We sew patterns for baby bon dolls. Sew clothes for baby boom, full-size pattern. Where to find clothes patterns for Baby Bon

Girls' favorite toy - a doll - is especially desirable if it is Baby Bon. She will almost completely repeat the habits of a real baby: she eats and drinks, cries and laughs, makes sounds similar to “cooking”, sits on a potter, etc. It is not a problem to buy clothes for such a doll if they are available. family budget extra funds. We offer to sew it with your own hands, because it's easy!

To begin with, you need to choose necessary material. You should not immediately run to the store after him, you can just rummage through your old things that you already wear, you will definitely find something there. In addition to the fabric, you will need fasteners.

Before building a pattern, you need to take measurements from the doll and transfer them to paper.

Build the pattern according to the drawing.

The material is folded in half face to face, a pattern of trousers is superimposed on it so that straight sides match the fold, and circle.

Again, the material is folded in half face to face, the pattern of the top of the overalls is superimposed in the same way as we imposed the pattern of trousers. We circle. We make laps on the seams of 10 mm from all sides and cut them out.

On the wrong side of the material, the top of the overalls is superimposed and outlined. We make an overlap on the seam of 10 mm, and where the fastener is supposed to be - 15 mm. Cut out. We make the same detail with an armhole in the opposite direction.

If your material crumbles, process the cuts.

The front part of the top of the overalls is folded with one of the halves of the back part face to face and stitched along the side cut.

We fold one part of the leg in half and sew where the line of the inner seam passes. Similar actions are carried out with the other leg.

We fold the legs with the right sides to each other, combining the contours of the bend line, as shown in the illustration. From one side we sew to the end, and from the other - without reaching the waist level so that the trousers can be freely put on.

We bend both halves of the back part and the bottom of the overalls, where it is supposed to place the fastener, and sew both bends perpendicularly.

We bend the lower part of the legs and fix the bend.

The upper part of the overalls must be processed with a braid or a rudder.

Ahead we sew Velcro, buttons or buttons.

Buttons are sewn on the shoulders in front, and loops are made on the back. Here, instead of buttons, the use of hooks, Velcro or buttons is allowed.

On this jumpsuit can be considered finished. At your request, you can sew it without shoulder fasteners. In this case, sew on the shoulders at marks 5 and 6. It is also possible to sew a jumpsuit with small sleeves. In this case, top part performed in accordance with the pattern of the shirt, trimmed to waist level. Leg length options can also be different: in the form of shorts or breeches.

On this master class on making overalls for Baby Bon with a pattern can be considered finished.

Like many years ago, the doll remains a favorite toy for millions of girls. And modern parents are increasingly choosing Baby Bon baby dolls for a gift. This interactive toy will be the baby's companion in all activities for many years and, like the hostess, will need new wardrobe items. Do-it-yourself clothes for Baby Bon on patterns in life size- the process is not only fascinating, but also profitable, because industrial ones are very expensive.

The cut of clothes for a baby doll is simple: there are no darts and embossed seams, therefore, on the basis of a blouse and panties, you can model all types of clothes - from underwear to a fur coat. There are several sources of patterns for toys:

Most often, dolls are sold with a minimum set of things. It is enough to circle them along the contour - and you will get the basis for construction.
It is easy to find patterns of clothes for Baby Bon on the Internet. They can be printed or copied directly from the monitor by calculating the desired scale. For printing patterns, it is convenient to use the Abdobe Reader program. If the drawing is intended specifically for the baby doll Baby Bon, in the editor settings you need to uncheck the line “fit to page” or check the line “actual size”. If the pattern is made for a doll with other parameters, it will have to be adjusted empirically.
It is not difficult to create clothing patterns for Baby Bon with your own hands according to the algorithm for constructing a drawing of clothes for children. The bobblehead has the following options:

Sewing magazines Ottobre and Burda also print patterns for Baby Born. It is very easy to make clothes with your own hands, because the drawing is accompanied detailed instructions tailoring. On the Internet, you can download issues of Andrea Kreative - a fashion magazine for dolls from 30 to 50 centimeters tall.

Materials for tailoring

Of course, the choice of fabric for Bebik's costume is the most important step. For the wardrobe of a baby doll, you can stop at the same materials from which things for babies are sewn: cooler, ribana, fleece, footer, flannel and others cotton fabrics. It is best to choose textiles with a print on a children's theme or plain, avoiding an overly large pattern. The details of the outfit for the baby doll are small, so any leftover fabrics are suitable for sewing.

In addition to fabric, you will need:

Body tailoring

Baby bodysuit is one of the most popular wardrobe items. For a baby doll, you can sew several options for such clothes: a bodysuit with a short or long sleeve, with a zipper or buttons at the front, with buttons or ties at the shoulder seams. The simplest option is a sleeveless bodysuit, sewn from two main parts: back and front. In addition, you will need: braid for edging cuts, undercut details for fasteners on the shoulders and between the legs and buttons or buttons. The order of work is this:

If sleeves are assumed according to the body model, then fasteners should also be placed in the shoulder seams, and it is convenient to sew the sleeve in until the side seams are joined.

Overalls for a child

Overalls, or slip, for a child most often has a fastener along the crotch for ease of changing the diaper. In the case of sewing a jumpsuit for a doll, the fastener can be omitted, simplifying the process. Babydoll slip can be ankle-length or with a closed foot. Cut details in the first case: back, two halves of the front and two sleeves. If the feet are closed, then the top and bottom of the foot are added. In addition, 3 cm wide facings are cut out from the ribbed for the front cuts and neckline and cuffs for sleeves and legs. The algorithm of work is as follows:

Baby girl clothes

The Baby Born girl has a greater variety in her wardrobe than a boy. For the doll, you can sew a lot of interesting dresses, and coats based on them. Models of doll dresses do not differ from children's ones: flared, detachable at the waist or on a yoke, with a clasp in front or on the back, a sundress and a tulip dress, with or without a long sleeve. Depending on the model, the dress will require a cut of 30-35 cm in height and 80-140 cm in width.

If a dress pattern is used as the basis for building a jacket or coat for a doll, then the thickness of the fabric should be taken into account. For a model with insulation or just thick material, increase all allowances for a loose fit. The front of the coat consists of two parts, in the center of the front you need to calculate the increase in the fastener for overlapping one shelf to another. The neck of a jacket or coat is processed with undercut facing, the selection is cut out together with a shelf or separately.

Also, a jacket or coat can be equipped with a hood or collar. The hood is a rectangle, one side of which is the length of the neck between the extreme points of the shelves. And the second side is equal to half the circle passing from the chin to the crown. Fold the rectangle in half and stitch, sew the opposite side into the neck.

Making shoes with your own hands

An indispensable item of clothing - shoes for dolls. there are a lot on the Internet: booties, sandals, boots, ugg boots. They differ from each other in material and complexity of execution. For the manufacture of shoes and booties, felt and soft leather or leatherette are suitable, for boots and ugg boots - eco-leather with pile, faux suede, pieces of fur and denim. In order for the shoe to be stable, a dense material, such as cardboard or plastic, is inserted between the foam rubber sole and the inner insole.

Shoes can be made different ways: sew, tie or glue with the help of "Moment". It all depends on the chosen material and type of shoes.

Kangaroo to carry doll

The baby will certainly want to take her baby doll for a walk, but toy strollers are not always convenient in these cases. A wonderful alternative is a kangaroo for a doll. It is not difficult to make it with your own hands, and from the materials you will need:

As the main fabric, you can take the old jeans of an adult, the main thing is that the leg width is at least 30 cm. Any textile is suitable for the wrong side: matching the main fabric, contrasting or with a print. Kangaroo straps can also be cut out of denim or you can purchase webbing for slings at a sewing store. It will take 2-3 hours to sew the Baby Bon carrier.

Additionally, kangaroos can be provided with pockets, ruffles, decorated with key rings and appliqués.

baby born- this is the name of the most popular baby doll of our time. This is the toy that the children of the world would like to receive as a gift. She drinks from a bottle, eats, cries and imitates life in every possible way.

The stores offer a large assortment of dresses and blouses for this doll, but they are all expensive. How to sew clothes for Baby Born?

Material selection

An important point - the fabric for this doll should be printed with a children's theme. As a material, we recommend knitted fabrics (fleece, velor, coolers). If blankets and diapers are required, then terry and flannel will do.

Tailoring for Baby Born is easiest done by altering existing baby clothes.

Put the shirt on the doll, and then separate everything unnecessary with a basting seam. Then remove the item. Take advantage sewing machine for stitching and cut off the excess. This a good option for altering overalls, vests, hats, sweaters and everything else. But you can also make an exclusive version by drawing a pattern and taking a few measurements.

Create a template

To make a pattern, you need to measure:

chest girth;
belly size;
doll growth;
the width of her shoulders;
arm and leg length.

If you plan to make a hat, measure the volume of the head. Put the baby doll on paper and circle its contours. Next, add a couple of centimeters so that future clothes fit the doll freely. This will be the template.

The next step is to draw a sketch of the future product. Folds, seams and other elements are drawn, which are later transferred to the main template. After that, you need to transfer the details to the fabric. Cut out with seam allowances, and then start sewing.

To get a neat thing, process the sections on sewing machine. If there is no such unit at hand, you can overcast the seams manually. When sewing, do not forget about small elements. You will need fasteners, which can be buttons or Velcro. Decorate the resulting clothes to your liking.

Try to keep your clothes consistent. From colored fleece, you can make a beautiful jumpsuit, which is ideal for an interesting eared hat. Or make a terry sweater with a hood - soft and stylish. You can sew not only clothes, but make various additional elements that will look harmonious on the baby doll.

No need to immediately run to the store for new materials. First, rummage through old, long-lived things in the closet that no one else will wear. It is there that you can find something that matches the color. Use your design talent. From an initially boring attire, it is easy to make something catchy and unique that will please the child and suit the doll.

Walks are so necessary little child. In the cold season without insulated clothing it will be difficult for him! The jumpsuit will help protect the child from the piercing breeze and cool weather. Bright and light, it will appeal to any girl and will suit all dolls, whose growth is from 38 to 42 centimeters. Thanks to two fasteners "zippers" which are on a forward particle, the jumpsuit is simply dressed on a doll. The hood is tightly tightened over the head with clamps. And the sleeves and pants are well kept on the arms and legs with the help of rubber bands.

Approximate time to create a jumpsuit and a hat for a baby bon (born) boy with your own hands: two hours and thirty minutes.

Materials that will be required for work:

Bolonium material 42 by 95 centimeters.
Cord 50 cm.
End caps - two pieces.
Fasteners are two things.
Linen elastic band 50 centimeters.
Threads in color.
Tailor's chalk.
Measuring tape or ruler.

You can find and print a pattern of overalls for a Baby Born doll on the Internet. In order for the dimensions of the pattern to be in full size, you need to uncheck the box next to the words “fit to page” in the options tab. All major seams (other than hem seams) are made at a distance of one centimeter. Description of work.

We glue the patterns according to a special scheme.

Let's transfer the patterns of the overalls to the material, leave allowances of one cm for each cut of all the details.

Details: one - Back (one piece).
Side part of the front (two pieces).
The main part of the front (one piece).
Hood (one part with a fold).
Sleeve (two pieces).
The lower particle of the front (two things).

Let's cut out the auxiliary details for the pattern:

Planochka 28 by 5 centimeters (two pieces).

Description of work

Fold the halves of the zipper right side on front sides internal sections of the side parts of the front, make a seam and sew. On the front side of the side cuts of the main part of the front, we first put the planks folded in half with the wrong side inward, then the zipper with the right side down, we make the seams. Turn out the zippers, make a stitching. On the front side of the lower cuts of the main part, we put the lower parts of the front with the front side down, we make a seam.

Bend the lower parts of the front and make a stitching. Fold the back and in front of the front sides inward, create the shoulder seams. We put the eyelets on the hood according to the marks. We make darts on the hood. We fold the hood detail with the front side inward, we make a connecting seam on the cut from above.

We will bend the open edge of the hood by two centimeters, make a seam. On the front side of the throat of the back and the side parts of the front we put a hood, with the front side inward, combining the middle of the hood and the back. Part of the hood should cover the zippers.

We create a seam.

We turn the hood inside out, create a stitching from the back and side parts of the front. We put a sleeve on the front part of the armhole of the back and the side elements of the front, with the front side inward, aligning the middle of the sleeve with the shoulder seam, we make a line.

We bend the cut from the bottom of the sleeve by 1.5 cm, insert an elastic band eleven centimeters long, fix its tips with pins. Fold the details of the sleeve, back and in front of the front sides inward, sew a line on the sleeve and create a side seam.

We will bend the cut from the bottom of the leg by 1.5 cm, we will make a seam. We insert an elastic band fourteen cm long, fix its tips with pins. We fold the details of the front and back with the front sides inward, we make a step seam as close as possible to the cut (five mm.). Turn the jumpsuit inside out, fold the cut on top of the main part of the front by one centimeter, create a seam. We insert the cord, put on the clamps and limit switches. Do-it-yourself jumpsuit for Baby Born doll, completed!

How to make booties for a doll with your own hands

Little doll feet, like children's feet, will need warmth, which is provided by knitted things. Booties are an important part of a child's clothing, because they are shoes. To knit such shoes you will need only two things:

Knitting needles - two main and two additional.
Own yarn.

The process will take place as follows:

Cast on 21 loops, on the knitting needles, knit the first row with facial loops.

We remove the first loop, throw on a thread, knit nine facial loops. We throw the thread again, then one person. loop and another yarn over. Knit nine facial, put on again. Finish the chain with a front loop.

third line created by facial viscous, in addition to yarn. They are made by crossing a loop.

After the removed first, you need to tie one front part. Having thrown a thread, we will knit nine loops with facial knitting. After another yarn over, we knit three loops. Now comes throwing, nine loops, a new yarn and two loops.

The new row consists entirely of special knitting.

The sixth line will begin with the first stitch removed and two knitted loops. In continuation, we throw the thread, knit nine loops. After a new crochet, you need to tie five loops. We finish the chain with a throw, nine loops, throwing a thread, three loops.

We create the next odd row in garter stitch.

The removed initial loop goes further with three facial and threading. This is followed by the invariable nine loops, throwing on, seven facial loops. After throwing the threads, we knit nine loops, throwing is done, four facial ones.

New three lines we knit with a shawl.

It's time for the mouse. On one additional knitting needle we drag thirteen loops from the beginning of the chain, and on the second - the same number from the end. We will knit new eleven rows in garter stitch with the capture of one loop from each additional knitting needle. As a result, there should be thirty-three loops on the main knitting needle.

Eight consecutive rows we knit with a garter stitch, which, if desired, can be diluted with yarn of a different color. That's all, we made booties with our own hands for a baby bon doll. If you understand this topic, you can understand that sewing and sewing clothes for a doll is not so difficult, most often shoes and coats are sewn for baby dolls. You can make a coat for a doll with your own hands using a pattern and detailed master class the most important thing is to start. When sewing things for a doll, remember that this will make your child very happy. For the doll, you may also need a bodysuit, a jacket, and a few more things.