How to make a ribbon star. MK. Ribbon star and lotus bow. Giving an asterisk volume

Oh, whatever one may say, summer is the most wonderful time of the year. In every way. There are many things that inspire creativity. Just look around. Everything around is pleasing to the eye and uplifting, and in this state you really want to create.
And, of course, I want to go to the sea. And if at the moment it is far away, then it is simply necessary to do something from the marine theme.

This is how it inspired me to create today starfish. It was enough to see a photo of this creature on the Internet. Then things went on somehow by itself.

And, of course, I did a master class. Without him, I certainly would not have been released)))

A starfish from ribbons is not difficult to make, but we still need manual dexterity, and also, a little patience while sewing on beads.

And so, to create a starfish, we need:

1. Satin ribbon - 5 cm wide.
2. Candle or lighter
3. Beads
4. Needle for beads and monofilament
5. Scissors
6. Glue (any suitable for gluing fabric)
Fold the ribbon into a square. We do not cut the square.

We cut it diagonally, so that we get a large triangle.

We cut off five such triangles from the tape.

Next, put the triangle with the wrong side up and press it with your finger in the middle so that the ray turns out to be even and begin to wrap the edge.

After that, similarly wrap the other edge of the triangle.

Fold the resulting part in half with the right side inward.

Cut off the edge, getting a right triangle. We have one ray ready.

We make five such rays. For convenience, I made a video on how to create a ray for a starfish.

Lubricate the cut of the rays with glue and connect them together. Ribbon asterisk is ready.

In order to make the starfish more spectacular, add beads.
I just sew beads along the edge of the rays.

This is the end result of a miracle. I will be glad to your comments)))

Ludmila Sapronova

Ahead of the Great day-May 9! A holiday for all generations! I propose to your attention to make a breast brooch- St. George ribbon star. St. George Ribbon- this is a centuries-old symbol, personifying the feat of a Russian warrior on the battlefields. And for us, it is a symbol of awareness of one's inalienability to the motherland and an inalienable experience of happy and unhappy days with her.

In order to make such you need a star:St. George Ribbon,satin ribbon of two colors(black and orange, ruler, hot glue, lighter, soldering iron.

cut off St. George ribbon 6 cm and fold on the floor

We put a ruler on the corner and cut it off with a soldering iron

Turning to the other side

Here's what we get. We make five such corners and use a soldering iron to connect them in the center.

It turns out this star, now we need to decorate the middle. We make from satin ribbon flower.

We make seven such petals and glue them together with glue. Ready flower when glued on star.

Here's what we got.

You can also make flowers for tapes

Here are the various St. George ribbons can be done for the holiday of May 9th. It all depends on your imagination. The size of the flower will depend on the size ribbons(I used 4cm).

Related publications:

Good afternoon to all the guests of my blog! I bring to your attention a small master class on making a bow from satin ribbon. Such bows.

To make an elegant brooch, we need: - a red satin ribbon, 5 cm wide, - a white satin ribbon, wide.

AT kindergarten a music director needs a lot of attributes and various benefits to conduct classes. In my work life.

Two years ago, in our kindergarten, I held a master class with teachers on how to make a rose from a satin ribbon. The rose is being made.

February 23 is approaching - Defender of the Fatherland Day. The holiday is celebrated by the whole country. On this day, we pay tribute and gratitude to those.

With the appearance in stores of a huge variety of interior decorations for any holidays, you can catch yourself thinking that you want something that is not stereotyped, not standard. For example, christmas toys on the Christmas tree should be unique, reflect the mood of your home. The same applies to the stars on the Christmas tree, because this is the most important and final decoration.

An excellent solution would be to make a star with your own hands, such hand-made will be to the liking of the whole family. And also very good gift for Christmas and new year holidays a set of homemade toys for the Christmas tree and the main beauty - the star. If you think that the star is useful only for the holidays, then this is not at all the case, it can be interesting to use it in the interior after.

Decorative Christmas tree with a star

If you want to make not only an asterisk, but also a complete decorative Christmas tree, then this can be done from a satin ribbon. Do not forget that you can make additions from fabric.

From the materials you will need: ribbons of two colors, the width can be any, for the result, as in the photo, 1.3 cm, cardboard, a stand (a spool of thread is quite suitable for it), white acrylic, and ordinary, accessories (scissors, ruler, tweezers, compasses), a tube, a candle and a thermal gun, to decorate a bead, you can also come up with beaded jewelry.

The ribbons are cut into pieces 9 cm long.

In the finished form, something similar to loops is obtained, it all looks like this:

Now it's time to make the base of the Christmas tree, we will make it out of cardboard. We draw a semicircle from the edge, the diameter is 12 cm.

We cut this blank and glue the edges, we get a cone.

Now gradually glue our loops in circles.

If we started with one color, we make the second row with another.

So as a result of the alternation, such a Christmas tree is obtained.

We make a leg and a stand from a tube and a coil, and paint acrylic paints into white.

Now that the whole Christmas tree with a stand is ready, it remains to supplement it with an asterisk, also from ribbons.

We will make a star from a silver ribbon, in addition, we will use all the same materials as for the Christmas tree.

We cut a 4-centimeter tape of the same length and get a square.

Step by step, we begin to add this square:

Add the resulting triangle again.

And two more times until we get a small petal. The easiest way to do this is with tweezers.

Cut off the excess, along the contour of the red and green lines, as in the photo.

We fix the result with the help of a candle.

Since a real Christmas star is eight-pointed, we make eight of the same petals.

We fasten them.

For a more stable base of the star, decorate a small cardboard circle with the same ribbon.

And we will fix the resulting star on it, decorating its center with a bead.

We connect the Christmas tree and the star with a thermal gun.

paper star

A real Christmas tree star can be made out of paper. To do this, you can find absolutely any star ray template on the Internet and print it on plain A4 thick paper. We will make a five-pointed star, so ten prints will be needed. Also prepare scissors and a glue gun.

After that, from each printed leaf, we cut out a beam separately.

And we begin to connect the glued elements together.

It turns out here is such a real five-pointed star.

If your Christmas tree is very elegant and colorful and a single-color star seems boring, print out the rays of different colors and put them together, as in the photo:

thread decoration

Decorating a Christmas tree is a responsible business, if you have a little time and the right mood, why not make a Christmas tree star out of thread.

You need very few materials: a small piece of cork board or a dense pallet from something, 10 nails, PVA glue and a thread of any color.

Let's start by preparing the thread, pour glue into a plate and place the thread there, let it get wet. On the pallet we draw or draw our asterisk and drive a carnation into each of its corners.

MK. Ribbon star and lotus bow.

In stores of accessories and materials for flower and gift shops, you can buy a variety of ready-made decorative bows. Various colors, texture and dimensions. Everything seems to be so simple - choose and buy what you like. However, the masters - entertainers are interested in the process of their manufacture, and therefore, today we will share with you the secret of making bows - stars.

Master class do-it-yourself star bow.

To make a star bow, we need a template, a device that can be cut out of cardboard and wrapped with tape to make it easier to remove the bows. The view of the template is shown in the photo below (you can download the scanned template, print and cut out - the star bow template)

We wind the ribbon on the template (the photographs on the left show front side, and on the right, reverse side).

Pass the beginning of the ribbon through the slot in the center of the template and start wrapping the corners of the template as shown in the photos.

It is necessary to wrap each corner 3-4 times, that is, 3-4 rows. Upon completion, temporarily secure the middle of the bow with a pin.

After that, you need to carefully remove the bow from the template.

Unfold the star bow and carefully remove the petals. We removed one row of petals, turn the top row so that the petals of the bottom row stand between the petals of the top row. You can turn to any angle, it is not necessary to do it exactly, or you can not turn it, then you get a completely different kind of bow.

The last step, fixing the bow. Earlier, we temporarily secured the center of the bow with a pin. Now that we've formed our bow, it's time to finally secure the bow. You can fix the center of the bow different ways, for example, with a stapler or with a needle and thread. Another method that we offer and often use is shown below.

Fixing the center of the star bow. In the middle of the bow, we make two holes with a hot soldering iron, as shown in the photo above. We pass a thin ribbon for curls through the holes and tie it on the back. This method is convenient for attaching an asterisk bow to a gift. With the help of a ribbon, you can also additionally make curls to the bow.

So our asterisk bow, which we made with our own hands, is ready. Now, if suddenly there is a need for decorative ornaments, it is not necessary to run to the store and choose the right bow. You can always do it yourself.

Not far off the New Year! It's time to think about, as well as their packaging. To do this, you will need to purchase the appropriate one for the occasion. wrapping paper and prepare decorative ornaments. Bows - asterisks, in this case, fit perfectly. Many may like the idea of adding such bows Christmas decorations. An elegant Christmas tree will turn out.

Needlewomen who have mastered the amazing technique of creating kanzashi jewelry can shower all family members and more with gifts. In this way, absolutely any thematic products are made. We offer you a detailed guide, illustrated with photographs, on how to make an order for Defender of the Fatherland Day. Any dad will like such an elegant star, which he will gladly accept as a gift from his family and put on on February 23. If you have everything you need for work, listed in the list below, then you can easily make this holiday decoration according to our tips.

But, of course, such a star can be used in another way: for example, decorate a green Christmas tree with it!

To make the basis of the order - the star you will need:

star template - about 13 cm;
white felt;
sparkling gold tire;
flower huggers 2 cm - quantity 6 pieces;
semi-beads 7 mm - the number of 6 pieces (included with huggers);
white dense elastic band - cut size 1.5 cm wide and 4 cm long;
clip 7.5 cm (or pin optional) as a brooch attachment.

To model the central element of a flower, you need to take:

10 cream-colored satin cuts - squares 5 * 5 cm;
5 white satin cuts - squares 5 * 5 cm;
5 white satin cuts - squares 2.5 * 2.5 cm;
5 brocade cuts of gold color - squares 2.5 * 2.5 cm;
15 cream-colored satin cuts - 2.5 * 2.5 cm squares (optional for shamrocks).

Standard tools for work: scissors, lighter, thread with a needle, glue gun (or superglue).

Stages of executing a kanzashi star:

Draw a star of the desired size on thick cardboard (recommended width 13 cm). Also, a symmetrical base can be printed on a printer. Cut out the template. Then circle the template, leaning it against the white felt, cut out the base. You can also cut out 2 felt stars, then lay them on top of each other and glue them to make the product denser. Dense foamiran is also suitable as a base.

Prepare the strips of the golden tire by cutting it into desired lengths.

Golden hugs and mother-of-pearl half-beads are perfect for decorating the rays of an asterisk.

Glue a gold tire around the entire perimeter onto the prepared felt star. Thus we will create holiday basis for men's brooch.

Prepare satin and brocade, cream, white and gold squares in the quantity indicated in the list, with sides of 5 cm and 2.5 cm to create a central flower.

Bend each square four times to model the lush five-layered petals.

Fasten separately large triangles (put white on 2 cream ones) and small ones (put gold on white).

Curl sharp corners in the resulting layered squares. You should get separately a triple large sharp petal and a double sharp small petal. Glue a small detail into the center of a large one - an elegant multi-layered petal is ready.

Make small single kanzashi petals from the extra cream squares for the shamrock twigs.

Fasten pieces of 3 pieces together. You should have 5 neat branches.

Glue the main flower. Glue a half-beaded hugger in the center.

Glue cream shamrocks into the grooves between the petals.

Decorate the rays of the star with half-beaded huggers.

Cut out a 4 cm felt circle and stick it on the back of the flower.

Glue to the star.

Another felt circle is for attaching a clip or brooch. Make 2 slits, insert the ends of a wide elastic band and seal.

Glue the design on the back of the star.