Openwork crochet shoes. Factory - knitting shoes. Work materials

BEAUTIFUL SMALL TUNISIAN KNITTING ORCHIDS - MK You will need: white and pink yarn (100% mercerized cotton, Yarnart - Violet, weight: 50 gr., length: 282 m, color No. 003 (white), 5046 (pink)), hook No. 1, 3 beads. Schemes: connecting loop knitting for the back wall of the loop Description of work We start by knitting the lower petals of the orchid. We make a sliding loop and knit 6 single crochets into it and pull it into a ring, make a connecting loop, as in the picture above. Next, we knit 2 single crochets for the back wall of the loop of the previous row = 12 columns. We will need the upper walls of the loops for knitting the upper petals of the orchid. Then we knit 3 arches from 5 air loops. To do this, we knit * 5 air loops, skip 3 loops of the previous row and cling to the 4th loop of the previous row with a connecting loop * repeat 3 times. Now we start knitting the lower petals of the orchid. To do this, we collect 4 air loops + 1 lifting air loop. Insert the hook into the 2nd air loop from the hook, grab the thread, stretch it and leave the loop made on the hook (we knit only under the wrong half loop of each air loop). We introduce the hook into the next air loop, grab the thread, make a loop and leave it on the hook. We knit all 4 air loops to the end of the row, without turning the canvas, we pull out another loop from under the arch. We have a total of 6 loops on the hook. We do not rotate the canvas. We knit the reverse row, for this we grab the thread and pull it through two loops and again grab the thread and pull it through two loops until one loop remains on the hook. In the next 2nd row we make an air loop, 5 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 7 loops. We close the loops in the same way in pairs. And then we knit the 3rd row: an air loop, 6 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 8 loops. 4th row: air loop, 7 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 9 loops. 5th row: air loop, 8 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 10 loops. Now we will decrease one loop at a time, for this, at the beginning of the row, we make a connecting loop under the purl half-loop of the lower loop. Then 7 loops under the purl half loop of each lower loop, 1 loop from under the arch = 9 loops. We close in pairs. 7th row: connecting loop under the wrong half loop, 6 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 8 loops. 8th row: connecting loop under the wrong half loop, 5 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 7 loops. 9th row: connecting loop under the wrong half loop, 4 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 6 loops. Next, with connecting loops under the purl half-loop, we go down to the next arch. And again from the second arch we knit 4 air loops + 1 lifting air loop. Well, we knit further, like the first petal. And then the third petal Now we start knitting the upper petals of the orchid. The principle of knitting is the same, the number of loops and rows in the petals changes. To begin with, we also make arches for the petals. This is where the front walls of the loops will be needed, under them we will fasten the arches. To go to the upper petals, we make 2 air loops and cling to the half loop of a small circle with a connecting loop. We need to knit 3 arches of 4 air loops, and the fastening of the arches should be approximately in the center of the petal of the lower circle, close the circle with a single crochet under the first arch. Now we knit a petal, cast on 5 air loops and: 1st row: air loop, 5 loops under the purl half-loop of each lower loop, 1 loop from under the arch = 7 loops. 2nd row: air loop, 5 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 7 loops. 3rd row: air loop, 6 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 8 loops. 4th row: air loop, 6 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 8 loops. 5th row: air loop, 7 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 9 loops. 6th row: air loop, 7 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 9 loops. 7th row: air loop, 8 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 10 loops. 8th row: air loop, 8 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 10 loops. 9th row: air loop, 8 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 10 loops. 10th row: connecting loop under the wrong half loop, 7 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 9 loops. 11th row: connecting loop under the wrong half loop, 7 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 9 loops. 12th row: connecting loop under the wrong half loop, 6 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 8 loops. 13th row: connecting loop under the wrong half loop, 6 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 8 loops. 14th row: connecting loop under the wrong half loop, 5 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 7 loops. 15th row: connecting loop under the wrong half loop, 5 loops under the wrong half loop of each lower loop, 1 loop from under the arch = 7 loops. And the second petal is similar. Now we proceed to the 3rd petal, for this I took a white thread and knit it into the 3rd arch: half-column, 7 double crochet, half-column. We do not tear off the thread and immediately tie the petals with single crochets. We decorate the finished orchid with beads.

Reading 17 min. Views 1.7k.

Recently, products made by with my own hands. Handmade items can be home furniture, decorations, toys, embroidered items, artificial bouquets, soaps, home decorations. Knitted shoes do not lose their relevance, which can now be found not only on the catwalks. She quickly migrated into everyday life, and not in order to save money. Sandals, boots, shoes look very interesting, sometimes they emphasize the outfit much better than Louboutins or pumps from Prada. However, you can make them yourself.

Advantages and disadvantages

Homemade footprints, booties have only pluses: they warm the legs, knit quickly, and allow you to use a variety of yarns. Even from the leftovers you can make something interesting, bright. There are an incredible number of models and schemes. The big question is street types of products. Many people still consider them impractical, requiring special care, and this is partly true. street knitted patterns have certain disadvantages:

  1. Requires washing. Simply brushing off the dust with a rag or wiping the surface with a sponge will not work. Therefore, drying will also take time.
  2. They can stretch, which happens quite often. Shoes begin to hang on the leg, and sometimes just fall off. Therefore, it is important to choose the right yarn, take a small size of knitting needles or hook, so that the fabric is less deformed.
  3. Not always suitable for walking. Knitted fabric is stuffed with dirt, loses its attractive appearance, walking along the clearing or dusty streets in such shoes is definitely not worth it. But this is a great option for clubs, going to the cinema, theater and parties.

It is very important to choose the right sole. For street models, ready-made, for example, from old shoes, is suitable. For slippers that are planned to be worn at home, the sole can be knitted from the thread used for the upper part of the product.

To wear knitwear not only indoors, but also outdoors, you need to think through all the details. It is necessary to take measurements correctly, to select materials. It’s just not possible to knit sandals or boots from the first ball that comes across.

Warm feet
Fit quickly
Allows you to use a variety of yarns
Not always suitable for walking

Materials and tools

Home slippers can be crocheted and knitted. It all depends on the skills of the craftswoman, the chosen model, personal preferences. For outdoor products, a hook is more often used. The reason is the strength of the fabric. It is less deformed, does not stretch, it is easier to add the missing width or height of the part with a crochet, the columns can be entered into almost any pattern, make additional strapping, add some kind of zest.

As for the size of the tool, it must be matched to the yarn. Manufacturers usually indicate the recommended range on the label. To prevent the fabric from stretching, we knit with a smaller number. You will also need tools:

  • needle or awl;
  • scissors;
  • tape measure;
  • cardboard, oilcloth or pattern paper.

Additionally, glue may be required, sometimes elastic bands, zippers, fasteners, decorative straps, beads are needed. In many ways, the set of tools is associated with the selected model. The focus is on yarn. It depends on her whether the boots will keep their shape, whether the summer sandals will stretch, whether the slippers will rub on the child.

Home shoes can be knitted from different yarns. Acrylic, which does not cause allergies, is excellent. For warm slippers wool is used pure or mixed with synthetic fiber. For summer options, you can take cotton. Outdoor shoes are not made from pure acrylic, as the feet will sweat, and the material itself often has a synthetic creak. Suitable for the following types of yarn:

  • cotton;
  • silk;
  • jersey.

Cotton with acrylic "Jeans" (Jeans) from the Turkish manufacturer YarnArt is especially popular in the circles of knitters. It has many analogues. Such a composition is durable, pleasant to the touch, does not cause allergies, does not irritate the skin, does not rub. The cost is also encouraging. For summer sandals and sandals with ties, you can take stretch yarn. It will fit snugly around your leg. When making knitted shoes, you can mix several materials: take linen or cotton for the main details, elastic threads or elastic bands for fixing ties and straps.


 Knitting needles
Types of hooks
Cotton
Silk
Linen
Knitwear
Wool
Additional fittings

How to take measurements

When knitting shoes, knowing only the size of the foot is not enough, but this is where you need to start. To take measurements, you need to stand on a white sheet with your feet in a standing position (this is important, since the parameters may change in a sitting position). Next, you need to draw four lines with a pencil: two - to determine the length (perpendicular to the leg near the thumb and heel), the rest - for the width (on the sides of the foot). It will also be necessary to measure such parameters as lift and fullness. For boots and boots, an additional ankle and shin girth will be required. What is important to pay attention to:

  • on the width of the foot - taking into account this indicator, the sole is selected or made;
  • sandals, shoes should fit snugly to the foot, measured to the millimeter;
  • for house slippers, you can add freedom of fitting;
  • for children's shoes, 0.5 cm is added to the length.

The fullness of the calves or ankles is not always needed, it all depends on the chosen model. For ordinary open slippers, socks, footprints, sometimes only the length of the foot and width are enough. If openwork boots are knitted, which are usually spacious on top, then 2-5 cm must be added to the circumference of the lower leg for freedom of fitting.

Sole options

The easiest way to make a sole is to simply knit. But in this case, you get slippers or other shoes exclusively for the home. It's not even about moisture resistance, but about the strength of the material. Knitted fabric, regardless of the threads used, will quickly wear off on the street. The felt sole is quite popular, it is easy to attach the product to it, but it is also more suitable for indoor shoes. Outdoor shoes, sandals or boots require special durability. Therefore, for such models it is better to use the sole:

  1. Of rubber, which is the most common option. For fastening, you will need an awl, with which holes are made, and then they are crocheted. This option is considered the most suitable for beginner needlewomen. If the rubber is soft, then you can make the first stitches with a thick needle or simply glue the knitted fabric to the sole.
  2. Leather. Not the most practical option. It is possible to pierce holes in the sole with an awl when knitting shoes, but there is a risk of stretching. For this reason, glue is most often used.
  3. Jute. She's great for summer shoes. Fastening is carried out with a needle, a hook, sometimes glue is additionally used.

Do not despair if you could not find either rubber, leather or jute soles in your city. The days of scarcity are long gone. You can always look for directories for needlewomen in social networks. Since knitted shoes are quite popular now, there will definitely be offers.

You can make your own soles for knitted shoes. For example, take old sandals, flip flops, boots and carefully cut off all unnecessary. You may need to change the insole. It can be cut according to the template from any material you like. But this method has a minus - worn shoes have scuffs, stains, against the background of a new top, all this will be even more noticeable. And buying a new pair just for the sake of the sole is far from always profitable.


 Rubber
Leather
jute
knitted

Model selection

You can endlessly view a photo of knitted shoes, look for interesting models, choose a manufacturing master class. But there is one catch - the result does not always live up to expectations. Often, a handmade thing brings only moral satisfaction, but is not used in everyday life. It is worth immediately determining for yourself: do you need knitted boots, will the child wear such slippers, will the relative be delighted with such an unusual gift? The main criteria when choosing a model: practicality, compliance with gender, age and preferences.

Baby

The very first knitted shoes for children are booties. To create warm models, pure wool or mixed yarn is used. It is important to make sure that the baby is not allergic to this material. Booties usually have ties or elastic bands for fixing on the leg. There are also summer or fishnet socks. They are knitted from cotton, children's acrylic or semi-cotton, they are more of a decorative function. Often decorated with beads, flowers, berries, bows of satin ribbons points.

For children over two years old, you can make slippers, closed footprints, moccasins, boots. Look interesting knitted sneakers with lacing. This option is not only for boys, you can play with colors and decor. For a girl of 5-6 years old, boots and shoes will be an excellent choice. For the home, you can make shoes with felt soles. For walks on the street, use the base from sandals and street slippers. All items can be crocheted or knitted.


 booties
Moccasins
traces
boots

Women's

There are never too many shoes, they are needed for all outfits, even better - for every handbag or hat. Needlewomen have the opportunity to bring any fantasies to life, as well as save the family budget. After completing one or two models and understanding the principle of creating shoes, you can come up with something of your own. For women often knit:

  • slippers;
  • boots;
  • shoes;
  • ballet shoes.

Most often, female models are crocheted, but you can knit shoes with knitting needles. In this option, it is important not to neglect the sample, wash it, dry it, calculate the number of loops in each centimeter and check if the yarn is stretched after wet heat treatment.


 Slippers
boots
shoes
Ballet shoes

Men's

The most common, comfortable and popular knitted shoes for men are socks. Although, it is more reasonable to call them clothes for the legs. You can knit from an elastic band or a sock, crochet and knitting needles, make a square, reinforced heel or a boomerang. But the possibilities are not limited to this. For a man, you can knit:

  • house slippers-galoshes;
  • moccasins;
  • slippers.

The original solution is unusual slippers in the form of a car or some kind of equipment. Most often there are schemes of tanks. A great idea for a gift for a man on February 23, for grandfather on Victory Day or for any other holiday.


 Socks
Slippers-galoshes
Moccasins
Flip flops
Tank slippers

How to work based on the model

Shoes are knitted relatively quickly, unless they are adult openwork boots or sandals made of fine yarn. They will require a lot of time, as well as prefabricated models from many motifs. You should start with the simplest shoes (booties, slippers, shoes, boots), which are easy to knit with basic skills. Having understood the principle of execution, you can proceed to more complex models.

booties

Despite the ease of manufacture, tied booties they look very nice on the leg, they look like marshmallows, hence the name "marshmallows". For them, you can take any thread with wool, acrylic, cotton, mixed options are also suitable. For work you will need: 50 g of yarn with a footage of 150 m in two colors, knitting needles No. 3, a needle with a wide eye. Step by step description knitting booties:

  • Cast on 30 sts with main color yarn. Leave a long tail, it will be needed for stitching;
  • knit 79 rows with a garter pattern, then turn over, but do not touch the 80th, close the first 13 loops from the edge;
  • then tie a thread of an additional color. You need to start with the front row, alternate with the wrong side twice. You get a strip of four rows;
  • again change the color to the main one, knit 4 more rows. So repeat all the steps until you get 6 stripes of two shades.

At the end of the work, it remains only to connect the booties. First, open loops should be sewn to the side, then both edges of the sole. At the end, with a thread, collect the top in the form of a marshmallow. The finished product can be decorated with ribbons, knitted or fabric flowers, beads.


 Knit in garter stitch for 79 rows
flip
Bind off first 13 sts
Tie a thread of additional color
Knit 6 rows of each shade
Sew open loops to the side
Unite both edges of the sole
Collect the top in the form of a marshmallow
Decorate the finished product

Crochet boots

It is not difficult to make beautiful boots for the house. Shoes are warm, so it is better to use woolen yarn. Such models are knitted from hexagonal motifs. Looks great in different colors. In a similar way, you can make children's boots. To work, you need a hook number 4. Description of the creation of the product (for size 36-37):

  1. Knit five hexagonal motifs. With a double crochet, make a flower in the first 3 rows, which is tied from 4 to 6. The result is a hexagon. Rows 1, 4 and 6 are knitted with a thread of one color, 2 and 3 with another.
  2. Take a ready-made felt sole or knit it according to any pattern.
  3. Next, you need to connect the resulting motifs with single crochet columns.

At the end of the work, the boots should be sewn to the sole, tied along the edge. The finished product can be left without decorations, as it is bright and original in itself. It is also recommended to decorate it with sequins, beads or decal.


 Knit five hexagon motifs Assembly scheme of motives Tie the sole
Connect the received motifs with single crochets to each other, sew to the sole

shoes

For a little fashionista, you can crochet shoes. This is a great alternative to ready-made shoes. For work, you will need yarn with a footage of 280-300 m per 100 g. You can take a thread with the same length per 50 g in two additions. You will also need a 2.5 hook and two buttons for decoration. Conventions in the diagram below: from n. - double crochet, c. n. - air loop. Step-by-step algorithm for creating a product:

  • take the sole either ready-made or make it using any scheme;
  • crochet three air loops and 15 tbsp. with n., it will turn out 10 times. Knit a row, connect to the beginning;
  • Dial 3 again. p., but now knit 14 columns of 2 with a common top;
  • make five connecting posts;
  • unfold the shoe, tie 3 c. lifting and 27 st. with n., make a backdrop;
  • for the strap, dial 20 in. p., knit st. with n., leaving holes for buttons.

If you need a greater depth of the product, then you can make an additional row of columns. At the end of the work, buttons must be sewn to the straps. You can decorate finished shoes with pearl beads and satin ribbon bows. Knit st. with n., leaving holes for buttons
Add decor

Slippers

To work on the product you will need: wool yarn two colors and hook number 3. Symbols: art. from n. - double crochet, c. n. - air loop, r. - row. Step-by-step algorithm for creating a product:

  1. To make the sole, you need to knit a chain of 30 in. P.
  2. Then with yarn of a different color from the middle of the heel, knit the upper part of the slippers. 1 and 2 rows in each column of the previous row, one st. from n. In front, subtract 3 columns, making one out of 2.
  3. Link 3 and 4 rows of Art. with n., in the front part, subtracting 4 columns and 6 columns, respectively.
  4. In the 5th row, in each column of the previous row, knit st. with n., decreasing by 1 column. So continue to the middle of the shoe, then in front of the art. with n., subtracting 6 loops. Tie the slippers also symmetrically on the other side.
  5. Make a flower out of 5 c. n. + 3 c. lifting item. 1 and 2 rows - 2 and 3 tbsp. from n. in each loop of the previous row, respectively. 3 row knit as 1.
  6. 4 row - 1 tbsp. from n. the first part of the work, the second - 2 tbsp. from n. In the 5th row, tie a flower " step by step» yarn of a different color.
  7. Collect the details of the product, sew the flowers to the slippers.
  8. Decorate to your liking.

You can crochet a variety of slippers, but they are all made according to the principle: the sole is made (usually the same pattern is used), then the upper part comes, then the strapping and decor. Slippers are usually a classic model with a closed toe and heel, reminiscent of ballet flats. Comfortable and soft, they warm the legs well, but at the same time they do not fall off.


 According to the scheme, knit the upper part of the slippers Decorate

Decoding schemes

Since shoes are most often crocheted, the basis is ordinary posts, connecting, with one or two crochets. Schemes often go in a duet with models, you just need to learn how to read them correctly. In descriptions, abbreviations are most often used, these are the first letters: р. - row, art. b. n. - single crochet, c. n. - air loop, persons. - facial, out. - purl, auxiliary. - auxiliary, trace. - next. What you need to pay attention to when reading the diagram:

  • knitting always starts from the first row;
  • on the designation of loops, that is, columns;
  • on the reductions on which the fit of the leg depends;
  • for raises, they are also crochets;
  • on the arches of the loops, they are used in openwork.

Some symbols on the diagrams are very similar, it is important to be careful not to get confused. Experienced craftswomen recommend first trying to make a small piece of canvas, and then proceeding to create the entire product. If for some reason it is not possible to count the diagrams, the rows go astray, difficulties arise with the description, then you can always look for video tutorials or turn to familiar needlewomen.

Video

Crochet boots are comfortable shoes for both indoors and outdoors. Their color and style can always be chosen to match the main clothing. Knitted boots came into fashion recently and are now at the peak of popularity. Each master class in this article will tell you in detail how different types boots. Schemes and descriptions will help to understand knitting even for beginner needlewomen.

Master class: openwork crochet home boots

Knitted boots with a pineapple pattern consist of motifs of different sizes. They are lightweight and easy to use.

For work we will need:

  • ballet shoes, which will serve as our basis;
  • 200 g of blue ribbon yarn;
  • hook number 1.6;
  • transparent glue for fabric

Description

To knit one boot, you need to complete 2 motifs for the front and arrange them in a mirror.

There are two halves for the sides, and one whole motif for the back. Next, we attach pineapples on the leg to see where and how much we need to knit CCH or RLS to fill in all the gaps

For a better fit of the knitted part to the ballet flat, you need to fold the last row in the toe area in half and knit the CCH by the sides.

We tie the upper and lower parts of the RLS, slightly tightening the lower rows, as if fitting them under the ballet shoes.

Optionally, knitted boots can be decorated with beads or beads. In order for the shoes to fit well to the leg, a caterpillar lace or just a chain of VP and 2 p. RLS.

How to make a pineapple pattern? We collect 14 VP and then we knit, as the diagram shows

Crocheted boots with corrugated bootlegs: video master class

Master class: crochet summer openwork boots

Beautiful summer boots with a fantasy pattern will be the perfect complement to a casual sundress or evening dress.

To knit women's boots, you need to prepare:

  • finished block;
  • glue for shoes;
  • insoles;
  • 200 g of pink threads (100% cotton);
  • hook No2;
  • decor.

Description

We tie the insole 2p. RLS.

We knit the back of the sole where the heel is with 10 rows of double crochets.

To tie a sock, we select in the center 10 we knit 2 p. RLS and 10 p. half-kami with a crochet. At the same time, we add 1 pet on each side and knit 2 side loops. Then, to the heel, we perform a fantasy pattern. Sew the joints of the toe and heel. Next, knit 21 rows (return rows, making lifting loops from the inside) openwork pattern to form the bootleg and finish with 2 p. RLS.

Scheme of an openwork (fantasy) pattern

We connect the knitted part of the boot to the block using shoe glue. The master class is over, crocheted knitted boots are ready.

Boots on the sole "Lily": video MK

Crochet women's ugg boots. Schemes and description

Uggs are men's or women's shoes, sewn from sheepskin so that the pile is located inside, and the smooth side is outside. Gradually, the name uggs was given to shoes that looked like cropped boots with thin soles, without a heel. Consider a master class on how to crochet women's ugg boots.

To knit ugg boots:

  • 250-300 g of semi-woolen beige yarn (optional, you can take white threads);
  • hook No. 2.5-2.7 and 3.5;
  • outsole or insole

Shoes in finished form should be 38-39 sizes.

Embossed pattern - every odd row we knit RLS, and every even row - CCH.

We start knitting uggs from the toe, which we perform with a relief pattern.

We collect 5 VP at the beginning of an even row, then 2 lifting VP, at the beginning of an odd one - 1 lifting VP. Next, we knit according to the diagram. In the 10th row we place a marker, from the side of the increase

To increase the ugg boots by one size, after the 17th row, it is necessary to knit 2 relief rows without increments, and then continue to knit according to the scheme, starting from the 18th row.

The second toe of the ugg boots is performed symmetrically.

From the side of the sole we tie 1 next to RLS - 1 st in the lifting loop of the odd row and 2 st in the pet. lifting an even row. You should get about 114 loops.

From the side of the boot we tie 1 next to RLS - 1 st-ku in a pet. lifting each row. We get 45-46 loops.

We turn to knitting puff.

We take hook No. 3.5 and knit in a circle using 2 pet. lifting:

  • 1r. - evenly add up to 60 CCH;
  • 2-4 p. - 60 CCH;
  • 5r. - we perform a uniform decrease up to 50 pet.;
  • 6-7r. - RLS crochet No. 2.7.

We knit rows 1-7 once, repeat 1-5, after which we change the hook to No. 2.7, we knit 1 row of CCH, 3 p. RLS and return to hook number 3.5. We knit 2 rows of RLS and fasten the thread.

Ugg insoles (2 pcs)

We collect a chain of 8 VPs, of which 2 lifting loops and knit according to the pattern of the CCH scheme. When moving from row to row, we knit 2 lifting loops together. If you need to increase the size of the insole, repeat the 7th row

We tie 1 p. RLS, and the sidewall of each row of 2SBN. In each loop of the first and last rows, 1 sc. At the corners we add 4 columns. You should get 114 pet.

We find or cut the sole of the desired size. With the help of an awl and threads, we connect it with a knitted insole.

We decorate ready-made uggs. The shoes are ready.

Slippers-boots from motifs: video master class

Master class crochet boots from hexagons

We knit motifs in the form of hexagons according to the patterns, starting with a chain of 3-6 VPs. Most often, several colors of yarn are used in the manufacture of one element. The size of each of the hexagons is calculated in advance, based on the size of the foot and the number of elements in the boots. For example, if the shoe consists of 6 motifs, then to determine its size, we measure the length of the foot (the distance from the big toe to the heel), divide the result by 2 and add 1 cm. So, for a foot of 24 cm, the diagonal of the motif will be 24/2+ 1=13cm

Hexagon knitting pattern

We knit the sole according to the scheme below:

The finished sole can be insulated and reinforced with felt and leather.

Let's move on to assembly. It is necessary to combine motives. This can be done in several ways:

1. Sew with thread;

2. Run single crochet stitches

3. Link an additional row of VP to connect the hexagons

4. Connect the elements back to back

We decorate ready-made crocheted knitted boots to your liking.

Openwork boots on the sole: video MK

Bright openwork boots for a hot summer

Consider a master class in knitting beautiful boots with floral decor

For work you need to prepare:

  • 200g yellow 100% cotton yarn;
  • remnants of yarn of different colors for decoration;
  • sole;
  • hook No. 1.5 and No. 2.5.

We tie the sole with 1-2 rows of RLS. Toe and heel perform CCH. In the center, for a pointed spout, select 7 loops and knit CCH to the required height. At the same time, in each row on each side we add 1 CCH, and on the very sole we knit 3 loops together. We knit the heel without increments. If the boot does not sit tight on the leg, then it is necessary to reduce the loops at the ankle level.

We knit the bootleg, as the diagram below shows.

Each flower is performed according to the scheme

When the decor is ready, decorate the main product with it.

Master class of beautiful crocheted high boots

Do you have a pair of shoes that have lost their look? I don’t want to wear it anymore, but it’s a pity to throw it away? Then this master class is for you. Let's give old shoes the right to a new, beautiful life.

What we need:

  • a pair of old shoes;
  • skein of yarn 50% cotton, 50% acrylic;
  • hook number 2.5;
  • long needle;
  • colorless glue;
  • starch

First we knit the lining on the toe of the sandals with single crochets. We perform the decrease by applying knitting to the shoes. It is better to reduce 2 loops in the first row, and 1 loop in the next.

It is more convenient to sew socks to shoes with a long needle in a circle. We hide the tails of the threads inside and carefully fill them with colorless glue

Now we knit and sew the back. We carry out strips of the required length and width. We make the place of rounding by knitting several columns together

KNITTED SANDALS "SUMMER"

For size 36-39

Required:

  1. Yarn PNK named after Kirov "Lotus". Composition: 100% cotton. Thread thickness: 250 m x 100 g Colour: 0103 Consumption: 60 g
  2. Hook number 1.5
  3. Knitting markers
  4. Scissors

Knitting patterns. Conventions

VP - air loop

Connecting p. - connecting loop

RLS - single crochet

CCH - double crochet

CC3H - a column with three crochets

Description of work

  1. Sole binding
  2. Knitting shoe upper
  3. Assembly: attaching the upper to the sole
  4. Sole binding

1. Prepare the finished sole for strapping: make holes along the edge of the perimeter to a depth of no more than 0.3 - 0.5 cm from the edge and at a distance of 0.8 -1.0 cm from each other.

Sew the holes with a needle or crochet through the “overlock” stitch with main yarn, starting from a point on the side equal to approx. 5-6 cm from the edge of the heel.


then 5 more rows of sc from the starting point of knitting to the same level on the opposite side.

At the same time, in each next row, shift the row by 3 sts towards the toe, knitting the first and ending the last sts in the row in descending order of height * RLS + 2 connecting sts *

In finished form, the height of the edge binding above the toe will be no more than 0.5 - 0.8 cm.

Mark the center of the toe with a marker.


2. Knitting top

With the main yarn, cast on a chain of 14 VP + 2 VP lifting and knit RLS, while at the BEGINNING of EACH row, after 2 lifting loops, perform 2 RLS with one center. Do not add at the end of the row. Thus, in each row, 1 sc is added.

After 30 rows, the workpiece will have a shape according to scheme number 1



Knit as follows:

1 row of straps: 4 ch lifts, perform a "Fan" of * 2 columns with three crochets (SS3N) with one center in the first extreme loop *, 1 SS3N in the next loop, 5 VP, RLS in the next loop, 2 VP, RLS in 3rd loop in the course of knitting, then the whole row * 5 VP (= chain), RLS in the 6th p., 2 VP, RLS in the 3rd p. *, finish row 4 SS3N in the last loop

2nd row of planks: 3 lifting VPs, RLS in the 3rd loop (i.e., in the “Fan” loop) of the previous row), then the entire row * 6 RLS under the “big” arch of 5 VPs, RLS under the arch of 2 ch *, finish row 3 ch, sc in the last p.

3rd row of planks: 2 lifting VPs, RLS in an arch of 3 VPs, then the entire row continuously * 7 RLS under each arch of VP *, finish row 5 RLS under the outermost arch of VP

4th row of straps: tie with a “crustacean step”.

Leave a long tail for later sewing.

Knit the second part of the top in the same way.

Dimensions of the top part in finished form:

height - approx. 13 cm

top edge width approx. 20 cm

The openwork bar is designed for a low instep of the foot!

Focus on your parameters and, if necessary, increase the number of loops when knitting arches from the VP and the RLS knitted in them to increase the width of the bar!

From the marker of the center of the toe in opposite directions, count 2.5 cm.

Baste the finished top to the binding of the sole and sew with a needle with a “machine” seam or with a vertical knitted seam with a thread of the main yarn. At the same time, along the upper edge, the side parts of the strap (i.e., “Fan”) are “stretched” and “stretched” sewn along the length of the extreme loops of the “Fan” itself.


On the heel knitted part of the sole, tie 1 next to the “crustacean step” or with a needle with a seam “over the edge”.

Master class from Temina's mother from Osinka

For size 37-38 I took the thread "Adelia"

And knitting needles number 2.5. Gained 15 loops (13 + 2 chrome.)

Now we begin to knit a toe, for this we knit as follows: chrome., 6 pet. garter stitch, yarn over, 1 person., yarn over, 6 sts. knitted, chrome

We make additions on both sides of the crochets, knit the crochets from the inside with a cross. pet. That's how it turns out

We knit until there are 49 loops on the needles, then we divide into 3 parts: 20 loops-9-20 loops.

And we start knitting the toe, we knit the toe like a heel on the middle 9 loops, capturing the side ones. We knit until the loops on the side knitting needles run out. It should go something like this

Now we begin to knit the side parts of our track together with the sole, for this we collect 16 loops on the sides, we dial after 1 loop, I immediately knit them

And then we knit straight, in my case 40 rows to the heel, not forgetting the first and last 7 loops to knit with a garter stitch. It should turn out like this

Now we knit the heel, do not forget to knit the last few rows in garter stitch.


That's all, design to your taste. I will be glad if my master class helps someone. Good luck!!!