The most familiar to us view is longitudinal, when the model is knitted to the full width of the pattern vertically from the bottom up or from the top down. But very interesting effects can be achieved when knitting across - from one side seam to another. This technique is especially convenient when knitting models with a wide armhole and a straight sleeve.

Principles of cross-machine knitting. It considers the technology of partial knitting, the general rules for making a skirt, jacket and pullover. The principles of execution do not depend on the knitting technique - on knitting needles or crocheting, they are the same as in machine knitting, so the article will be a great help for understanding the knitting process and calculating increases and decreases.

After reading the theoretical course, it will be easier to understand how a long-sleeved women's pullover is knitted from the site rukodelie.by. The pattern used - Polish (aka corrugated) elastic - a structural pattern, more similar in extensibility to a regular front surface than an elastic band. Using calculations and principles, you can knit other patterns with cross knitting according to the same description.

Ideal for cross knitting. A simple elegant pattern - garter stitch paths (all rows of front loops), alternating with openwork paths. See description on website.

Cross knitting has gained incredible popularity in our time. In the article we will learn how to knit things with knitting needles in the transverse technique.

Cross knitting is possible to create original, beautiful things for both children and women.

original vest

With this knitting technique, you can get an interesting vest:

We will need Bouton d "Or threads: 8/9/10/ 11/12 skeins of Surya (55% viscose fiber from bamboo, 45% fiber from soy, 156 m / 50 g) gray-green (005); knitting needles No. 3 and No. 3.5; additional knitting needle.

We make 4 facial loops, crossed to the left: remove two loops for additional. knitting needle placed in front, we knit the next two loops, then two loops with additional. knitting needles.

8 facial loops, crossed to the left: remove four loops for extra. knitting needle placed in front, we knit the next four loops, then 4 loops with additional. knitting needles.

8 front loops, crossed to the right: remove four loops. for additional knitting needle placed at the back, knit the next four loops, then 4 loops with additional. knitting needles.

We need knitting needles No. 3.5: 34 p. And 37 p. = 10 x 10 cm.

Back. We collect 90/95/98/102/109 loops on knitting needles No. 3 and knit with an elastic band 1/1. At a height of 3 cm, we knit one row. out. loop on out. side on needles No. 3.5, evenly adding 32 loops. It turns out 122/126/130/134/141 p. Then we knit according to the scheme, making an increase on the left 15 × 1 loop in every second row. We get 137/141/145/149/156 loops. At a height of 21.5/23/24.5/26/29 cm, we close 2 loops on the right side to cut the neck, then close in every second row 3 x 1 p., In every fourth row 2 x 1 p. Remains 130 / 135/138/142/149 sts. Knit 138 rows according to the pattern, then continue to knit in a mirror.

Before. We knit similarly to the back, except for the neck. At a height of 21.5/23/24.5/26/29 cm, close on the left side to cut the neck 6 loops, then close in every second row 4 x 2 p., 7 x 1 p. Remains 116/121/124 / 128/135 loops.

Assembly. At the bottom of the back we collect 137/147/157/167/185 loops on knitting needles No. 3 and knit with an elastic band 1/1. At a height of 15 cm, close the loops, knit them according to the pattern. We carry out the bar in the same way at the bottom of the front. We carry out 1 shoulder seam. On the neckline, we collect 156 loops on knitting needles No. 3 and knit with an elastic band 1/1. At a height of 1.5 cm, close the loops. We carry out the second shoulder seam, we sew the sides and sleeves.

You can also knit a great coat. Here is the knitting pattern:

Cross-knit pullover

For a pullover for women you will need:

• half a kilogram of thick yarn;
• knitting needles No. 4;
• circular knitting needles number 3.

Basic pattern: “Polish gum”: (the number of loops, a multiple of 4 + 3 p.).

1 row: 3 persons. loops, 1 out. loops, 3 persons. loops; 2nd row: 1 persons. loop, 1 out. p., 3 persons. loops, 1 out. p., 1 person. P.

Knitting density: 20.8 p. x 35 p. = 10 x 10 cm.

Pattern:

We knit from the beginning of the sleeve.

We collect 37 loops and knit with the main pattern. For bevels, we add 1 loop from two sides in every fourth row 20 times (= 77 p.), In every second row 10 times (= 97 p.).

At a height of 54 cm, immediately on both sides we collect 34 loops (= 165 p.) And introduce new loops into the pattern. Then we knit 11 cm on all loops, after which we divide the work: for the back we leave 81 loops, we close 7 loops for the neckline, for the front - 77 p.

Before and back we knit separately 26 cm, then we collect 7 loops between them and we knit 11 cm on them all. After that, we decrease the number of loops on both sides in the reverse order: we close 34 loops, for bevels we decrease 1 loop in every second row 10 times, in every fourth row 20 times. At a height of 156 cm from the beginning, we close all the loops (= 37 p.).

Assembly. On the edge of the neckline, we collect 68 loops with knitting needles and knit five cm with a basic pattern, but in even rows of the loop of the pattern, it is the other way around: instead of the front - purl, instead of the purl - the front, five rows of the front surface, close the loops. Sew sides and sleeves.

Beanie

Detailed instructions for knitting hats with knitting needles can be seen below.

First, we knit the main element of the headdress - the crown, in the transverse direction. Next, along the long side of the main element, we collect loops and tie the bottom, making reductions to the top of the cap. At the end of the loops remaining at the crown, the hat is pulled together and sewn along the back of the head.

In order for the seam behind the hat to turn out to be invisible, you should sew the open loops of the main element with a “knitted” seam, connecting the loose first row and the open loops of the last one. It will not be difficult to dissolve the loops of the first row if at the beginning you make a set with a crochet hook, which is easy to unravel.

We collect forty loops and knit the main part of the hat with a long strip with a “braid” pattern in the middle. The initial and extreme loops are edge loops, form them in a “chain”.

From the hem, we knit the initial and last seven loops with a garter stitch (we knit these loops in the front and in the purl and in the front rows).

We knit the next eleven rows with the front surface and in the 25th front row we cross 16 loops from the second part of the central element of the cap. To do this, we knit the initial 8 loops with the front ones, remove the next 8 loops on an additional knitting needle and place them before work, knit the last eight loops with the front ones, then the loops from the additional knitting needle.

We repeat the weave pattern from the second to the 25th row five times, then we knit 12 rows with the front stitch. The finished main part of the cap should be equal in length to the girth of the head. At the end of the loop, do not close, re-shoot them on an additional knitting needle.

We knit the bottom of the headdress. On the top of the finished element, we collect loops, pulling from the edge of the loop onto the working knitting needle. We collect loops from the front side so that a row of edge loops is on the wrong side.

We knit the dialed loops with an elastic band 1 front x 1 purl, 11 rows. In the 12th row, we knit all the loops in two together, collecting together two front and two purl together. Then we knit with an elastic band 1 × 1 four more rows, we decrease all the loops twice. We cut the working thread after knitting two more rows. Do not forget to leave a segment of a good length. We take a needle with a wide eye, insert and stretch the tip of the thread through the remaining loops and pull them together.

Size: S - M - L - XL - XXL - XXXL

Bust: 88-88-110-110-130-130cm

Length: 70-72-74-76-78-80cm

Knitting density: 11 p. x15 p. \u003d 10 cm x 10 cm in front stitch

(Scheme M.1 = width ~ 4.5 cm, scheme M.2 ~ 12 cm)

You will need: 500-550-600-650-750-800 g Eskimo (100% pure wool, 50 m / 50 g) color 052, light blue/grey, 8 mm (80 cm) circular needles, 7 mm (80 cm) circular needles — for placket, 3 metal buttons

In the diagrams, the pattern is shown with RS.

Making additions 1: adding 1 p from the broach between the loops - cross. purl, i.e. knit behind the back wall of the loop to avoid holes.

Making additions 2: adding 1 p from the broach between the loops - cross. facial, i.e. knit behind the back wall of the loop to avoid holes.

Buttonholes: bind off loops for 3 buttonholes on right front panel.

1 buttonhole= cast off 1 st and cast on 1 new st in the next row above this st.

Elongated transverse jacket job description:

Left back and front: are made in one piece, straight and reverse rows on circular needles, starting from the middle of the back. Cast on 81-83-85-88-90-92 sts for back piece in rounds, using 8 mm needles.

1st row (= WS)- persons all p. Knit a trace, a row (2nd row \u003d RS) as follows: knit the scheme M.1 A (= 3 p), knit the scheme M.1 (= 5 p) 5-5-5-6- 6th time, then work in Chart M.2 (= 18 sts), 31-33-35-33-35-37 sts in stockinette stitch, finish with p1, k1, p1 and k1 (= 4 edge sts with ribbing ). Work 2-2-4-4-6-6 more rows in the same way with 4 edge sts in ribbing on the sides. Then adding, for the neck as follows:

Row 1 (= WS): knit until 3 sts remain on the needle (= scheme M.1A), purl 1, knit 1, inc. 1 p - see Inc 1 above, finish with 1 knit.

Row 2 (= RS): Knit scheme M. 1 V on the first 4 stitches on the needle, continue in the pattern.

Row 3: knit until there are 4 stitches left on the needle (= scheme M.1B), 1 out, 1 persons, 1 out, adding. 1 p. and finish with 1 p. = 83-85-87-90-92-94 p.

Row 4: Work Chart M.1 on first 5 sts on needle, continue in pattern (= 6-6-6-7-7-7 repeats of Chart M.1 in total).

Row 5: Knit entire row, cast on 84-86-88-91-93-95 sts for front at end of row = 167-171-175-181-185-189 sts on needle.

Row 6 (= RS): K1, p1, k1, p1 (= 4 selvedge sts), 31-33-35-33-35-37 sts in stockinette stitch, row 1 in M.2, k1, then M .1 12-12-12-14-14-14 times in total (= 60-60-60-70-70-70 sts), chart M.2, 31-33-35-33-35-37 sts in stockinette stitch , finish with 1 out, 1 persons, 1 out and 1 persons (= 4 edge loops with an elastic band). Continue along the pattern and 4 chrome. with an elastic band on both sides of the part. Remember about the density of knitting!

When the M.2 pattern on the back is knitted only 4-4-5-5-6-Є times (the length of the back will be approximately 23-23-28-28-33-33 cm from the inlaid edge, insert 2 markers in the piece with RS as follows 58-60-62-60-62-64 sts (= front), 1 marker, 51-51-51-61-61-61 sts (= sleeve), 1 marker, 58-60-62-60- 62-64 sts (=back) Now finish each piece separately.

Left shelf: Work Row 1 (= RS) as follows: Work 58-60-62-60-62-64 sts (to 1st marker) in patt and stockinette st as before, turn piece. Beg next, row (= WS) cast off 23 sts (= 1 repeat of Chart M.1 and Chart M.2) for all sizes, work to end of row. Cast off 10-12-12-12-12-12 sts at beg of next. 2 rows in WS = 15-13-15-13-15-17 sts remaining on needle, loosely cast off all sts in next. row.

Sleeve:= 51-51-51-61-61-61 stitches (= knit 1 + 10-10-10-12-12-12 repeats of scheme M.1). Knit 2 rows - all persons according to the scheme M.1 (1st row = RS). At the beginning of the trail. 2 rows close 1 loop. Rep BO at the beginning of each row on both sides a total of 5 times = 41-41-41-51-51-51 sts (K1 st + 8-8-8-10-10-10 reps of M.1). At a piece height of approximately 35-35-36-39-42-42 cm (adjust so that the last row is the 2nd row according to the scheme M.1), loosely close all sts according to the drawing (face over face and out. over out.).

Left back:= 58-60-62-60-62-64 sts. In the 1st row with RS cast off 23 sts at the beginning of the row for all sizes, knit to the end of the row. Cast off 10-12-12-12-12-12 sts at beg of next. 2 rows with RS = 15-13-15-13-15-17 sts left on needle, loosely bind off all sts in next. row.

Right back and front: performed in one piece. Cast on 81-83-85-88-90-92 sts for back piece on rounds using 8mm needles. Row 1 (= WS)-Knit all sts. Work next row (Row 2 = RS) as follows: K1, P1, K1, and P1 (= 4 edge sts in rib), 31-33 -35-33-35-37 sts in stockinette st, then work Chart M.2 (= 18 sts), Chart M.3 (= 5 sts) 5-5-5-6-6-6 times, end with Chart M. FOR (= 3 p).

Work 3-3-5-5-7-7 more rows in the same way with 4 edge sts in ribbing. Then adding, for the neck as follows:

Row 1 (= RS): knit until 3 sts remain on the needle (= scheme M.ZA), k1, p1, inc. 1 p - see the execution of additions 2 above, finish 1 out.

Row 2 (= WS): knit M.ZV on the first 4 sts on the needle, continue along the pattern.

Row 3: knit until 4 sts remain on the needle (= scheme M.ZV), 1 knit, 1 out, 1 knit, adding. 1 st and finish with purl 1 = 83-85-87-90-92-94 sts.

Row 4: Work Chart M.3 on first 5 sts on needle, work to end of row (= 6-6-6-7-7-7 repeats of Chart M.3 in total).

Row 5 (= RS): knit the whole row. At the end of the row cast on 84-86-88-91-93-95 new sts for front = 167-171 - 175-181 -185-189 sts on needle.

Row 6 (= WS): P1, k1, p1, k1 (= 4 edge sts with ribbing), 31-33-35-33-35-37 in stockinette stitch,

8th row according to scheme M.2, 1 out, then scheme M.3 in total 12-12-12-14-14-14 times (= 60-60-60-70-70-70 p), scheme M.2, 31- 33-35-33-35-37 sts in stockinette stitch, finish with k1, p1, k1 and p1 (= 4 edge sts in ribbing). In the next, in a row with drugs, perform the 1st row according to the M.2 scheme for the front. Knit as left back and front, but mirrored.

Assembly: Sew both parts together along the line of the middle of the back. Sew sleeve seams and side seams.

Plank: knitted in straight and reverse rows on circles, knitting needles 7 mm. Starting at the bottom edge of the right front, pick up with RS for about 180-210 sts along the right front, around the neck and down along the left front. Next, row (= WS) - knit, simultaneously align the number of loops to 191-195-201-209-215-219. Knit trace, RS row as follows: K1, * P1, K1 *, repeat from *-* to the end of the row. Continue in the same way with an elastic band about 4-4-4-5-5-5 cm. Then insert 2 markers; 78-80-80-84-86-88 sts each side = 35-35-41-41-43-43 sts between markers. In the next, along with drugs, adding. 17-17-20-20-21-21 stitches between markers as follows: knit to marker 1, then knit 1, * inc. 1 p, p1, k1 *, repeat from *-* to 2nd marker, work to end of row = 208-212-221-229-236-240 p. When the strap measures 5-5-5-6-6-6 cm cast off evenly for the 3 buttonholes on the left strap - see explanation above. When the strap measures 8-8-8-9-9-9 cm, cast off all sts loosely.

Cross knitting of a jacket with knitting needles for a girl with an openwork pattern on the bottom

Cross knitting, knitting jacket for girls

How to knit a jacket with knitting needles for a girl with cross knitting from the left shelf to the right.

Size: 6/9-12/18 (2-3/4) years
Size in cm: 62/68 - 74/80 (86/92-98/104) cm.
Materials: 150-150 (200-200) g of DROPS BABY MERINO yarn (100% wool, 50 g / 175 m) color A and 50 g color B, needles 2.5 mm., hook 3.0 mm., 3 buttons.
Knitting density: 26 sts * 51 rows = 10*10 cm in garter st.

Garter stitch: all rows knit facial loops.
Pattern: follow the diagram, the diagram is shown on the front side.
Advice! When we perform short rows, turn the part, remove the first loop not knitted and tighten the thread.

How to knit a children's jacket with cross knitting needles:

Left shelf: Cast on 62-68 (78-88) sts on 2.5mm needles. thread A.
Knit 8 rows in garter stitch, starting with the front row.
Track. Row (right side): K3, knit the next 15 stitches, at the same time pick up 8 loops above them (make a crochet), finish with facial = 70-76 (86-96) loops.
Track. row (wrong side): persons. loops., knit all yarn over the back wall (twisted loop).
Next knit: 3 stitches in garter stitch, chart (= 23 stitches), 44-50 (60-70) stitches in garter stitch.
SIMULTANEOUSLY, begin short rows (see knitting tip): *knit 30-32 (38-42) sts, turn, work to end of row, work first 46-50 (57-65) sts, turn, work to end of row, work first 64-70 (80-90) sts, turn, work to end of row, work all 70-76 (86-96) sts, turn, work to end of row, repeat from *
At a height of 16-18 (19-20.5) cm from the cast-on edge (measured along the longest side), cut the thread (= lateral side).

Sleeve: Slip first 41-45-52 (60-65) sts on extra needle.
Separately for the sleeve, cast on 40-45 (55-64) sts, work 29-31 (34-36) sts on left shoulder = 69-76 (89-100) sts.
Continue from RS: *work the first 40-45 (55-64) sts in garter st, work to end of row, work the first 63-70 (83-94) sts in garter st, turn, work to end of row, work all 69 -76 (89-100) sts in garter patt, turn, work to end of row, rep from * to height 16-17 (18-18) cm from scrapped sts (measure longest side)

Back and second sleeve: bind off the first 40-45 (55-64) sts of the sleeve, put the leftover sts back on the working knitting needles, put a mark on each side.
Continue to knit short rows on all loops as before.
At a height of 28-31 (35-37) cm from the mark (measure the longest side - the bottom of the jacket), slip the first 41-45 (52-60) loops on an additional knitting needle, knit the second sleeve as the first.

Right shelf: at a height of 16-17 (18-18) loops from the postponed loops, close the loops of the second sleeve and return the postponed loops to the common knitting needle, put marks on each side of the work.
Continue to knit in short rows as before in width as the left shelf.
Track. Row: K3, knit next 23 sts, dec 8 sts above them at the same time (knit 2tog), end with knit sts = 62-68 (78-88) sts.
Knit 3 rows in garter stitch.
In the next row, on the front side, make 3 holes for buttons: 41-45 (53-61) persons., nakid, 2 persons together., 7-8 (9-10) persons., nakid, 2 persons together., 7- 8 (9-10), nakid, 2 persons together., 1 persons.
Knit 5 rows in garter stitch.
Close loops.

Finish: with a white thread and crochet to tie the bottom of the jacket: 1 tbsp. b / n, * 3 v / p., 1 tbsp. s / n in the 3rd loop from the hook, skip 1 cm of the canvas, 1 tbsp. b / n, repeat from *.
Repeat piping for each sleeve.
Sew the seams of the sleeves.

2 years ago

Whom will you surprise with a hat tied with an elastic band or vertical braids? Modern women of fashion who like to spend their free time usefully are gradually mastering cross-knitting hats. It is on this topic that we will talk today.

A real woman should look irresistible in any weather. As soon as the cold comes to our heels, the first thing we take out of the closet is a women's hat with knitting needles. Cross knitting is familiar to many. In practice, this technique was used by many craftswomen. Just the fabric needs to be knitted in short rows.

For more than one year, the beanie hat has been at the peak of popularity. This is not a specific style of headgear, most likely, beanie is a collective concept. This is the name of any elastic hat without fasteners and ties. You can knit it in the form of a head or in the form of a stocking. Everyone chooses their own option.

The main advantages of cross knitting include the following:

• hidden seam;
• perfect hat shape
• correspondence of the headgear to the girth of the head;
• interesting drawing.

The easiest way is to knit a beanie hat with front stitch. Due to the cross knitting, all the scars will be vertical. It looks original and incredibly beautiful.

On a note! Before you start knitting a hat, you need to measure the circumference of your head. From the selected yarn with knitting needles of the appropriate diameter, knit a sample about 10x10 in size and determine the knitting density. This is necessary for the most accurate calculation of loops.

Necessary materials:

• plain or melange yarn - 1 skein;
• knitting needles of the appropriate diameter.

Step by step description of the process:

1. In the classical way, we collect 58 loops on the knitting needles.
2. The first loop in the row is removed without knitting, the last is knitted with a purl loop. So we will do in each row.
3. We knit the first six rows with completely facial loops.
4. From the next row, we begin to knit the first wedge. It is thanks to the knitting of shortened rows that the cap fits the head, and you can definitely determine the right size.
5. We knit 50 loops with the front surface. We have eight loops left in this row on the main knitting needle, we will not knit them.
6. Before unfolding the product, we perform the following action: we throw the working thread in front of the canvas. We do this in front of the first loop on the left knitting needle.
7. We unfold the canvas on the wrong side. We also knit the next row with facial loops. Now we knit one loop more, that is, 51.
8. We have seven loops left on the main knitting needle. Again, we throw the working thread in front of the canvas and unfold the product.
9. In the next row we knit 52 loops. There are six stitches left on the needle.
10. We unfold the product and continue to knit the hat only with facial loops each row, capturing one loop more.
11. In the ninth row, we knit all the loops, only the edge remains on the left knitting needle.
12. Our first wedge is ready. From the 10th row, we begin to knit the second wedge according to the same principle. First, leave eight untied loops on the left knitting needle and so on.
13. We knit as many wedges as necessary according to the size of the head.
14. In the last row, we close all the loops. It remains to connect the side parts of the cap. The seam can be done with a needle or crochet.

Headdress for a true lady

Each needlewoman can master knitting a hat with a transverse oblique knitting needles. Basically, in all knitted products, the braids are arranged vertically. But such a pattern is unlikely to surprise anyone. Horizontal braids look original and add extra volume to the headdress.

You will get a stylish hat with knitting needles. Cross knitting, the patterns of which are quite simple, you will like.

Necessary materials:

• yarn - 1-2 skeins;
• knitting needles of the appropriate size.

Step by step description of the process: