What can be sewn from mink hats. How to alter a mink hat. Examples of how to alter an old fur coat

A fur coat is the main attribute of any women's wardrobe. For some, it is not one, but for most it is the only and unforgettable copy. When a fur coat loses its presentable appearance, becomes very outdated or worn out in some places, then you can correct the situation - remake or alter the old fur coat. Options for new products depend on the degree of wear of the fur coat and its individual elements.

The duration of the use of a fur coat can be noticeable by the frayed sleeves, elbow bends, collar and shoulder seams, but if the product is long, then its hem can also suffer significantly.

You can recycle an old fur coat and get different things: fur hat, jacket, vest, boa, shoes (slippers for home), mittens, coats, car seat covers. All this can be altered from a worn-out fur coat by selecting the surviving parts from it.

Reworking an old mink coat

If you have an old mink coat, do not rush to sell it for next to nothing or. A good solution would be to alter the old mink coat - turn it into a modern model.

What can be done:

• You can completely change the cut of an old fur coat.
• Shorten the length, make a lighter model - a fur coat.
• Remove or modify the hood.
• If the old fur coat has become short, you can make an insert at the waist.
• You can also increase the length of the sleeves.
• Combining two types of fur will be very effective.
• For lovers of experiments, along with a change in style, you can repaint an old mink coat in a different color.

Examples of altered mink coats:

Advice. Before light patching mink coat dry cleaning is recommended to remove old stains and odors.

We remake the astrakhan fur coat

Karakul has long been a fairly popular fur. But fur coats from it are not original. Old astrakhan fur coats do not look fashionable. The solution to this may be the decision to alter the old astrakhan fur coat.

Alteration of an astrakhan fur coat: photos BEFORE and AFTER

A fluffy collar can be sewn to an obsolete model. Here you should carefully consider the choice of fur color.

Combination of karakul and other fur (mink and sheepskin)

The combination of fur and leather also looks good.

Converting an old fur coat into a vest

Great option to inhale new life the product will be the conversion of an old fur coat into a fur vest. The front of the work on the alteration will be as follows:

As a result of altering an old fur coat, we can get such fur vests:

Converting an old fur coat into a vest is quite simple and many can do it with their own hands.

Combination of fur and leather

Another option for reworking an old fur coat is to use fur along with another material - suede or leather. If suddenly a suede coat, as is often the case, is worn on the arms and collar, then it can be decorated with cut-off fur strips from an old fur coat. Fur also goes well with leather and thick textiles.

It is also easy to create a new product from an old fur coat and leather inserts, this is done in several stages:

1. The old product is torn apart, as in the previous case. Mezdra (the inner part of the fur) is pre-checked for holes and abrasions, they are eliminated.
2. Ribbons of different lengths are cut out of leather.
3. Leather and fur strips are sewn alternately, while observing the dimensions of the pattern.

The product obtained after alteration can be supplemented with a leather belt, but then it is necessary to provide a leather insert at the waist in advance.

It is possible to use leather strips only on certain parts of the combined fur coat: on the arms or pockets and waist.

Examples of how to alter an old fur coat:

Reworking an old sable coat

Hats

You can alter an old fur coat in fashion hats. In them, you can embody any of your fantasies or peep ideas on the Internet. Among the simplest options are:

• Fur hats for children with drawstrings- they can be seen in the winter on many children. They are beautiful and warm, it is quite possible to sew such a product with your own hands.
• Knitted hat with fur pompom- the pattern for knitting can be the most diverse, braids look great.
• Fur earmuffs. These fashion items are worn in the off-season as a light headdress. From one fur coat you can make several of these headphones, enough for the whole family. When creating them, you need to sew the fur from the wrong side, but only carefully so that the stitches are hidden in the pile.

Shoes

Soft fur coat uggs are a great solution for cold days. The bottom comes from ordinary shoes, but the top is completely made of sleeves or other parts of outerwear. You can also decorate any other street or home shoes with fur pompoms, making it original.

For those who have constantly cold feet, fur coat insoles will come in handy, which can be placed face up in winter boots or boots. They are easy to make yourself:

• take a cardboard box, the dimensions of which will be larger than the foot;
• stand on the cardboard with bare feet and circle each of them;
• put cardboard blanks on fur elements and cut them out;
• glue the fur onto the cardboard with glue.

Mittens

To make them, you need to draw special patterns according to your size and cut out fur details, which then need to be sewn. If there is enough whole fur left, then you can sew a stylish clutch.

Fur carpet

To create it, you will need several old fur coats, for example, you can use your own and a child. The size of the carpet will depend on the amount of sewing material collected; it is necessary to determine sections of fur coats without defects on the wrong side.

The process of creating a warm fur carpet will look like this:

• The fur coat is decomposed on the floor, with the help of a scalpel or a clerical knife, all unnecessary and damaged parts are removed from it.
• From the cut suitable material, squares or strips of equal length and width are cut. The pattern of these parts must be carried out along the seam so as not to damage the structure of the fur.
• Prepared fur pieces are turned face down on the floor and laid out according to the parameters of the future product.
• All connecting sides are sewn with an overcast seam, which is performed over the edge, while maintaining a uniform distance of 2-3 mm between the stitches.
• To align the seams, they are sprayed with water, and then left for 20 minutes.

Fur carpets are sewn square or rectangular, experienced craftsmen contrive to make them oval, and some manage to create entire floor paintings from small fur details.

From small pieces of fur, you can create incredible pillows, handbags and backpacks. In particular, such products will come in handy, by the way, in the winter. For them, you can use all the remaining trimmings after the manufacture of other products.

With the advent of the first cold weather, people begin to explore their own winter wardrobe. Quite often, among a huge number of unnecessary things, you can find some long-forgotten piece of clothing, for example, an old mink hat that is out of fashion or has some kind of damage. Do not rush to immediately get rid of an old mink hat. After all, as you know, mink fur remains burning already. long time, with the advent of each new season, world designers present new collections with the introduction of this valuable fur. The style of a mink hat can be changed without the help of others. Altering a mink hat with your own hands is not so difficult!

You will need

• - ancient mink hat;
• - threads and sewing needles;
• - sewing machine;
• - pattern;
• - fur.

First you need to rip open the old mink hat that you want to alter. You need to rip the headdress carefully so as not to spoil the fur. Mink fur can be somewhat deformed. It depends on what style the ancient hat was. But we'll fix it.

To return the fur to its former shape, it must be washed, then pinned to a board. After a similar procedure, mink fur will be beautiful and smooth, like new.

In advance, it is necessary to choose the style of the future hat, and also determine the pattern.

Now on the web and various magazines, a huge number of different patterns of a mink hat are offered.

Next, you need to sew tucks on both sides of the mink hat from the base of the wedges. In the process of sewing, pin and baste the details of the headdress with pins. The pins need to be driven across. A similar procedure will not give the stitched layers the ability to move. Seam allowances may not be ironed out. It is quite easy to straighten them with the help of scissor rings. Fur villi from the seams should be carefully pulled out with a needle.

Sew the hat pieces together. With all this, you need to look very closely so that the skin does not gather, also does not stretch. This point is especially important. All seams of the cap should converge in the center.

Proceed to the final step. Turn your mink hat inside out, then lay the lining in such a way that all the seams match. Sew the lining to the headpiece. You see, there is nothing particularly difficult in altering a mink hat. Just stick to the annotation and you will give a second life to your own thing.

A mink hat remains by far the most sought-after fur accessory for the winter. This precious fur has been chosen by more than one generation of women who prefer beauty, warmth and exclusivity.

Always in fashion

A few years ago, mink hats were produced in one shape and color. But even then, hats were in great demand among different segments of the population. The only negative of those hats was that they were intended for women of a certain age group. Today, this situation has changed radically. Mink hat is released different styles and shades. Now women of any age can appreciate all the charms of this accessory.

DIY fashion

Not many thought that a headdress can be made by hand. It is worth considering step by step instructions on how to make a mink hat at home. The master class is designed for any fashionista. To make a product with your own hands, you do not need to be a tailor or designer. For people who cannot afford an expensive wardrobe item, we suggest using our instructions:

Right choice

If you are not considering the option of making a hat with your own hands, then in order to make a good purchase, you need to learn a few nuances for right choice. In the age of high technology, buying a hat can be done in two ways: buy it in a fur salon or order it in an online store. It is worth mentioning right away that a headdress must be measured before buying. Therefore, we will consider only the first method of purchase. To choose a quality product, you need to evaluate its appearance. A mink hat should be well-tailored. If the accessory was sewn from separate pieces of fur, then they must be well fastened. A good hat should have a quality lining, from which the threads do not stick out. Particular attention should be paid to the fur itself. It should be smooth, without creases and dents, and have thick undercoats. It should not crumble, otherwise it will shrink in such a product as a mink hat. The female head in this case will be decorated with a quality accessory. Be sure to pay attention to the style. The hat should be a woman's face. Huge selection colors and styles will adorn even the most demanding customer.

How to store and care

If we turn to statistics, we can safely say that with proper care and storage, a mink hat can last an average of 15 years. Therefore, as soon as the winter season has passed, the hat must be put away for storage. But for this it is prepared according to the following algorithm:

• clean fur;
• dry it in the open air.

And then you can put away for storage. If financial possibilities allow, then you can give the headdress to a special refrigerator. There fur kept at the right temperature and humidity. If you prefer to store the product at home, then we allocate a separate box for the hat, which will protect its shape and color from fading. In the off-season, you need to ventilate the hat. You can put a special protective

Conclusion

In our article, we have given tips on the care and storage of such a wardrobe item as a mink hat. The female head should be warm in cold winter days Therefore, this product should be in the wardrobe of every fashionista. For women who love to make exclusive things with their own hands, we have provided a unique master class on making mink hats.

In this article, we offer you a master class and ideas on how to turn an old mink hat into a fashion accessory.

Fur hats adorn the peaks of winter fashion for more than one season. But not every girl can afford to buy a stylish accessory. But in almost every house there is an old mink hat, or even several. And you can alter the old mink hat so as to change it beyond recognition, or simply modify it, make it more comfortable.

Before altering an old mink hat, check the mezra: tips

Important: Be sure to inspect the mezdra and the fur itself before starting the work! The pile should not crumble, and the mezra should be dense and moderately hard, but not overdried by time! If the product is already crumbling at the stage of disassembly, then when sewing, the mezra may even crack.

1. To alter an old mink hat, you need it completely or partially disassemble. In any case, even if the changes are minor, we will definitely change the lining! To do this, we carefully evaporate the old base and peel it off the fur.
2. If a lot of gelatin was used when gluing, then Wet the inside of the hat well. Don't wet the fur! And gently tear off the core from the base.
3. When you have taken apart the hat, be sure to inspect the leather part! The old mezdra can deteriorate, especially if there was a bad dressing. In this case, acid begins to accumulate, which literally corrodes the mezdra.
4. To do this, wet the mezra and pull it a little. It should become plastic and not tear.
5. If you are working with pieces, then cut off all irregularities. You can just test them for strength - lower the fur trimmings into the water for 10-15 minutes. Bad fur will literally begin to disintegrate in the hands. It is impossible to work with such fur! The product, if not during sewing, then during wear will crumble.
6. Ideally, reinforce all punctured or worn areas. You can use special glue and a thin cloth. But proved to be the strongest Moment glue and spunbond(used in furniture production). We cut strips 1 cm wide, grease with glue, apply glue to the leather base.

How to change a hard mink hat into a soft one?

We will start with this master class on how to alter a mink hat. After all, earlier hats were hard and kept their shape well. Because we tried to gelatinize the base as best as possible. Today, not only the fashion has changed, but also such accessories turned out to be not very convenient, because they often press on. Therefore, we will begin our analysis with how to disassemble the hat and make it more comfortable without much changing the appearance.

• First of all, we rip off the lining.

• Now just a little tip - if you see inside hand stitches, that's a good sign. This means that the felt cap was dry when the hide was pulled on. This means that it will be easier to remove. If the felt were wet, then the bonding with the core would be stronger.

• But in order for the headdress to keep its shape, it is worth leaving the upper part of the cap. To do this, cut it out at the most protruding points.

• We insert it into our hat, fasten it with pins in the center, turn the product inside out. Now we sew with manual ordinary stitches in a circle the fert itself to the mezdra and along the ledge. Make sure that the stitches on the fur side are small and do not touch the pile itself.

• We outline the line of the future new hem. In this case, the fastening tape is light. Therefore, so that it is not visible, and a new one is not sewn on, we simply change the hem line.

• To insulate and give some volume, we will insert batting. We take measurements on the cap for right size. We have it asymmetrical, so we measure it from all sides.

• Cut the batting to the desired size. To make the bottom of the hat a little thicker, insert a strip of drape - 4 cm around the circumference of your head. Sew directly to the fur part. From the side of the pile, the stitches are small.

• We fasten the batting. To do this, we lower it a little behind a strip of drape. We also sew our batting to it.

• Now we make a fold of fur. For this we use thin felt. We cut it out in a semicircle and simply, folding it to the widow, sew it to the right place.

• Now completely sew on the batting and fasten it to the top of the felt cap. Sew the fastening tape to the felt. You can optionally insert an elastic band or ribbon so that you can adjust the volume.

• Cut out the new lining. Never use old lining material! We also cut out a round base with a diameter of about 18 cm.

• We sew it, fold it on top and also pass the line. And now we need to pull off the upper part. To do this, we pierce the fabric and now we throw the material in a spiral. How to wind the fabric on the needle.

• Distribute the folds evenly. We take as a basis an ordinary jar. First we have round part, then a rectangular base. We fix everything with an elastic band or rope so that it does not fidget. And sew by hand with a regular seam.

• We insert our lining into the fur base, fasten the bottom with pins. We evenly place - the lining should be completely back to back. We fasten with pins, and then sew with a regular seam directly to the fur, capturing a millimeter of the mezra and about 0.5 cm of the lining.

Video: How to change a hard mink hat into a soft one?

How to turn an old mink hat into a trendy beret?

A beret is a symbol of femininity that can decorate almost any outfit. By the way, you may be interested in the article “Which hat to choose depending on the type and style of the jacket, coat?”. But back to our topic - it is very easy to alter an old mink hat in a beret!

In this example, two hats will be used, since the beret will be voluminous. Based on the pattern, you can roughly guess how much fur is needed. If you initially have a large hat, but want to make a small beret, then one headdress will be enough. Also, at your discretion, you can make wedges narrower, but in larger quantities.

Important: Takes on a head circumference of 56-57 cm. If you need a smaller volume, for example 52 cm, then take 9.5 cm at the widest part (indicated in green).

• We sew together all the wedges. In the example, the fur is from different hats, so the shade is slightly different. To beat this, we will alternate them with each other.

• We connect them in the center. After we sew on the sides and form the base of the beret.

• Now cut out the bottom base of the beret. In our case, there is little fur, so the strip came out thin. The bottom of the beret about 5 cm wide, folded in half, will look very nice. We sew all the pieces in one strip, focusing on the volume of the head + allowance for seams + 2 cm for the padding polyester, so that the dress fits better and more comfortably on the head.

Important: Since it takes from us from wedges, then the rim must be made from the same number of parts. At the same time, for the volume of the beret, we will pick up the fur a little, sewing it to the bottom strip. This will also help us understand how many wedges we need to collect.

• We sew a slanting inlay to the rim. You can sew on a simple sewing machine. But in this case, we place the inlay from below, and put a newspaper on top of the mezra. If the core is hard enough, then the machine can handle it.

• After we turn the inlay inside out and literally lay a line half a millimeter from the edge.

• Sew the rim of the fur to the beret. We insert a thin synthetic winterizer, batting or just a soft fabric like fleece into this rim between the oblique trim and the base. To make the cap fit better, we sew on a thin elastic band.

• We sew for the shirt at the bottom of the beret (at the junction with the rim) and for the oblique trim.

• Now we cut out the lining, it is better to take it on a synthetic winterizer. We also cut out 8 wedges + 1 cm along the edges for the seam + 3 cm down.

• Sew on a typewriter, turn inside out front side, and he takes it inside out. We put on a hat with a lining. We fasten with pins and sew well with hand stitches.

Video: How to change a mink hat into a beret?

How to alter an old mink hat into a fashionable and modern headdress: complete restoration of earflaps

Now we offer you a master class on how to alter an old mink hat, which at first glance cannot be restored at all. But we assure you that the result will give you the opportunity to believe - nothing is impossible! Especially in the fur business.

• Let's start cutting out the lining. At the same time, we do not unpick, namely, we cut off the fur, since the appearance at the seams can no longer be restored.

• Now we need to check each skin! To do this, simply sprinkle it with water in some places.

Checking

• We wait 10-15 minutes. Gently stretch the core.

• Now we need to refresh the color. To do this, take the usual hair dye. Ideally, take chocolate, mix it with 1 part dark brown or half black.

• We carefully paint over the pile and comb it with an animal comb in different directions.

• Rinse well until the water runs clear. It does not hurt to use the balm that comes with the paint. Also rinse well. Dip with a towel to remove excess moisture.

• Now we will stretch the skins. To do this, we nail on a wooden surface with small carnations or staples of a furniture stapler around the perimeter. On the right side, do what feels right for you. If you place the fur on top, you can comb it periodically, which will speed up drying.

• We cut off any irregularities at the edges or damaged fur.

• We cut strips of about 0.8-1 cm. Please note that this should be done on weight. And for convenience, so as not to get confused in the stripes, do not cut literally 0.5-1 cm to the edge.

• You can use another model of your choice. We begin to wrap the facial lines on the cap. Please note that we cut off bald patches or damaged fur. We do not sew yet, but we hide the tips inward, on the wrong side. We will sew them at the end, and not only among themselves, but also sew them directly to the base of the cap.

A detailed master class on creating a hat from strips of fur in our article

• We will make the top of the head from another fur. We also cut it into strips. In this example, silver fox will be used. If you have beautiful whole fur, then you can simply sew on a piece of the right size. At the bottom you need to insert a hat elastic. Just pull it through the knitted base, and not just through the fur.

How to alter an old mink hat: ideas, before and after photos

We bring to your attention a few ideas on how to alter an old mink hat.

Different colors

Video: How to alter an old mink hat by knitting from stripes?

In the closet of each of us there is, if not a couple of skeletons, then certainly a certain amount of clothes that you will never wear and it is a pity to throw it away. Oddly enough, sweaters take the palm in the ranking of unnecessary / unfashionable / moth-eaten things. If you also found such a character on the mezzanine or in the depths of the wardrobe, but for sentimental reasons you cannot send him to the trash can, give things a second chance. Turn an old sweater into a cute trendy hat.

Actual beanie hat, made by own hands, can become a favorite accessory this spring. Or a nice gift for girlfriends on March 8th. If you have enough sweaters and an hour of free time. By the way, the ability to hold a needle and thread in your hands is not required at all in this case. And here, what you need, so this:

1. An old sweater (preferably with an elastic band at the bottom);
2.Glue gun;
3. Measuring tape or tape measure;
4. A scarf for visual measurement (although a “centimeter” can be used for the same purpose);
5.Sharp scissors;
6. Marker or chalk.

1. Tie a scarf around your head, fix so that it is comfortable: not tight, but not too loose.

2. Remove the scarf without untying it and attach it to the elastic band/edge of the sweater. The length of the scarf from hem to knot will be the width of your hat.

3. Attach a measuring tape to the middle of the scarf and measure the height of the future hat. Rely on your taste or take measurements from your favorite hat of a similar design. The average height of beanie hats is in the range of 24-29 cm.

4. Draw the shape of the future accessory. Do not be afraid to stain the fabric with a marker - as a result, the measurements will not be noticeable at all.

5. And now - cut. The main thing is to grab both layers of tissue at the same time. Because scissors must be really well sharpened.

6. After the two halves are ready, take the glue gun and connect them, gluing along the very edge, as shown in the photo. Do not forget to leave the bottom unglued, otherwise you will not be able to put on the hat.

7. After the hat has already begun to resemble a hat, it's time to take up the scissors again and trim its top a little. This step is necessary so that the beanie sits better, and does not resemble a familiar to many from the time happy childhood"cockerel".

8. Fold the hat, as in the photo below, and glue the edges of the formed “eight”.