Good afternoon, dear needlewomen!

Today I have prepared for you a beautiful openwork crochet pillow cover.

Probably many of you remember autumn competition and , among which were snow-white round pillows with crochet covers. These works hooked me right away and fascinated me, and I began to look for patterns for knitting covers for round pillows.

In principle, you can use the pattern for knitting any large napkin, for example, we recently had one -.

But I also liked the white-pink cushion cover, the scheme of which I present to you.

Crochet cushion cover

For such an elegant crochet pillow cover, cotton yarn or acrylic in pink melange, green and white is most likely suitable, the hook, as always, is suitable for yarn.

The crochet pattern for a round cushion cover looks like this:

How to crochet a pillow cover. Description

Crocheting a pillow cover is similar to crocheting round napkins.

We start knitting from the center and move in a circle according to the pattern.

First we knit with yarn Pink colour a flower with several rows of petals.

In the first row in a ring of 10VP we knit 6С1Н and 3 VP between them.

In the second row in each arch of the 1st row we knit 1СБН, 1С1Н, 2С2Н, 1С1Н, 1СБН. We get 6 petals.

In each even row, we knit the petals in the same way as the 2nd row, with each row increasing the number of columns according to the scheme.

We knit the last row of petals with green yarn.

When the flower is connected, we continue to crochet the pillow cover according to the green yarn pattern (17-19th rows).

Rows 20 to 27 are knitted with white yarn.

And the last rows of arches are again with pink yarn.

It is advisable to wash the finished openwork part of the cover, pull it over the pillow and dry it.

Thus, only the upper part of the cover is connected. I would leave it like this. We sew it on top of a pillow cover made of satin or other fabric.

But if you wish, you can also tie the lower part of the pillow cover and sew both parts together.

Such openwork crocheted pillow covers are always performed together with fabric covers. You can, of course, put on an openwork cover immediately directly on the pillow, if the pillowcase is made of a beautiful, matching color thick fabric, and down and feathers that can crawl out are not used as a filler.

If you liked the openwork crochet pillow cover, be sure to knit it! This pillow reminded me of one of ours, it would just be a set in the same style.

Creative success, joy and sunny mood to you!

Pillows connected with openwork squares will decorate your home and add comfort.

Roses in your hands will “bloom” quickly), as they are made of thick yarn with a thick crochet according to a very simple pattern.

Operating procedure:

The final goal of the work is a rectangular pillow with small roses - size 40 x 60 cm. The upper part of the pillowcase consists of 42 fragments, crocheted No. 3 from the remains wool yarn(white, yellow, green, blue and black). For each fragment, 10-15 g of yarn is needed, depending on its quality.

The knitting of the fragment starts from the center, with a chain of 12 air loops. They are closed with a half-column - the 1st circle turned out.

2nd circle - 4 chains of 4 air loops, fixed with half-columns on the ringlet through 2 loops of the chain.

After the 7th round, green leaves are knitted, making 4 double crochet from the top point of the rose petal and 1 air loop between them and 2 single crochet between the petals (lower point). Around the whole circle from the double crochet to the single crochet, 2 air loops are knitted.

9th circle - double crochets of black yarn.

In order for all the fragments to be the same size, the edges of the finished fragment are slightly moistened with cold water and placed on the template. It is done like this: a square of the required size is drawn on a plank and 8 small carnations are driven in at the corners of the square and in the middle of each side. The wet fragment, with a rosette up, is planted on carnations and, after it dries, is removed. Next, use the template for the next fragment.

The finished fragments are interconnected with single crochets of blue yarn: first, in strips of 6 fragments (the short side of the pillowcase) - a total of 7 strips, then they are interconnected.

The lower part of the pillowcase is best made of blue or black woolen fabric. Fill the pillow with filler, and that's it, your work is ready.

CUSHION PILLOWS "DAMOMILKS" AND "SUNFLOWERS"

Knitting pattern with daisies and sunflowers

Knitting pattern with sunflowers

Openwork pillowcases will look more spectacular if you put them on a satin pillow:

Pillow "Daisies" and a plain pillow are also connected by squares:

Colored pillow motives

Beige openwork pillow

Pillow of motifs"clover"

pillow with flowers

Very often, pillows remain from old sofas, which are a pity to throw away, but they are not very suitable for the design of the room. These pillows can be decorated and transformed with a cover. self made. Today we will talk about how to crochet a beautiful crochet pillow case yourself in an easy and simple way. With the help of a simple technique, we will not only decorate an old pillow, but also refresh the interior of the room.

Crocheting allows you to create really amazing things.

Interesting video on the topic:

We begin to knit a pillow cover with a crochet hook according to the patterns

We will need: yarn of the required color, hook number 3.

Let's look at some loops:

Stitch step - knitted like a single crochet, but from left to right.

Knob - knit 5 single crochets from the 1st loop closed together.

Working on the back and front detail

You need to dial a chain of 69 air loops (the number of loops is adjusted according to the size of the pillow).

Knit, alternating rows of double crochet and single crochet.

Total height 40 cm.

Cast on 69 air loops and knit according to the scheme.

1st p. Double crochets are knitted to the end of the row.

2nd p. Single crochet stitches are knitted.

3rd p. It knits similarly to the 1st.

4th p. It is knitted similarly to the 2nd row. All even rows are knitted in this way.

7, 9, 11, 13 rows. 7 double crochets are knitted, “bump”, 53 double crochets, again “bump” and then 7 double crochets.

15th p. 7 double crochets are knitted, “bump”, 11 double crochets, then the combination: “bump”, 2 double crochets. Repeat the combination 9 times. After that, we knit a “bump”, 11 double crochets, a “bump”, 7 double crochets.

All odd rows from 17 to 33. Work 7 double crochet, “bump”, 11 double crochet, “bump”, 29 double crochet, “bump”, 11 double crochet, “bump”, 7 double crochet.

35th p. It is knitted similarly to the 15th row.

All odd rows 37 to 43 are knitted similarly to the 7th row.

45th p. It is knitted similarly to the 5th row.

47 and 49 rows. Knit with double crochets.

Fasten and break the thread.

Sew the front and back piece, leaving one side unsewn. We tie the edges of the product next to the double crochets and " step by step". The cover is ready for use. Putting it on a pillow, you can sew up the open edge, but you can also sew on buttons and loops for easy removal and washing.

By tying the pillow case according to this scheme, you will get such a nice product as in the photo.

There are many ways to bring touching comfort to your home - pay attention to - one of these options! Try it too!

See the video for a detailed tutorial.

We create a round case with diagrams and descriptions

To do this, you will need: yarn of the desired color (or several colors), hook number 3.

Case for round pillow knitted in two pieces.

To get started, you need to attach any thin fabric to the pillow and circle it. Then cut out the resulting circle from the fabric. According to it, we will navigate with the size of the pillow.

The photo shows an example of tying fabric for a pillow cover.

And here is another usefulness in your home with your own hands: - a fun knitted accent in your kitchen!

In the provided photo, a chain of air loops is knitted from white threads, and a three-dimensional pattern is knitted with a yellow thread. Having connected a certain length, you can sew it to the fabric so as not to make a mistake with the length.

For a three-dimensional pattern, you need to dial 20 air loops from the base threads. From the threads that will be used for the volumetric pattern (yellow in the photo), knit a combination: 1 single crochet, skip 1 stitch, 5 double crochets, skip 1 loop. Repeat this combination to knit a pattern. The number of double crochets can also be adjusted.

When the first round is over, without tearing off the thread, knit the second round. You need to apply the pattern in a spiral. By sewing the coils closer to each other, a more voluminous cover is obtained. An example is in the photo below.

Knit the second side in the same way as the first side.

After finishing knitting, the sides of the pillowcase should be carefully sewn to the pillow itself. Threads for sewing should be chosen according to the color of the yarn itself. They will not be visible behind the pattern.

An example of the resulting round pillowcase can be seen in this photo.

And here are a few more options. So, for inspiration:

Thus, having studied the proposed schemes, you can knit a cover with your own hands very quickly. The accessory turns out to be original and will look beautiful in any interior. The cover will look especially elegant, the master class of which is specially laid out in a separate article at the link.

Be sure to watch this video:

Dimensions

Each cover - 30 x 30 cm

You will need

For each cover melange yarn (45% silk, 45% mohair, 10% wool; 100 m / 50 g) - 50 g each in pastel colors (= color A), green-red (color B) and blue-turquoise (= color C); hook number 4; for each cover 2 buttons with a diameter of 28 mm.

Patterns and schemes

Square

Start with a thread ring and knit acc. scheme 1–4th circular rows, while each circular row starts with the number of ch indicated on the diagram. and finish the connection. Art. or Art. s / n.

If necessary, go through the conn. Art. to the beginning of the next round.

Main pattern

Knit st. s / n in circular rows, with each circular row starting with 3 ch. instead of 1 st. s / n and finish 1 connection. Art. in the 3rd v.p. lift.

Knitting density

15 art. s / n x 8 p. = 10 x 10 cm, connected by the main pattern;
1 crocheted square = 10 x 10 cm.

Completing of the work

Two patchwork slipcovers

For each cover, knit 6 squares from each thread of three colors, while doing only the 1st-4th circular rows.

Sew the squares in any order into a rectangle of 6 rows of 3 squares, while constantly capturing only the back wall of the loop.

Now tuck the first and last rows so that there are 3 x 3 squares on the front and back sides.

Run the side seams and stitch at the incision on both sides by 6 cm.

For fasteners, make 2 chains from ch. 40 cm long. Stretch these chains along the open edges through the corners of the squares and tie them into a bow.

Cover with round motif

For the front side, start with a square of color A. To do this, knit the 1st - 5th circular rows.

Then knit with the main pattern as follows:

6th and 7th circular rows, thread color C: knit in the corners of 1 tbsp. s / n, ch 3 and 1 tbsp. s / n \u003d 8 additions in each circular row;

8-12th circular rows, thread color B: knit in the corners of 2 tbsp. s / n, ch 3 and 2 tbsp. s / n \u003d 16 additions in each circular row.

After 12 circular rows on each side there will be 45 st. s / n.

Knit the back side in the same way, only up to the 6th circular row with a thread of color A, then the 7-11th circular rows with a thread of color C and the last circular row with a thread of color B.

At the same time, skip for the cut in the 8th circular row on one side between the corners the average 25 tbsp. s / n, linking 25 v.p. In the next circular row, ch. tie st again. s / n.

The upper edge of the incision (the initial row from the ce) tie st. b / n, then tie the entire incision around the connection. Art., while along the upper edge evenly make 2 loops for buttons.
To do this, skip, respectively, 4 p. And perform 8 ch.

Connect the front and back sides, inserting the hook only into the back wall of the loop.

Sew on buttons.

Photo: magazine "Diana Creative" No. 9/2015

Pillow from openwork squares crochet

original pillow, crocheted from squares with a delicate pattern, will decorate your home. She will add comfort and sophistication to him at the same time. Such pillows can be scattered on a sofa or put in a crib. They are comfortable and practical.

Difficulty level: 3 (out of 5)

The size: 34*34 cm +- 3 cm.

You will need:

Materials: 210 g cotton yarn and cushion cover. It is better to choose a shade simpler, pastel. Too bright colors will begin to irritate the eye in the second week.

Tools: crochet hook No 1.6.

Knitting technique: openwork squares and flowers

Knitting patterns

Knitting elements

We knit 18 pieces of openwork squares according to the first scheme. On one side we need 9 such squares, three in a row. Then we knit flowers. The number of colors is equal to the number of squares. We knit them according to the second scheme. In the center of the square, where there should be a small hole, we fasten the flower.

Product assembly and finishing

According to the scheme and drawing, we connect all the squares. Recall that on one side there will be 9 squares, and on the other too. On one side we leave a hole for the pillow. We stuff the pillow cover, put the pillowcase on the pillow.

Add to bookmarks: