DIY macrame pots for hanging pots. How to make beautiful pots for indoor flowers with your own hands, floor, wall, hanging, table? Macrame flower pots: a master class for beginners, weaving patterns, photos. How to buy floor

Many craftswomen ennoble their nest thanks to crafts made by themselves. Everyone loves comfort and peace in the house, at a party. Therefore, a planter made using the macrame technique for flowers can enrich your interior for the better.
As you know, the macrame style is quite common among do-it-yourself crafts, so it will be easy and simple for you to create your little masterpiece without leaving your home and with a little patience and time.
Not every person has a home size that allows you to place a hanging pot, or a bulky craft. But there are many alternative ways out of this situation with a small workspace in your living space. In the photo below you can see a compact and beautiful macrame planter for a flower pot.
The threads for your craft can be lengthened. Depending on how long the craft you need. The easiest way to connect a material that melts. If your threads are not so flexible, then you can tie them.
What will be the material - only your choice. It all depends on your desire and imagination. Of course, it is good if it is not easily soiled and durable. This will improve its performance. The material must be malleable. If you want to get a clear pattern, then you must weave the pots tightly enough. But basically, the future macrame planter, created for flowers, is entirely your choice.

We make flower pots using the macrame technique for flowers with our own hands

You will need:

Material - threads, about 20 - 25 meters.
Scissors
Working surface
Pins or paper fasteners

As you know, one of the most common knots is the double flat knot. It is not only easy to perform, but also beautiful. It consists of two simple nodes - right - and left. Schemes for the execution of such knots will not be difficult for a novice craftswoman.
Today, macrame is often used to decorate rooms and give them a more solemn look.
Initially, macrame was called knot weaving. And only in the last century they began to call the capacious word "macrame".

We fasten the thread on the support. They must have 4 ends. We put the right thread on top of the left, which in turn is located across the warp. We form a loop from the left thread. We stretch the end of the right thread under the base. We stretch it into the loop from the left thread. Slowly pull on the extreme threads and you get a knot. In order to weave the right-hand knot, we perform these operations in reverse. By tying these knots we get a double flat knot.

Thus, by continuing weaving, you get a support tape for pots. When the support tape is ready, take it as the basis for the pot. How to knit a planter will be clearer if you have a pot at hand. So it will be easier for you to navigate what size your macrame planter will be. There are many knots in the macrame technique. It will be useful to study the instructions for making some of them. For example, the Josephine knot will help continue the craft.

When you decide on the choice of the knot you need for your craft, tie a pot around them. Secure with a tight knot your product under the bottom of the flower pot. If you still have a thread, trim it with scissors and possibly fluff it.

Cache-pot is common as an interesting interior detail. It can serve as an unusual decoration.

For the manufacture of such decorative crafts DIY, you will need:

white cord
glass vase
Scissors
Scotch
Daisies artificial

We collect 8 threads and bend them in the middle.

We wrap them with another thread and fasten them.

We cut the thread with which we wrapped the assembled cords.

We divide the bundle of threads into 4 groups, in each of the bundles there are 4 threads.

We carry out weaving with a double-sided knot.

Tie the ends of the thread, cut and secure with a lighter. It is possible to decorate the tips with a brush. Attach the vase to your new planter and place decorative daisies inside the vase.

Video tutorials at the end of the article

You can find how to make a macrame planter with your own hands in the following video tutorials and master classes:

We make flower pots using the macrame technique for flowers with our own hands

You will need:

Material - threads, about 20 - 25 meters.
Scissors
Working surface
Pins or paper fasteners

Cache-pot is common as an interesting interior detail. It can serve as an unusual decoration.

To make such a decorative craft with your own hands, you will need:

white cord
glass vase
Scissors
Scotch
Daisies artificial

We collect 8 threads and bend them in the middle.

We wrap them with another thread and fasten them.

We cut the thread with which we wrapped the assembled cords.

We divide the bundle of threads into 4 groups, in each of the bundles there are 4 threads.

We carry out weaving with a double-sided knot.

Tie the ends of the thread, cut and secure with a lighter. It is possible to decorate the tips with a brush. Attach the vase to your new planter and place decorative daisies inside the vase.

Video tutorials at the end of the article

You can find how to make a macrame planter with your own hands in the following video tutorials and master classes:

No more room on the windowsill? This method will be of interest to those who cannot attach their favorite flowerpots even on the floor!

I really like the idea vertical gardening. And all because this method helps to save space with a lack of space and frees window sills and other horizontal surfaces from green spaces, and it also looks unusual, stylish and very beautiful.

And today's edition "So simple!" invites you to know interesting ideas how to do beautiful hanging flower pots using simple and affordable improvised materials. Now this is not a balcony, but a real garden of Babylon!

DIY hanging planter

And I'll probably start with macrame techniques, which, in my opinion, is most suitable for creating hanging planters.
Planters in this technique can be either very simple, which can be done literally in 10-15 minutes with your own hands, or complex - the result of many hours of work.

Therefore, I propose to practice first on the easier ones, honing your skills, and then move on to more difficult ones.
Hanging pots from metal baskets can be immediately filled with substrate, but in order to prevent moisture from passing through, coconut fiber must be laid on the bottom, and this will only improve appearance pots.
Great idea for crochet lovers!
A hanging planter made of straws will suit the interior with innovative touches. Just grab a pack of neon cocktail straws, some strong string, and get started. And even 15 minutes will be enough for this!
An old hoop, good glue, an unnecessary bowl - and in 20 minutes you are the owner of such an unusual and very stylish planter.
To do this, half of the hoop is placed vertically, a bowl is placed horizontally inside and points of contact are marked on the hoop. Glue is applied to them, a bowl is placed and kept until the glue hardens.
For creating hanging pots you can use a variety of materials at hand available in the house: baskets, buckets, bottles and even old balls!
And here are some simple master classes on the technique of weaving macrame.

I love these options!
The tree also gives a fairly wide range of actions, a variety of shapes and colors. Just choose what you like best and create!

And this is not even a planter, but a real shelf for flowers! Arm yourself with an old cutting board and strong threads, and so that the flowerpots do not fall and the board does not slip out, make small grooves along the edges of the board or secure the threads with a drop of glue.

I think this is an incredibly simple and yet quite elegant idea!

This hanging planter will wonderfully complement your home interior. It is done quickly and simply, the materials also will not take a lot of money.

To see the process weaving planters in macrame technique, I suggest watching this video.

This is a great hanging orchid planter idea! A decent result, while everything is quite simple and easy, isn't it?

I also suggest that you familiarize yourself with 6 wonderful ideas

When making a macrame planter for the first time, be sure to learn how to clearly perform a typesetting

The interior is made up of details. original vase hand made, handmade panels, napkins and tablecloths bring a subtle charm and warmth to the design. Graceful textile trifles will help to achieve stylistic completeness. Also, it is impossible to imagine a dwelling in which there are no fresh flowers.

Plants in pots help to merge with nature even within the walls of the house, they are the personification of life, a sip fresh air in the stone jungle. In an attempt to decorate the interior, to bring notes of warmth and comfort, to combine nature and applied art, the idea of a planter was born. Mastering the alphabet of macrame for beginners and patterns of weaving pots, you can create a beautiful and functional textile masterpiece on the first try.

Weaving rules

Macrame is a knitting technique in the form of various knots. Its homeland is the ancient countries of the East, Egypt, Mesopotamia, Assyria. Many believe that the knot writing of the ancient Incas is also a kind of prototype of the creative direction. Man learned to tie knots as soon as he appeared from what. Plant fibers, strips of animal skin, flexible and durable vines were used. Knotting skills made it possible to make clothes, knit fish nets and other devices to make life easier.

Example different types thick rope knots

It is believed that it was the sailors who perfected the craft, elevating the primitive knotting to the rank of a real art.

Macrame Basics

Knots at all times were assigned a special, and sometimes magical role. For example, newlyweds still tie their hands with a towel on wedding ceremony. Climbers will attest that a properly tied knot can sometimes save a life.

How to knit a square knot

The knot is the main element of macrame. Talented craftsmen brought a simple knot tying to new level, turning it into a sophisticated applied art. They honed their skills by creating openwork tablecloths, shawls, canvases for home decor.

Macrame loop knot

A combination of simple and complex elements and textured products are born today. One of the main advantages of macrame products is their extraordinary strength and durability.

Tatting knot in macrame

It is not for nothing that this technique of needlework is most often used for flower pots.

A few tips for those who start their journey in macrame:

Use cotton threads or high-strength cords, such as twine, for the warp. Wonderful hanging systems are woven from a thin nylon cord.
The function of the work surface can be replaced by a large hardcover book or a rectangular wooden cutting board.
To measure the width of the product without breaking the ceramic flower pot or ceramic flowerpot, you can use any metal dish with the desired diameter.
To weave a planter, beginners should practice knitting the simplest macrame knots.
Before starting work, you should calculate the load as accurately as possible. Too heavy flowerpots should not be placed in a pot.
If the thread unexpectedly ends, do not despair. It can be easily extended by gluing a new one.

In creativity, you can and should experiment. From original choice materials, synthesizing various techniques, depends on the originality and exclusivity of hand made products. Resourceful craftswomen use T-shirts as a basis, which are cut into thin strips. Knitted hanging systems made in openwork technique macrame, not only decorate the interior, but also increase its functionality, freeing up usable space on the windowsills or tables.

Starting to master the macrame technique, it is advisable to first learn how to perform simple knots according to schemes

We create beauty with our own hands

Choosing the material for knitting macrame knots, a lot depends on the imagination and wishes of the craftswoman. Creativity is a phenomenon that requires imagination, resourcefulness, and enterprise. Thanks to unusual ideas and discoveries of talented craftsmen, today macrame takes on the most unexpected forms. planter for indoor plants- a classic of applied art.

In the macrame technique, many beautiful things are made with which you can decorate the interior.

When choosing a weaving pattern, you should understand in advance which flower will be placed in the hanging structure. For climbing plants, you need to choose those schemes where all the beauty of the pattern is shown in a hanging support, because the descending plant will cover the entire openwork of the grid. Using macrame weaving patterns, following step-by-step master classes, even beginners can do the job.

A simple planter for small flowerpots

The creative process will require the main material, it can be cotton threads or twine.

For fixing, novice craftsmen can use adhesive tape. With the experience of weaving, all fixing elements will be only nodal.

From the tools you will need scissors with a sharp blade, mounting pins and a work surface. If you are weaving flower pots or any other product using the macrame technique, the process begins with knitting double flat knots. Not only is it easy to make, but it also folds into a beautiful pattern.

Products made using the macrame technique will not leave anyone indifferent with their elegance and beauty.

The algorithm for creating a simple planter:

We fasten the threads on the working support. There should be four ends. The right thread is placed on top of the left extreme, it is located across the warp.
We get a loop, then we draw the right part under the base, stretch it into the loop, slowly and carefully tighten the extreme ends. To tie the right-hand knot, we will do everything exactly, but we will start from the left side.
We knit two elements in mirror image, we get the first element of the pattern. We continue in the same way and weave the tape for the support of the desired length.
Weave the base. It is important to accurately measure the diameter of the pot so that it will firmly “sit” in the pots in the future. Having chosen the scheme of weaving the knot, we tie the pot itself, securing the work at the end with a tight knot under the bottom of the flowerpot.
If the thread remains, you can carefully cut or fluff it, giving the planter an original look.

A macrame product will become a useful interior detail, decorate the room, giving it a cozy look.

Hanging planter part 1

Hanging two-story planter part 2

Exquisite planter

In macrame technique, masterpieces are born, filled with luxury, grace and airy grace. They are appropriate in any stylistic direction. Wicker products will bring a special charm to the country and Provence setting. Do-it-yourself planters will help not only make the interior more comfortable and ennoble the atmosphere, but also decorate the plant itself.

We offer a master class for those who have already mastered the basic skills of art. To work, you will need a rounded glass flowerpot, a strong nylon cord of medium thickness, scissors and adhesive tape.

The work is as follows:

We collect eight threads, bend them in half to get the shape of a loop. We intercept the bundle with the ninth thread, wrapping it several times. We fix, and cut the rest with scissors.
Next, we conditionally divide the bunch of cords into four groups, each of them should have four threads.
We start weaving. The scheme of work uses simple twisted chains, flat mesh knots that hold the glass flowerpot, as well as square knots.
The main mesh is knitted with simple flat elements.
When weaving is completed, the ends of the threads are neatly trimmed. So that over time they do not fluff, you can scorch with fire so that they melt. Each end of the cord can be decorated with macrame brushes.

This planter can be used not only for flower pots. Products will decorate the room, balcony or terrace of the house, if you place transparent vases with flowers in them.

Openwork planter

The peculiarity of macrame is its simplicity and the fascinating process of knitting elements. In a matter of hours, you can create amazing things that will become original gift your home.

The art of weaving knots in Slavic culture was equated with pagan rites, because amulets and charms were made using this technique. In our time macrame art has become not only fashionable, but also a practical hobby. Modern masters combine weaving with decor of beads, rhinestones and semi-precious stones. Let's try and master this interesting technique on our own.

How to make macrame according to weaving patterns

Acquaintance with patterns of weaving macrame for beginners

Weaving in the technique of nodular weaving is possible not only for panels and hammocks. Craftswomen create earrings, necklaces, belts and lace to decorate clothing items.

First you need to decide on the quality of the threads for weaving and take into account a few nuances:

To work, you will need a board or a book in landscape format. Some craftswomen attach the threads to a special tube or a small diameter rod. But in order to weave knots in a canopy, some preparation is required.

Preparation before work:

Now on this blank you can weave the first training knots.

Knots and schemes for weaving macrame for beginners

A single flat knot consists of one loop. How to do this can be seen in the diagram.

A double flat knot is used for weaving - floss baubles - or other types of threads. Pay attention to the weaving sequence: each next knot must be a mirror image of the previous one. Otherwise, the resulting flat thread will begin to twist in a spiral.

From square knots, you can weave a rhombus, as shown in the diagram.

The number of nodes is measured in tens. We will look at the basic techniques with the corresponding schemes.

Knot chain.

Knot "chameleon".

Knot "tatting".

In the diagram, you can consider and test others, no less beautiful techniques creating nodes.

Schemes for weaving panels on the wall using the macrame technique (with step by step photos)

A wall panel is a great occasion not only to practice weaving techniques, but also the opportunity to create with your own hands original thing for the interior.

For the panel you will need:

10 threads of 5 m each; scissors;
a wooden plank 45-50 cm long (it will become part of the future panel).

Operating procedure:

Diversify your home decor create original jewelry You can also use "flowers from beads".

How to weave a macrame belt (master class for beginners)

For work you will need:

beautiful buckle with cross fastening for threads:
silk or synthetic threads - 3 pcs. 10 m each;
scissors.

Operating procedure:

first you need to master the weaving of a double flat knot with a central thread (you can choose a different color for the central thread);
attach the threads to the buckle, as shown in the figure;

to finish weaving, use the “diagonal bead roller” knot, as shown in the diagram;

Using this technique, you can weave a watch strap.

Scheme for weaving macrame for flowerpots (step by step for beginners)

Do-it-yourself weaving schemes for macrame flower pots are diverse and popular among craftswomen. Someone weaves a planter from the top edge, someone starts weaving from the bottom. Consider simple schemes for beginners.

For work and training use thread cut from old colored t-shirts. How to make such a yarn can be seen in the photo.

Scheme for weaving pots from below:

For work you will need:

8 blanks of threads, 2-3 m each (depending on the height at which you plan to hang the pot);
a flower pot; scissors.

Operating procedure:

According to the same pattern, you can weave a flower pot, starting from the top. To do this, you will additionally need a ring for attaching threads. The lower part can be tied with a common knot and make a second tier for the second pot.

Here are some examples of interior design with simple planters.

If you have a ready-made planter, but no fresh flowers, you can make your own hands - beaded trees -.

You can create many practical and sophisticated things from knots. Designer jewelry is highly valued, and the abundance of blanks for jewelry and decorative elements in needlework stores will allow you to create original pendants and earrings. Original - beaded bracelets - will be a worthy addition to the set.

To begin with, you can practice on simple patterns and weave, for example, a key chain. For additional decoration you will need large beads, a key ring and multi-colored cords. How to do this can be seen in the diagram.

Handicraft stores are a separate universe, once in which it is already impossible to leave without a purchase. —Beaded brooches — look exquisite and elegant, because no one else in the world will have such ones.

Pendants and necklaces can be made from any materials at hand. Lace, multi-colored threads and cords, multi-colored beads and openwork jewelry are used. The order of work and the scheme can be seen in the photo.

Video with a step-by-step macrame weaving tutorial for beginners

A macrame owl in the form of a keychain can become your friend, and simple circuit weaving will help to weave it in one evening. For the eyes of an owl, you will need several large beads. Have a look at other beaded craft ideas, maybe you will find new ideas for inspiration.

The technique of weaving a glamorous macrame leash and collar for your favorite dog is shown in a detailed master class. In this way, you can please your four-legged friend with your skills.

The video shows detailed master class on weaving a bag using the macrame technique according to a simple pattern. A detailed story about the choice of material and additional tools that you may need in the process.

Write how you like the idea of weaving original jewelry from macrame? We will be glad to any comments.