Floor vases from origami modules assembly diagram. Modular origami: vase for beginners, assembly diagrams with video. Modular origami "Vase of flowers" is ready

Very beautiful do-it-yourself modular origami vase. The two-tone palette makes for an interesting combination. it unusual craft, which can be made from paper of all colors.
Necessary parts for creating crafts:

Paper triangles for origami purple and white;
Glue gel or glue gun.

Stages of work:
We start the assembly with triplets purple, which we place as illustrated in the photo:

In total, you need to make 14 triplets. We close the blanks in a circle. We collect two more circular rows of purple triangles, 28 parts in each row. The result is the following:

4r. - assembly is carried out with white triangles. In the current row, you need to increase the number of modules to 35. To do this, for every fourth origami triangle from the previous row, you need to string not 1, but 2 elements at once

5r. - 35 purple triangles;
6r. - alternation of elements according to the scheme: 1 origami triangle white, 4 purple

7r. - in this row, you need to increase the number of components to 42. To do this, we assemble as follows:
We string 2 paper triangles of white color on the white element of the previous row, then 1 purple, then 2 purple on one triangle of the previous row

and purple again, dress as usual.
Further, the combination is repeated until the end of the row.
8r. - alternation of elements: 3 white, 3 purple modules;

9r. - alternation: 4 white, 2 purple elements;

10 rub. - alternation: 1 white triangle is inserted between the two purple of the previous row, then - 1 purple, 3 white, 1 purple;
11r. - alternation of elements according to the scheme: 1 purple, 2 white;

12 rubles - alternation: insert 1 purple origami triangle between the two white ones of the previous row, then - 1 white one;

13r. - alternation of elements: 2 purple, 1 white;

14r. - alternation: 1 purple, 1 white, 3 purple, 1 white;

15 rubles - alternation: 2 white, 4 purple triangles;

16r. - alternation: 1 white, 5 purple;

17r. - 42 purple components;
18r. - 42 white triangles;
19r. - in this row, you need to reduce the number of elements to 28. To do this, we put 1 white on 3 corners of the modules of the previous row (1.5 modules).

Here is the end result:

In this row, you can fix the triangles with adhesive so that they do not move as a result of subsequent assembly.
20 rub. - 28 purple origami triangles. Starting from this row, we dress each triangular module slightly lifting it and giving it forward.
21r. - alternation: 1 white, 1 purple element;

22r. - we reduce the number of triangles in a row to 19. We dress 18 white elements in the same way as in the 19th row, and we dress the nineteenth as usual, at two corners.

23r. - 19 white elements;
24r. - 19 purple;
25 rub. - 19 white triangles;
26r. - 19 purple;
27r. - again we increase the number of details: we put on one origami triangle from the previous row two elements each.

The row consists of 38 white parts.
28r. - 38 purple triangles are dressed with an inclination forward;

29r. - repetition of row No. 28;
30 rub. - We dress 38 white origami triangles with an inclination forward.
A vase of paper triangles is ready!

How are schemas assembled?

Parts (modules) assembled according to a certain scheme are not difficult in themselves. But the figures of them require patience. For large-scale crafts, sometimes a huge amount of these parts is required.

As for the question of how to make simple modular origami, vase patterns, for example, or a swan, these crafts serve as the "base" of learning.

The rules for constructing any object in modular origami are simple. The first row of modules integrates and holds the second row, which overlaps on top of the bottom row. And the third row holds the second, and serves as the basis for 4 - and so on.

It is only necessary to add the multi-colored elements in the correct sequence. If you violate the order of the colored elements, the pattern laid down in the scheme will go astray. Simple drawings are visible visually, and if desired, you can not go astray. But more complex drawings require special care.

How to make corner modules?

Acquaintance with modular origami begins with the construction of elementary particles of this world - from modules. Before analyzing in detail how a vase is made up of modules, you still need to learn how to make modules, and know how they are connected to each other.

Divide the A4 sheet into equal rectangles, cut them out. Each rectangle is folded in half twice. We bend the corners along the second deflection, lift the remaining squares at the bottom up. Bend the resulting triangle in half. This detail will serve for crafts.

Simple vase with diagonal stripes of modules

We assemble a simple vase, placing the necessary modules in turn one by one in a checkerboard pattern according to a simple scheme. Two details of the first row and one detail of the second; two second row - one third. So we go through 3 rows.

But first, let's explain one subtle rule. The bottom of the vase is thinner, then the craft expands in volume. And to expand this craft, you need to increase the number of modules in the circle. To do this, on each tooth of the previous row, we impose 1 module of the next row, only the next 3 modules should be set according to the basic rule. After all, the figure must hold tight. And so we alternate the modules starting from the 4th row.

Already from the 3rd row, you need to add 2 parts of a different color to create a diagonal pattern. After each row, it is necessary to bend the folded elements in the right direction. Thus, the diameter of the vase first expands, then, in the same sequence and with the same pattern, gradually decreases..

And when the top of the vase is as thin as the bottom, you can make beautiful triangular posts to raise the vase a little more in length. In total, it is required to prepare 392 modules of one color and 296 of another.

The result is a vase with diagonal stripes along. This is very interesting scheme for newbies.

Modular origami vase: craft scheme

Complex drawings require special care from a person. Tip for beginners - do not forget to recalculate the modules in each row.

Modular origami (vases), the assembly schemes of which are complicated by various decorative elements, must be assembled while watching the master class. However, you can rely on the graphic scheme. Let's take an example.

Knowing how the elements are attached to each other, you can safely take on the assembly of simple-shaped vases according to similar schemes. For convenience, we also give a scheme for counting modules.

It is impossible to visually follow the design in the process without getting lost. Especially when a person takes on the design for the first time. Definitely needs verification.

Vase with a complicated shape and pattern

A more beautiful vase in the form of a lotus is assembled according to a different scheme. Let's analyze some of the nuances of the assembly.

Modular origami (vase patterns) is characterized by the fact that all the drawings are symmetrical. White and yellow parts in each row add up an equal amount. The trick of this scheme is that the patterns in the form of petals are made, as it were, in separate windows. They are built according to the principle: 9 triangles - one side of the petal, and 9 - the other. At the bottom and at the top they are held by common units. All other stages are already familiar, we will not dwell on them. And the number of elements can be calculated based on the height of the craft, and build your own scheme. You can train further and try to make alternative schemes, relying on your imagination.

Origami crafts of varying complexity

The rest of the crafts are made according to the same principle as shown in the example of the previous schemes. When the usual schemes have been mastered, you can take up the manufacture of openwork models, dotted with various small decorations from multi-colored patterns. In complex handicrafts, there are such elements as carved "windows", columns. At the same time, it is important not to go astray in counting the modules used in each row..

This is how the modular origami "vase" looks like, the scheme of which is much more complicated than the schemes in the form of an elementary "cocoon". But the craft is more interesting and colorful.

This art knows no limits, and all schemes are dynamic. If you want to build a larger modular origami, the scheme of the large vase will be the same, only you need to create twice as many elements. And folding a large vase also takes twice as long. In fact, in order to build a large modular origami, vase diagrams need to be scaled.

Origami Floor Vase Diagram

Let's move on to the assembly explanations very much. Here we need a cardboard skeleton that would support such a large modular origami. A floor vase (craft scheme) does not contain a limited number of elements. Origami exactly copies the scale of a real floor vase. And the number of elements is even difficult to calculate. In this case, you need to focus on your creative vision of the subject.

First you need to find the model you like, and then build on it. How would such a modular origami (vase diagram) look like? And what should be done next?

The cardboard tube must be taken as tightly as possible. Glue cardboard circles along the entire height to maintain the shape.
The bottom is also made of thick cardboard.
Build origami modules in stages from one floor to another.
Do not make a too "thick" vase for the first time.
It is desirable to write out the number of all modules in a row on paper during operation.

It is clear here: the more such cardboard floors, the higher the vase will turn out. If the "creator" is still experiencing difficulties in the method of constructing drawings in origami, then it is easier to make a plain vase, without any drawings.

After you learn how to build various modular origami (vases), the assembly schemes for these crafts will become easy fun.

Today we will tell you how to make a vase from modules. Such beautiful decoration will please the eye not only to you, but also to those close to you. Also, this craft can be easily used as an original gift.

The process of creating such an ornament may seem complicated to many, because the modular origami method is used for this. However, if you have patience, you will succeed.

It is not difficult to make a pretty vase from modules, you just need to follow the instructions exactly.

Origami paper block vase

What do you need:

Twenty-eight sheets of white and fourteen sheets of colored paper.
Glue, scissors.

Fold paper into triangles traditional way. We need to make four hundred and thirty three white and two hundred and eleven color modules.

For the third strip, take twenty white, and for the second, twenty colored blanks.

For the third, you also use twenty colored blanks.
.

For the fourth row, we already take thirty colored pieces of paper. To add ten modules, dress the first one in the same way as described above, and for the second and third, leave the adjacent pockets empty. This must be done as shown in the figure with arrows.

Attach thirty modules from the fifth to the sixteenth to the resulting crafts, to get a picture, as shown in the photographs below. To do this, use colored paper.

When you finish making the sixteenth row, we get a beautiful image, and in the seventeenth, use thirty parts from white paper.

We make the eighteenth row of thirty prepared white parts, just put them on backwards relative to the row that goes earlier.

Take forty pieces of colored paper and make the nineteenth row, distributing them evenly in the form of a circle.

Don't worry, it won't be long now.

The last row consists of forty colored modules, they must be done in this way. Insert the corner on the left into the left pocket of the second part, and insert the corner on the right between the previous rows.

You make the bottom for the vase using thirty colored modules, they are inserted into each other. Glue the resulting ring to the base of the vase.

How to make a vase - the easy way

Take A4 paper and mark it as shown in the figure, then cut along the marked lines. As a result, you should get rectangles measuring fifty-three by seventy-four millimeters.

If you divide the long side into eight parts, and the short side into four, then you will get rectangles measuring thirty-seven by fifty-three millimeters.

Fold the sheet in half along the wide side. Then bend as shown in the pictures below.

Bend the edges to the middle.

Now you flip.

Fold up the edges.

Bend the ends of the corners through a triangle and unbend.

Then again fold the edges along the lines that we have outlined. Bend up.

Bend in half.

This module will have two corners and two pockets.

Now we proceed to the description of how to make the vase itself from modules of this type.

You need to prepare the figures for this, as described above. Use white, green and yellow paper for this.

You need to make twenty pieces of white modules, the same number of yellow ones, connect them together.

As soon as the first and second rows contain four blocks, build the third. After every fourth yellow module, insert one white one so that the short side looks out.

As soon as the third row is ready, connect the ends of the rows in the form of a ring.

Turn the ring inside out so that the yellow modules are short sides on the surface.

If the ring does not hold its shape, do not despair. Holding it with your hands, you can begin to collect the fourth row. First, fix two modules on the white part with the white ends up. Then insert the three yellow parts with the short sides up. You keep going like this.

You begin to make the fifth row by attaching two green parts to two white modules, then two yellow ones. Continue also.

When creating the sixth row, use one white module, two green and one yellow. The sequence of actions is the same as when creating the fifth row.

Similarly, you make the seventh row, using all three colors of the blocks according to the scheme: white, green, yellow, green, white.

Eighth row - two green, three white.

The ninth is green, four are white - our bottom will come out of it. Give it a circle shape.

Now you need to connect these green parts and insert two of their corners into each other's pockets. Such blanks need to be made four green and four white.

Put the resulting blanks on the bottom of the future vase so that the short sides stick out. You connect the green blanks with the modules that are in the ninth row. Whites are placed by white modules, which are located in the middle.

Between them, you make a connection in the form of an arch by putting five modules on the posts, and then gradually build up the structure. You need to make eight arches, this will require forty white blanks.

Wrap the vase in rows of green.

Vase with fuchsias

First, let's make the fuchsias themselves.

It is necessary to make three modules of pink paper, they are called "Shamrock". Mosaic and appliqué are usually made from such blanks.

To do this, we will only need paper of the color we need, in our case pink.

Cut a square out of it, then lay it on the table with the colored side down. Bend the square diagonally and unbend. Fold the edges inwards. In the same way, bend the side corners in the middle.

Then bend the corners inward. Unfold the left corner and bend the protruding part of the side. However, everything is clearly shown in the figure.

Having set the corner inward, bend the left on the left side, do the same with the right.

Turn the product one hundred and eighty degrees and bend the corners down. You flip again.

Fold the edges in the middle, the layer at the back will come up.

Now let's make our flower.

Combine three prepared figures into a flower that looks like a snowdrop.

Using a thin flexible wire, make pistils and stamens for the flower. To do this, cut the wire into segments eleven to thirteen centimeters long. Wrap these pieces with thin paper and bend the end. Glue the tip of the paper to the paper base.

Attach the flower itself down, glue strips of green paper to the base.

Now, using a thicker wire, make a stem for a flower and attach flowers and leaves to it.

Having shown imagination, you can make a two-color flower, for this you fold the trefoil from paper of different colors. When you collect, these blocks are put on each other.

Let's start creating a vase.

To do this, you need to prepare modules of white, blue and pink colors.

There must be fifty-four of them in order to make the first three rows. Arrange them long sides up, thus preparing the first two rows. The third row is created in the same way, only with the short sides down.

Connect all three rows with opposite ends in the form of rings.

Turn the craft over and put the following blanks up with the long sides. You will need to make three rows of eighteen modules.

Increase the number of blanks by six pieces in the seventh layer by connecting not one, but two blanks.

Starting from the eighth row and ending with the fifteenth, attach twenty-four blanks to each, while creating a pattern to your liking.

Attach twenty-four modules to the sixteenth row outward with the short side. This will serve as the base for the vase, so give it a circle shape.
Connect together all six resulting blanks. by inserting the corners of one blank into the pockets of another.

Put these posts on the bottom of the prepared bottom. The short sides should face out.

For each column, put on two cooked products.

We complete the work by putting twenty-four blanks on three layers of crafts. Choose colors according to your taste.

With my own hands. The two-tone palette makes for an interesting combination. This is an unusual craft that can be made from paper of all colors.
Required details to create:

Paper triangles for origami purple and white;
Glue gel or glue gun.

Stages of work:

We start the assembly with purple triples, which we place as illustrated in the photo:

In total, you need to make 14 triplets. We close the blanks in a circle. We collect two more circular rows of purple triangles, 28 parts in each row. The result is the following:

4r. - assembly is carried out with white triangles. In the current row, you need to increase the number of modules to 35. To do this, for every fourth origami triangle from the previous row, you need to string not 1, but 2 elements at once

5r. - 35 purple triangles;
6r. - alternation of elements according to the scheme: 1 origami triangle white, 4 purple

7r. - in this row, you need to increase the number of components to 42. To do this, we assemble as follows:
We string 2 paper triangles of white color on the white element of the previous row, then 1 purple, then 2 purple on one triangle of the previous row

and purple again, dress as usual.
Further, the combination is repeated until the end of the row.
8r. - alternation of elements: 3 white, 3 purple modules;

9r. - alternation: 4 white, 2 purple elements;

10 rub. - alternation: 1 white triangle is inserted between the two purple of the previous row, then - 1 purple, 3 white, 1 purple;
11r. - alternation of elements according to the scheme: 1 purple, 2 white;

12 rubles - alternation: insert 1 purple origami triangle between the two white ones of the previous row, then - 1 white one;

13r. - alternation of elements: 2 purple, 1 white;

14r. - alternation: 1 purple, 1 white, 3 purple, 1 white;

15 rubles - alternation: 2 white, 4 purple triangles;

16r. - alternation: 1 white, 5 purple;

17r. - 42 purple components;
18r. - 42 white triangles;
19r. - in this row, you need to reduce the number of elements to 28. To do this, we put 1 white on 3 corners of the modules of the previous row (1.5 modules).

Here is the end result:

In this row, you can fix the triangles with adhesive so that they do not move as a result of subsequent assembly.
20 rub. - 28 purple origami triangles. Starting from this row, we put on each triangular module, slightly lifting it and feeding it forward.
21r. - alternation: 1 white, 1 purple element;