decide for himself.

If you like to crochet air balloons or beaded cords, then the process of putting beads on a thread cannot be called creative and inspiring.
But sometimes you have to collect beads on a thread of several meters.
What to do? How to make your work easier?

They come to help spinners- special devices to help collect beads.
They can be semi-automatic, i.e. hand-operated, and automatic, battery-operated. Sometimes craftswomen call them spinning wheels.

Guidelines for using "SPINNER":

1. We pick up a special needle supplied with the “SPINNER” and thread the thread into the eye. Cut off the end of the thread, tie it in a knot or leave it on a spool.
2. Then we take the beads and pour them into the “SPINNER”, filling it in half or a little more. We do not recommend filling the bowl to the brim, as the beads can scatter throughout the room.
3. We begin to rotate the metal rod of the device counterclockwise, holding it with the thumb and forefinger of the left hand. You need to rotate, slowly, very gently and smoothly.
4. Rotating the “SPINNER” rod with the fingers of the left hand, with the right hand we place the needle into the bowl, with the sharp end “against the flow” of the beads. We try not to touch the day of the bowl and not hold the needle so that its tip is visible. The needle should be held semi-horizontally, you need to feel it, feel its movement in the mass of beads, choosing the right slope.
And then the beads will themselves be strung on the sharp end of the needle.
5. As soon as the beads fill the needle halfway, we shift the beads onto the thread and continue to string.

Spinners can be purchased at craft stores.

For example, in the Ocean Beads store, such a semi-automatic spinner is 450 rubles.

In the Walmart store, such a spinner is already 37.99$

How to make a spinner for a set of beads yourself.

That's why we are needlewomen, that we can do everything with our own hands!
Here are some tutorials.

Craftswomen with extensive experience know how tedious and difficult the work of stringing beads on a fishing line can be. Hands and eyes get tired quickly, even with a minimum amount of work. You have to poke around for hours, and the volume is minimal. And if you also have to redo it, then the desire to do this further disappears altogether. To help craftswomen, there is a spinner for, which greatly speeds up and simplifies the process.

Translated from English, Spinner means a spinning machine. This is a reliable assistant that every craftswoman should use, regardless of skill level. There are many offers in the trading network. But the design is so simple that you can make it yourself. The information provided will introduce readers to how to make a bead spinner with their own hands. The most primitive machine, which is made from improvised materials that can be found in every home.

Step-by-step instruction

Before you make a spinner for beads, you need to prepare the material. You will need:

• plastic container;
• rod (case from a pen, pencil);
• stand;
• scissors.

Follow the suggested instructions. It only takes a few minutes to work.

1. Make holes in the containers with scissors strictly in the center. It is undesirable to use a knife, as the hole will turn out uneven.
2. Insert the rod, connecting the containers together as shown in the photo.

This is all the work, in front of you is a finished spinner.

Self-manufacturing option No. 2

For work you will need:

• plastic container;
• self-tapping screw

It is enough to insert a self-tapping screw in the center of the container, and the bead spinner is ready. It is better to heat the head of the self-tapping screw so that it sticks and remains motionless.

To make such a device at home, there is no need to involve men in the work. Any woman can handle this job on her own.

advanced model

For its manufacture you will need:

• an old computer fan or other rotating element;

​

• container for beads.
• glue.

It is enough to fix the container on the rotating surface and the work can be considered finished. Insert a special needle into the container. Slightly twist the device, the beads are recruited much faster.

Terms of use

If the craftswoman does not have experience in using a spinner, then the attached instructions will help you quickly master an indispensable assistant.

1. Fill the bowl.
2. Take a special spinner needle or just bend a piece of wire.
3. Lower the needle or wire into the container.
4. Slightly scroll the container with the other hand.

Beads are recruited on their own, it remains only to move it further along or.

By mastering this simple technology, you can save a significant part family budget. The trading network presents a large assortment of spinners. But most of them are quite high. The store presents simple electric spinners that will significantly speed up the process of collecting beads.

But if there is no need to purchase a ready-made spinner, then a special needle will be needed. For example, if you need to string beads on a soft fishing line, thread, then without a needle, even with a spinner, it will be problematic to cope with this. Such a mechanical device with my own hands in collaboration with the needle, will greatly facilitate the work of the craftswoman.