How to cut hair without scissors. How to cut hair beautifully - step by step instructions with photos for long, short, medium curls. Upside down cutting method

Visits to professional hairdressers who know their clients and their desires inspire and inspire, but there are also situations when hairdressers or beauty salons begin to bypass the 10th road.

We won’t list the reasons, let’s talk about how to cut the ends of yourself short or long at home: evenly or in a semicircle, cascade or ladder or flagella using step by step videos and a photo of the result, as well as scissors or cars. What does that require?

How to cut hair correctly? What tools make cutting easier? What haircut options to choose for home conditions?

We will analyze the options for cutting the ends of the hair, since it will be difficult to make a professional haircut right away.

Cutting the ends will help you start learning hairdressing, and we will analyze the examples and methods from the video, as well as the mistakes that beginners often make.

If suddenly you overdid it and shortened the ends or bangs too short, then we will reassure you and recommend adding vitamins and flaxseed oil to your diet, as well as applying masks with honey - all recipes and master classes are waiting for you.

Pros:

Minuses:

you need to purchase professional tools or suitable and very well sharpened;
responsibility for the result lies entirely with you;
cutting with blunt scissors will lead to a section of the hair;
mirrors (or dressing table) are required;

Photos and videos with instructions and step-by-step explanations

We invite you to learn from photos and videos, so you will see the whole process of cutting from and to, which will allow you to avoid mistakes.

Instructions for use:

Tip: cut off the 1st time the length is slightly less than we want, cutting off the excess is always easier than fixing the already cut.

Tools needed for cutting:

We will need: scissors, rubber bands, a hair straightener if your hair is curly, a comb with sparse teeth, 2 large mirrors, free 10-20 minutes, so that no one disturbs you, a broom and a dustpan to collect hair, a hair humidifier or just wet your hair in bath and squeeze lightly.

Tip: Put a towel over your shoulders to keep your hair from getting wet.

Remove carpets or other floor coverings beforehand to make the floor smooth: laminate, linoleum, or wood. Cover the floor with newspapers, if you don’t want revenge, it will remain so, just collect the newspapers and throw them away or burn them with your cut hair.

Cascade

This technique haircuts fit for home conditions, but not for salons or hairdressing salons.

Although, it is not inferior in terms of results to the salon, the truth will take many times less time and money. Let's get started!

Prepare for haircut: sharp hairdressing scissors, elastic, combs (one brush, the second with rare teeth), a mirror.

who already had

Comb the hair thoroughly with a brush and then with a wide-toothed comb.
Tie a high ponytail at the crown.
Make a straight cut parallel to the floor.

For lovers of torn haircut options, we suggest that you cut only with the tips, and not with the entire blade. This will allow the haircut to lie softer and smoother.

Trim the cut, if desired, profile with thinning scissors. The haircut is ready.

But if you didn’t like the cascade option, then we suggest watching 2 more videos with a more thorough study of the hair.

For curly

The principle of cutting is the same, but at the same time we will cut the ladder on the face and make it more visible for medium-length or long hair.

We will need:

Moisten hair under a tap or with a spray.
Comb thoroughly with your head down. Gather them up and trim the ends evenly. We make a cut with scissors at an angle and only with the tips.
For very thick hair separate a thin strand and align it until we make all the hair the same length.

If before you had a haircut without a ladder, then you will have to cut a little more length.

We focus on the shortest strand, but this is already for the experienced, for the first time cut along the longest, so that you can correct flaws in case of an incorrect haircut.

Following our advice, then you can fix it yourself or with the help of a hairdresser.

We divide the hair into a straight parting, combing the hair.

We cut the ladder in front like this:

We determine the strand, which will be the shortest and the beginning of our ladder.
We separate it and carefully comb it on the face. We put it parallel to the floor, stretching it to its full length. We cut with an even cut, but you can use the tips.
The second strand is cut in the same way, if you have very long hair, then just pull it out, and then, holding the ends with your fingers, cut it, bringing it closer to the face perpendicular to the ends with an even cut.
We repeat a similar ladder with the second side.
The result of such a haircut is a ladder on the sides and in front and a semicircle in the back.

Cascade haircut tutorial video

For long

What is the difference between cutting long hair and medium length or short hair?

The fact that it is easier to cut them on one side, you can simply take a strand and shift it to either side when you see your ends, which is extremely difficult to do with short ones, it is difficult to turn your hands in the right direction.

But cutting from behind or leveling the entire length is necessary not on a tiny area of \u200b\u200bthe floor, but by spreading a newspaper or collecting a carpet on a bare floor.

Katya Gor and Little Lily share these subtleties with you.

Features for long

Option from Katya Gor

Video blogger and hairdresser rolled into one, and also the owner of long and chic blond curls Katya Gor, she shares her secrets for cutting the ends with her own hands at home, and also tells and shows the result on her hair.

We need: scissors and spray with water.

Tilt your head down perpendicular to the floor, transferring everything to the front and carefully comb.
Lightly dampen with spray so they are slightly damp but not wet.

Important: the forehead and crown during the haircut should be directed straight to the floor.

We select the control strand and determine how long we will cut our ends. We cut off the necessary part.
We collect the hair and clamp it between the fingers, we cut it with teeth holding the scissors perpendicular to the cut and align it with the control strand.
Result: you should have a smooth ladder.
For those who love the ladder on the side zones. Select the side zones up to the ear, this is the zone with which we will work. Cut off holding between the fingers of the rounding and the ladder itself, moving from top to bottom.
The last step is to create a rounding at the transition from the ladder to the main mass, for this, cut it a little, giving a rounded path.
Refresh the bangs themselves, slightly cutting off the ends of it.

Video tutorial on how to keep the length of the hair and cut the ends in a cascade:

Thanks to this haircut, the tips are easily twisted even after wearing and unraveling a regular tourniquet. The temporal regions effectively frame the face, making appearance more groomed.

Ladder - deep triangle

This option has a higher level of difficulty, so ask your mom or a friend for help.

Carefully comb the hair and divide it into 2 halves in a straight parting.
Tilt your head perpendicular to the floor and cut off the control strand of the desired length - this is the closest to the occipital zone, repeat the same with the 2nd.
Check whether you cut the strands of the same length, if so, then we begin to equalize the rest of the hair along them.
We collect the hair between the fingers and carefully comb it, while we lower our fingers almost to the level of the control strand so that we can see where we need to cut.
Separate the front control strand and equalize the 2nd half along it. Similar method as described above. We cut with teeth.
We comb the hair alternately on 2 sides to check the quality of the haircut.
Optionally, we perform a short flight of stairs on the front strands (temporal zone). To do this, select a zone and cut off along the desired path.

The video will teach you how to cut the ends of a deep ladder in the shape of a triangle yourself:

Semicircle

We arrange mirrors or put a chair so that it is good to see what is happening behind you. Prepare everything you need as described above.

comb clean hair and tie a ponytail, tie the ponytail with elastic bands in several places so that the elastic bands are every few centimeters. You should get the last one 1 cm before the cut.
Cut off the planned centimeter. We recommend cutting parallel to the horizon, along these tips we will straighten all the other hair.
Let your hair down and comb it, dividing it along the parting through the entire head in the middle and lay it on your shoulders.
Find the strands that you cut, trim all the hair on one side and the other along them.

Check that the length of both strands is the same, for this, take strands and bring them together near the face.
We shift the cut hair back and check whether everything was done smoothly.
The main advantage of such a haircut is the exact observance of cutting off 1 or 2 cm, which sometimes the hairdresser does not understand. Minus: only a rounded edge.

Master class in the video cutting the ends in a semicircle from Lily Moon

Smooth

There are situations when the goal of cutting the ends is a horizontal, absolutely even cut, it is ideal to achieve it with a machine, but it is extremely difficult to do it with your own hands, especially from behind.

Comb clean hair and tie a ponytail, tie the ponytail with rubber bands in several places so that there are elastic bands every few centimeters. You should get the last one 1 cm before the cut or exactly in this place.
Cut off the planned centimeter. We recommend cutting strictly parallel to the horizon, along these tips we will level all the other curls.
Dissolve the hair and comb, collect the entire upper part of the curls into a ponytail or shell, leaving a thin strip in the occipital area. Divide them into sections.
Take the 2 back strands that you cut, transfer them forward to your shoulders and trim all the remaining ones on one side and the other along them.
Important: comb and align them, pull and fix between the fingers.
You will notice that the inner strands are several times shorter than the inner ones, now our task is to shorten the ends and make them even.
We shift the cut hair forward and cut all ends, but to avoid blunt cuts, cut with scissors towards the fingers, cloves, i.e. put scissors.

Tutorial video for trimming straight cut ends

Typewriter

This method is suitable when you do not have scissors or for some reason do not want to use them, but have a hair clipper.

Consider the option of a bob haircut, the model has hair below the shoulders, after the haircut it will turn out to be of medium length to the shoulders.

You will need: clipper, comb, rubber bands, scissors for trimming hair, mirrors.

Divide all hair into 4 parts: a straight parting in the middle and 2 above the ears in straight lines.
Tie 4 ponytails with rubber bands at the cut point, if in doubt, make 2 rubber bands and cut between them.
Be careful that the length of all ponytails is the same.
After that, under the rubber band, cut off the ends with a machine.
Align the transition between all the ponytails, smoothing the cuts with a typewriter. Additionally, we smooth out the transitions with scissors, checking on the control strand.
We check the quality of the haircut after washing the head and blow-drying.

The video will help you step by step to cut the ends with a machine, for example, a bob haircut

Short

The shorter the hair, the more difficult it is to cut it with your own hands.
Recommendation for cutting the ends of short haircuts, for beginners, contact the master.

If you decide to remove the increased length on your ears yourself or you don’t like the bangs, then we do it according to the instructions:

We find your haircut model in photo and video format, we need step-by-step actions.

Repeat after the master cutting part of the temples and bangs. For the back area, ask for help, because. it's extremely difficult to do it on your own.

Split ends - victory in 3 methods

Split ends bother both long-haired beauties and those whose length barely touches their shoulders. Therefore, learning to cut cut ends with your own hands is very convenient and practical.

Since each method proposed is aimed at maintaining the length, but at the same time, a thorough study by cutting off the split ends.

In all 3 cases, you will need: sharp scissors and patience, with more free time, the more it is needed, the more split ends you have.

Flagella

Sitting by the window on a sunny day, we twist the flagella from thin strands and slightly “fluff”, moving from the bottom up and cut off only the split ends, so we move in a row all over the head.

The thicker the flagella, the less ends you can process, so at first twist very thin ones, after the first such haircut, it is already recommended to make thicker ones the next time.

Since for the first time, if you carry it out qualitatively, then most of the cut ends will be cut off and after a month or 2 so many of them will not have time to grow.

3 finger clip

Ideal for those who are afraid to cut off extra centimeters. Double finger fixation, allows for more careful release and cutting of the tips.

Look at the photo above, where there are all 3 options, on the second you will see the placement of the fingers and the correct fixation of the strand, so you can not only fix, but also move.

Try this method, it may be the most suitable for you.

Pigtail

We braid thin pigtails and inspecting the weaving, ruffle and cut off the weak and dissected, so we process all the curls.

It is important to understand that any experiments with cars or scissors are a risk that is quite easy to fix, especially if you overdid it and now you are worried about the issue, then our article will help.

Often, mothers, and even schoolgirls themselves, are limited to only a braid or a ponytail, and now we propose to learn how to make a hairstyle for school for yourself in 5 minutes with photos and video tutorials, everything is described in detail.

The desire to have smooth and even curls is experienced by many girls, girls and women. We invite you to learn how to straighten your hair without an iron and a hair dryer at home quickly at

Child - girl at home

The methods are fast and very economical, which will allow you not to waste your time and money, as well as nerves trying to seat the child in a chair to the hairdresser and persuade him to sit straight and not move.

Suitable for both naturally curly and straight hair. The length is not important, which means it will perfectly help both long and medium length curls cut with a short flight of stairs.

Its main plus is that we keep the length completely, working only with the tips and removing poorly combed places.

For this method you will need: scissors, hair moisturizer, rubber bands - 4-5 pieces, combs, brush and with frequent teeth.

Instruction:

Comb hair thoroughly and moisturize.
Divide into zones and tie ponytails. The first zone is from the forehead to the beginning of the auricles. The second to the middle of the back of the head. The third is the remaining hair.
Collect each zone, tie it with an elastic band, then mark the places where the most short hair, along which we will make a cut. Be sure to moisturize even in the process of children's curls as they dry.
We make a cut, only we put the scissors not as in the video horizontally, but vertically cutting the ends, placing them perpendicularly with teeth.
We loosen the hair and check whether we cut the length evenly.

The training video clearly shows how to cut the ends of a girl on her own:

That's all for today, we hope that at least 1 method suits you.

Here are the options for how to cut the ends of your hair at home to yourself with video tutorials for beginners and those who have already done this more than once, but want to diversify their arsenal.

We wish you good luck in such a necessary and useful business for girls and women!

Many representatives of the beautiful half of humanity want to grow long hair, but often due to damage to the tips, this becomes almost impossible. Therefore, they have to sacrifice charming flowing curls for a fashionable haircut.

Actually you can choose less cardinal way - regular trimming of the ends of the hair, which is recommended to be performed approximately once every two to three months.

Cutting no more than 1-2 centimeters, you can achieve excellent results.

Firstly, peelable scales will no longer stick out inaccurately to the sides, giving the hairstyle an absurd look. Secondly, the hair shaft will be saturated with oxygen and nutrients, as a result of which the growth of curls will accelerate.

This The procedure is not particularly difficult so every lady can easily handle it on her own. All it takes is patience good comb and the right scissors.

Tools and facilities

For trimming split ends at home minimum hairdressing tools required- namely, a comfortable comb and scissors with perfectly sharp blades.

Scissors play a leading role here, so they need to be selected very responsibly, taking into account many parameters - shape, material, sharpening of blades, smoothness of opening and closing, manufacturing company, etc.

Gone are the days when there was only one classic form of hairdressing scissors. Today, for maximum convenience of haircuts, several shape options are provided - symmetrical, offset and semi-offset.

To be able to work comfortably and without the slightest fatigue, it is recommended to choose those models in which the rings are asymmetrical, that is, displaced - this significantly reduces the tension in the muscles of the wrists and fingers.

It is desirable that the scissors be equipped with a special stop for the little finger - this will allow you to apply a minimum of effort during the haircut.

The sharpness of scissors is determined by the angle of sharpening of this tool: the smaller the angle of sharpening the edge, the sharper its blades are. As a rule, sharpening from 40 to 50 degrees is used.

REFERENCE: In order for the scissors to be easily fixed in the desired position, they must open and close very gently and smoothly. To ensure the best cut quality, it is recommended to purchase a tool equipped with an adjustable screw.

The length of the scissor blades is also important. It is desirable that it matches the length of your fingers.

There is one a simple method for checking the quality and convenience of scissors. To do this, you need to hold the tool in a vertical position so that the ends are at the top. Taking the scissors by one ring, you should raise the ring of the second blade by 45 degrees, and then release it.

Be careful - with a quality tool, the blade will smoothly lower, but will not close completely, while there will be slight friction between both blades.

How to cut split ends at home?

In order for the self-cutting of split ends to be as successful as possible, it is necessary to properly prepare for this procedure.

First of all, it should wash your hair, dry it with a hair dryer, and if necessary, even straighten it using an iron.

How to trim split ends at home? In order to perform a perfectly even cut, it is necessary to divide the entire mass of hair into two equal parts. Then you need perform the following steps:

carefully separate the strand from one part of the curls;
moisturize the tips;
comb thoroughly;
firmly pinch the hair between the index and middle fingers;
cut 1-2 centimeters with sharp scissors;
repeat the procedure with all the remaining strands;
make sure the cut is perfectly even.

There is another way that allows get rid of split ends in one go. To do this, make a neat low tail, and firmly clamp all the ends of the curls in your fist. Now, without unclenching the hair, it is required to cut off all unnecessary with one or several precise movements. For this option, you need the sharpest scissors.

Exists a few secrets to make this procedure the most successful.

In order for hair to grow stronger, split ends should be cut in a perpendicular direction, and not diagonally.
The hairs will be impeccably beautiful and healthy if you cut about five millimeters above the incision site.
In order to clearly see all the damaged tips, it is recommended to twist each strand into flagella before cutting.
After shearing, twist the strand in the opposite direction and repeat the cut.
Once all the strands have been processed, you need to comb your hair, after applying a small amount of conditioner that does not require rinsing, this will show all the irregularities that should be corrected immediately.

If the hair is too dry or has been color-treated frequently, lubricate the ends immediately after trimming. nourishing oil- , or .

How to ensure proper care?

To prevent delamination of the tips in the future and save beautiful hair for a long time they need to be properly cared for.

Each time after washing the curls, it is necessary to apply a quality conditioner to their tips, selected depending on the type of hair - this procedure will provide good hydration.
It is important to keep moisture in the structure of the curls - for this it is recommended to use care products containing coconut, shea or olive oils in their composition.
Once a week, it is advisable to perform deep moisturizing of the hair using appropriate masks.
To reduce the risk of injury to wet hair, use a wide-toothed flat comb.
Minimize the use of thermal devices that negatively affect the structure of curls - a hair dryer, curling irons, etc.

Follow these simple rules and enjoy the perfect beauty of your hair.

Trimming split ends does not require special skills.. You only need well-chosen scissors and your own patience. Provide curls with full care with protection and hydration - and then they will grow healthy, strong and thick!

Useful video

How to get rid of split ends with scissors:

3 692 0 Hello! In this article, we will talk about how to cut the ends of your hair yourself, why it is done and how to carry out the procedure at home.

Every girl who takes care of her appearance and hair knows that they require regular care. One of the must-have items in hair care can be called a haircut. This procedure allows you to look well-groomed and healthy hair. There is also an opinion about the accumulated energy load, which is removed with a haircut.

Split ends must be cut without fail, since they are not cured, and the rest healthy hair may be broken if this is not done.

How often to trim the ends of your hair

The ends of the hair should be trimmed as soon as they become thinner or begin to split. If your hair is thin, then the ends become thinner faster, in which case it is recommended to cut your hair every 2-3 months. If your hair is thick and strong enough, then once every 3-4 months is enough.

How to cut the ends of your hair

You probably often ask yourself questions about how to save money and time spent on an expensive salon on hairdressing services, how not to depend on the opinion of the masters and choose exactly the length you want? One of the options for resolving the issue is to cut the ends of the hair yourself.

What you may need for this:

straight barber scissors suitable option with standard sharpening; stationery scissors will not work!);
thinning scissors for neat thinning of hair;
special hairdressing level;
two mirrors - large and smaller;
hairpins and elastic bands, you can buy clips;
straight comb with frequent teeth and brush;
spray bottle for water;
hair straightener;
hot scissors for split ends (such scissors are plugged in, only the blade heats up, when cutting, the tip of the hair is sealed, which allows it to retain moisture in it and prevent subsequent splitting of the hair).

Not all tools are essential for you. The choice will depend on which haircut method you choose and whether you want to give some additional effects or styling.

Method 1. Classic length alignment

This haircut method is suitable if you plan to cut your own friends or relatives with hair longer than average. It will be difficult to cut yourself in this way. Haircut can be done with both classic barbershops and hot scissors. The latter are effectively used to get rid of split ends.

Before cutting, the hair should be clean and damp, as well as completely combed. In the process, make sure that the head of the one being cut is kept level to achieve the desired level of length and evenness.
Start from the back of the head, separating a strand about 2 cm wide from the total mass of hair (with a high density of hair - 1 cm), fasten the rest at the top with a clip. Carefully comb the selected strand with a comb with straight, frequent teeth and cut the length as needed.
According to the resulting row, you can equalize by cutting off the remaining rows of hair, which should be separated in the same way as the previous row - in strips of 1-2 cm.
If the hair dries out, moisten it with water from a spray bottle. Rinse your hair again after cutting.

Since the hair is wet when cutting, keep in mind that after drying, their length will be slightly higher than when they were wet. As a result of such a haircut, you should get even hair of a single length.

Method 2. Head down haircut

If you want to decide on an independent haircut and cut yourself evenly, then choose this method! It works well for hair of any length.

Rinse and partially dry your hair, leaving it damp enough.
Comb your hair well with a comb from a head down position.
Carry out a haircut with classic scissors, remaining in the same position - the head is lowered, the hair hangs straight down. No strands are separated.
Keep your hair cut as straight as possible, periodically combing your hair to check. It is desirable that at the same time you can see your hair and the result of your labors. The recommended cutting direction is from left to right.

To minimize post-process cleanup, place polyethylene, paper, or cloth in the cutting area before cutting, which can then be disposed of.

Method 3. Specialized level alignment

There is a special barber level for those who like to cut their own hair. In salons, such a tool is usually not used. The level is a clip of a compact size, there are levels for bangs (smaller) and for the main volume of hair.

Haircut with such a tool is well suited for straight hair. If your hair is curly, it is better to straighten it first. For example, using a special ironing.
On the head, exactly in the middle, make a parting, dividing the entire volume of hair into 2 parts.
Connect the right and left parts of the hair under the chin and put on the level so that it is kept even, horizontal and at a height corresponding to your wishes for the subsequent length of the hair.
Cut the length along the bottom edge of the level, consider this moment when installing it.

To shorten the bangs with a level, fix it on it. Installation can be either straight or oblique, depending on your wishes. Take off the length also along the bottom edge of the level.

Method 4. high tail

This method will allow you to quickly make yourself a haircut cascade, which has been popular among Russian fashionistas for a long time. It allows you to favorably emphasize the features of your face. Cascading haircut is suitable for straight and curly hair.

Before the haircut, the hair should be clean and slightly damp and always well combed.
Gather your hair in a ponytail in the immediate vicinity of the forehead (at the crown). Fix the tail with a thin elastic band. It should be a special hair band, stationery rubber bands will not work, they can ruin the hair. Also, the tail can be fixed with a hairdresser's level.
Cut off with scissors in the resulting tail the length you planned.
If the hair is thick, do not completely grab the entire ponytail to avoid bumps in the haircut, and also profile the ends with special scissors. This will give your hairstyle extra lightness.

Method 5. low ponytail

This is one of the most simple ways to remove a small length of your hair yourself with your own hands.

Carry out a haircut on clean and well-combed hair.
Gather the hair at the back of the head at the very bottom, at the neck, exactly in the middle. Firmly fix the tail with a hair band, a thin one will do. The tail should be tight and smooth, nothing should stick out.
The resulting tail can be moistened with water from a spray bottle and combed well.
Perform additional fixation of the tail with thin hair ties, tie them at the same distance from each other - every 2-3 cm. The last elastic band should be located at the level to which you want to shorten your hair.
Cut the hair evenly under the last elastic band. Use classic scissors, but if your hair is very split, then such a haircut can be done with hot scissors.

This is a very simple method that takes a minimum amount of time and gives good result in the form of beautiful well-groomed hair.

Method 6. Twisting into a tourniquet

To give your hair lightness and playfulness, use this simple method It won't take long either.

Before cutting, make sure your hair is clean and well-combed. They can be washed in advance, this haircut does not have to be done on wet hair.
Lift all combed hair to the very top of the head and twist into a tight tourniquet. If hairs remain behind, fall out of the common tourniquet, it's okay, leave them.
It is not necessary to fix the tourniquet with clamps or elastic bands, hold it firmly with one hand above your head. With the other hand, cut the desired length, then release the hair and comb it carefully.
Gather your hair back into a similar bundle, but now twist it in the opposite direction. Again, you don't need to fix it. In the resulting tourniquet, cut off those hairs that will stick out.

This method is perfect for long and medium length hair.

Method 7. Two tails below

This solution will help to save maximum time for the haircut process.

Divide clean combed hair into a parting so that you get 2 identical parts of hair on the left and right.
Fix the resulting halves tightly on the sides into tails with thin hair ties. Lower the elastic to the length you plan to cut.
Make a cut under the elastic bands from the edge to the center. To make the edge of the hair look as natural as possible, try to tilt the scissors at an angle of about 45 degrees when cutting.

After cutting, wash your hair in warm water with shampoo, if you need to save time, dry it with a hair dryer using a brush. As a result, the back haircut will have a V-shape.

Method 8. "5-6 tails"

This is a rare haircut method, it will take a little more time and patience, but the process will undoubtedly bring you pleasure.

Before cutting, your hair should be clean and damp, but not damp.
We divide the head into 6 zones:
- occipital - hair below;
- bangs (if you have one);
- 2 equal parts at the top of the head on the left and right, and 2 similar parts up to the occipital zone.
If you don’t have bangs, then there will be only 5 zones.
Secure each zone in a tight tail with rubber bands.
Use straight scissors to cut the ends to the desired level. Cut the same length from each tail (except for the bangs).
The hair loose after this haircut can be slightly trimmed with thinning scissors and once again see how the bangs lay down. If necessary, further trim it with straight scissors or profile.

Before choosing one or another method, be sure to watch the following video.

Detailed video instruction on how to cut hair evenly. Tips combine all of the above methods.

To be fully prepared and do everything right, we offer a few more useful tips:

If you want the haircut effect to last for a long time and your hair grows more slowly, then cut it on a waning moon, if you want it to grow faster on the contrary, then on a growing one. Therefore, cutting the ends of the hair is acceptable even if you grow your hair.
Read:
To see how the hair lay down after the haircut, whether everything was done smoothly or to control the quality of the styling will help the second mirror. Take a medium-sized mirror and place it behind your back, find a position that allows you to see the back of the haircut in the main mirror.
For self haircut you can use a hack to visual aid: dark hair cut on a light background, and light - on the contrary.
To reduce split ends, position straight hairdressing scissors at an angle of approximately 45 degrees. If you have hot scissors, then it is better to use them.
If the ends split, then cut the length about 2-3 centimeters higher from the place where the hair begins to split.
Another method of removing split ends is to twist the hair (in small parts) into small dense flagella, cut off the hairs protruding from the bundle with ordinary hairdressing scissors with good sharpening. And so on in turn all over the head.
If you are cutting curly hair, then before cutting they should be moistened much more intensely than straight ones.
Cut the length of the bangs depending on the speed of its growth, the approximate frequency is 1 time in 1-2 months. So that it looks aesthetically pleasing and does not interfere with your review, does not get into your eyes.

How to trim your ends less often

Try to use less curling irons, irons and hair dryers, because. they damage the structure of the hair. The tips are the first to take the hit: they dry out, become thinner and, as a result, need regular trimming.
Don't use tight rubber bands.
Moisturize and nourish your hair with a bowl. Also use hair conditioner.
Do not wash your hair with hot water.
Use shampoos according to your hair type and for split ends.

Hair care requires a lot of time and financial costs.

But they can be reduced if you dare do your own haircut, at home - do not let these words scare you.

Are you a successful busy woman and don't have time to book a haircut at a salon, or you simply don't trust your hairdresser with your hair? If you are not afraid of such experiments - you can cut your hair at home.

Some Tips For those who decide to do this:

To get started, buy hairdressing scissors(usually, they are very expensive, so it’s better to choose an option that fits your pocket, the main thing is that they are always sharp).
Also for a haircut at home is necessary a thick comb and a few hairpins.
Decide on long hair before and after haircut. Can take a ruler.
Required for a haircut large mirror, to which you need to turn your back, as well as a mirror into which you will directly look.
To start ( first haircut) you can try the most simple hairstyle- the same length around the entire circumference of the head.
Before cutting hair - first need to be washed but not dried.
If you have blonde hair - cut them on a dark background so that all the nuances can be seen, if dark- on the contrary, on a light background.

Cautions:

do not use scissors for cutting for other purposes;
for the first time don't choose too complicated haircut;
in order to make a cascading haircut, you need to purchase thinning scissors;
cutting wet hair, keep in mind that when dried, they become a little shorter;
blunt scissors leave "split" ends.

Benefits of a home haircut:

This is a great way to save time and money;
You can also do exactly what you planned with your hair (if possible);
You have the opportunity to change your image at any convenient time.

Cons of a home haircut:

From the first time, not everything will turn out well;
Secondly, you will have to clean the hair in the room where the haircut was done;
This may take a long time.

As mentioned earlier, you need scissors. Ideally, take the usual (sharp) and thinning (but you can do without them even with a cascading haircut). Also a few hairpins (clips) or elastic bands.

Sit in front of a mirror and lay the tool out in front of you so that it is convenient to take it at any time.
If you're a little nervous start cutting from the bottom strands- they can be covered with upper strands, if suddenly something goes wrong.
Also, to make cleaning easier, you can spread the cloth on the floor. This will save a lot of time.

So, let's get straight to the haircut.

The most difficult haircut is a cascade

First you need to decide on the length all the "components" of the cascade. After that, you can immediately proceed to the haircut.

In the right hand (if you are left-handed, then in the left) we take scissors, in the left - a strand of hair. Choosing a strand, twist it into a tourniquet.

Needs to be cut very carefully, cutting off only the part of the hair that is on top. Then it is recommended to stab the strand so that it is more convenient to cut the rest of the hair.

But there is another exotic, but simple, like everyone else ingenious way to make a cascading haircut- collect hair in a regular ponytail ... on the forehead. After that, decide on the length and just cut straight.

Comb your hair without removing the elastic to check if there is any uncut hair left. When you remove the rubber band - you will be pleasantly surprised how easy and fast they made such a complex haircut on their own at home.

How to cut the cascade at home? Watch the video tutorial:

How to cut your hair under the caret?

As with any haircut, wet hair and sharp scissors required. Choose the length of the caret, and divide the hair into several main parts: temporal, occipital and crown zones.

We also select strands and, pulling a little, cut off the required length. But important to remember that it is undesirable to pull the hair strongly, because after drying they will still lie down as they grow.

You need to start cutting from the front., gradually moving towards the occipital and crown zone. Hair should be kept parallel to the floor, this will make it as easy as possible to make an even haircut.

After you've cut your hair, dry and style your hair. Firstly, because the bob requires styling and care, and secondly, it will help you notice the long lonely hairs that you missed when cutting.

Trimming the ends of the hair

A very important aspect of care behind the hair is cutting the ends of the hair. It is done to prevent split ends of the hair, as well as to ensure that they (hair) grow better.

The procedure is not difficult at all. does not require much time and effort. It will take much longer and more expensive to do this in the salon, where you still have to queue and waste your time.

Therefore, we bring to your attention a few tips how to trim the ends at home with a minimum of effort, moreover, with a huge time saving.

Grab a section of hair with two fingers of your left hand and pull it to the length you want to leave. All that remains behind the fingers just cut off sharp scissors.

If you have curly hair, then you need to pay a lot more attention to the length you want to cut. After all, you need to take into account that after the hair dries, they will become much shorter (you need to be especially careful with bangs).

Video tutorial on how to trim the ends of the hair itself, look at the video:

The most important advice in any case, whether it's a cascade, a bob, or just trimming a bang, it's not like cutting too long strands right away.

Haircut check

Everything is quite simple here - drying and styling. It is advisable not to use for the first time, no styling products, especially heavy ones (wax, varnish). If the hair is very naughty - use light mousses, they do not weigh down the hair and allow you to maintain natural volume.

After installation take a thick comb and thoroughly comb your hair. In this way, you will get rid of cut hair that is tangled, and you will also see (if any) strands of different lengths or simply missed hairs that can be easily cut pointwise.

If you are concerned, you can contact to a specialist for advice. We wish you success!