Do-it-yourself bear costume: sewing method, patterns and recommendations. DIY bear costume: sewing method, patterns and recommendations Children's carnival costumes patterns of bear caps

I'm sitting, sewing a New Year's costume for the younger, in Kindergarten on the tree Parents were given a task: girls - snowflakes, boys - forest animals. I decided that there would definitely be bunnies for sure, it means that we should be a bear (the wolf, fox and hedgehog somehow didn’t look to me). Thinking that I don’t want a suit in the usual sense (a satin or fur jumpsuit or a shaggy vest), I decided to sew trousers and a sweatshirt from velor (well, almost fur) and a hat-mask, especially since everything was at home and was waiting for its hours.
Based on this MK, you can sew a hat for any animal, changing only the ears and appliqué.

Well, let's start.
We will need - elastic material for the hat (to better fit on the child's head), felt and a sewing machine.

I took the hat pattern from the free Ottobre magazine, I just removed the extra seams. I drew the muzzle of the bear I needed and made its pattern.

1. We cut the hat, I made one seam at the back of the head and tucks, the rest was closed. We cut out 2 details of the cap (if the lining is made of the same material) and details of the muzzle from felt and ears (details of the ears from felt cut without seam allowances). I grind a tuck on the forehead on the top part of the hat (not on the lining).

2. I sew the details of the ears, placing a little velor on their round part, in order to turn them inside out, a dark edging forms on the front side. I put the finished ears to the right and left tucks and grab them by the very cut of the seam of the cap, so that there is a general impression of the muzzle.

3. I attach the nose and pupils to the muzzle blank and place it in the right place on the forehead near the cap. I sew with a regular line on a typewriter.

4. Next, I mark the places of the seams on the muzzle and sew with contrasting threads. I embroider highlights in the eyes and dots on the cheeks with French knots.
Well, you can already see what we can do.

5. I stitch the top of the cap and the lining along the line of the face, then I sew up all the tucks, including those on the lining. Lastly, I grind the seam at the back of the head, leaving 7-8 cm unsewn in the lining in order to turn the hat on the right side.

13.02.2017

Moms dress their children with cute animals for the holidays. The image of a teddy bear for a boy is more than ever welcome.

Today's master class is devoted to the question: how to sew a bear costume with your own hands for a boy.

DIY bear costume for a boy: materials and tools

The fabric from which the suit is sewn should be breathable, and if it is faux fur, then the knitting should be loose and loose. This is in case you want to sew a suit out of an old thick plaid that looks exactly like a bear skin. If the material is too dense, the child will sweat quickly. In this state, the baby will not want to have fun at the holiday. For the same reason, this master class offers a separate version of the suit, where the vest and pants are sewn separately.

For sewing, you will need the following materials and tools:

Upper or facial tissue brown or beige colour terry or fleecy (the length of the pile does not matter);

The lower or inner fabric does not matter what color, the main thing is that it would be made of natural material(linen, poplin, satin, cotton);

Plastic eyes and nose to represent a muzzle or ear rim;

Strong threads, scissors, measuring tape, sewing machine.

If you have a plain natural dense fabric or satin, then the bottom or inner fabric is not needed.

DIY bear costume for a boy: a separate costume

For this costume, you will need to sew a vest, shorts or pants and a hat or ears on the headband. Boots and mittens are sewn at will. A child without them will look like a bear. At the request of the parents, the image can be supplemented with little things.

So, for example: a vest can be sewn both with ties and one-piece, with a bow around the neck and a fabric of a different color on the chest and stomach.

Option 1

Here is a solution for making a costume can be offered from brown satin fabric.

For this product you will need a piece of fleece fabric, satin fabric, a red bow or fabric on a bow, and a wide elastic band.

Stage 1

Before drawing the pattern, measure your child with a measuring tape. You will need to know the height of the jacket (from shoulder to hip), sleeve length, arm circumference, collar circumference, shoulder width (from collar to shoulder angle), chest circumference. For pants: thigh circumference, leg length from the waist to the ankle (if these are shorts, then to the knee), the length of the inside of the leg (from the groin to the ankle), leg circumference.

Stage 2

Measure the fabric, draw the details and cut them out of the fabric. You should get: two parts of the jacket (front and back), two parts of the sleeve, two parts of the pants. Note that the front of the sweater should be cut out of the fleece fabric.

This pattern of pants is the easiest and fastest.

Stage 3

Sew together the front and back of the jacket. Sew the sleeves into the arm holes.

Sew the details of the pants together along the upper side cuts. Scroll the product so that the seam lies between the parts, and the two parts lie on the sides of the seam folded in half. In this position, stitch each piece separately. This seam will go between the legs.

Stage 4

Tuck the cut-off part of the sleeves and the bottom of the sweater and sew, stepping back from the edge one centimeter. Fold and stitch the waistband and leg opening in the same way.

Insert a wide elastic band into the sleeves and waist on the jacket. Insert the same into the pants at the waist and legs.

Stage 5

Sew a ready-made butterfly to the neck. If you do not have a purchased butterfly, then you can make it yourself.

You will need a 20 x 20 cm square of fabric for a bow and a 5 x 10 cm strip of the same fabric. Sew together two opposite edges of a large square and turn the seam so that it lies in the middle of the resulting tube, and not on the side. Turn inside out and iron the fabric tube.

From the strip, in exactly the same way, make a small circle. Insert a large circle into a small one and stretch exactly to the middle. Butterfly is ready. You can safely sew it to the bear costume.

Option 2

For this type of costume, the vest is worn wide open.

Stage 1

Choose a fabric and apply vest details to it. If you chose a fabric with faux fur for such a suit, then a lining of faux fur is usually sewn onto its inside. natural fabric. And this means that if you sew in the lining, then the patterns must be duplicated. That is, the drawing of the details is applied both to the front fabric with artificial fur, and to the lining or inner.

For sewing, you need to get two parts of the front side and one part of the back side of the vest from the front part and exactly the same parts from the inner fabric.

Draw the outline of the details for sewing pants or shorts on the fabric.

Stage 2

Cut out the resulting parts and sew together the parts from the inner fabric and separately from the outer fabric. The vest is sewn on the shoulder and on the side.

It’s worth mentioning right away that shorts or pants are sewn according to the same principle as in the first version of the suit.

Stage 3

If you are sewing a product without a second inner layer, then turn all cut edges (sleeve, neck, hem, trouser leg and belt on pants) inward by one or two turns and sew, stepping back from the edge no more than one centimeter.

If you decide to sew a suit from two layers (inner and outer), then assemble the resulting parts together. Pants sewn from the inner fabric, fold with pants made of faux hem front side to the front. Sew along the cut edge, namely at the waist and at the legs. Do the same with the vest.

Leave a small piece (15-20cm) unstitched. Turn your pants and vest inside out through these holes. Hand-sew the unstitched section of the fabric with a blind seam.

DIY bear costume for a boy: hat or headband with ears

In order to make it clear that you have a bear in front of you, and not another animal, you need to sew a hat with the face and ears of a bear.

Stage 1

In order to sew a bear hat, you need to measure the circumference and depth of the child's head.

Stage 2

Apply a pattern of a hat, ears and muzzle to the fabric according to the following pattern.

Stage 3

Cut out the resulting parts and sew together. Pre-sewn ears are inserted into the ear holes, and the seam is stitched on a sewing machine.

Turn the bottom edge of the hat over and sew around the entire circumference.

Stage 4

Sew the muzzle onto the front of the hat, leaving a small section unsewn. Through it, push a lot of filler under the fabric and finish the left segment. These will be the cheeks of the bear. He has large ones, so the larger the shape, the better.

Sew the nose and eyes in place. The hat with the bear's face is ready.

If you don't feel like messing around with sewing a hat, you can make bear ears and attach them to the rim.

According to the scheme above, only the ears are cut out and sewn together. The bottom edge is not stitched. The ears are turned inside out and put on the rim with the lower edge. Sew up the cut edge so that the rim remains hidden inside between the fabrics.

Carnival costumes are a mandatory attribute of most children's parties, but at each of them the child may want to try new look, which is quite costly. Therefore, parents try to sew costumes on their own. For example, you can create an image of the owner of the forest - a bear - in several ways, varying in degree of complexity, but each of them perfectly conveys the intended character.

We sew a New Year's bear costume for a boy

If you know how to sew, especially working with dense and heavy fabrics, you can start making a bear costume from scratch. But this will take a lot of free time, which is usually already in short supply, so for those who need an easier way out, there are several simple express options.

Firstly, you can always use the things in the house and do their “transformation”. In particular, for the New Year's bear costume, you will need a loose jacket with a long front zipper, and it is desirable that it be with a hood. Also useful are straight wide trousers in brown or white, made of soft material (for example, fleece). The shade of the jacket does not play a special role, since it will be greatly modified. In the store, all that remains is to purchase a sufficient amount of brown or white fleece, find suitable threads and related tools - scissors, soap, pins, etc.
The dimensions of the cut of brown or white fleece are calculated in advance: the fabric should be enough to completely cover the original material of the jacket. You don’t need to build a preliminary pattern, since you already have a frame, and you just need to “wrap” it with a new layer. A jacket is laid out on a stretched and ironed fabric, first the front and back are circled along the contour, then the hood, and then attention is paid to the sleeves. All the details must be cut out, not forgetting about the increase for the seams, and carefully sewn over the sweater.
Particular attention is paid to the hood, i.e. future bear head. To arrange it properly, 4 circles with a diameter of 15 cm are cut out of brown fleece. They need to be folded together in pairs with the front sides inward, sewn so that only 2-3 cm of the edge remains intact, and turn out through this hole. These will be the bear's ears: inside they are filled with either a dense synthetic winterizer or scraps of other fabrics. In the middle on each "ear" you need to place a circle of lighter fleece, with a diameter of 7-9 cm. After that, the "ears" can be sewn to the hood, with the hole through which they were stuffed down. Additionally, from 2 small circles (diameter 6-7 cm) of black color, sewn together and also stuffed with padding polyester, a nose is obtained. Eyes can be drawn or embroidered with dark threads.
The last detail of the bear costume is mittens that will imitate his paws. The sewing technology is very simple, and even a pattern is drawn in a matter of minutes. It is enough just to circle the child’s palm along with the fingers, making a small increase so that his hand feels free inside the thing. From the same brown fleece, parts are cut out, which are again connected in pairs with the front sides, sewn together and turned inside out. On the inner sides of each mitten, you need to place smaller copies of the same pattern, made in a more light shade- these will be the "pads" on the paws. And in order to keep the mittens on children's hands, the edge is bent, turning into a drawstring, and a simple linen elastic is inserted into it.

Read also:

If you still decide to sew a children's bear costume from scratch, you will need to build a pattern. In fact, there is no single pattern for such a suit, because it can be one-piece and separate, certain details can vary in it, so choose from the existing assortment what you can do.

The general components of the image of a bear are a free top and bottom, soft slippers, paws, mittens, round ears that can “sit” on a cap or on a rim. Additional details like ears and mittens have been discussed above, and now you need to pay attention to the main things: the top and bottom of the suit. These are wide straight pants that can even be combined with slippers, and the same wide jacket, also often sewn with mittens. To complete the image, it is recommended to add to the jacket round pillow- belly to make the bear plump.

The pattern of the upper and lower parts of the suit are standard patterns of simple trousers, the legs of which can be gathered at the bottom with an elastic band, as well as a classic sweater pattern with long sleeve and with lightning. Allowances for fabric shrinkage and seams are determined based on a specific type of material: for a bear costume, it is recommended to choose soft, loose options - for example, fleece, or fabrics that imitate fur. But since the child can be hot in the latter, it is better to use them in separate areas: a hat, back, neck trim.

If you want the suit to be one-piece, be sure to insert a hidden zipper into the side seam. Putting it in the middle of the “torso” is unreasonable, since often in the abdomen there is an additional bear’s belly, which cannot be divided in half, and the expanding chest may not be enough for the baby to remove the costume painlessly.

It is possible to add volume to the bearish body not only due to the pillow: in a one-piece suit made of trousers and a sweater, a whalebone or other rigid corset-type frame connected in a circle is inserted into the junction (often close to the hip bones). But such technology is more suitable for a suit for a boy of 8-10 years old: it will be inconvenient for a preschooler to move around in such clothes.

An interesting express method for creating a polar bear costume is suitable for parents of kids of 2 years old. To bring it to life, you need a large toy polar bear, equal in height to your child. Carefully, several seams open at the toy: the one that connects the head and torso, and the middle or lateral one. As soon as the bear can be “opened”, all stuffing material is removed from it, and the toy is stretched by hand.

Since such products are not intended to be worn on the body, care must be taken to ensure that the baby is comfortable in such a suit. Therefore, you will need a soft, but not warm (the material of the toy itself is already dense) fabric in such an amount that is enough to create a full-fledged back layer. You don’t have to worry about special care regarding cut parts or seams: the main thing is that they do not cause discomfort to the child when they are adjacent to his body.

A zipper is sewn into the side seam so that the suit is easy to put on and take off. The seam connecting the torso and head of the bear is not connected back. The free edges of the fabric must be processed to prevent them from shedding, a thin elastic band is sewn into the edge related to the head of the toy, corresponding in length to the girth of the child's head. If necessary, you can make a tightly stuffed bear belly out of 2 fleece circles connected into a round pillow with a padding polyester inside. This pillow is sewn in the center of the body from the front side, the seam is applied hidden.

Last quick option baby costume the polar bear is no longer focused on reworking old things, but has a simple tailoring technology, so any mother will be able to do it. The entire costume will consist of a vest, short pants, a hat and mittens. How to build the last 3 elements was described in detail above. If you do not have the opportunity to make a full-fledged hat, you can do with simple round ears stuffed with batting and attached to a plastic rim, which must be covered with the appropriate fabric.

The vest is a traditional sleeveless jacket: a solid back, separate front halves, fastened with a button or hooks. Here it is already recommended to work with fabrics imitating fur, since fleece will not be enough, and due to the openness of the suit in the fur “shell”, the baby will not overheat. The vest has only 4 seams: 2 side seams, connecting the front halves with the back, and 2 upper ones, located on the shoulders. Additionally, the edges of the parts are processed, especially the opening for the hands and the neck. The hooks are sewn opposite each other on the front halves, from the wrong side, so that the fixation is hidden.

Of course buy fancy dress you can also in the store. The choice there is simply huge: traditional costume a bear or a hare hangs next to a robot, Zorro or Spider-Man outfit. But modern costumes are not cheap, not every family can afford such a purchase. And okay, if the suit was required only for New Year, in many kindergartens all thematic matinees are held in costume. And for children's birthdays, they are often asked to bring a child in a costume. So if you like it or not, but many mothers have to take up a needle and scissors and remember what they were taught at school in needlework lessons. But not everything is so difficult, even a novice craftswoman can sew a bear costume.

"Fast" bear costume

This costume is suitable for a matinee in the garden and can be made in just an hour. The outfit consists of ears, mittens, a ponytail and a bow around the neck, like a bear from the cartoon "Masha and the Bear". We will need a small patch of satin, brown faux fur, a thick headband and a couple of safety pins. We make a bow tie from chintz. From the fur you need to cut out the mittens, ears and tail of the bear. Then cut off a strip of material, sheathe a bezel on it, attach ears on top. You can pre-seal the ears and tail with padding polyester or cardboard. We attach the butterfly and tail to the child's clothes with safety pins. The bear costume is ready!

Carnival bear costume

It will take a little more time to sew this costume, about four hours. For him, you need to take 80-100 centimeters of faux fur, a piece of leatherette, artificial eyes from a needlework store. We measure the volume of the child's head and cut it out. We make a nose out of leatherette, ears out of fur, sew them on a hat and glue the eyes. We cut out from the shorts, vest and mittens. We sew a fur tail to the shorts, glue triangular claws cut out of leatherette on the mittens. To prevent the paws from falling off the child, you can insert an elastic band into them in a circle.

Jumpsuit with hood

Sewing such a bear costume is somewhat more difficult than the previous ones, but the result will be excellent. If you take white faux fur instead of brown, you get a polar bear costume. Most likely, the child will ask that the outfit be dressed for him not only on holidays, but also for everyday games. The basis of the costume is a jumpsuit. Patterns that match the age and size of the child can be found in needlework magazines or on the Internet. And you can lay out any jumpsuit from the baby’s wardrobe on the fur fabric and circle it, not forgetting to leave allowances for the seams. Do not worry, the fur will hide all the flaws. Mittens for this costume can not be cut out. The front of the bear costume must be fastened with a zipper, internal buttons or snaps. You need to insert elastic bands along the edge of the legs and sleeves, sew ears on the hood, and a ponytail on the ass.

Moms dress their children with cute animals for the holidays. The image of a teddy bear for a boy is more than ever welcome.

Today's master class is devoted to the question: how to sew a bear costume with your own hands for a boy.

DIY bear costume for a boy: materials and tools

For sewing, you will need the following materials and tools:

The top or front fabric is brown or beige, terry or fleecy (the length of the pile does not matter);

The bottom or inner fabric does not matter what color, the main thing is that it be made of natural material (linen, poplin, satin, cotton);

Plastic eyes and nose to represent a muzzle or ear rim;

Strong threads, scissors, measuring tape, sewing machine.

If you have a plain natural dense fabric or satin, then the bottom or inner fabric is not needed.

DIY bear costume for a boy: a separate costume

So, for example: a vest can be sewn both with ties and one-piece, with a bow around the neck and a fabric of a different color on the chest and stomach.

Option 1

Here is a solution for making a costume can be offered from brown satin fabric.

For this product you will need a piece of fleece fabric, satin fabric, a red bow or fabric on a bow, and a wide elastic band.

Stage 1

Stage 2

This pattern of pants is the easiest and fastest.

Stage 3

Sew together the front and back of the jacket. Sew the sleeves into the arm holes.

Stage 4

Tuck the cut-off part of the sleeves and the bottom of the sweater and sew, stepping back from the edge one centimeter. Fold and stitch the waistband and leg opening in the same way.

Insert a wide elastic band into the sleeves and waist on the jacket. Insert the same into the pants at the waist and legs.

Stage 5

Sew a ready-made butterfly to the neck. If you do not have a purchased butterfly, then you can make it yourself.

From the strip, in exactly the same way, make a small circle. Insert a large circle into a small one and stretch exactly to the middle. Butterfly is ready. You can safely sew it to the bear costume.

Option 2

For this type of costume, the vest is worn wide open.

Stage 1

Choose a fabric and apply vest details to it. If you chose a fabric with faux fur for such a suit, then a natural fabric lining is usually sewn on its inside. And this means that if you sew in the lining, then the patterns must be duplicated. That is, the drawing of the details is applied both to the front fabric with artificial fur, and to the lining or inner.

For sewing, you need to get two parts of the front side and one part of the back side of the vest from the front part and exactly the same parts from the inner fabric.

Draw the outline of the details for sewing pants or shorts on the fabric.

Stage 2

Cut out the resulting parts and sew together the parts from the inner fabric and separately from the outer fabric. The vest is sewn on the shoulder and on the side.

It’s worth mentioning right away that shorts or pants are sewn according to the same principle as in the first version of the suit.

Stage 3

If you decide to sew a suit from two layers (inner and outer), then assemble the resulting parts together. Fold the pants sewn from the inner fabric with the pants from the artificial border right side to the front. Sew along the cut edge, namely at the waist and at the legs. Do the same with the vest.

Leave a small piece (15-20cm) unstitched. Turn your pants and vest inside out through these holes. Hand-sew the unstitched section of the fabric with a blind seam.

DIY bear costume for a boy: hat or headband with ears

In order to make it clear that you have a bear in front of you, and not another animal, you need to sew a hat with the face and ears of a bear.

Stage 1

In order to sew a bear hat, you need to measure the circumference and depth of the child's head.

Stage 2

Apply a pattern of a hat, ears and muzzle to the fabric according to the following pattern.

Stage 3

Cut out the resulting parts and sew together. Pre-sewn ears are inserted into the ear holes, and the seam is stitched on a sewing machine.

Turn the bottom edge of the hat over and sew around the entire circumference.

Stage 4

Sew the nose and eyes in place. The hat with the bear's face is ready.

If you don't feel like messing around with sewing a hat, you can make bear ears and attach them to the rim.

According to the scheme above, only the ears are cut out and sewn together. The bottom edge is not stitched. The ears are turned inside out and put on the rim with the lower edge. Sew up the cut edge so that the rim remains hidden inside between the fabrics.