Floral motifs of Irish lace crochet pattern. Noble and luxurious Irish lace - ideas and patterns. Creating a lace element
We present to your attention our next TV show from the "Made by Hands" series about knitting. The video shows models of clothes made by in the technique of stacked lace, as well as a master class on stacked lace.
In addition to the master class, we offer knitting pattern for an openwork blouse from floral elements, made in the technique of stacked lace.
Openwork blouse made of floral elements
Size: 42-44.
You will need: 370 g of "MAXI. MADAME TRICOTE" yarn (100% cotton, 565 m/100 g) and 150 g of "MAXI Metallic. MADAME TRICOTE" yarn (100% cotton, 540 m/100 g) - all white yarn ; hooks No. 1.6 and No. 2; universal fork or forks 5 cm and 7 cm wide; large white beads.
Main patterns: a ribbon made on a fork according to scheme 1; "flowers" according to scheme 2; "leaves" according to scheme 3.
Attention! The implementation of this blouse requires certain skills and accuracy.
Performance. Make a pattern for the front, back and sleeves life size. The product is made with 2 threads of yarn (1 thread of yarn with lurex and 1 thread of yarn without lurex) or 2 threads of yarn without lurex.
front-back
1. Yarn with lurex and without lurex with hooks No. 1.6 and No. 2, knit "flowers" according to cx. 2. Knit floral elements of different sizes, for this use hooks of different sizes or change the number of crochets in columns(st / n, st / 2n, st / 3n, etc.).
2. Crochet No. 1.6 to tie the "leaves" according to cx. 3, also alternating yarn with lurex and without lurex.
3. With lurex yarn in 1 thread, crochet No. 1.6 on a fork 5 cm wide, make 6 ribbons according to cx. 1 25 cm long.
Connect the ribbons to each other in two canvases (3 strips each), connecting them to each other from the wrong side of the 1st p. Art. b/n.
4. Lay out all the elements ("flowers", "leaves", ribbons) and fasten them on the pattern, sew them together from the wrong side with a needle, connecting the front and back shelves together into a single canvas, leaving room for armholes and making tucks - see pattern.
5. Lay out the "leaves" along the upper edge of the product, making a collar-stand.
1. With lurex yarn in 1 thread, crochet No. 2 on a fork 7 cm wide, make 4 ribbons 44 cm long.
Connect the tapes to each other in a circular canvas with a pattern according to cx. 5.
2. Yarn without lurex crochet No. 1.6 to tie "flowers". Sew these floral elements along the bottom edge of the product and along the entire canvas, placing them arbitrarily or according to the photo.
Perform the second sleeve in the same way.
Assembly: sew on sleeves. The gaps between some elements (where it is impossible to insert an element) are filled with a thin strong thread with beads strung on it in advance (see photo).
Tie the inner sides of the shelves with yarn without lurex in 1 thread with a crochet hook No. 1.6 with a pattern according to cx. 6, making holes for lacing.
With lurex yarn in 1 thread, crochet No. 1.6, make a cord, cm according to cx. 7 length 100. Lace both shelves on the back with a finished cord.
Decorate the ends of the cord with flowers.
Virtuoso works in the style of Irish lace cannot leave any woman indifferent. I would like to have at least one thing made in this technique. If there are crochet skills, then almost every craftswoman can create a lace product. The presented elements of Irish lace with diagrams and a description of the work on them will help to translate the conceived little thing into reality.
In the fabrics of Irish lace, patterns imitating flowers, leaves, buds, etc. slip through. Natural motifs are the main component of openwork works. Some of them you can learn how to create, relying on a master class with step-by-step instructions.
Flower in volume
The flower is considered an indispensable element of any composition of Irish lace.
To work on the product you will need:
- Yarn;
- Hook according to the size of the thread.
Seven air loops are created, closed, and then completely tied with single crochets.
The line is closed with a connecting column. Next comes a series of arches of five air loops.
The arches are tied with double crochets.
Between them, one single crochet is laid.
Knitting is turned over, and a hook is inserted into the base of the first arch. A single crochet is carried out.
On the wrong side of the work, air arches are repeated, including 4 loops each.
Arches are subject to tying with double crochets. They are interspersed with a one-time single crochet.
The item is returned to front side, where the "petals" of the flower are made by tied arches in a known way.
The flower is ready.
Using threads of different colors in your work will allow you to create two- and three-color elements, each of which will look different and not repeat the previous one.
knitted leaves
Knitting leaflets is attractive for its versatility. They can be modified at your discretion, which makes each element of Irish lace unique.
Related article: Unusual flower pots with your own hands
The following description of the work assumes the basic production of this motif. 20 air loops are dialed. From the second loop, three new ones are formed - single crochets.
The row is expanded by knitting one half-column, then 4 double crochets. "Fan" closes with a half-column.
The line ends with single crochets.
A pair of simple loops is created and the product unfolds. 9 columns are laid without a crochet.
Seven air loops follow, fixed in the fourth loop from the beginning of the chain.
The row breaks and the product is turned over to the other side: a simple loop is laid, and knitting continues in the opposite direction.
Work 3 single crochets, extend the row by 5 single crochets and continue with nine single crochets. Three air loops allow you to go to the next part of the leaf.
7 single crochets are made, an arch of eight air loops, crowned with a triple single crochet.
The remaining parts of the leaflet are formed in a similar way.
At the same time, you can adhere to the scheme, but actually create other products located in different places, arches, outlining your own motive.
Several finished leaves can exist on a common canvas separately or form a single "deciduous crown" of the conceived masterpiece.
Irish lace(or Scottish) is one of the oldest and most complex arts in the world. For beginner craftsmen, it will be quite difficult to knit a product using this technique the first time. But a person has serious motives, for example, he wants to make a special gift to his loved one with his own hands, then he will definitely succeed. In addition, on the Internet you can find patterns and patterns for crocheting Irish lace.
Irish lace (or Scottish) is one of the oldest and most complex arts in the world.
What is the essence of this knitting technique?
This needle skill is to tightly connect separately related elements into a single composition. The knitting is very dense, and the patterns are beautiful.
There is an opinion that only experienced knitters can knit Irish lace. It is impossible to agree with this, because if you correctly guide knitting patterns and do everything according to the description, it will turn out to do a wonderful job. Let at first it will be a small leaf or a snowflake, but over time, you can learn how to knit a dress or sundress with the technique of Irish lace.
This craft has classic elements:
- Bunch of grapes.
- Shamrock.
- Leaflet.
- Round leaf.
- Rose.
- openwork flower, etc.
Gallery: Irish lace (25 photos)
How to quickly knit a product using the Irish lace technique (video tutorials)
What tools need to be prepared?
- Hook. This is the main tool for such knitting. It should be selected for the threads that are used in the work.
- Threads. For such knitting technique, you need to take three types of threads in thickness. The pattern itself is knitted from a thread of medium thickness, a thin thread is taken for the mesh, and the thickest thread for the warp.
- Scissors.
- Needle (optional).
- Paper template.
Work begins with knitting those elements that will make up the finished pattern. Often beautiful patterns are obtained by simultaneously knitting a thick and medium thread together.
Tools may vary.
Each knitted element is fixed on paper template. This action should be mandatory, because, even despite the density of knitting, the element may unravel if it is not fixed.
When all the elements are done, they should be fastened with a horse mesh. Parts are placed face down on paper.
Irish lace for beginners: step by step instructions
When a person is just starting to engage in such a craft, he should start with fairly simple schemes. For example, you can tie a small flower.
When a person is just starting to engage in such a craft, he should start with fairly simple schemes.
- At hand, the master should have a rather thick elongated object. For example, you can use a pencil or a knitting needle. Thread should be wound around the object. You need to do this several times.
- After that, the resulting ring is removed from the base.
- It is necessary to knit 30 columns in it. Single crochets are made.
- To knit a bourdon, a thick thread is needed, but if it is not there, then the usual thread should be folded. It is imperative to think over the supply of thread, because if it is not enough, it will be difficult to fix the product in order to finish working on it later.
- Then the flower petal is knitted. To do this, you need to form 1 air loop for lifting. A flower can have as many petals as you want, but for beginners it is better to make a few to master this skill.
Crocheted Irish Lace: Master Class
- The first step is to tie the initial chain of lace. With a slip knot, the thread is attached to the hook, after which 21 air loops are knitted. A lot of thread for the initial chain should be allocated, since if it is not enough to collect all the loops, then the row will have to be tied up.
- An additional loop in the row must be required. It is necessary to rotate the product when knitting. It is not necessary to knit in anything, its main purpose is to align the edge of the lace.
- Then a series of elongated loops is made. The hook is led to the next loop in the row from it, while it grabs the yarn and stretches it. Please note that the size of the buttonhole depends on the size of the stitch. Thus, the tighter the lace is knitted, the smaller it will turn out.
- This action is repeated throughout the chain. After knitting the last row, an additional loop is moved to the knitting needle from the hook, after which 21 loops are pulled there.
- Then the loops should be grouped. 5 of them are crocheted and the yarn is pulled out. An air loop is formed. There should be 4 of them. To simplify the task, the loops should be well drawn out.
- The columns are knitted without a crochet in elongated loops. 5 rows should be knitted. The action is repeated until the end of the row.
- After moving to a new row, the columns continue to be knitted without a crochet.
- Knitting continues until the product reaches the desired size.
Knitting in this technique is not so difficult
At the end, the thread is threaded through the last loop and cut with scissors.
Technique and principles of Irish lace
Work starts with the right pattern. If a wardrobe element is knitted, then the pattern should ideally match the figure. If you make even minor flaws, then later you will have to redo the work for several hours. Therefore, each pattern must be built individually.
Many novice craftsmen cannot understand what to do with the threads left over from the motives? There are a lot of these threads left, so for some they become a problem. Everything is not as difficult as it seems at first glance. It is enough to take into account in advance that the threads should remain more than necessary for the yarn, since at the end it will need to be cut off by threading it into the last loop.
Work starts with the right pattern
Another important point in Irish lace, this is the knitting of motifs. During this, you always need to control the level of thread tension. If it is too tight, then the product will turn out to be narrow and small, and if on the contrary, it will be loosely stretched, the product will be shapeless.
To add zest to the work, you should use threads of different thicknesses. So the work will be more beautiful. A mesh should be made from a thin thread, and separate elements of clothing should be knitted with a medium thread.
What mistakes do beginners make in Irish lace technique?
- Wrong thread color. Many mistakenly believe that the color range of threads in one product, knitted with Irish lace, should be varied. This is not true. So that a person in such yarn does not look like a Christmas tree, it is enough to use a maximum of 3 colors when knitting. But these colors should match well.
- Lots of motives. Many novice craftsmen make motives "in reserve", wanting to test themselves. This is wrong, especially if clothes are knitted. For example, a blouse that is not knitted according to a pattern can simply hang on the body. It's not beautiful.
- Sheer knit. It must be remembered that the technique of Irish lace involves a fairly transparent knitting. Therefore, if a jacket is put on, connected by this technique, then under the bottom you need to wear a turtleneck or T-shirt. If there is a desire to wear just a jacket, without anything underneath, then the knitting should be tight enough, then the product will not be enlightened.
Irish lace: the basics of knitting flowers (video)
Yes, Irish lace is not an easy knitting technique, but anyone can learn how to master it. As the saying goes: "There would be a desire." If you practice long enough, you can not only tie Irish lace small flower, but also to make a wonderful jacket, scarf or sundress according to mk.
History of Irish lace
Lace is undoubtedly a luxury item. Their presence on clothes makes it more expressive and unique. In Ireland, lace appeared for the first time in the middle of the 19th century. The most amazing thing is that Irish lace appeared on the island as a result of poverty.
As you know, in the middle of the 19th century, the Irish were going through very difficult times. Hunger reigned around and throughout the country, as an aid to the poor, knitting training centers began to appear. Some of these centers appeared thanks to the help of the church. Local landowners also actively helped in this.
Initially, styles and patterns were borrowed from other European countries. But gradually, Irish lace with its own patterns gained great popularity. Due to the complexity of the designs, patterns from Ireland have attracted great interest in other countries. The handicrafts of Irish craftswomen were highly valued all over the world and gained maximum popularity by the end of the 19th century.
But then the popularity of lace products began to fade. It happened because of the industrial revolution. More affordable machine-made options appeared, and hand-stranding fell out of favor.
Jeans decorated with Irish lace look very beautiful and modern.
Bright Irish Lace Top: Scheme and Description
Scheme of motifs for the top
Description and diagrams
Openwork knitted vest size 42/44. This chic vest model is crocheted using the technique of Irish lace or it is also called coupling guipure lace. When creating your masterpiece, do not forget to take into account that guipure lace does not stretch like simple knitting, it is more rigid like fabric and this must be taken into account when building a pattern.
Irish lace dress
The video shows how to knit an element of Irish lace - a flower. It was this lesson that was not copied from anyone, and the girl developed all the steps by her own example. We suggest you repeat this technique step by step.
In this video you can learn how to knit Irish lace. This lesson will focus on the irregular grid.
Press "Like" and get only the best posts on Facebook ↓