How to tie a long ribbon bow. How to make a ribbon bow? Combinations with paper ribbons and curls

A ribbon bow is an invariable decoration of a gift, piece of clothing or headdress. There are many ways to make it, not to mention those that you can think of yourself.

How to choose a ribbon

When choosing a ribbon for a bow, it is important to decide on the color and texture. The shade should be chosen so that your decoration naturally complements the dress, hat or gift box. The bow should not be conspicuous, but only add a slight accent of solemnity.

To make a fluffy bow, you will need more than one meter of ribbon; it takes a lot of length to knots and folds.

As for the quality of the ribbon fabric, satin or satin material is usually chosen. However, those who are just learning how to form bows will find it difficult to tie slippery ribbons, so you are advised to use fabric with a denser texture. For a beautiful bow, velvet or nylon ribbons, lurex or print fabrics are quite suitable. When decorating bouquets, ribbon with wire inserts is often used.

Bow making basics

There are certain rules, knowing which you will be able to form bows of any model in the future. The universal procedure for making a bow looks like this:

1. Prepare a ribbon of the calculated length with a small allowance for adjusting the bow.
2. Straighten and lay out the cut on a smooth area of ​​the table.
3. Pull the edges of the tape to the middle, overlapping to form "two ends and two rings."
4. Achieve the same size and symmetry of the two halves.
5. Lay one loop over the other, loop around and pull through the circle in the center.
6. Tighten the middle of the bow well.

The bow looks complete if you carefully cut its ponytails diagonally or at the corners.

Terry bow

To make it, it is better to take a tape made of a tough, durable fabric that can keep the shape of the product well. Let's start forming a bow:

Wrap the ribbon in several rings the size of the product being created.

Smooth out the rings and make diagonal cuts.

Now fold the rings so that the cut corners are in the center of the folded ribbon.

Tighten the slots with ribbon or wire.

Gently straighten the bow rings, alternating in one direction and the other.

Fluff the product - the decoration is ready.

Classic or strict bow

The classic bow has a simple shape of two loops and two tails of the ribbon, sometimes this particular model is able to emphasize the importance of a gift. When forming a strict model of a traditional bow, the ribbon must be folded in half, and the place where the ends join is fixed using glue. It is better to wrap the intersection with a piece of tape of a neutral shade and seal the ends on the reverse side. Such a bow differs from a simple classic one by an underlined middle.

When choosing an adhesive, test it on a piece of tape so that there are no traces left after drying. Otherwise, when making a bow, you will have to carefully hide the traces of gluing.

Bow in two shades

Prepare ribbons of two colors - one wide, the other narrow, do not forget about the ribbon for tying a bow to a gift, preferably a neutral shade.

Procedure:

Fold the loop with a wide ribbon, reinforcing the ends with glue.

Put a narrower ribbon on it, and repeat the same procedure.

Fix the resulting "sandwich" in the middle with paper clips or glue.

Secure your item to the gift box with the third ribbon.

To determine the length of the ribbon to fasten the bow to the gift, wrap it around the package, add another 50 cm on both sides, taking into account the tying.

Bow in layers

To make such a bow, you need to take ribbons of three colors and different widths. The wide tape must be cut to the greatest length, and the narrowest one should be made the shortest. Carefully trim the ends of the bow with corners. Arrange the ribbons so that the wide one is at the very bottom, and the narrow one is at the top. Then tie the folded parts with an additional ribbon so that long tails remain to strengthen the bow on the gift.

bright chrysanthemum

Prepare a thick ribbon, scissors and wire.

Procedure:

We turn the tape into rings according to the size of the future flower.

Smooth out the rings and make corner cuts.

We turn the rings in such an order that the cut out triangles are in the middle of the product.

We fix the cuts with wire.

To form petals, make successive cuts on the loops folded together.

Spread the petals of the "chrysanthemum" in different directions, starting from the center.

holiday flower

Form an ordinary ring from the prepared ribbon, holding it with two fingers. Then repeat these manipulations until at least ten rings are formed. The number of rings is arbitrary, depending on the intended volume of the bow. The rings are tied in the center with a thin ribbon, then the loops are straightened, and the bow is fixed on the gift.

Those who find it difficult to tie bows can use a bow maker.

openwork bow

It will take a little more time and effort to make this unusual bow. Stock up on the following materials: satin ribbon, scissors, glue, and a stapler.

Follow these instructions:

Cut the ribbon into desired lengths.

Glue them into rings.

Lay the rings on top of each other, placing a piece of tape with cut tails at the base.

Fix the center of the product with a stapler or glue.

Cover the joint with a small piece of tape.

Using a separate long piece of ribbon, attach your openwork bow to the gift box.

Elizabeth Rumyantseva

For diligence and art there is nothing impossible.

Content

Is it hard to imagine a solemn moment without decorating or decorating with elegant bows? Lush and strict, elegant and frivolous - they create a special mood at the holiday. Making a hairpin or a bow tie for an evening dress from satin ribbons is not difficult if you follow the instructions.

How to make bows from satin ribbons

Jewelry assembly technology requires ribbons of different colors, special widths according to your idea. You will need a minimum set of tools and materials for manufacturing. In the case of passing the master class, you will not have a question about how to make a bow from satin ribbon. The proposed step-by-step instructions will turn the work process into a pleasant and understandable one. You will need:

• lighter;
• scissors;
• threads;
• needle;
• ruler;
• glue or heat gun.

Depending on the purpose of the bow, there are various options for manufacturing technologies. He can be:

• small, made using a fork - suitable for decorating a postcard;
• magnificent, elegant - in the style of kanzashi - for a holiday in kindergarten;
• a strict bow tie - for an important banquet;
• double - for decorating hair, attached to a headband or hairpin,
• solemn - on a gift box.

Satin bows can be made in the form original flower. If you choose the right color and shape, they will become unique decorations:

• elegant evening dress;
• frivolous sundress;
• styled hair;
• in the form of a bracelet on the hand;
• stylish handbag;
• bridesmaid dresses;
• elegant blouse;
• as a pendant around the neck;
• furniture in the interior;
• stylish dress for prom;
• curtains in the apartment.

How to make a classic satin ribbon bow

The most popular and simple, this bow is used to decorate clothes and interiors. Even a modest gift, decorated in this way, becomes elegant, solemn and attractive. To tie a bow you will need:

• take a workpiece 20 cm long;
• burn the edges
• fold in half with the smooth side inward;
• bend the edges outward again;
• pick up, so that each has a loop at the top, and a bend between them at the bottom;
• cross the folded parts in front, forming a ring under them;
• pass one loop through it, tie.

Strict beautiful do-it-yourself satin ribbon bow

You can tie a strict stylish bow for a special occasion. It will decorate a lady's bag, dress or gift. Here it is important to choose the right colors for crafts so that it looks elegant. How to make a bow from a satin ribbon, for example, such as in the photo. Prepare scissors, glue, material of three colors for work. You should:

• take a blank 30 mm wide with a length of 18 cm;
• roll into a ring;
• connect the edges with glue.

The next steps to assemble the decoration are:

• fold the ring so that the seam remains at the bottom in the middle;
• iron;
• take a ribbon of a different color of the same width, with a length of 7 cm;
• wrap a ring around the workpiece across;
• fix with glue;
• prepare a tape of a contrasting color of the same length, but thin;
• wrap around, in the middle of the previous ring;
• seal;
• iron.

Two-tone beautiful bow from a satin ribbon with your own hands

A stylish and very elegant decoration can be assembled from blanks of two colors. Ease of manufacture does not mean that it will look modest. Elegant and spectacular, it will decorate the hairstyle and the original dress. You will need a wide and narrow blank. To make jewelry:

• measure 2 pieces 15 cm long - one narrow, the other wide, cut off;
• put one on top of the other;
• roll into a ring;
• fix the joint with glue;
• iron;
• tie a bow in the middle with a narrow ribbon, closing the junction, forming a knot;
• cut off the ends;
• glue.

DIY gift bows from satin ribbons

An anniversary or birthday gift box will look much more impressive if you decorate it with a bow. It can be, depending on the situation, small, elegant or voluminous and lush, for example, like this. It is very easy to tie it - you can quickly learn, even without a master class, following the instructions:

• take a workpiece two meters long;
• wrap it around the open palm of your left hand;
• remove carefully;
• leave the end free.

• on a workpiece folded in several layers, cut off both corners on one side, by about 5 mm;
• burn it so that it does not bloom;
• repeat operations on the other side;
• fold the workpiece so that the cut parts are aligned in the middle;
• tie with the free end of the ribbon;
• straighten each petal, giving it volume.

A lush bow made by yourself can please a young beauty if it is woven into her hair or becomes an ornament. gift box. For its manufacture, you will need 6 blanks 12 cm long, 5 cm wide, the same number 11 cm long and 30 mm wide. First, they need to be burned around the edges. You will also need elegant thin braid, small beads and a piece of felt. Next, you need to do this:

• take wide blanks;
• fold in half;
• sequentially collect on one thread;
• pull, fasten;
• repeat the process for narrow ribbons;
• cut a circle with a diameter of 40 mm from felt;
• stick a large blank on it;
• take pieces of thin braid 12 cm long - 6 pieces;
• fold each into a ring;
• glue on the front side by laying on the petals;
• fix the workpiece from a narrow ribbon on top;
• pour glue, approximately 10 mm in diameter, onto a piece of fabric;
• lay the beads on it tightly in a circle;
• cut in a circle;
• glue the decor in the middle of the decoration.

If you want to decorate your holiday card with a tiny bow, try using a fork. The process will go like this:

• take in left hand fork;
• loop a ribbon over it so that the edges remain on the right;
• throw the far end behind the fork through the lower one in front;
• insert it in the middle between the teeth and bring it back;
• enter the remaining tip of the ribbon on the right into the same gap, but from above;
• turn the plug over and tie both ends with two knots;
• remove the bow;
• cut the ends, singe.

DIY openwork satin bow

Do you want to learn how to wrap gifts like at Dior? The technology will not cause difficulties, and the view will be unusual and original. For manufacturing, you need satin blanks 25, 20, 16 and 10 cm long. To make such an ornament:

• burn the edges of the ribbons;
• roll the longest into a ring;
• glue the ends;
• repeat operations with other blanks;
• stack all the rings on top of each other, starting with the larger one, place the glued sections from below;
• pass an additional ribbon on top of the rings (as an option, it can pass inside the small element);
• fasten on the back.

Bow decorations are used everywhere: clothes, gifts, decor, accessories. Therefore, the topic of how to make a bow from a ribbon is so relevant. Today we will learn how to tie the main types of bows, and also try to create original accessories in the form of headdresses, jewelry for a wedding, bijouterie.

How to make a ribbon bow? Learning to tie in basic techniques

So, an accessory in the form of a bow can be the perfect touch that completes the ensemble in clothes, gift wrapping, jewelry making, etc. It can be placed anywhere in the product: on the side, behind, above or below. Such a stroke will attract attention, make the product more spectacular.
As you know, bows are tied in different ways, so before considering how to make a bow from ribbons to create decorations, we will learn how to tie them using the most common techniques.

1. Classics of the genre or tying in the classical technique.

1. A bow made in several layers (multilayer).

1. Strict. Differs in restrained lines, has a minimum of decor.

1. From two tapes of different widths. It is also called bicolor.

1. A sophisticated version of a strict bow or better known as Dior.

1. Bulk flower.

How to make a ribbon bow for hair jewelry?

Making a hair accessory with a few pieces of ribbon is pretty easy. Products of different shapes and sizes are made from satin stripes. Step by step instructions The instructions below will help you do this quickly and easily.

How to make a ribbon bow for a regular hairpin?

Initially prepare the ribbons:

• three of the same size;
• one longer for elongated ends;
• one shorter for a twist in the center.

You will also need a hairpin, singeing candle, transparent glue.

1. From three identical ribbons we make a blank according to the technique of making a strict bow.
2. Fold two of the blanks, as shown in the photo, fasten together.
3. Pull the third workpiece in the center.
4. From the longest section, fold the design in the classical technique, but instead of tying it, tie it in the center with a thread.
5. From the smallest piece, make a wrapped part to wrap the middle. Shrink the edges of the workpiece (the manufacturing principle is visible in the photo), singe.
6. Collect hairpin:

• workpiece tightened in the center;
• two-piece blank;
• bow according to the principle of classical technique.

1. Wrap in the middle, fasten the decor on the hairpin.

How to make a flower bow on a hairpin from a ribbon?

For such decoration of hairpins, you must have:

• two ribbons of the same color, 5 cm wide and 2.5 cm wide;
• metallic ribbon in silver or gold color;
• a needle and thread;
• a candle or a lighter for burning the edges;
• glue (transparent);
• scissors.

1. Cut six pieces of the widest tape. They should be 14–16 cm. Use fire to process the edges and sew with a flower, as in the photo.
2. Perform the same actions with the second ribbon of the main color, the only difference is the length of the cuts should be 10–12 cm.
3. From metallized, cut into six strips of 15-17 cm and 8-10 cm. Roll them up like petals, solder with fire.
4. Assemble the flower by gluing it with transparent glue:

• largest base flower;
• large metallic petals;
• second flower;
• small metallic petals.

1. Decorate inside, you can use a bead or a decorative stone for this purpose.
2. After the flower is attached, the elastic band or hairpin (clip) is ready. You can use such a flower to decorate elastic bands or hoops on your head.

Rose decoration with a bow on a hair bun?

For work you need:

• 5 cm satin strip;
• tweezers;
• scissors;
• needle with thread;
• candle.

The work is done like this:

1. Fold the cut in half, and bend the corner down, as in the photo below. This is done so that the edge does not stick out of the flower.
2. Using tweezers, twist the beginning of the rose.
3. We fasten the bud with threads. When twisting, form edges and sew each branch with thread.
4. Singe the back of the resulting rose.
5. In this way, twist five flower blanks.
6. Stick them on the base, and tie at the bottom original bow, performing it in a classic style.

Video lesson: a special tie with bows for weaving into a braid?

Photo: design of all kinds of hair accessories with satin bows stripes

How to make a ribbon bow for wedding paraphernalia?

Recently, more and more often hand-made paraphernalia is used at weddings, and this is not only decoration of the hall. Ribbons are actively used to make bracelets for bridesmaids, boutonnieres decorating guests, and even a garter for the bride is made from them.

Bow bracelet for bridesmaids, how to tie?

In order to tie a similar bracelet, bridesmaids will need:

• two ribbons of the same color, their width should be 5 cm and 1.2 cm;
• matches, a candle or a lighter;
• decorative elements;
• transparent glue.

The bracelet for the bridesmaids is made like this:

1. Cut off a piece of a wide satin strip, singe the edges.
2. Tie the ribbon in the classical technique, but do not tighten the central knot too much.
3. Insert a narrow tie through it, with the help of which, the decoration will be attached to the arm.
4. Tighten the knot tightly and decorate the top.

How to make a boutonniere from ribbons?

You should prepare:

• two ribbons of different colors, 5 cm and 1.2 cm wide (in our version, it is red and white);
• scissors;
• transparent glue;
• pin;
• candle or lighter;
• decor in the form of a flower, stone or bead.

The boutonniere is made as follows:

1. From the ribbons, tie two classic bows.
2. Glue them one to one, as in the photo.
3. Carefully trim the edges, singe them.
4. Decorate the middle with a flower. It can be glued or fixed with wire.
5. Attach a pin and you're done!

Ribbon garter with a bow decor, how to make it yourself?

In order to make one of the main attributes of a wedding - a garter, you need to stock up not only with patience, we are preparing:

• under the base: a satin ribbon, at least 5 cm wide;
• for decoration: ribbons from 1.2 cm to 2.5 cm.
• wide elastic band;
• pin;
• decor;
• thread with a needle.

It is quite simple to perform a garter, for this:

1. Make a “pouch” from a satin strip under the base. Sew the edges. Do not save on the cut, as a large number of folds only decorate the final version of the product.
2. Pull a wide elastic band into the resulting workpiece with a pin.
3. Sew the ends of the elastic and garter.
4. From thinner ribbons, make bows in a classic design, as in the photo.
5. Sew them to the garter.
6. Decorate with decor. You can use beads, rhinestones, sequins, all kinds of flowers, etc.

Video lesson: how to make elegant glasses for newlyweds?

Photo: design options for wedding paraphernalia

How to make a ribbon bow for making jewelry?

Tape is a versatile material from which you can create anything. Many do not believe this statement, so I want to prove the opposite and demonstrate how ribbon bows turn into really exquisite jewelry for all occasions.

Step-by-step execution of an exclusive brooch

We make an exclusive brooch. To create it, you need to acquire:

• ribbons from satin, rapeseed and other materials. They should be of different colors, sizes, widths;
• scissors;
• a needle and thread;
• for singeing the edges, with a candle or a lighter;
• a pin for a brooch;
• transparent glue;
• decorative elements.

Now let's talk about the stages of work:

How to create a necklace with a bow?

For work it is necessary to prepare:

• a ribbon, the type of necklace depends on its width;
• large beads 8-16 pieces.

The work is as follows:

1. Tie a knot at the cut.
2. Put on a bead.
3. Next, another knot, bead, and so on until the beads run out.
4. Tie the ribbon in a classic bow, as shown in the photo below.

Do-it-yourself frill making master class

For such decoration you need to have:

• two satin stripes of this width: one with a pattern - 5 cm, the second rapeseed white - 2.5 cm;
• transparent glue;
• scissors;
• decorative element - a pebble or a bead.

The work is carried out in the following stages:

1. Cut three strips of 18 cm rapeseed ribbon, fold them as in the photo, glue.
2. Cut 6 colored cuts of 8 cm.
3. Wrap loops of them, fold into a bow-base.
4. On top of the colored loops, stick two white ones. How it is done in the photo below.
5. Now we take up the manufacture of the lower part. The basis is a rapeseed cut. It should be 22 cm.
6. Starting from the bottom, glue two rapeseed loops on it at an angle.
7. Glue a colored loop on top and repeat 4 times. The photo shows how it should look.
8. The last to be glued is a white rapeseed loop.
9. Glue the bottom and top (which was made in advance) parts.
10. Glue decor on top. For fastening, you can use a pin or ribbon-tie.

Video master class for making bow earrings

Photo: DIY jewelry options

Now you are convinced that knowing how to make a ribbon bow you can make a lot of unique, beautiful accessories and other embellishments. Experiment and surprise others with exclusive products.

How to make a ribbon bow? Many people ask this question on the eve of Victory Day, weddings and other festive events. Such an elegant decoration can be attached to a hairpin, headband or bracelet, it can also be added to a dress, suit and belt. And it seems like a small item, but it instantly turns an everyday outfit into a festive one! With the help of our master classes, you will learn how to create bows from different ribbons with your own hands. It can be satin ribbons, St. George, rep, etc. This instruction contains 4 options for making this item in various ways.

This craft is perfect as a decoration for a hairpin, headband or bracelet. It can also be attached to the chest as a brooch or on the belt - in the form of an elegant buckle.

Materials and tools:

• ribbons 2.5 cm light pink and pale blue (you can use any colors that blend harmoniously with each other);
• ribbon 1-1.2 cm fuchsia - a small piece;
• silver rhinestone ribbon - about 15 cm;
• pearls with a diameter of 0.6 cm - 3 pieces;
• glue universal;
• tweezers;
• candle or lighter;
• ruler.

Step 1
Cut off from the tape light pink shade 2.5 cm wide 4 pieces 10 cm long.

Take 2 pieces and place them on top of each other right side up. Using fire, melt their ends on one side. Seal the melted edges with tweezers or your fingers.
Repeat on the other side.
Connect the other 2 pieces together in the same way.

Take one piece fastened in 2 ribbons. Place it with both ends facing you with the bottom left corner towards the bottom right corner.

Align the upper part of the segments and iron with your fingers so that they form a regular triangle.

Wrap the upper part with an arc with the top of the triangle to the corners joined together.

Insert thread into the needle. Sew the bottom of the work with as few stitches as possible.

When finished sewing, pull the thread towards you and pull everything together. Then tie a knot. Additional sew the end of the piece with a few stitches to make it hold on tight.
Repeat these steps with the rest of the doubled segment.

Using all-purpose glue, connect the ends of both parts together. Leave them for a while until the glue dries. This will be the top of the bow.

Step 2
Cut 4 pieces 10 cm long from the blue and Pink colour 2.5 cm wide. Melt their edges with a candle or a lighter.

Place the pink pieces on the blue pieces with their backs facing each other.
Insert thread into the needle. Fold the two connected segments with the ends towards each other. Sew along their bottom edge.

Next, fold the next two pieces in half. Sew along the bottom with the same needle. Pull the pieces together.
Add the rest of the double segments in the same way.

Pull the thread towards you and pull all the elements together. Additionally sew the middle of the work with a few stitches to make it more durable.

You made the bottom part.

Step 3
Place the top item on top of the bottom one. Align them nicely.
Cut a piece of ribbon 1-1.2 cm fuchsia about 7-8 cm long. Wrap this piece wrong side up the middle of the craft. Cut off the excess.
Using fire, melt the ends of this piece and squeeze them with your fingers. Turn the resulting ring inside out, and move the line with the seam to the back side. So your middle will be neat on both sides.

Separate 2 pieces from the rhinestone tape along the length of the middle.

Glue them around the edges.

Attach a few pearls on top. Ready!

How to make a ribbon bow

This craft looks rather modest, since it is made of light brown grosgrain ribbon. Suitable as a decoration for a hairpin or elastic band. It can also be pinned on a dress of the corresponding color.

Using this technique, you can create products from the most various types ribbons (satin, silk, organza, brocade). Depending on the material, they will always look different.

What you need:

• rep tape 5 cm wide - 24 cm (rep tapes 4 and 2.5 cm wide are also suitable);
• a small piece of silver-colored brocade ribbon 1 cm wide;
• scissors;
• ruler.

Step 1
Cut the grosgrain ribbon 5 cm wide and 24 cm long into 2 equal parts. You should get 2 pieces of 12 cm.

Take any of the pieces and fold it in half. Run your fingers over the fold several times, forming a line in the middle.

Apply all purpose glue or hot glue in a straight line as close to the fold as possible on the left side.

Wrap the left edge in right side and place on the glue. Press down gently.

In the same way, glue the right edge of the segment to the middle.

Flip over to the other side.

Step 2
Place a dot of glue in the center.

Squeeze the craft exactly in the middle at the marked point. Wait until the glue dries.

Place a dot of glue on the back left, as close to the center dot as possible.

Fold the front side back in the middle. Glue it to the center at the marked point.

Repeat on the other side.

From the second piece of rep, make another bow.

Step 3
Connect the first part to the second at the center point.

Take a small piece of brocade 1 cm wide.

Wrap it around the center several times. Secure the end with glue on the back of the product. Ready!

How to make a bow "Spring"

This craft can be created in one color or in two colors. You can attach it to a hairpin, headband, bracelet, etc. You can also make it from a St. George ribbon by May 9th. It will come out just amazing!

What you need:

• silk ribbons of pink and olive shade 2.5 cm wide;
• a small piece of brocade ribbon 0.6 cm wide;
• thread, needle;
• universal glue or glue gun;
• ruler;
• pins;
• scissors.

Step 1
Cut 50cm from a 2.5cm roll of pink ribbon.

Fold this piece in half with the wrong side up. Iron the fold line well.

Also squeeze both ends of the tape in the middle with your fingers, wrong side up.

Wrap one end of the tape wrong side up to the middle line, exactly along the previously formed folds. Poke with a pin.

In the same way, fold the second edge of the tape to the middle. Poke with a pin.

Fold the piece in half. Iron the tops well.

Turn back. Flip.

Fold the left edge towards the center. Set it so that the point of intersection of the two lower tapes is flush with the top point of the ironed line. Poke with a pin.

Repeat on the other side.

Now take your needle and thread. Tie a knot. Sew the central part of the craft with small stitches. Don't cut the thread.

Pull the thread towards you and pull off the center of the craft. Additionally wrap it with a few turns. Fasten the thread and cut. You have made the top part.

Step 2
Cut 3 pieces 12 cm long each from 2.5 cm wide olive satin ribbon.

Take one piece and fold either end in half, wrong side up.

Departing from the top by 1.5 cm, cut a corner diagonally. Start from the middle, moving to the extreme points.

Repeat on the other side. Follow these guidelines carefully and your ribbons will be neatly and symmetrically cut.

Cut the rest of the pieces in the same way.

Now place all 3 pieces exactly on top of each other.

Take a needle and thread. Tie a knot. Sew the center of the pieces with one stitch, pinning them all together. Cut off the thread.

Now unfold the pieces. Arrange them so that their sides form rays, like a painted star.

Fasten the center part of the figure with a pin. Sew it with a needle and thread.

Pull the thread towards you. Pull off the center section. Additionally, wrap it with several turns of thread.

You made the bottom part.

Step 3
Place the top on the bottom. Connect them together with a few turns of thread.

Cut off a small piece of brocade ribbon golden hue 0.6 cm wide. Melt its ends with a lighter.

Wrap this piece around the central part, periodically smearing it from the back with glue. Attach the end to the back of the craft.
Ready!

And if you make this bow from a ribbon of the same color, it will come out something like this.

How to make a bow brooch

This dainty item would look great as a brooch. It can also be attached to a hairpin or headband. And if you make it from a wide ribbon, you get a chic belt buckle!

What you need:

• • ribbon 2.5 cm of the desired shade (we took pale blue);
  • middle for kanzashi to match the tape;
  • a small piece of felt to close the back;
  • scissors;
  • ruler;
  • universal glue or glue gun;
  • clothespins;
  • lighter;
  • thread and needle

Step 1
Cut 2.5 cm tape into 8 pieces 20 cm long each. Melt their edges with a candle or lighter.
Place one of the segments in front of you.

Bend it straight down the middle right side up. Smooth the fold line well with your fingers.

Move the line to a vertical position. On the left side above the fold line, put a drop of universal glue.

Wrap the top half of the segment in left side along the fold line, right side up.

Wrap the top of the craft down along the fold line. Make sure that the left side of the triangle formed in the upper part coincides with the left side of the lower segment.

Now wrap the bottom flap to the left. Adjust the top and bottom so that they are symmetrical.

Wrap the right corner to the left so that a little space is captured behind the corner line.

Now fold the left side under the corner to the end so that the end of the top corner is flush with the left edge of the part. If this is not observed, slightly straighten the part and fit it to the specified requirements.

Detail is ready! Secure it with a clothespin.

In the same mode, make parts from the remaining segments.

Step 2
Insert the thread into the needle. Tie a knot. Take one of the parts and remove the clothespin. Sew along the left side, starting at the corner at the top.

Now take the second piece. Insert it with a corner into the inner pocket on the top piece. Place the second piece so that its top is on the horizontal line of the middle of the first piece. Sew the second piece to the first.

Arrange the next two elements in the same way.

Leave about 5-6 centimeters of thread free. In the same technique, connect the remaining 4 elements to each other.

Now pull the thread towards you.

Pull everything as much as possible and connect it into a ring. Tie a knot.

Step 3
Now you need to hide the hole in the middle of the craft.
At the back close it with a small circle of felt.

In front, carefully glue the pretty center.

To complete the work on the reverse side, attach accessories - a brooch. Or any other desired accessories.

Below are videos from which you can learn how to make a ribbon bow in other ways.

Video instruction - how to make a ribbon bow

One of the skills that can add femininity to you and your daughters or help create a holiday and fun is the ability to make ribbon bows with your own hands. These accessories can become not only great decoration for hair, but also an interior element, decoration for holiday packages, souvenirs, Christmas trees and so on.

You can not only buy a beautiful satin ribbon bow, but also make it yourself. This will give your little queen sophistication, emphasize the beauty of her hairstyle, and also create a guarantee that her style will be unique among other girls. After all, most mothers are used to buying such things in stores where the choice is not very diverse, and children decorated with standard bows differ little from a large number of children at school or kindergarten, feeling gray and like everyone else.

This fluffy ribbon bow is very easy to make, you just need to take a little time and try a little, and step by step photo creating a ribbon bow will only make this task easier.

Before you make a satin ribbon bow, try to find out from the girl what colors she likes more than she wants to decorate the bow and other details. In the process of work and when choosing materials, consider these notes.

We will need:

1. Satin ribbon of the chosen color.
2. Elements for decoration to choose from (rhinestones, beads, multi-colored stones). So that the bow does not turn out to be too heavy, try not to overdo it with the size and number of these elements.
3. A small piece of felt for attaching parts.
4. Lighter.
5. Elastic band for hair in the color of a bow.
6. Scissors, ruler or meter.

Manufacturing process:

• We cut the satin ribbon into 50 pieces 11 cm long. To make the bow lush, it must be made from a wide ribbon (at least 3 cm).
• Fold the cut pieces in half with the satin side inward.

• Lubricate the inside of the parts with glue along the width of the tape. We fold and press the tape. When the glue is well saturated, we turn the edges of the tape with the satin side up and fold one on top of the other, as in the photo.

• We fold a small bow from the free edges of the ribbon, laying one on top of the other on both sides. As a result, we get tips on different sides. To make the tips even, singe the edges with a lighter.

• In the center of the resulting part, we glue the decoration elements we have chosen (rhinestones, beads, etc.). We carry out similar actions with all other petals of the bow.
• From the prepared piece of felt, cut out a circle with a diameter of 4-5 cm. For one layer, you will need about twelve petals.

• The top rows are formed in the same way. On the second layer, use the same number of petals as on the first. As the rows increase upwards, the number of petals will decrease. Accordingly, the circle in diameter will become smaller.

• After giving the bow the desired splendor, we attach the hair band to the felt base.

Ready! The resulting lush ribbon kanzashi bows can also be a great gift, and your efforts and originality will undoubtedly be appreciated.

Ribbon bows

Rep ribbons differ from other types in the ability not to disintegrate for a long time. Due to the density, such tapes also eliminate unnecessary fuss in the process.

We will need:

1. Rep ribbons of different widths and colors (you can buy multi-colored or with a ready-made pattern)
2. Barrette
3. Thread, scissors
4. Jewelry (bead, beautiful button, finished decoration or thin tape)

Manufacturing process:

• To get a wide and voluminous bow, cut out ribbons of the appropriate size. They should be rectangular in shape. about 10 cm long. We make small holes in the center.

• We wind the tapes on one in such a way that its tips are distributed on different sides. Depending on the desired number of loops on the bow, we make the appropriate number of turns. In this case, we made two loops. We fix the edges of the tape with clothespins.
• We sew the cut ribbons in the center with a white thread with a seam “forward with a needle”. Gently tighten the thread several times.

• We attach the top layer of a different color in a similar way. For this ball, a thinner ribbon and a different color that goes well with the background is suitable.

• We attach two types of bows one on top of the other with glue or sewing.
• In the center of the bow we decorate with the decoration element we have chosen:

• On the reverse side we fasten the hairpin:

Ready! This accessory will add zest to the assortment of existing school ribbon bows and improve the mood for you and your child.

Satin ribbon bows 5 cm wide

This dainty ribbon bow for any dress will be a great addition to your little beauty, and it's very easy to create.

Required materials:

1. Plain metal clip
2. Satin ribbon in the color of the girl's planned style (5 cm wide)
3. A thin ribbon to match the background (you can buy ribbons with ready-made various patterns and designs)
4. Glue, needle, thread to match the color of the ribbons
5. Lighter or candle and matches

Manufacturing process:

• Using scissors, we cut out strips about 6 cm long. We cut out as many as we decided to make such hairpins.
• We make thin strips about 1.5 cm long. To make the edges of the ribbons even, we singe them with fire.

• This process must be done carefully and slowly so as not to burn more than necessary.
• Fold the strips in half and sew in the center. Leave a small piece of thread for tightening. As a result, we get the shape of a bow.
• In the middle of the bow we tie with a thin ribbon and carefully sew.
• We glue the resulting bow on a hairpin.

The hairband bow is ready to delight the eye!

Bow of nylon ribbon

Nylon ribbon differs from other materials for bows by its affordable price, lightness and a very large number of shapes and tones. Most often, this type of bows awakens in the mind a picture-association associated with the famous September holiday at school.

Required materials:

1. Nylon tape 5 meters long and 5 cm wide
2. Jewelry (beads, small bows, buttons, etc.)
3. Needle and thread

Manufacturing process:

• Fold one of the edges of the tape into a triangle, then fold it in half again. As a result, we have the first petal of our bow.

• For the next ball of petals, fold another triangle on top of the first one. Every new triangle we fix in the corners indicated in the photo under the numbers 2 and 3.

• We do the same with the next petals, using the entire tape.

• When the tape ends and all the petals are already formed, we will connect the first and last petal from above and below with a light seam.

• In order to get the desired height of the decoration, we press on it from above. After reaching the required height, we fasten the bow from above and below.

• We decorate the bow with the selected decoration element and sew an ordinary hair band to the bottom.

Big and funny ribbon bows for all occasions are ready!

Ribbon bow for graduation

The birth of a child is one of the most beautiful and joyful events in life. On this day, I want everything to be unique and remain in memory until the end of my life as an excellent memory. One of the ways to give a special touch to the day of discharge from the hospital is a bow on the envelope, especially made by hand. All you need for this craft is a few free evenings and a good mood.

Required materials:

• Satin ribbon. To create a voluminous bow, you need to take a wider ribbon. It is customary to choose its color according to the gender of the newborn.
• A circle cut out of felt with a diameter of 3-6 cm.
• Glue "Moment" or hot glue.
• Scissors.
• Lighter.
• Decoration elements to choose from (rhinestones, beads, sparkles, small ribbons).

Ribbon bow for discharge: step by step photo and instructions

1. We cut the satin ribbon into 30-55 pieces from 6 to 9 cm long and another 10-15 pieces 5-8 cm long.
2. We bend one piece of tape, while the front side should be on top. We cut off the edge of the tape and singe it so that it does not stick around.
3. Bend the other end of the tape up inside out. The result should be a petal.
4. We do the same with all the remaining segments.
5. After finishing work, the petals need to be folded into a ribbon flower bow. To do this, we glue the petals one by one on the circle we cut out of felt. Glue must be applied in the center of the circle, while leaving somewhere free space of 1 cm around the edges.
6. We attach the upper balls of the petals in a similar way. Each subsequent layer should be composed of smaller petals.
7. We decorate the bow at will and whims of fantasy. You can use beads or a small bow in the center, and place small rhinestones around the edges, giving the product sophistication.

This bow is suitable both on the day of discharge of a native baby, and as a bow for a gift to loved ones who were lucky enough to become parents.

Bow for a gift

A universal decoration of any gift is a bow. Its presence on the gift helps to create a festive atmosphere, as well as awaken quivering feelings in the soul from the process of untying the bow and unpacking the box with the gift. You can create such a bow with your own hands, and it is not so difficult to do it. We invite you to see this for yourself.

Required materials:

1. Several ribbons from any material (can also be made from paper)
2. Scissors

Manufacturing process:

• We fold the prepared tape into several balls or simply wrap it around our hand.
• Remove from your hand and fold the tape in half.
• Cut off unnecessary corners.

• We fold the tape so that its corners end up in the center. We tie the resulting with a dense thread or rope.

Your holiday decoration is ready!

Handicraft can not only give you the opportunity to create something new and original, but also increases self-esteem, creativity, helps to overcome stress and internal tension. Even if you do not have pronounced creativity, do not assume that you will not be able to cope with this task. In fact, progress in creativity is possible only with the constant development of the inclinations that everyone has. Every person is a creator, so create and be happy!

Video: Bows to school. How to make bows with your own hands?