Adding oil to the engine: when is it needed and how is it done correctly. Is it possible to add oil to diesel fuel and if so, what kind and how much? Vegetable oil for newborn skin

In this article, we will talk about the unique properties of base oils. competes with the most expensive and elite creams, yielding to them only in price :) . In addition, 100% natural oils do not contain preservatives, fragrances and other poisonous ballast components.

Vegetable oils are divided into base and essential.

base oils according to biochemical indicators similar to skin, which allows them to penetrate to the deep layers of the epidermis and deliver healing substances there. Therefore, they are also called base oils, transport or carrier oils.

They can be used as an independent cosmetic product, and as a base for mixing with essential oils and other ingredients.

Buying base oils pay attention to composition, it should not contain synthetic impurities, dyes, preservatives.

For the production of 100% pure vegetable oils, the cold pressing method is used and subsequent high-quality filtration without the use of high temperatures. This method preserves all the valuable properties of the oil and extends its shelf life.

Base oils have unique regenerating, anti-inflammatory, antioxidant properties due to their composition: saturated and unsaturated fatty acids, macro- and microelements, vitamins, phytosterols, phospholipids.

Well absorbed by the body, oils are involved in chemical processes and are a natural stimulator of the most important biochemical and physiological processes:

accelerate cellular metabolism;
improve skin nutrition;
promote the synthesis of fibrinogen and collagen;
improve the circulation of lymph and blood;
increase skin tone;
effectively cleanse the skin while nourishing it;
normalize the secretion of the sebaceous glands.

Fatty acid

The unique healing properties of many oils are due to the presence of fatty acids in their composition, which are divided into saturated and unsaturated.

With a high content of saturated acids, oils will be solid even at room temperature. The lower the acid content, the softer the oil.

Fatty unsaturated acids are of great value for the body: they are actively involved in metabolic processes, in the synthesis of prostaglandins, which regulate the production of hormones necessary for the body. The higher the content of unsaturated acids in the composition of the oil, the more liquid it is.

Oleic monounsaturated fatty acid, which is responsible for the construction of biological membranes in the human body, has especially valuable properties. Oils containing it in large quantities are easily absorbed and absorbed by the skin. Most rich in oleic acid olive oil(up to 85%).

Many unsaturated acids are not synthesized by our body and can only come from food or through the skin. They are called essential fatty acids (omega 6 and omega 3) They are vital for the health of the skin and the body as a whole. These include linoleic, linolenic, gamma-linolenic acids, as well as their derivatives.

Deficiency of essential acids leads to:

damage to the skin barrier, as a result, microorganisms, allergens, harmful substances easily penetrate into it, inflammatory reactions, skin diseases occur;
to transepidermal moisture loss;
to chronic degenerative diseases such as cancer, heart disease, hypertension and diabetes;
to deterioration of the brain.

Signs of an essential acid deficiency: peeling of the skin, feeling of dryness, increased irritability and sensitivity of the skin, itching, redness.

To permanently eliminate these unpleasant symptoms it is necessary to introduce natural fats and oils containing essential fatty acids into the diet and skin care.

The best sources of essential fatty acids oils of borage (borage), blackcurrant, aspen (evening primrose) are considered. Gamma linolenic acid found in these oils

stops,
normalizes hormone levels, reduces oily skin,
inhibits the formation of melanin, brightens the skin.

Useful for internal use:

linseed oil (the necessary daily balance of essential fatty acids is contained in one or two tablespoons). Before using the oil, be sure to read the contraindications!
Fish oil (salmon, mackerel, salmon, sardines, eel and so on),
pumpkin seeds, flaxseeds, soybeans, wheat germ, nuts.

So, let's summarize and list

oils to watch out for if you are deficient in essential fatty acids

Liquid oils:

In the following publications:

what oils are suitable for .

Check out beauty recipes!

Content

Natural essential oils have long been known for their useful properties for health and beauty, so they are often used in medicine and cosmetology. They are rarely used on their own, since a concentrated extract can cause an allergic reaction, but as part of creams and masks, they have an effective effect on the condition of the skin of the face and the whole body.

Essential oils can also be used at home, enhancing the effect of a regular cream or mask, as well as adding them to homemade cosmetics. At the same time, it is important to understand the properties of each of them and figure out which products and components they can be combined with to obtain the maximum result.

Properties

To obtain desired result from skin care at home, you need to figure out which essential oils are the most useful, and what is their effect on the epidermis. Most often, in the preparation of home cosmetics, such natural extracts are used:

Orange oil - improves skin elasticity, nourishes and moisturizes it, has an exfoliating effect, activates cell regeneration.
Rosemary - helps fight acne, blackheads, tightens pores and normalizes the sebaceous glands.
Lemon oil - evens out complexion, brightens dark spots, has a strong antiseptic and healing effect.
Tea tree - has a strong anti-inflammatory and antibacterial effect.
Patchouli is an ideal oil for tightening the skin and restoring its elasticity, it has a nourishing and moisturizing effect.
Jasmine is recommended for dry skin, has lifting properties, improves elasticity.
Sandalwood oil - revitalizes, tones and nourishes the skin, evens out complexion, smoothes wrinkles and brightens pigmentation.
Lavender is suitable for oily skin, normalizes the sebaceous glands, helps fight acne and pimples.

Whatever natural product a girl chooses to take care of her skin, it is important to buy a natural product. It is not cheap, so a fake is easy to distinguish from the original. But the result that regular use of essential oils gives is worth the cost.

How to add oils to cosmetics

If you want to enhance the effect of a cream or mask with oils, you should remember and follow a few rules. They will help protect the skin from dangerous oversaturation or an allergic reaction, and will also give the desired result. Some of these points to remember:

Do not drip essential oil into a tube of cosmetics and leave even a small amount there. To mix the cream with a natural ingredient, you need to mix them on the lid or palm in the amount required for one application.

No need to experiment and combine several essential oils with each other, except in cases where this is suggested by the recipe. This may give an unexpected unpleasant odor or effect on the skin. It is better to add one extract to a regular cream or mask, and try another one next time.
Any cosmetic products must be applied to cleansed skin in order for their effect to be effective and safe.
Each essential oil has a strong scent, so when choosing one, you need to make sure that the scent is pleasant and pleasurable. After all, after applying to the face, this fragrance will be felt for a long time on the skin.
To obtain a lasting effect, the mixture and mask must be applied regularly and for a long time. Self-care involves a certain discipline in the procedures.

It is not difficult to follow these rules, but following them will give a good effect and maximum benefit from each procedure. Properly adding essential oils to a cream or mask can be learned pretty quickly.

home remedy recipes

Homemade mask recipes often use several types of essential oils because there are usually not so many other ingredients. It is important to strictly observe all dosages in order to get the expected effect from their effects. The most popular recipes for homemade masks are:

For oily skin. To prepare the mask, you need to mix one tablespoon of blue clay with 3 drops of lemon oil. To obtain a homogeneous consistency, you can add a little water. Spread evenly on the surface of the face and leave for 15 minutes. Rinse with water and apply moisturizer.
Anti-aging mask is prepared from one teaspoon of honey, 2 drops base oil(for example, grape or apricot kernels) and 2 drops of lavender. All components are thoroughly mixed, applied to the skin with massage movements. Wash off the mask after 5 minutes.

To prepare a moisturizing summer mask, you need to grind 2-3 strawberries into a pulp and add 3 drops of orange oil. The finished mixture is applied to the skin of the face and décolleté for 15 minutes, after which it must be washed off.
To prepare a cleansing mask, you need to take one tablespoon of blue clay, two tablespoons of grapefruit juice, egg white and orange essential oil 3 drops. The mask should be left on the skin for 15 minutes, during which time it will cleanse the pores, relieve irritation and even out the complexion.
Toning and moisturizing the skin will provide a mask with oatmeal. 3 tablespoons of cereal should be steamed in 100 ml of hot milk, and when the porridge has cooled, 3 drops of mint essential oil are added to it. The mask is applied to the face for 10 minutes, then washed off in the usual way.

There are other recipes for homemade masks and creams with essential oils. You can change them periodically and try different variants to find the best product for you, focusing on the condition of the skin after each treatment. Then self-care will give not only the desired result, but also pleasure.

I want to talk about a popular, as it turned out, topic - adding oil to the fuel of a diesel car. The topic is quite popular among owners of diesel cars and is very controversial, since there are both adherents of this "life hack" and opponents.

To begin with, I learned about such a "chip" relatively recently, from one of my acquaintances, who at the gas station fiddled around the fuel tank for several minutes. To my question, what happened, he answered with a smile that he poured "100 grams of People's Commissar's..." shocked by what he heard. Filling the tank with two-stroke oil of a diesel car? What for? The last time I saw this was when dad was pouring oil into the gas tank of his JAVA. But in diesel oil? Yes, and in the tank of a modern car? Unclear! In general, I decided to look into this. I didn’t argue with a friend, but to be honest, I frankly didn’t believe what he was saying, despite the fact that an experienced minder advised him to pour two-stroke oil into diesel fuel.

So, after studying this issue, rummaging for several days on the Internet and shoveling several hundred articles, I came to the conclusion that I decided to state in this article. If you are interested, continue reading, if you are too lazy to read - see the summing up right away ...

So where do the legs come from?

A long time ago, when diesel fuel or diesel fuel was still of good quality, the paraffins contained in diesel fuel thickened at sub-zero temperatures, turning the fuel into jelly. Despite the fact that the solarium was with a snowflake "*" supposedly winter, the owners of diesel cars had quite a few problems. The paraffins settled, and the diesel fuel itself became "fat-free" or something, as a result of which the injection pump (high pressure fuel pump) suffered. Why suffered? The fact is that the lubrication of this very high-pressure fuel pump, according to the designers' idea, should be carried out by the fuel itself, which should be "fat" due to the presence of paraffins in it. However, due to sub-zero temperatures, as I said, there is a shortage of lubrication, which significantly affected the condition of the fuel pump, and led to its premature failure.

Craftsmen empirically came to the conclusion that the addition of additional lubricant to diesel fuel in the form of oil or kerosene, which had a beneficial effect on the operation of the high-pressure fuel pump and the entire engine as a whole. At the same time, or a little later, various fuel additives, "antigels" and similar preparations began to appear on the automotive chemistry market, which performed the same function. The difference was only in price ... Those who had the financial ability to buy additives began to "feed" the engine of their car, and those who did not have such an opportunity continued to pour oil into the diesel engine.

Time flew by, everything changed, generations of drivers, engines and technologies, however, despite the high-tech modern, some traditions are still relevant. Moreover, the situation is aggravated by the gas stations themselves, which, instead of adding special additives that prevent diesel fuel from thickening, simply remove a large percentage of paraffins from the fuel. As a result, they get savings and supposedly "winter diesel fuel", and drivers get a lot of problems and a faulty high-pressure fuel pump.

The lack of lubrication of the high-pressure fuel pump leads to its inevitable failure, a harbinger of which is the loud operation of this unit. Due to the high output, gaps increase in the parts of the high-pressure fuel pump, which lead to the fact that during operation the high-pressure fuel pump makes a lot of noise, which is familiar to all "dieselists".

How will the motor react?

Opponents of such "infusions" into the tank question this method of protecting the injection pump, since it is allegedly not recommended by the car manufacturer, and the compatibility of 2T oil with diesel fuel and its effect on the diesel unit have not been tested.

Argument 1st . It was for those who doubt that I specially visited several service stations, where I had a conversation with specialists who, in principle, were of the same opinion. In their opinion, two-stroke oil does not have a detrimental effect on a diesel engine, on the contrary, it makes the engine run smoother, lubricates the injection pump, prolonging its "life". Moreover, observations have shown that after adding oil to diesel fuel.

Argument 2 . One of the respondents is engaged in the repair of fuel equipment, made a generally sensational statement. He not only confirmed the fact that the addition of oil has a beneficial effect on the injection pump and the engine as a whole, but also spoke about his own tests. Empirically, he found out that high-pressure fuel pumps that “ate” diesel fuel with the addition of oil were less likely to fail.

How much and what kind of oil should be poured into diesel fuel?

The ideal ratio, according to the majority of adherents of the use of 2T oil, is the proportion: 1:100, it is precisely this “dose”, according to the owners of diesel cars, that does not violate the fuel-air mixture (fuel-air mixture) and has a beneficial effect on the condition of the engine and fuel equipment. The injection pump and the engine run smoothly, without loss of dynamics.

As for the brand, there is no definite opinion here, the main thing is that it be 2T oil, preferably not cheap. Also, according to the observations of some members of the forum, it is better to pour semi-synthetic oil into diesel fuel, as it has similar tolerances and standards " low smoke"(The translation will be something like: little smoke or faint smoke...). Due to the similar parameters of the ash content of these oils and the ash content of diesel fuel, the appearance of soot or a change in the color of the exhaust is almost impossible!

Summing up

As practice and numerous positive reviews of understanding people show, pouring 2T oil into diesel fuel is a completely working way to prevent damage to expensive fuel equipment. Using a small amount of two-stroke oil will not damage the power unit, but will only improve its condition.

Minuses . Among the disadvantages voiced by some car owners: (by about 3-5%), a slight decrease in dynamics, as well as the cost of oil and the need to constantly get your hands dirty and fiddle with pouring this oil into the tank. But it seems to me that if we compare the cost of repairs and the discomfort associated with it, then all these disadvantages just look ridiculous.

Alternative . If there is no desire to pour 2T oil, but there is a desire to keep the engine and injection pump, buy special additives in diesel fuel that will provide a similar effect, albeit at a higher price. As a result, the use of such additives will be cheaper than expensive repairs of fuel equipment and premature failure of one of its most expensive parts. As I have said more than once: "Prevention is always cheaper than repair!".

If there is no desire to mess with all this, then I recommend using the first or second method, at least in winter, when the diesel fuel becomes "dry and bland" and the fuel pump works with little or no lubrication. Such measures will ensure the correct operation of the injection pump, extend its service life, and also avoid the troubles and waste associated with repairs.

I have everything, thank you for your attention. Leave your thoughts on this in the comments, tell us which of the options you use and how you feel about adding oil to diesel fuel. Until then everyone, take care of yourself!

Hello my dear readers!

I decided to make such a page where I will add links to all my posts about the best base oils, so that all those who need such information can find everything they need right away, and not climb all over the blog looking for the right material.

To begin with, I want to give a small description of the base oils and determine their properties and applications.

From this article you will learn:

Base oils - properties and applications

Base oils are natural vegetable fats obtained from plants by hot and cold pressing, liquid extraction.

Types of base oils

Base oils are solid (butter) and consist mainly of saturated fatty acids.
Liquid (fatty), which consist for the most part of unsaturated fatty acids and due to the presence of double bonds in their molecules, they quickly oxidize, are sensitive to the action of microorganisms and heat.

Which base oils are more beneficial?

The most useful for the skin are oils obtained by cold pressing.

The oils obtained by extraction are of the lowest quality and their use in cosmetics is undesirable.

Base oils in cosmetology

Today, base oils added to cosmetics play the role of not only bases, but also biologically active components.

They not only ensure the penetration of other biologically active substances into the skin, but also affect the physiological processes in the skin.

Especially valuable in this regard are oils containing: linoleic, alpha-linolenic and gamma-linolenic (omega 3 and omega 6)

For the normal functioning of the skin, these acids must be supplied to the body in the correct ratio, in the range of 4:1-1:1.

With a lack of these acids, the skin begins to peel off, becomes dry and irritated.

The composition of base oils can also include such valuable components as carotenoids, phytosterols, squalene, tocopherol.

Main functions of base oils

Formation of the epidermal barrier (fats are necessary for the formation of the lipid layers of the stratum corneum)
Participation in the metabolism of biologically active molecules
Increasing the permeability of the stratum corneum for other active components.

In addition to the fact that they can be used as complete cosmetic products for the care of any parts of the body, given their properties, they serve as the basis for the preparation of home cosmetics and various mixtures with.

What oils are base?

Just follow them and read about the properties and applications of the base oil you need. Everything is very detailed and understandable.

Almost all motorists know that the technical condition of a car depends entirely on the quality of engine oil and the frequency of its replacement. According to the instructions, every 7-10 km the car needs it. A newly purchased car is sold with a pre-filled service center with oil, which is recommended by the manufacturer and is ideal for the power unit. At the same time, the agent of one brand at the service station is changed without preliminary flushing, since it is recommended by the vehicle manufacturer and does not cause concern. This scheme is the best for maintaining the "health" of the machine. But in practice, things look different.

Can I mix with different specifications? Can engine oil be mixed or not? Will this affect the operation of the motor? Can oils be mixed? different manufacturers? eternal questions, on which there are constant disputes among motorists.

Some believe that this is absolutely impossible to do, since the stage of washing the motor will be completely excluded. Others assure that there is nothing wrong with this, and this will not affect the operation of the motor in any way.

Both sides are right in their own way. In fact, oils can be mixed, but wisely, following certain rules. Otherwise, it is possible to harm the motor, the result will be its repair.

Can different oils be mixed? Reasons why this is allowed:

Forced need to add oil.
Lack of the desired brand of product.

Is it possible to mix oils from different manufacturers? What do experts think about it?

Mixing is allowed only for oils of the same category. That's the only way to avoid negative consequences with ICE.
Mixing is permissible only if the driver plans to drive for a short period of time.

The main point of this procedure is the formation of a new chemical composition, the effect of which is impossible to predict.

When mixing oils from different manufacturers, it should be remembered that even with a thorough removal of the oil, some part of the waste remains. The result is pairing it with a fresh lubricant that they don't have full compatibility with. Many motorists fear that such a formula will not ensure 100% engine performance.

Mixing theory

As mentioned above, the combination of different oils is possible, but only subject to certain factors that need to be treated with special attention. In order to deal with this issue in more detail, you should know what types of oils are.

Synthetic

It is an oil based on artificial chemicals.

Advantages:

low evaporation;
good fluidity at low temperatures;
in terms of viscosity, it reacts little to temperature fluctuations;
high durability;
requires fewer additives.

Mineral

Its most important component is oil. Some call this species organic.

Advantages:

Eco-friendly - Quantity chemical substances minimized.
Budget cost, which is sometimes a decisive factor when choosing.
Versatility.
Availability. Available at all auto shops.

semi-synthetic

The name itself suggests that this is a combination of the first two types of oils.

Advantages:

Low cost. The price is second only to mineral oils.
Compatible with vehicles running on any fuel.
Low evaporation.
Prevents the formation of limescale.

Allowed combinations of oils:

Mineral water with semi-synthetics. If mineral lubricant was previously used in the motor, then mixing with semi-synthetics is permissible. Synthetics with a polyalphaolefin base are also suitable. The following types of oils can also be poured into: polyester, silicone, glycol. In this case, one should take into account such a nuance as the chemical composition of the synthetic product.
Synthetics and its mixing. Is it possible to mix the oil with other oils when it comes to synthetics? Almost all today's commodity producers develop products according to European standards. This allows them to be mixed. But it is not a fact that the result will be positive. In some cases, the following troubles may occur: precipitation, foam. They are just kept to a minimum compared to other types of oils. The minimum number of flaws indicates that you have purchased a high-quality product. Before mixing oils, it must be taken into account that you must carry out the first maintenance with oil recommended by the manufacturer, flushing the systems beforehand.
Mixing synthetics and semi-synthetics. If at the time the oil level in the car fell, you had synthetics filled in and only semi-synthetic oils were available, you are saved. Tools such as 5W40 and 10W40, you can mix safely. This viscosity will range from 6W40 to 8W40. by the most the best option a combination of an existing oil with a better one is considered. In other words, semi-synthetic oils can be diluted with synthetic ones. Mixing synthetics with semi-synthetics is allowed only in critical cases.
Production of one commodity producer. According to many experts, it is possible to mix engine oils of the same brand. This statement is true, since oils from one manufacturer are very similar in chemical composition. In other words, they have the same base, and their chemical composition contains an identical set of additives. Based on this, mixing oils of the same brand is quite acceptable. In addition, motorists should be aware that sometimes there are situations when the same oil is sold under different brands.
Oils from various manufacturers. Is it possible to mix oils from different manufacturers? One of the risky mixing options, since no one guarantees 100% efficiency due to different manufacturing processes. But this does not mean that the result will immediately be negative. It happens that when combining such oils, minimal foaming and imperceptible sediment are observed. Unfortunately, this happens quite rarely.

Mixing oils 5W30 and 5W40

Oil 5W30 and 5W40 can be mixed. For example, if you have a sharp drop in the liquid level on the road and there is no stock of 5W40 synthetics, but there is a similar liquid with a similar label and markings, but from an outside manufacturer, in this case your manufacturer's 5W30 oil will help you. When adding the specified liquid to the motor, there will be no problems with the operation of the engine. The maximum that can happen is a slight decrease in viscosity. When using all-weather fluid 5W30 or 5W40, the engine starts at a temperature of 35 degrees. The result of this mixing will be small changes in the coefficient of thermal viscosity. This result is also not critical, since the negative side will be visible only when the motor is running at an elevated temperature. The driver will just have to take care of the car a little and not overload it.

It is recommended to add to the engine only the oil that was originally poured into it.
If it is possible to use this type of liquid, products of a similar brand should be used.
When buying a product, it must be taken into account that the same commodity producer is able to produce oils under different brands.

Is it possible to mix oils from different manufacturers in an emergency? Critical cases involve the use of other types of products. At the same time, it is necessary to minimize the number of loads and correct the situation as soon as possible by replacing it with the recommended oil.

Little tricks about gear lubricants

It is possible to mix gear oils or not, we will consider in more detail. This problem occurs only when the conversation is about the car engine. This rarely happens, but it happens when there is a decrease in the level of lubricant in the gearbox. The answer is quite simple: transmission fluids can be mixed, but only under the conditions specified for motor oils. They should be similar and practically identical in terms of chemical composition. Such a mixture will allow any motorist to safely drive in a gentle mode for several thousand more kilometers. After the end of the journey, the liquid will have to be drained and replaced with the one recommended by the manufacturer.

It is strictly forbidden to mix motor products and transmission products. Ignoring this recommendation will result in loss of engine performance. You will learn just a killer mixture.

In any case, for effective work the engine after mixing the oils will have to return to the oil recommended by the manufacturer. Before this, it is necessary to carry out the procedure for flushing the engine:

Drain the obsolete agent. Give the car the opportunity to stand a little, so that it merges to the maximum. If possible, tilt the vehicle alternately to both sides. Thus, more liquid will drain.
Install a new filter and fill with the manufacturer's recommended oil.
For three days, try not to overload the machine until the motor gets used to a different kind of product.
The next oil change procedure should occur after 10 thousand km.

The engine flush procedure is completed. If you doubt the cleanliness of the engine, shorten the service interval and take the car to a service station.

Consider the characteristics of motor vehicles from different manufacturers.

Castrol Magnatec 5W-40 A3/B4

Castrol oil is widely known to motorists for its high degree of reliability and quality. Most high-speed cars use this brand of oils.

When operating a car, motorists should remember that a large percentage of engine wear occurs as a result of starting it. A3/B4 oil allows you to protect it right from the start.

Simple oil, when the engine is idle, does not linger on it, thereby exposing the most important parts of the power unit. Castrol Magnatec 5W-40 A3/B4 wraps around every part of the engine, covering it with a heavy-duty oil film, which is an additional protection at the time of starting the engine. The result of use is to minimize the risk of engine wear.

Where are Castrol Magnatec 5W-40 A3/B4 oils used?

Cars running on gasoline and diesel fuel.
Engines in which the manufacturer has approved the use of this type of oil.

envelops and lingers on the smallest parts of the engine;
forms a dense oil film that allows you to protect the motor from the first to the last minute of starting, thereby reducing its wear;
when combined with synthetic technology, it protects the engine at different temperature conditions;
100% engine protection regardless of operating conditions and types of driving;
means of the specified brand are demi-season;
it cannot be faked, because the manufacturer has taken care of protection.

A distinctive feature is the glow in the ultraviolet spectrum. This development of the manufacturer allows consumers to easily distinguish the original from the fake.

"Lukoil Lux SN/CF 5W-40"

Synthetic, all season. Belongs to the premium class.

Purpose:

vehicles running on diesel fuel;
supercharged gasoline engines that are installed in cars, minibuses and trucks.

Domestic oil "Lukoil Lux SN / CF 5W-40" refers to synthetic. Judging by the reviews of motorists and tests, this is by far one of the most reliable lubricants in its price category.

It is an officially registered Russian product. Provides the maximum level of protection and meets all the necessary technical specifications.

prevents the formation of lime deposits in the cylinder and piston at high temperatures;
prevents the formation of sludge at low temperatures;
has a beneficial effect on seals;
The chemical composition of the oil makes it easier to start the engine in extreme conditions.

The formation of a protective film on the parts contributes to maximum protection when starting the motor.

Advantages of Lukoil Lux SN / CF 5W-40:

reduces fuel consumption;
minimizes the presence of noise;
is the best protection of the engine in any conditions;
prevents the formation of deposits on the motor.

Lukoil Lux API SL/CF 5W-30 oil

The main scope of application is passenger cars and light trucks, for which the use of low-viscosity lubricants is recommended. Designed for engines of Ford and Renault cars. Positive characteristics are similar to the previous brand.

Conclusion

And in conclusion, it is worth noting that the purchase of motor lubricants must be carried out in a trusted specialized store, which, at your first request, is able to provide a document guaranteeing product quality. And it is best to do this in stores at gas stations. It is unlikely that anyone will answer you for the quality of products bought on the market or just at the curb.

So, we found out if synthetic oils can be mixed. We hope you find this information useful.