How to cut home slippers. We sew warm slippers. Pattern of slippers in natural size. What can slippers be made of

Hello, my dear seamstresses)) Today I will share my experience and pattern of children's slippers. As always, I catch myself thinking that I can’t just go and buy slippers for my child, because it’s so simple ... But I can’t do it inside)))), I really want them sew with your own hands, moreover, as a rule, this kind of thing is sewn from applied materials, that is, from what remains in small cuts in the bins.

Can sew slippers from old jeans, sheepskin coats, furs, fleece, etc.

I am for these children's slippers chose the following materials:

jeans - on the sole
fleece - on the upper and inner part of the sneaker
synthetic winterizer - for insulation

In terms of warmth, these slippers can be compared with slippers made of sheep's wool.

Pattern of slippers on the leg 16.5; 18.5; 19.5 cm

On the Internet, I got this good pattern:

But it didn’t fit me perfectly, so I made another pattern based on this pattern for the size of the slipper I needed - 18.5 cm. pattern slippers will turn out perfect.

In order to understand what size of slippers you need - put the child's foot on a piece of paper, circle it, and measure the extreme points with a ruler. Slippers can be made 0.5 - 1 cm larger than the size of the child's feet.

How to sew slippers with your own hands?

First, let's figure out what these slippers consist of? I need three layers of fabric for the upper part of the slippers - this is the outer fabric, the synthetic winterizer filler, and the inner fabric. We cut out the detail of the upper part from the blue fleece, the detail of the inner part from the black fleece, as well as the detail from the padding polyester. In total, 6 parts should be prepared for two slippers:

The sole of the slippers also consists of three parts:

from old jeans we cut out the part that will be in contact with the floor
synthetic winterizer for insulation
black fleece detail for the inside of the slipper

Then mentally “split” the already finished slippers into two slippers: one external (made of blue fleece with a padding polyester) and the other internal (made of black fleece). First we will sew the upper slippers.

Therefore, we add to wrong side a blue fleece detail from a synthetic winterizer, and we also apply a synthetic winterizer to the detail of the sole from gins:

Then we sew the upper part along the seam on the back side of the heel:

Next step:

we pin this upper part around the entire perimeter of the sole from jeans and synthetic winterizer, joining the fabrics face to face

Then we sew on a typewriter:

And turn the finished upper part of the sneaker inside out. It is necessary to make sure that the seam is of high quality on the front side, and there is no discrepancy between the layers anywhere, so that the synthetic winterizer does not stick out.

Using the same principle, we sew the inner slippers from black fleece:

In order to carefully sew the sole to the upper part, it is necessary to baste or chop off the entire perimeter with pins, since the upper part is cut in such a way that it creates the necessary volume for the leg, but at the same time, the upper part is superimposed on the lower part with little freedom. You will feel it as you sew at this stage.

And so that the upper part does not warp relative to the sole, it’s easier to sweep, so as not to rip it later (like me)))), I’m not a fan of basting)).

Here .... so do not make my mistakes, .... we pin it off:

Now it's time to sew both slippers together. To do this, we fix them at the top point of the seam on the heel, and put the outer slipper into the inner one face to face:

Here's what should happen:

And now attention! It would be ideal to just stitch along this section, just sew three layers of fabric with one seam, but it wasn’t there ... because then the slippers can’t be turned out already ...

Therefore, we sew the open cut, but not completely, leaving room for eversion from any part.

We turn the slippers on the front side, and sew the remaining cut manually or on a typewriter.

This is such a nice result.

My child was very happy with these slippers, it was especially fun waiting for him when he came up and asked all the time: “Well? Are the slippers ready?

So give joy to your children and sew such cute DIY slippers:

If desired, they could draw on them acrylic paint some kind of muzzle on the fabric, or sew ears to slippers, or make a semblance of paws, I just didn’t have time, since my child immediately put them on and ran))).

Below, I decided to still make a small selection of funny and cute faces for children's slippers:

Everyone has their own idea of comfort, but there is one element that, like nothing else, reminds of the warmth and comfort of home. These are slippers. Graceful, wide, fluffy, felted, knitted - everyone has their own, but always the most beloved ones. How to sew slippers with your own hands? Is it difficult to make patterns? We will dedicate our article to the answers to these questions.

Slippers are important!

Shoes, boots, boots - these are shoes that we select more according to aesthetic parameters, sacrificing comfort for them. But slippers should be, first of all, comfortable. But this does not mean that they will be ugly. Especially if you use our master class for creating patterns, according to which even beginners can sew slippers with their own hands.

To begin with, let's decide on the materials from which these shoes can be made. The sole is usually made from:

skin;
split leather (genuine leather without top layer);
substitute.

But it is equally important to choose the material for the insoles. It could be:

coarse cloth;
suede leather;
split.

Between the sole and the insole for durability, put a choice of:

thin synthetic winterizer;
batting;
cardboard;
foam rubber.

By adding these elements to the model, you will ensure that your slippers will last longer. So, we have decided on the technical points - it's time to add an original design idea to them.

4 patterns of cozy slippers

Craftswomen with experience say that it is better to start your own production of exclusive home shoes with felt models. This is an easily yielding material, and if somewhere it turns out not quite even cut or a seam, after the first fitting, the slippers will take the shape of the leg, so that the flaw will not be noticeable.

Patterns designed to sew slippers for adults from felt with your own hands are distinguished by one important feature: they do not need allowances, since the material tends to “adjust” to the shape of the foot. These models are usually sewn without a seal for the sole.

Materials:

a sheet of thin cardboard;
pencil;
a piece of soap;
a piece of felt;
thread, needle;
scissors;
decorative elements (beads, rhinestones, etc.).

Instruction:

If you like closed indoor shoes, then fleece slippers are what you need. True, in this case, to build a pattern, only circling the leg is not enough, measurements are needed.

Materials:

paper;
pencil;
scissors;
tape measure;
tailor's chalk;
fleece cut;
thread, needle;
sewing machine (you can do without it).

Instruction:

Read also:

furry animals

Models of house slippers-animals have gained particular popularity. At first glance, it may seem that the patterns needed to sew fur slippers with your own hands will be complicated. However, this is absolutely not the case.

Materials:

thin cardboard;
pencil;
scissors;
thread, needle;
a piece of leather or leatherette for the sole;
thin foam rubber for laying;
pieces of fur;
decorative elements (beads, pieces of colored leather).

Instruction:

We outline the foot on cardboard, cut it out - the sole is ready.
Cut out the top. To do this, draw a rectangle in which the long side is equal to the length of the foot.
On the left, on the long side, we set aside a segment equal to the desired depth of the slippers.
On the right, on the short side below, mark the height of the heel.
We connect these marks with two parallel smooth lines.
We cut out two mirror pairs of leather sole blanks, leaving a 1 cm allowance around the entire perimeter.
We make one sole from thin foam rubber, but without "surplus".
According to the pattern, we cut out 2 mirror pairs of the top of the slippers.
We sew the details.
We decorate depending on the chosen model. For a dog, for example, we make ears from pieces of fur, designate the eyes with beads, and show the nose and mouth with pieces of skin.

You can continue the theme of funny animals with a pattern of slippers with bunny ears.

Materials:

thin cardboard, pencil;
scissors;
fleece or tight knitwear;
felt or leather for the sole;
thread, needle.

Instruction:

Slippers are comfortable house shoes. Unfortunately, store options very often do not satisfy their functionality and convenience. Therefore, you have to take this matter into your own hands and make your own slippers. In addition, do-it-yourself slippers can be made as a special gift to someone, although the thing is outstanding, but the “warmth” of your hands is invested in it, which may be more pleasant than an ordinary store product.
How to make slippers with your own hands, we will tell you in this article, while offering you several options. Choose which one is right for you.

Slippers "Lasso Slippers" by Gaspard Tiné-Berès

To create slippers, you will need a piece of soft felt and a long cord.

The first step is to make a pattern from a piece of felt. You make the base according to the size of the foot, the height of the sides of the slippers to your taste - 6-7 cm or more or less.

Then cut out the instep of the foot. It is probably worth first doing the pattern operation on the auxiliary material, and when it suits you, already cut out the felt. Well, then, just tie the parts of the slippers with a lace.

That's all.

Hand knitted slippers

You will need perforated insoles, a piece of fabric, a hook and threads.

The insoles are applied to the fabric, and we cut out the inside.

We sweep the fabric with the insole.

We knit details of slippers. Five air loops are cast on, and then adjusted in size.

The front of the slippers are decorated with knitted bows.

The edging is knitted ...

... and the back of the slippers.

Sew the front of the slippers to the sides.

All is ready.

Slippers "Sunflower" do it yourself

As you understand, for such bright slippers you will need felt of different colors. Prepare it. We take measurements from the leg and make a pattern.

Green felt goes to the manufacture of the sole, heel, front. Yellow felt goes to the sole and to make a sunflower. Brown felt, also used to make a sunflower. Then we sew the apron and back to the sole with a welt stitch. The green sole and the yellow one are also stitched together or glued.
How to make a sunflower is probably not worth telling. It's pretty obvious.

As you can see, unusual bright slippers turned out.

Slippers "Flower ornament" do it yourself

We take measurements from the leg and make a pattern.

Yellow felt is used to make the sole and forefoot. Cut out the soles of slippers from brown felt. Sew the front part to the brown sole. Then the yellow part of the sole is sewn or glued. And the final touch is sewing on the braid. Choose your own ornament.

DIY slippers "Roses"

Pink fleece, pink lining, white felt, half a centimeter wide satin ribbons will be used. We take measurements from the leg and make this pattern.

The top of the slippers is cut out of fleece, details for the tongue are made of lining fabric. The sole and edges of the slippers are cut out of white felt. In the places of the cut, we connect the parts with a pink ribbon with horizontal stitches and sheathe the edges of the slippers both above and below. Then sew the top of the slipper satin ribbon. Glue the second layer of the sole. The top of the slippers can be decorated with some flower made of satin fabric.

Another option for homemade slippers

We prepare insoles, genuine leather, awl, threads, glue.

Having attached the insole to the skin, we cut out two leather insoles (our skin is blue)

Then we put a foam or felt insole between two leather insoles and fasten it with drops of glue. And then carefully overcast the edges of the sole.

Now we make the top of the slippers. You need to know the width of the entrance and the distance from the thumb to the entry point.

According to the made pattern, we cut out two blanks from the skin.

We overcast the edges of the upper parts as at the sole - with a single crochet.

The next step is stitching the details.

And the last stage is gluing the foam sole.

In fact, there are a lot of options for home slippers, we have given only a part of the possible options. Perhaps you will come up with something of your own or use an already existing idea, in any case, these slippers will turn out to be special, we are sure of it.

"Once in my childhood I had similar shoes with a small round heel and were also tied with threads. - Recalls Ladokhina Olga (Podolsk, Russia)- Why do I remember them? They probably liked it very much, now I can’t say for sure. And so, based on the motives and inventing something of her own, she got what she wanted. I just wanted the leather to be assembled by hand."

Master class by Olga Ladokhin " handmade leather"

Photo 1. To sew leather with my own hands, I needed: Genuine Leather several colors, an awl or a punch for leather, wool, shoe glue, hook No. 2, scissors and, most importantly, two foam-based insoles (felt insoles are also suitable, they can be bought both in the store and in other various places trade).

Photo 2. There is no need to make a pattern for the lower part, the insole will serve as a pattern. I cut out the skin along the contour of the insoles, two blanks of the lower part turned out.
Next, I turn the insoles over so that the foam remains inside and fix the leather blank on top. To prevent the insole and the leather blank from slipping, you can add a few drops of glue in the middle between them.

Photo 3. After I glued the bases together a little, I begin to gently pierce holes at an equal distance with an awl, stepping back from the edge by about 0.5 cm. Next, I take a hook and with woolen threads for knitting I tie the edge with the most in a simple way"single crochet". As a result, I got two neat details of slippers. The photo shows the bottom.

Photo 4-5. The most crucial moment in tailoring is to correctly design the pattern of the upper part of the slipper.
You need to know the main three sizes:
1. The distance from the highest point of the thumb to the highest point of entry of the foot into the slippers.
2. The width (circumference) of the entrance itself.
Or you can take the old ones and use them to design a pattern for the upper part of the slipper.

Photo 6 one consists of four parts. Then I start to prepare decorative elements of slippers.

Photo 7. Using a stencil on white leather, I cut out a camomile, and cut out the middle from a small piece of yellow leather. I lightly burn all the details of the flower over the candle so that all the edges are even and neat. I sew the chamomile, glue the middle and sew the slipper to the outer blank of the upper part. For strength, you can fix it a little with glue.

Home slippers should be comfortable, light and soft so that your feet can rest after a hard day's work.

Today, various styles of slippers do not cease to please our female eye. We cannot pass by beautiful home shoes, which are embroidered with crystal stones, embellished with sequins and rhinestones. Winter options slippers fascinate us even more: boots with ears or warm flip flops with fur. In this article we will tell you how to sew slippers according to the pattern.

Models of home shoes

Today in the shop windows we can see a huge assortment of home shoes. Modern designers annually update the range of slippers with new types and interesting colors.

Home slippers are not a cheap pleasure, so many women are interested in how to make a pattern of home slippers with their own hands and sew shoes on it. But for this you need to decide on the style of the product.

Home shoes can be divided into several types:

slippers;
slippers with a closed toe;
slippers;
home shoes 3D;
ugg slippers;
moccasins;
slippers socks.

To understand how to make a pattern of house slippers or ugg boots, slippers with a closed toe or slippers, you need to take into account a few tips:

In order not to take measurements, you can take an old slipper, put it on paper and outline the sole.
You will need an awl to sew on the edging.
As a rule, the sole is cut out of leatherette, split leather or leather.
The insole can be cut out of cloth or suede.
To sew a high-quality and durable product, you need to purchase special nylon threads.

Material for sewing home shoes

To pattern home slippers with your own hands, you need to pick up the fabric and stock up on all necessary Material for sewing home shoes should be of high quality and light, for example:

fleece;
mahr;
jeans;
wool;
plush;
suede leather;
felt.

From jeans, felt and suede, you can cut out and sew light home slippers or moccasins. Beautiful products are obtained from fleece, terry and plush. From these types of fabric you can sew any model of home shoes.

How to sew home slippers: felt pattern

To create this home shoes, you will need to make a complex pattern. You will need the following materials:

0.5 m felt;
scissors;
gypsy needle;
glue from a gun;
bright floss threads;
patch in the form of an apple;
cardboard;
pencil.

DIY slippers pattern will look like this:

Manufacturing process:

Take the cardboard and put your feet on it, using a pencil, outline the left and right feet.
Now cut out the soles with scissors and circle them on the fabric.
Cut out these elements.
Next, we need to create the upper of the shoe. To do this, we again take cardboard and draw two semicircles. The dimensions of these details depend on the completeness and length of your foot.
After that, we transfer these two details to the felt and cut them out.
You should have four patterns.
We must sew the upper part of the slipper with the sole.
This can be done with the help of floss threads.
After the two elements are sewn together, we can move on to decorating.
We must sew a colorful patch to the top of the product.
Now, according to the same pattern, we sew and decorate the second slippers.
Home shoes made of felt with bright stripes are ready!

How to sew house slippers uggs

Fleece slippers are ideal for sewing such a product. They will turn out warm, soft and will serve you for more than one year. To create a pattern of slippers-boots, you will need 1 m of fleece, 0.5 m of suede and 0.5 m of leather. It is good if these materials are matched to the tone. You will also need the following sewing supplies:

threads to match the fabric;
needle;
scissors;
glue "Moment";
centimeter;
ruler;
cardboard;
pencil;
pins.

Pattern of house slippers uggs:

Cut out cardboard rectangles 38 × 20 cm for the shaft (two parts).
We pin the patterns with pins to the fleece, circle and cut out with an allowance of 1 cm.
We cut out the insoles from suede 23 cm long.
Now we take the skin and cut out the soles of about 24 cm in length.
With the help of pins, we chop off the upper parts of the boot face to face.
Trim the seam allowances, fold the back sections of the boot and grind them down, leaving a hole in the lining through which you will turn the product inside out.
Sew the top of the boot from the foot to the top vertically.
So that the boots do not hang out and sit beautifully on the leg, we turn to the tucks. Make four notches in the places where the product is bent (in the area of the shaft) and carefully sew them, cut off the excess.
Now turn the outer part of the slipper on the front side, insert the suede insole into it and sew the hole with a blind seam.
We carefully coat the leather sole with glue and connect it with pins to the foot of the product.
We do the same with the second boot.
When all the work is ready, take the boots and fold the top of the products.
On these lapels, you can make embroidery or decorate ugg boots with ribbons.

How to sew your own slippers-socks

Building a pattern of house slippers with your own hands is a rather time-consuming and scrupulous work. To simplify the task, you can use beautiful terry socks. Thus, you can create original slippers in just 10 minutes!

For this you will need:

red terry socks;
leatherette - 0.5 m;
glue "Moment" (or glue from a gun);
decoration (bows, beads and stars);
scissors;
needle;
marker;
red threads.

Step-by-step guide on how to make slippers-socks:

The sole should be made of leatherette. To do this, place your feet on the material and use a marker to trace the outline of the feet.
Cut out the soles with scissors and glue them to the socks.
After the slippers dry, you can proceed to decorating.
Make a lapel on the workpiece.
Take slippers and side (with outside) decorate it with a striped bow, right on the lapel.
Sew beads a little lower and attach a couple of metal stars.
Thus, the second slippers should be decorated.

Based on this pattern, you can sew similar indoor shoes, but come up with other ways to decorate. It all depends on your taste and ideas!

how are the shoes decorated?

The fashion trend in 2017 was chic fur slippers and slippers with fur. The pattern of home slippers made of fur is easy: for this you can take old fur coat from a fox (nutria or rabbit) and cut out four parts according to your measurements - two semicircle tops and two insoles (the process has already been described).

Then we carefully sew the upper parts of the shoe with the lower elements using special nylon threads. From leatherette, we cut out the sole according to old slippers and glue it to the insoles.

If you want to surprise your guests, you can decorate slippers in an original way. Here everything will already depend on your imagination. You should start from the general color scheme of slippers, you do not need to glue a large number of diverse decorations on them. Everything must be tasteful. For example, after you have made a pattern of slippers, boots, decorate the product with bows. Attach embellishments to the sides of the outside of the boots. So, how else can you decorate slippers?

Elements for decorating home shoes:

tapes;
stars;
zigzag braid;
floss threads;
buttons;
stones;
embroidery;
rhinestones.

In order for the decorations to sit firmly on the product and not fall off after the first wash, they should be put on glue or sewn tightly with threads.