Do-it-yourself gusle from Dunno costume. Child development, patterns for fancy dress. DIY Dunno hat: paper and fabric
Dunno
Character: Dunno is the hero of a series of books by Nikolai Nosov. This mischievous boy does not want to put up with the fact that everyone considers him a stranger.
Costume: The author of books about Dunno, Nikolai Nosov, describes his costume in detail: “Dunno wore a bright blue hat, canary yellow trousers and an orange shirt with a green tie.” Of course, the character will exactly match his description in the book. if there are yellow trousers and an orange shirt in the child’s wardrobe. But if there aren’t any, then don’t despair: any other bright and preferably contrasting-colored trousers and shirt will do. But you can’t do without a wide green tie and a blue hat! But... everything is in order!
Shirt: draw a pattern on paper (see Fig. 11 “Drawing of Dunno’s shirt and trousers”) and transfer it to the fabric using a piece of soap, pencil or tailor’s chalk. Remember that the pattern is given without seam allowances and when cutting you need to add 1 cm on each side. Cut out the details of the shirt. Overcast the middle back seam. Sew the right and left sides of the back, leaving an opening for the fastener. Iron the seam. Sew shoulder seams. Overcast shoulder seams. Sew the main part of the jacket with sleeves and overcast the seam. Sew the side seam of the jacket and the bottom seam of the sleeve at the same time and overcast. Fold the bottom of the jacket and sleeves. Sew a button and loop to the back of the cut under the fastener.
From the same fabric as the shirt, cut out the collar - four identical parts, since it consists of two parts. Place them face to face and stitch along the edges. Turn each part of the collar inside out and iron. Place the collar on the neckline and stitch. Dressmakers with at least a little experience can hide the neckline between two parts of the collar.
Pants: Cut out of yellow fabric, having first drawn a drawing on paper (see Fig. 12 “Drawing of Dunno’s shirt and trousers”) and not forgetting to add seam allowances. Sew the crotch seams and overcast them. Sew the middle seam and overcast it. Fold the top cut (waistband) and the bottom. Cut the straps from the same fabric as the pants, fold the strap parts in pairs face to face and stitch along the edge, leaving space for turning out. Turn the straps right side out and iron. Sew the back end of the straps to the trousers, sew loops on the front of the straps, and sew buttons on the front of the pants.
It may very well be that in the closet of a stylish grandfather in the past, there was exactly the kind of tie lying around that was needed for a suit. If not, then it can be easily made from a piece of bright green fabric. To do this, you need to draw a tie pattern on paper
(see Fig. 12 “Drawing of Dunno’s hat and tie”), and then cut out two identical parts from the fabric. Remember that patterns are given without seam allowances (1 cm on each side). Then fold the parts face to face and stitch along the contour, leaving a 5-7 cm long slot at the narrow end of the tie. Turn the tie right side out through the left slot. Sew the slit neatly from the front side, trying to ensure that the seam is not visible. Iron the finished tie. Fold the top end of the tie along the fold line and stitch the edge on the wrong side. Thread an elastic band into the resulting hole, adjusted to the circumference of the child’s neck.
Rice. 12. Drawing of a shirt and trousers Dunno---------------Rice. 13. Drawing of Dunno's hat and tie
A simpler method is to make a tie from paper. To do this, you need to draw the outline of the tie on paper up to the fold line. The tie can be immediately cut out of green or white paper and then painted. Remember that the paper must be thick enough to withstand the holiday and not wrinkle or even tear prematurely. Pin the finished tie to the shirt collar with a safety pin or sew on it.
Note: To obtain deep, bright color, it is better to use gouache. To prevent the surface painted with gouache from being smeared, you can add PVA glue to the paint in a 1:1 ratio.
The hat can be made from whatman paper, having first let it rest under a press so that the finished hat does not roll up. A drawing of the details of Dunno's hat is given in Fig. 13. The brim of the hat and the base (crown) should be blue, with zeros on both sides. Glue the base of the hat along the side allowance. When cutting out the brim of a hat, it is necessary to add a gluing allowance along the inner circumference of the part 1 cm wide and cut it. ("apply glue to the allowance for gluing the brim of the hat and glue them to the main part so that the allowance is on the wrong side of the hat. Paint the hat or cover it with blue paper.
Note: For gluing paper parts, it is better to use IVA glue or a glue stick. Regular office glue leaves sloppy, glossy spots on paper, so it’s best not to use it.
Glue a tassel to the top of the hat, which is done as follows: a sheet of paper (preferably corrugated) is cut into strips, not reaching the edge, and rolled tightly at the uncut end, secured with thread or tape.
Dunno’s mischievous swirls can be painted on the hat with yellow paint (see Fig. 13 “Drawing of Dunno’s hat and tie”) or cut out of not very thick paper, painted yellow, “curled” with scissors or a pencil, and then glued to the hat .
Character: Dunno is the hero of a series of books by Nikolai Nosov. This mischievous boy does not want to put up with the fact that everyone considers him a stranger.Dunno costume for a holiday at school. Do it yourself and for free.Costume: The author of books about Dunno, Nikolai Nosov, describes his costume in detail: “Dunno wore a bright blue hat, canary yellow trousers and an orange shirt with a green tie.” Of course, the character will exactly match his description in the book. if there are yellow trousers and an orange shirt in the child’s wardrobe. But if there aren’t any, then don’t despair: any other bright and preferably contrasting-colored trousers and shirt will do. But you can’t do without a wide green tie and a blue hat! But... everything is in order!
Shirt: draw a pattern on paper (see Fig. 11 “Drawing of Dunno’s shirt and trousers”) and transfer it to fabric using a piece of soap, pencil or tailor’s chalk. Remember that the pattern is given without seam allowances and when cutting you need to add 1 cm on each side. Cut out the details of the shirt. Overcast the middle back seam. Sew the right and left sides of the back, leaving an opening for the fastener. Iron the seam. Sew shoulder seams. Overcast shoulder seams. Sew the main part of the jacket with sleeves and overcast the seam. Sew the side seam of the jacket and the bottom seam of the sleeve at the same time and overcast. Fold the bottom of the jacket and sleeves. Sew a button and loop to the back of the cut under the fastener.
From the same fabric as the shirt, cut out the collar - four identical parts, since it consists of two parts. Place them face to face and stitch along the edges. Turn each part of the collar inside out and iron. Place the collar on the neckline and stitch. Dressmakers with at least a little experience can hide the neckline between two parts of the collar.
Panties: Cut it out of yellow fabric, having first drawn a drawing on paper (see Fig. 12 “Drawing of Dunno’s shirt and trousers”) and not forgetting to add seam allowances. Sew the crotch seams and overcast them. Sew the middle seam and overcast it. Fold the top cut (waistband) and the bottom. Cut the straps from the same fabric as the pants, fold the strap parts in pairs face to face and stitch along the edge, leaving space for turning out. Turn the straps right side out and iron. Sew the back end of the straps to the trousers, sew loops on the front of the straps, and sew buttons on the front of the pants.
It may very well be that in the closet of a stylish grandfather in the past, there was exactly the kind of tie lying around that was needed for a suit. If not, then it can be easily made from a piece of bright green fabric. To do this, you need to draw a tie pattern on paper
(see Fig. 12 “Drawing of Dunno’s hat and tie”), and then cut out two identical parts from the fabric. Remember that patterns are given without seam allowances (1 cm on each side). Then fold the parts face to face and stitch along the contour, leaving a 5-7 cm long slot at the narrow end of the tie. Turn the tie right side out through the left slot. Sew the slit neatly from the front side, trying to ensure that the seam is not visible. Iron the finished tie. Fold the top end of the tie along the fold line and stitch the edge on the wrong side. Thread an elastic band into the resulting hole, adjusted to the circumference of the child’s neck.
Rice. 12. Drawing of Dunno shirt and trousers ---------------Fig. 13. Drawing of Dunno’s hat and tie
More simple is method of making a tie from paper. To do this, you need to draw the outline of the tie on paper up to the fold line. The tie can be immediately cut out of green or white paper and then painted. Remember that the paper must be thick enough to withstand the holiday and not wrinkle or even tear prematurely. Pin the finished tie to the shirt collar with a safety pin or sew on it.
Note: To obtain a deep, bright color, it is better to use gouache. To prevent the surface painted with gouache from being smeared, you can add PVA glue to the paint in a 1:1 ratio.
hat can be made from whatman paper, having first let it rest under a press so that the finished hat does not roll up. A drawing of the details of Dunno's hat is given in Fig. 13. The brim of the hat and the base (crown) should be blue, with zeros on both sides. Glue the base of the hat along the side allowance. When cutting out the brim of a hat, it is necessary to add a gluing allowance along the inner circumference of the part 1 cm wide and cut it. ("apply glue to the allowance for gluing the brim of the hat and glue them to the main part so that the allowance is on the wrong side of the hat. Paint the hat or cover it with blue paper.
Note: For gluing paper parts, it is better to use IVA glue or a glue stick. Regular office glue leaves sloppy, glossy spots on paper, so it’s best not to use it.
To the top of the hat glue the tassel, which is done as follows: a sheet of paper (preferably corrugated) is cut into strips, not reaching the edge, and rolled tightly at the uncut end, secured with thread or tape.
Naughty whirlwinds of Dunno You can draw it on the hat with yellow paint (see Fig. 13 “Drawing of Dunno’s hat and tie”) or cut it out of not very thick paper, paint it yellow, “curl” it with scissors or a pencil, and then glue it to the hat.
Dunno costume for a holiday at school. Do it yourself and for free.
Many people know this popular character. A good-natured but stupid guy managed to interest many children in his time. More than one cartoon and more than one book have been published about the adventures of this guy. Of course, we are talking about Dunno, a character from Nikolai Nosov’s books. So, the author himself told how Dunno dressed. That is why creating a costume for such a popular character will not be difficult. The main attribute of Dunno is his big hat. He wore it in bright and blue. At the same time, Dunno wore canary-colored trousers and an orange version of the shirt. All this fit with a green tie. The peculiarity of Dunno was that he appearance was filled with the most different colors and interesting additions. In order to recreate a beautiful and interesting appearance, you should use any bright clothes and complement the appearance of your know-nothing with a variety of elements.
To make a Know-Nothing shirt, you need to draw up a pattern on paper for your hero. It can be transferred to fabric using portable elements such as tailor's chalk. The pattern is given in an imprecise form, therefore, you should make indents along the edges of one centimeter for subsequent processing. Then, you need to cut out the details of the shirt and make the necessary cuts for the middle back seams. Next you need to stitch the left and right sides of the back, leaving a slit for the fastener. Next, you need to iron the seam. Next, you need to sew the seams for the shoulders. Then, sew the main parts of the jacket with sleeves and overcast the seams for stitching. Sew the side seams using the jacket and the bottom seams of the sleeves, preferably doing this at the same time. Then, you need to overcast these elements. Next, you must adjust the bottoms of the jacket and sleeves. Next, you need to sew your button onto the cut of the fastener. Thus, the main costume of the hero will be ready. The costume can also be supplemented with various elements and make the hero’s appearance more mischievous and varied. Complete your suit with the most different things. You can cut pieces of fabric from a shirt and replace them with other pieces of fabric, sewing careless claps in place of empty holes. As a result, you will get a very interesting and beautiful Dunno costume, which can be used for traditional holidays of Russian fairy tales, use these costumes for school holidays or matinees. Making such a costume is quite simple, but at the same time it must be complemented and supplemented with additional elements. Thus, the Dunno costume will help you make any holiday more atmospheric.
Comments
Related posts:
Delightful baby suit“Rose” with our own hands. We make an original costume for any occasion with our own hands, simply and free of charge. Ninja costume for party. Cutting and photo of a suit with your own hands. DIY monkey mask and costume. Symbol of 2016.
Many parents want to please their children with beautiful carnival costumes. There are simple outfits that you can make quickly enough with your own hands, even without any sewing experience. One of these outfits is the Dunno costume, the main element of which is a hat.
What is needed to make a Dunno hat?
Dunno is a very smart and brave character. He constantly ends up in different interesting stories and never loses heart. Many children would like to be like him. For a quick transformation, you can wear exactly the same hat as this fairy-tale hero. We list the materials that may be needed for its manufacture:
- thick cardboard blue or white, with the ability to paint it (whatman paper);
- a piece of blue fabric;
- scissors;
- glue;
- Double-sided tape;
- isolon;
- gouache or other paint;
- brush;
- colored paper;
- sewing supplies.
Important! The first step is to decide on what basis the hat will be made. Cardboard is most often used.
How to make a Dunno hat with your own hands: detailed instructions
You can quickly make a base for a hat out of cardboard. It consists of two main parts: a circle and a cone. Let's look at the process step by step:
- First you need to prepare whatman paper or cardboard. If they were folded into a tube, then they should be placed under a press or, for example, several heavy books for several hours;
- Draw an even circle on cardboard with a diameter equal to the volume of the child’s head. To do this, you can measure it with a measuring tape. If you are afraid of making a mistake, then it is better to do a little less. If the head does not fit, then the circle can always be expanded;
- We make allowances for the brim of the hat of about 20-25 cm or wider. The main thing is that in the future they do not interfere with the child’s activity. After all, the main goal of the holiday is fun and participation in all kinds of games and competitions;
- Next, we draw a cone with a mandatory allowance to connect it to the fields;
- We connect the cone and the circle to each other using glue so that the allowance is on the wrong side;
- It is better to paint the details of the headdress both before making it and at the very end. The fields must be painted on both sides. You can also cover the hat with colored paper.
Attention! To work with paper and cardboard, it is recommended to use PVA glue or adhesive pencil. When carefully glued, they do not leave stains or streaks. It is better to immediately remove any remaining glue with a clean soft cloth or cotton pad.
You can also sew a beautiful hat from fabric. Crepe satin is perfect for these purposes. You will need interlining and isolon. Let's look at the process step by step:
- We cut out the necessary details. You will need 2 field pieces made of crepe-sanitine and one field piece each from non-woven fabric and isolon. We cut out 2 parts of the cap from satin and 1 part from isolon. We also cut out strips for the brush from crepe satin and isolon in the amount of 10 pieces. The principle of the pattern is exactly the same as in the paper version;
- We glue one of the details of the fields with non-woven fabric to give it greater strength;
- On the part with a layer of non-woven fabric we place the part made of isolon and secure it with pins;
- Using a pencil and a long ruler, we draw peculiar rays that should extend from the center of the workpiece perpendicular to the margins. The distance between them may vary and is determined at your own discretion;
- Next, we stitch on a machine along the pre-drawn lines;
- We fold the resulting part with the second element made of crepe-satin, pin them together with pins and connect the parts using a typewriter;
- To make the product look neat from the front side, cut off the excess isolon from the allowance with scissors;
- We turn the brim right side out and prepare it for connection to the cap. To do this, it is necessary to create additional tension on the duplicated part. This will allow the fields to have stable form and do not bend;
- We make parts for the brushes. This can be done in various convenient ways. We sew them to the cap in advance;
- We connect together two parts of the cap - from isolon and crepe-satin. We stitch their sections on a machine;
- We cut off the brim and cap with the right sides using pins. For strong fixation, it is better to place pins vertically. Next, we stitch this section on a machine;
- Next, we sew on the inner cap. This is done for beauty and wearing comfort. When making a product in a hurry, you don’t have to do the internal part;
- We sew on an elastic band so that the hat is easy to take off and put on.
Additional elements for decoration
An additional striking element to create a more believable headdress is the hair of this hero. They can be easily and quickly painted using yellow paint on the product itself. You can also use colored paper or plain paper, painting it yellow in advance. Need to cut strips different lengths. You will get unique strands of hair. Next, they need to be curled with a pencil and glued to the inside of the hat.
You can quickly create an interesting hairstyle thanks to the applique. To do this, you should make blanks from the material yellow color and glue them to the headdress. You can also sew them onto the fabric in advance if the hat will be fitted to it in the future.
You can also glue a tassel to the top of the product. From a leaf corrugated paper cut the runners and, not reaching the end, roll them up at the uncut end. Then secure with thread or tape.
Thus, you can make a spectacular and bright hat for the main character on your own in one evening. This headdress is suitable for both children and adults for any costume event.
The time before the New Year is a series of pleasant chores associated with the upcoming holiday. Buying gifts for relatives and friends, thinking about the menu, and, of course, children's matinees in kindergartens and schools. And you always want your child to look no worse than the rest, which means it’s time to think about a fancy dress costume. If you don’t want to spend extra money on an outfit, you can always make it yourself. With a little patience and skill, you will get an outfit that will never be distinguished from a store-bought one.
What to choose
Among the huge number of different fairy-tale characters, it is always difficult to make your choice in favor of one or another favorite hero. This article will discuss the Dunno costume. Everyone probably remembers such a controversial hero of the famous writer Nosov, as well as his memorable clothes.
The simplest option
To sew an original costume, you can use those elements of clothing that the child already has. Perfect shirt orange color, which, however, can be replaced with a T-shirt. Pants or shorts must be yellow. In order for the outfit to fully correspond to the description, you need to remember to take care of the suspenders, they should also be yellow.
To complete the look, a green tie and matching socks are not enough.
How to make a hat
An indispensable attribute of Dunno's costume is his famous blue hat. Making it yourself is quite simple:
- the volume of the child’s head is measured + 1 cm is added;
- margins and height are made arbitrary.
Felt, which holds its shape well, can be used as an ideal material. When sewing a headdress, you need to remember that the edges must be rigid. That’s why it’s worth using a cardboard frame. An unnecessary hat with large brims will also serve as a great base. Here it is enough to sheathe the costume part with blue fabric.
What other options are there?
To sew a Dunno costume, any plain fabrics bright colors. It is absolutely not necessary to look for a pattern for a shirt and pants; you can sew it according to the model of those things that the child already has.
When sewing parts New Year's costume It is worth considering that the cut should be loose so that all things look a little bigger size what they really should be. This method will allow the child to look more like a fairy-tale hero.
As an additional detail, you can purchase a yellow wig, which is exactly the color Dunno had. Or sew pieces of yellow fabric to the bottom of the hat to imitate hair.
So, as you can see from the article, making a Dunno costume with your own hands is not as difficult as it seems.
What and for whom can a suit be useful?
The character Dunno is fictional and fabulous.
According to the plot of the book, he is a cheerful boy who does not want to live up to his name and thinks outside the box. He is kind, mischievous and friendly. That is why both boys and girls want to be like him.
There can be many reasons to dress up as Dunno. The main thing is that the child not only puts on the costume, but also understands the character traits of this hero. This is another opportunity to reread the work and discuss it with the whole family. Even a small child will be able to be interested in this wonderful book.
The image of Dunno will be appropriate at any event:
- New Year's party in kindergarten or school.
- Children's birthday. The costume can be worn by either the birthday boy himself or any of the guests.
- Any costumed event (for example, a holiday based on fairy tales).
- Theatrical performance in the school theater.
Character Features
Dunno is the name of the mischievous little guy from the fairy-tale city of Flowers. He has a tiny stature and a large head with a small nose.
- Bright blue hat.
- Canary yellow trousers with straps.
- Orange shirt.
- Green tie.
One gets the impression of a very contrastingly and flashily dressed hero. It’s simply impossible not to notice this. A child in such a costume will definitely cause a sensation at children's party and will feel confident.
If you wish, you can slightly change the color palette of the costume, but the brightness and contrast must be preserved!
Shirt and trousers: sew or buy?
Not every child's wardrobe has yellow pants and an orange shirt. If time is running out and you don’t have any sewing skills, you can buy a ready-made shirt or choose from those available. Before buying such a bright item, you should think about whether the child will wear it in everyday life?
You can replace the shirt with a bright red T-shirt. But such a simple approach will not be appropriate at all events. Therefore, it is better to prepare for the event in advance and sew a shirt with your own hands.
Sewing a shirt is not as difficult as it seems. On the Internet you can find the most a simple pattern. Then you need to take basic measurements from your child and transfer the pattern to the fabric using a piece of soap or sharpened chalk. Dunno's shirt does not have traditional buttons, so you can make the simplest fastener on the back.
Sewing a children's shirt with your own hands, video:
The pants are made from thick but light fabric (the child will be hot in thick pants indoors). You can choose a long model or shorts. The simplest pattern is transferred to fabric in the same way as for a shirt. It is worth choosing a model with an elastic band - they are easy to sew, and a child of any age will be able to dress himself.
In addition, Dunno trousers must be complemented with straps with large buttons (green or of blue color). They can play a decorative role or hold the pants themselves on the child.
A version of the Dunno costume for a girl may include a bright yellow skirt. And some little fashionistas may prefer wide shorts or harem pants. Otherwise, the girl's look is no different from the boy's suit.
How to make a hat with your own hands
The Dunno hat is the most difficult to make. Needlewomen distinguish 2 most common options:
- Make a headdress from thick paper or cardboard.
- Sew a hat from fabric and padding (non-woven or padding polyester).
The easiest way to make Dunno's headdress is from a flat sheet of whatman paper (or thick wallpaper).
First of all, you need to measure the circumference of the child’s head so that the hat fits him. After this, a pattern for the brim of the hat is drawn on whatman paper. It represents two circles. The inner one corresponds to the size of the head, and the outer one corresponds to the outer size of the hat brim.
The top of the hat is a cone. When it is ready, it needs to be attached to the fields using glue. The finished hat can be painted with gouache or covered with satin blue fabric. An accessory covered with textiles looks more solid and festive.
It is appropriate to complement the Dunno hat with a tassel made of thread or corrugated paper. You can also add hair cut out from yellow paper. They are glued to the inside of the fields. With them, the image of a fairy-tale hero will be even more recognizable.
Video on how to make a hat out of cardboard:
DIY Dunno tie
Before you sew or make a tie, you should look for this accessory in your grandfather's chest. During the period of dudes green color was in fashion. If you don’t have the tie you need, it’s very easy to sew one. 2 identical parts are cut out from bright green fabric. They are then sewn inside out and turned inside out.
In addition to regular fabric, you can use felt, painted Whatman paper or thick cardboard. You can secure the tie around your neck with a hat (thin) elastic band or use a satin ribbon.
You must involve your child in making a paper tie. A child at any age will definitely enjoy coloring whatman paper with bright green gouache. He will treat such an accessory with care, since he participated in its creation. In addition, this is a great opportunity to practice drawing.
It’s not that difficult to make a Dunno costume with your own hands, but the child will definitely feel confident in such a unique image. And joint creativity will help to establish contact and develop a sense of taste in the offspring. In addition, the costumes of heroes from fairy tales allow you to refresh your memories of the works and discuss the character of the characters and their actions.
07 Oct 2017 Valeria 80 We recommend reading along with this article
Good afternoon, dear visitors of the Island of Good Hope!
Today we are reopening our sewing workshop, which means another one awaits you detailed master class, in which I will show how I sewed.
This is not the first carnival costume, which I had to sew for my boys. I sewed both a wolf costume and a snowman costume. But this is the first time I’ve posted a detailed master class and pattern. I hope this makes things easier for a lot of moms.
Of course, I had to sew this suit for a reason. The fact is that May 25, on the day last call, in our music school, first-graders congratulated the graduates, and my first-grader got the role of Dunno.
So I had to “rack my brains” on how to make a Dunno costume. We looked at books, of course, scoured the Internet, there were ready-made costumes, but no one told in detail, much less showed, how he did it.
Sewing a bright orange shirt, green tie and yellow pants was no problem for me. Moreover, we already had a ready-made shirt in our wardrobe suitable color(I sewed it last year), we didn’t need pants, and sewing a tie was a matter of minutes. The problem was how to make Dunno's hat.
For a long time I did not dare to use ordinary Whatman paper as a frame, as other mothers advised, with it, it seemed to me, the hat would not be very durable. But time was running out and nothing else came to hand, so I finally settled on whatman paper and, to be honest, I didn’t regret it. The hat holds its shape perfectly. Naturally, it won’t be possible to wash such a hat, well, let’s learn to treat things more carefully.
So, here is a scaled-down drawing of a hat and tie pattern. To enlarge the picture, click on it with the left mouse button.
To make panties, you can use the pattern of panties, which I always use to sew shorts for my boys. I will post the shirt pattern very soon.
We build a hat pattern on a large Whatman paper.
Glue the top part of the hat into a cone. The circumference of the base of this cone should coincide with the length of the inner circumference of the crown of the hat.
But it's okay if they are a little different. The main thing is that after cutting out a smaller circle, try the crown on the child’s head and make sure that the hat stays stable on the head: it doesn’t fall too low, but it doesn’t fall off either.
We cut out the same details from fabric, only in two copies and with seam allowances (I used blue satin). We do not cut off the top of the cone!!!
We sew the outer circle on a machine, notch it close to the line.
Cut out the inner circle.
Turn it inside out and sew the outer edge with bias stitches.
The process is not quick, but don’t be lazy, be sure to do it, then the edge will turn out neat. Iron, remove bias stitches and carefully insert the paper piece. Machine sew the inner circle.
Now let's move on to the top part. We sew two cones: inner and outer.
We insert the inner cone into the paper frame, pulling out the tip at the top.
Cover with the top and fasten both ends hand stitches. Then we will remove them and sew the top of our hat in this place.
We connect both parts at the bottom using hand stitches and iron them inward.
Now we need to connect both parts of our hat. I did this by hand with hidden stitches, and so on all the way around.
On the inside we got this raw edge, which we simply trimmed with bias tape.
First, we sew it on with temporary stitches by hand, and then carefully, also by hand, with threads that match the color of the hat (unfortunately, we can’t do it with a machine).
Our hat is almost ready, all that remains is to sew on the top. From the same blue satin, I cut strips about 15 cm long and 1-1.5 cm wide. I connected them all in the middle, and sewed this bomb to the top of the cone.
This is the hat we got.
Yes, I almost forgot, the brim of a hat can be easily adjusted the required form. For example, I curled the brim up at the front.
With a tie everything is easier and faster.
We cut out 2 parts according to the pattern. We glue one of them with serpyanka or non-woven fabric.
We connect the parts with the right sides inward, stitch along all the lines except the top one, cut off the corners and turn them inside out through the top cut. We sew with oblique stitches, iron, remove the stitches. We bend top part tie and insert an elastic band there, the length of which can be adjusted on the child.
All you have to do is sew a shirt and pants. And you DIY Dunno costume ready.
Let me remind you that in the near future I will post a pattern and a detailed master class on making a shirt. To avoid missing out, subscribe to blog updates.