DIY fabric phone case: patterns, photos, videos and detailed explanations. Denim Phone Case How to make a jeans phone case. How to sew an original phone case Sew a denim phone case

Everyone has a pair of jeans in their wardrobe, which it's time to either throw away or give to those in need. If you don’t raise your hand to throw it away, and none of those in need need them, you can do creative activity. Within the framework of this article, ideas will be given on what jeans turn into, except for elegant shorts.

Butterfly

To make a butterfly, you need to cut out two small rectangles from the fabric, measuring 30X12 cm and 2.5X12, respectively. A larger rectangle along the wide side is folded along a dotted line and ironed, glued with a thermal strip. After that, so that the butterfly has an elegant look, we fold it along the small side according to the dotted line, stitch it, grab it with a narrow strip, fluff the edges for decoration. Then we take of blue color gum, insert into a butterfly and get quite a decent mount.

Bag

From old jeans you can make:

• travel bag;
• if you sew a base to a piece of trouser leg, you get a walking backpack;
• laptop bag;
• a children's handbag from small pieces of matter.

It is not necessary to use large pieces of matter; you can make a bag from patches.

Case for phone, tablet, laptop

When making a tablet case, you need to find a hard base, for example, a piece of thick cardboard. Having cut a rectangle of the required size, we glue it with a fleece fabric. Then we cut out a blank from jeans for a cover, paste cardboard on denim. We bend the jeans, fix it with Moment glue. We iron the cover with an iron from the outside. We make the substrate from jeans, stick it on the case, attach the rubber bands to fix the tablet. We make holes for the camera and microphone, sew the folds with a machine. Ready!

coaster

The idea is as simple as a Kalashnikov assault rifle: a seam is cut out of old jeans, smeared with quick-drying glue. The fabric has good thermal insulation properties and will protect the surface of the table from the effects of temperature.

Pillow, pillow cases

Here, creativity is generally expanse - you can make a pillowcase from patches or one-piece, with or without pictures, you can even make it with a pocket for useful little things, sweets, for example. Sizes and shapes are selected to your taste, and depending on the available pillow.

Mat

The rug requires a lot of fabric, so the best solution is to make it from patches. The size of the resulting product depends on how many old pants, skirts and jackets will be sacrificed.

Shoes

You can’t imagine anything here - sandals, slippers, and boots. You can’t even pick up a name for some products - felt boots or boots, it’s not clear. But the main thing is not the name, but the convenience, practicality and aesthetics of shoes. You can even attach a high-heeled sole to such a refinement.

Skirt

If jeans do not suit you in some way - either in color, or torn in some place, or the style does not suit you - then it is quite possible to change them into a skirt, while repainting the fabric, adding decor, or fluffing the edges of the fabric.

Organizer

Since the fabric of jeans is quite strong, it will make a pretty decent wall organizer. It all looks like a panel equipped with pockets. With a variety of accessories like labels, dogs and pendants, you can also decorate it well.

Detachable collar

Made from an old denim shirt or jacket. The collar is cut off from it, after which, at its own discretion, it is decorated with beads, spikes, rhinestones - the main thing is to look interesting.

You can just take and cut off the legs, but there are a lot of options for decorating the resulting shorts - inserts, rhinestones, rivets, decorative elements in the form of ribbons and bows, you can artistically tear the shorts, fluff the edges of the fabric.

A cat is also a person, and he should have a place in the sun. You can equip a bed for a pet without any special material costs, the cat will not be offended that they saved on it.

If there is a desire to upholster a chair with fabric, but there is no desire to spend money on it, old jeans will help save money, and their pockets will also serve to store various little things.

A tool holster is made like this - a jeans leg, from which the upper part with pockets is cut off, is cut along, the edges of the fabric are processed, and then the pockets of the holster are sewn on a typewriter. The number and size of holster pockets are adjustable depending on its capacity.

For lovers unusual style in the kitchen, you can recommend making an unusual napkin for the kitchen with a pocket for cutlery.

cosmetic bag

A good option for using denim is to sew a cosmetic bag out of it, decorating it with various accessories like beads, buttons or rhinestones.

Apron

From denim fabric you will get a strong and durable apron. With a good imagination, if it is interesting to decorate it, then it will look no worse than a branded product.

Earrings

If you want to make a gift to your beloved with your own hands, but one that no one else has, you can make her stylish, original denim earrings, decorating them with jewelry.

In order not to throw away an old jacket or jeans, you can make a container for a wine bottle out of their fabric. The pocket can also be left, it can hold a corkscrew or a folding knife for uncorking containers.

Stand for hot dishes

Comfortable and stylish coasters will save the surface of the table from exposure to hot temperatures. A similar accessory is made in the form of a circle or a rectangle, and is bordered with fabric at the edges for aesthetic purposes.

For the elements of the frame, fragments of fabric cut into narrow strips are used, then rolled into a roll and glued, which are then attached to the cardboard base. This approach allows you to compose the most bizarre shapes to decorate the frame.

Cover for books (electronic and conventional)

The denim book cover design is very similar to the above tablet case, the only thing is that there is no need for camera and microphone holes.

In fact, the same tack, only made of denim - nothing complicated.

Necklace

It is made from narrow strips of fabric, figuratively rolled up and tucked in the form of rose flowers, for example. Looks original and elegant.

With an original and elegant design, it provides protection for the sewing machine from dust and mechanical damage. Pockets allow you to store threads, scissors, needles and other accessories necessary for work in the case.

Mask

An old denim mask is perfect for children's matinee, or for theatrical props to school.

An original solution, you don’t even need to cut anything - just sew up the bottom of the leg of the jeans, and fill the resulting container with earth in which ornamental plants can be grown.

Blanket or bedspread

To make a denim bedspread, you will need a lot of free time and unnecessary fabric. Due to its size, a blanket or bedspread will be sewn from patches.

Curtains

Curtains can be made from patches, or cut the legs of jeans along and sew them together.

Hammock

The most important thing is to make a reliable mount for the hammock. The fabric has a good margin of safety, but you should not use a completely dilapidated jeans under a hammock.

Backpack

From fabric, you can sew not only the backpack itself, but also the handles to it. Denim is dense and durable, and is great for a backpack as a material.

House for a cat, dog

Denim isn't just for people. Clothes, no matter how much you wash them, absorb the smell of the owner, and for the dog this is the best smell in the world, it will immediately settle in a house where it smells like the owner.

Here, whoever likes what - cats, bears, donkeys, monkeys or horses, in a word, you can sew a whole zoo.

Cover for lamp

If desired, you can make a cover for a lampshade no worse than a branded one, and stylishly decorate it with embroidery or jewelry.

Bracelet

Bracelets are made from narrow stitched strips of fabric and decorated with various trinkets.

A soft denim case will perfectly protect your glasses from dust and mechanical damage.

Sundress

You can sew a denim sundress if you have experience, free time and desire. The experiment is quite bold, because even some branded items do not sit on a person the way he would like.

Dress

To cope with the task of turning jeans into a dress, you need to be an experienced seamstress. If there is a lot of time and desire, everything is possible. The result can be much more interesting than the original product. In general, the main thing is the process itself, it sometimes delivers no less pleasure than the result.

Each of us has at least one phone in our pocket, and some have more. Choosing a new gadget, we strive to show individuality, and choosing a case for it, we decorate and protect it from scratches. But if it is almost impossible to find a unique phone, then you can make an original and exclusive case for it with your own hands.
Today we will sew a simple case from old jeans and decorate it with glass beads embroidery. The work is not difficult, but requires perseverance. So let's get started!

old jeans
scissors
tailor's pins
ruler
a piece of chalk
threads in the color of the fabric or close to it
a piece of Velcro 1.5x1.5 cm
glass beads in two contrasting shades
fine embroidery needle

Progress:
Lay out the jeans, aligning the edge along the bottom. We put the phone, stepping back a little from the extreme line down, as shown in the figure. Set aside 0.5 cm on each side of the phone and draw straight lines with a ruler and chalk. Then, stepping back another 0.5 cm from these lines, we draw parallel ones.

We chop off the double layer with pins in several places and cut along the extreme lines.

Having removed the pins, from the inside we apply Velcro to the upper allowance exactly in the middle.

We sew on a typewriter around the perimeter of the Velcro, going at the end with a line on top of each other. If there is no machine, you can carefully sew by hand.
Again we cut off two layers and sew on a typewriter along the marked lines, making bartacks at the beginning and at the end of the line.

Lightly fluff the allowances by making a fringe.

Now it remains only to decorate the finished case. Draw any drawing with chalk - it can be an arbitrary line, a zigzag, parallel lines or some kind of pattern.

For beginners in this matter, the drawing should be chosen according to the principle: the simpler the better.
We embroider the pattern in the back way with a needle, as shown in the pictures.

A special case will help to extend the operational life of the phone, which prevents the appearance of cracks and micro damage. To date, the stores offer a large selection of different models.

Most of us love unusual things that help us stand out from the crowd.

A large number of interchangeable covers and panels helps to diversify the design of a mobile phone.

Buying the necessary accessory is quite simple. Another thing is to do it yourself from a variety of improvised materials.

Here you can emphasize your individuality and exquisite taste. Our material presents several ways to create a cover with your own hands.

Materials for creating a protective case

How to make a case with your own hands? Everything is quite simple. The main requirement of the whole process is the availability of free time and good imagination.

Various materials can be used to make an accessory:

• felt;
• jeans;
• silicone film;
• wide elastic band;

The soft base of the materials protects the mobile phone from daily tests. There are no scratches or cracks on the glass surface.

Tools for making a mobile accessory

These include:

• sharp scissors;
• ruler;
• button;
• glue;
• ribbon or long lace;
• sticky base.

When working with each material, it is necessary to take into account its properties. For example, felt does not fray at the edges when cutting out details, while denim needs additional border design.

Silicone film does not like frequent exposure to a sharp needle. To do this, you need to use glue that dries in a few seconds.

The process of making a phone case

The initial stage of creating a case is the preliminary design of the future accessory. To do this, you can draw a sketch of the product on paper. It is important to consider the size of the phone, as well as the location of the camera and microphone.

The finished case should be slightly more sizes mobile phone. This will allow you to freely pull it out whenever necessary. Fabric accessories do not require specific sewing skills. Here you need to carefully sew the two parts together.

The process of creating a cover is divided into several stages:

• Cut out paper patterns.
• Transfer them to the material from which the cover will be made.
• Carefully cut out each piece leaving 1 cm for the seams. This technique allows you to sew the right product, taking into account the parameters of a particular model.
• To connect felt and denim, you will need a sharp needle and a strong thread.
• To make a silicone phone case, specialized glue will help.
• When all the parts are interconnected, you can fix the protective button, which will prevent the cover from constantly opening.

For people leading an active lifestyle, you will need a sports phone case. Due to the tight elastic band on the forearm, it is well fixed on the human body.

For this, a small piece of dense elastic is sewn to the finished protective product. In the process of movement, it will tightly press the body of the mobile to the hand.

Note!

The design of the phone book cover is a cover. The body of the mobile phone is fixed on one side, and the other part serves as a protective panel. A snug fit of the upper part of the cover will provide small magnets that are fixed in the upper corners of the cover.

You can make additional sections for storing plastic cards using a multilayer fabric structure.

To do this, you need three fabric bases, which differ in size.

The first part of the pocket is sewn to the base of the cover. All other elements are sewn together and fixed to the previous parts of the cover.

Decorative elements will help create an exclusive design of your phone accessory. Fabric appliques will add zest to your product. Do not use multi-colored details for the design of the cover.

Note!

DIY phone case photo

Note!

If you have old denim items lying around in your nightstand, do not rush to throw them away. Now old clothes have a chance to get new life. In this article, we will tell how to make a bag out of old jeans. It will protect your phone from dust, dirt and will be a great accessory for your device.

The sewing process will take you no more than fifteen minutes, however, as a result of such a waste of time, you will receive an excellent product.

For its manufacture you will need the following materials:

1. Denim;
2. Threads, needle;
3. Button;
4. Ruler;
5. Chalk.

Manufacturing instructions

1. We measure the size of your device and, based on these data, draw a rectangle on the denim with chalk, then cut out the blank.

3. Cut out the upper part of the cover in the shape of a triangle and pull out the threads. An example can be seen in the photo.

4. Sew on a button and make a hole for it. Our product is ready!

5. If desired, such a cover can be decorated with beads, sequins, beads and much more. Jeans are always in fashion, with a denim cover you will always look stylish!

Each of us has at least one phone in our pocket, and some have more. Choosing a new gadget, we strive to show individuality, and choosing a case for it, we decorate and protect it from scratches. But if it is almost impossible to find a unique phone, then you can make an original and exclusive case for it with your own hands.
Today we will sew a simple case from old jeans and decorate it with glass beads embroidery. The work is not difficult, but requires perseverance. So let's get started!

old jeans
scissors
tailor's pins
ruler
a piece of chalk
threads in the color of the fabric or close to it
a piece of Velcro 1.5x1.5 cm
glass beads in two contrasting shades
fine embroidery needle

Progress:
Lay out the jeans, aligning the edge along the bottom. We put the phone, stepping back a little from the extreme line down, as shown in the figure. Set aside 0.5 cm on each side of the phone and draw straight lines with a ruler and chalk. Then, stepping back another 0.5 cm from these lines, we draw parallel ones.

We chop off the double layer with pins in several places and cut along the extreme lines.

Having removed the pins, from the inside we apply Velcro to the upper allowance exactly in the middle.

We sew on a typewriter around the perimeter of the Velcro, going at the end with a line on top of each other. If there is no machine, you can carefully sew by hand.
Again we cut off two layers and sew on a typewriter along the marked lines, making bartacks at the beginning and at the end of the line.

Lightly fluff the allowances by making a fringe.

Now it remains only to decorate the finished case. Draw any drawing with chalk - it can be an arbitrary line, a zigzag, parallel lines or some kind of pattern.

For beginners in this matter, the drawing should be chosen according to the principle: the simpler the better.
We embroider the pattern in the back way with a needle, as shown in the pictures.

Can be knitted or sewn. I suggest you sew DIY phone case from old jeans. Surely everyone has jeans that you do not wear. Don't rush to throw them away. Denim is a wonderful material for needlework, for creativity. From it you can create not only stylish and practical clothes, but also interesting accessories, toys, jewelry. jeans are on sale now various colors and shades, and this further expands the possibilities for creativity.

To create a case for my mobile phone, I took my husband's jeans, which he no longer wears. Why good should disappear. Jeans are a pleasant coffee color, which means that the case will please the eye.

Before sewing the case, I took measurements of my phone. By the way, I need to try very hard to find a case for my phone in the store. And all because of the large size. Its parameters are: length - 12.5 cm, width - 6 cm, thickness - 1 cm. Based on these dimensions, I cut the fabric. In order to sew a cover, I needed

denim,

not very thick linen fabric,

big button,

thin rubber cord about 15 cm long,

sewing threads to match the fabric,

From jeans, cut a piece measuring 28 cm by 8.5 (this is already taking into account seam allowances). Cut a piece of the same size 28 by 8.5 cm from linen fabric. A denim cut is for the outer layer, and a linen cut is for the inner layer of the cover.

Fold both pieces in half right side up and stitch along the long sides. Turn the part for the inner layer so that the seams are inside. Do not turn the jeans part inside out. Gently insert it into the linen piece. This can be done using a mobile phone. Just specify the size and the item will fit snugly. Adjust both parts so that they match the seams and corners.

Sew the corners obliquely at a distance of about 5 millimeters from the edge (as in the photo above)

Then we turn our details so that the denim is on top, and the linen is inside. Thus, the seams of both parts will be inside.

There will also be stitched corners inside. At the same time, they also give shape to the cover.

We determine the front side of the cover and sew on a button for the fastener. On the opposite side, along the edge, we outline the middle. An elastic band will be sewn here. Then you need to carefully bend the edges of both parts inward and sweep them together. Along the way, we sew a loop along the mark. Now it remains to sew on the marks, remove the extra threads and try on the phone.

It's so easy and quick to sew do-it-yourself phone case.

Today it is difficult to imagine life without a mobile phone, we take it with us almost everywhere, we actively use it day after day. In order not to hurt so much what a person needs device, a case is used to protect it. Naturally, covers can be bought in a store, but it is expensive and this thing will not always be exclusive. Incredibly beautiful covers you can sew yourself. There are a huge number of patterns for sewing cases, they are sewn from felt, leather, fabric, from any materials, the choice of which depends on imagination. Let's try to sew a phone case with our own hands. It's not difficult at all!

First of all, you need to choose the material from which to create a phone case with your own hands, for example, felt, jeans, wood. You also need to choose the style of the future cover: with a strap, with a Velcro fastener, with a zipper.

The main stages of the process of sewing a cover:
1. Pattern
2. Cutting
3. Tailoring
Let's take a closer look at the algorithm step by step.

Pattern

The first step is to make a pattern for a phone case. The process is responsible. The mobile device is placed on a sheet of thick cardboard and circled with a pencil. Based on the thickness of the phone, make allowances for the seams. Cut out the pattern. You can quickly learn how to sew yourself, then, if you wish, you can do non-standard and individual things with your own hands.

Cutting and sewing

The second stage is cutting and sewing a phone case. The pattern is applied to the selected material, parts of the future case are outlined and cut out.

The easiest way is to connect the parts of the cover with a stitched seam on sewing machine strong threads. Sewing a phone case from old things is very popular, for example, jeans, sweaters and even socks are used.

Assembly

The third stage is the assembly of the product. If the parts of the cover are connected on a sewing machine, then the contour of the seam is outlined with a pencil along the front of the part. Case details are left with large allowances. Fold both parts of the phone case together and sew. After that, allowances are cut off, leaving about 0.3 cm to the seam.

Master classes on the topic

We present several simple master classes on tailoring cases and stands for the phone with your own hands.

DIY denim phone case

What we need:

• denim;
• threads of golden color;
• decorative tape;
• sewing machine;
• scissors;
• ruler.

We cut out two parts, long and short.

A long piece should taper from one edge - this will be the smell of the cover covering the opening. We measure our mobile device, and taking into account the seam allowance, we make a pattern.

We process the top of the short part with an overlock seam. We have a decorative tape.

Put the two pieces together and sew them together.

phone stand

With your own hands, you can make a lot of phone stands from improvised materials, for example, from paper, cardboard, a plastic card, parts from a designer, stationery clips.
Let's dwell on the option of a cardboard stand.

What we need:

• sheet of cardboard.

From a cardboard sheet, cut out a strip measuring 10 x 20 cm. Fold it in half along the short sections. We draw a figure.


The fold line remains intact. The result is a comfortable and stable stand for the phone.

Phone charging case

In order for the charger for a mobile phone not to get confused, not injured, you can sew a cover for it with your own hands.

What we need:

• Main fabric (two pieces 27x15 cm)
• Pocket fabric (two pieces in the shape of a trapezoid, 18 cm and 15 cm at the base, 13 cm high)
• Interlining (two parts, 27 x 15 cm and 18 x 13 cm)
• Ribbon 25 cm
• Fringe with pom-poms 76 cm
• Plastic eyelet for curtains

We glue the details with interlining: the main one, the pocket detail.

We sew parts. Fold inside out and iron.

Sew on: ribbon, bow.

Put the pocket on top of the main part, glued with interlining. Stitch along the edges. The pompoms are directed towards the center, the ends of the fringe overlap. Sew along the perimeter.
Fold, stitch the parts, leaving an opening for eversion. Turn it inside out, iron, and then manually sew up the hole. Install eyelet.

Leather Case

The leather case is practical, it is durable and does not rub off. Leather is expensive, so you can use old leather items, such as a bag, which will significantly reduce costs.

What we need:

We measure the dimensions of the phone and cut out 4 rectangular leather patterns according to the pattern
and one strip. Velcro is cut in the shape of a square or rectangle.

FROM wrong side stitching rectangles.

We turn the product on the front side, insert a smaller bag inside.

We bend the strip, connect. We sew one side of the Velcro to the edge of the front side of the cover, and the other to the fastener.

Sew the fastener to the cover in the center of the reverse side, bending the edges inward.

Leather tailoring master class

Felt cover

Felt is a popular material for making covers.

What we need:

• felt;
• floss threads;
• beads;
• satin ribbon;
• scissors;
• glue "Moment";
• sewing needle.

To make a pattern, we transfer the contour of the phone to paper. Add seam allowances.

We place the finished pattern on the felt.

Cut out two identical parts along the contour.

We make decorations. We glue the finished application on one of the details of the pencil case.

After that, we fold both parts, sew them together.



The presented master classes are popular and simple, create and ready product please.

Video mk tailoring from felt

The simplest phone case

The easiest way to make a phone case is to make one out of a tie.

What we need:

• tie;
• pins;
• threads;
• needle;
• Velcro;
• sewing machine.

Cut off a wide piece from the tie. We calculate the length of the bag for the phone.

Tie, steam out, then sew it so that it is the same size along the entire length.

We tuck the edges of the tie and sew. Do not throw away the excess part of the tie.

We lift the left edge of the tie up, sew along the edges, not forgetting to sew in the handle. We sew the case.

Felt phone case pattern

Felt - useful material for creativity. Dense, it does not crumble in the process of work, a wide variety of products are sewn and glued from it. Huge material color palette. Felt is not inferior in properties only to felt. Valued for durability, and when using phone cases, this property is important.

Felt phone case pattern

Fabric cover

What we need:

• sock;
• sewing needle;
• threads;
• felt;
• scissors.

We draw a pattern based on the size of the phone. Cut off the gum of the sock, cut off the excess according to the pattern. Next, cut the toe vertically.

We add the two halves where the cuts are, into triangles. We sew these “ears”, the lining can be made from felt.

Phone case with retractable tape

What we need:

• detail from the main fabric 10 x 30 cm;
• detail from the inner fabric 10 x 30 cm;
• ribbon 22cm long;
• half ring metal;
• metal decoration;
• scissors;
• threads;
• pins.

Stepping back from the top edge of the inner part 8 cm, make a loop in the center with a width slightly larger than the width of the tape. You can use the special stitch and foot in your sewing machine, or you can overcast this buttonhole by hand.

Insert the tape with one end into the resulting loop up 1.5 cm, to the short edge of the part. Sew along the outer edges of the buttonhole.

Fold the outer and inner parts of the phone case right sides together, with the tape between them. Sew 0.5 cm from the edges, leaving a seam opening of about 5 cm. Trim the seam allowances at the corners.

Turn inside out, iron and sew open area.

Topstitch short sides to hem, or sew double decorative stitching on each side. At a distance of 1.5 cm from the edge, make a second loop of the same width as the first. The second loop is located closer to the opposite edge of the cover from the first. Pin the fabric around the loop with pins.

Sew on a decorative element.

Fold the part in half, right side out, and sew along the sides at a distance of 0.5 cm from the edge, starting the line stepping back from the top edge of 0.5-0.7 cm.

Pull the tape into the upper loop, insert a half ring, bend 1 cm of the tape and pin it with a pin. Sew.

Penal is ready. You can add a magnet to the strap of the phone bag.

Even if you are a beginner in sewing: create, dare, do not be afraid to create beauty around you.

Video master class for sewing a cover from foamiran

Photos of cases for inspiration

New things from old jeans.

Almost every person in the closet can find a couple of jeans that have long gone out of fashion or just tired. As a rule, such things simply gather dust in the far corner so that the hand does not rise to throw them away. In fact, in capable hands, even old and unnecessary jeans can find a second life.

If you show a little imagination, you can make a lot of useful and, most importantly, exclusive things out of them. In our article, we will tell you how to make a children's toy, a fashionable clutch, a beautiful sofa cushion and a women's wallet out of old jeans.

What can be done from old jeans with your own hands - DIY products from old jeans: ideas and photos of beautiful crafts

Denim items Shoes from old jeans Jewelry from old jeans Bags from old jeans Lampshade from old jeans Pouffe from old jeans

As long as you invest in quality jeans, you can make a lot of new and creative things out of them. The easiest way to bring an old thing back to life is to try updating it. For example, a model with wide trousers can be sewn in and then decorated with embroidery, painted, fashionable holes made this season, or sheathed with delicate lace. If you don’t like such ideas, then try to do something for the interior. It can be a vase, a pillow or even a lampshade.

And remember that in this case you are not required to follow any strict rules. If you wish, you can cut the jeans into pieces, and then make an original tablecloth or quilt out of them. True, if you do exactly it, you will also have to spend money on insulation and lining. Above you can see some interesting ideas which you can easily implement if you wish.

How to make a cosmetic bag out of old jeans: patterns, photos

Tri-color cosmetic bag made of jeans

Bright cosmetic bag

Pattern #1

Pattern #2

Pattern #3

The easiest way to make a cosmetic bag from old jeans is to cut off the bottom of the legs in such a way that you end up with a square or rectangle. Then the workpiece will need to be turned inside out and double stitched on one side and sewn on the zipper on the other. The finished product will remain turned out and it will be possible to use. To make such a cosmetic bag look more attractive, you can spend a little more time and decorate it with embroidery or bright beads.

In case you want to do something a little more original, then make a denim makeup bag using the patterns that we have posted a little higher. In this case, you will only need to print the pattern in the desired scale, attach it to the jeans and cut out all the necessary details. If you do everything right, then after stitching you will get a voluminous product in which you can put a lot of cosmetics.

But still remember that such more complex patterns require maximum precision. In view of this, try to determine the dimensions of the blanks as accurately as possible and, of course, cut them correctly. If you try to do everything by eye, then it is likely that your cosmetic bag will turn out shapeless or skewed.

How to make a clutch out of old jeans: patterns, photos

Evening clutch

Casual clutch

Romantic clutch

Pattern #1

Pattern #2

Figure #1

A clutch is a unique thing that is perfect to complement not only an evening, but also an everyday look. The denim product, the patterns for which you can see a little higher, can be worn with casual clothes, romantic outfits and even with strict office bows.

True, keep in mind that if you sew a clutch specifically to complement office clothes, then it is best to make it from black jeans. In case you sew it with blue trousers, then in the end you will be limited in the selection of colors. And, of course, do not forget that the clutch implies the presence of a long chain that will allow you to wear it not only in your hands, but also on your shoulder.

If you wish, you can replace the chain with a leather strap or sew it like denim. All these details will make the finished clutch more convenient and versatile, but, unfortunately, they will make it very heavy. Therefore, it would be better if you still spend money and buy a steel chain in a golden or silver hue.

• Print the pattern at the correct scale.
• Cut off a trouser leg from jeans and make a blank from the widest part
• Cut the workpiece and bend it as shown in Figure 1
• Fold as shown in the master class and carefully sew all the seams
• Be sure to reinforce the sides of the clutch and put the weighting agent in the slamming part of the product
• Fix the chain on the finished clutch and decorate it to your taste

How to make a wallet out of old jeans: patterns, photos

Idea #1

Idea #2

Idea #3

Pattern #1

Pattern #2

One more original thing, which can be easily sewn from old jeans is a wallet. Since this thing is sewn from many small parts, you can quite easily make it from different pieces. If you wish, you can try to combine jeans of different colors in one product.

For example, black and dark gray or blue and pale blue. This combination will allow you to create a visual effect of volume and make the finished product even more original. I also want to remind you that you need to choose the smallest zippers for your wallet. They will be easier to sew to small details and, most importantly, they will look organic on the finished product. In case you do not want to use locks, then replace them with Velcro.

Just try to sew them in such a way that they are not visible externally. Oh, and if you want your denim to look perfect, be sure to sew a lining inside. It can be made from a special fabric or from a thinner denim. If you use dense material for these purposes, then in the end it will interfere with the correct folding of your wallet.

How to make toys out of old jeans: patterns, photos

Denim cats

Denim dog

Denim bear

Pattern #1

Pattern #2

Old jeans are the perfect material for sewing toys. Since the fabric from which they are made is very dense, you can easily make the most complex crafts out of it.

In this case, you do not have to be afraid that the finished product will not hold correct form or quickly deformed. Provided that you properly stuff it, it will remain in perfect condition for more than one year.

Secrets of sewing toys from old jeans:

• Remember, such dense fabric how jeans are best stitched with a machine using a special needle. If you try to sew it by hand, you will most likely not be able to do it well.
• If you do not want the fabric to crumble when cutting small parts, then use not ordinary scissors during work, but with serrated blades. They will cut the fabric in a zigzag pattern, thereby preventing it from deforming.
• Fill the finished toy with only high-quality material that will definitely not provoke an allergy in the one who gets it. It can be a synthetic winterizer, synthetic winterizer or holofiber.
• If it turned out that when cutting the parts, a rough seam remained on them, in no case eat to get rid of it. As a result, you can decorate it beautifully and thereby give individuality to the finished product.

How to make a phone case out of old jeans?

Case for tablet

Denim phone case

phone pattern

Pattern for tablet

As for denim covers, they can be made in two ways. The first method will appeal to those who do not like to bother, but at the same time really want to have a unique thing. In this case, you practically do not have to do anything. You will need to cut the workpiece to the desired size and simply sew it on one or both sides. If in the end you want to get more fashion item, then sew the cover according to the patterns that you can see a little higher.

In this case, you can make a product that will not only protect your tablet or phone from damage, but also close securely. In such a cover, you can provide an inner pocket, inside which you can later put thick cardboard, thereby strengthening the lower part of the product.

• To start, cut off the leg of the jeans
• Spread it on the table and put your tablet or phone on it
• Draw the outline of your gadget with chalk or soap
• Fold the workpieces wrong side up, pin them together with pins and sew as carefully as possible
• If necessary, reinforce the upper part with a dense border.
• Turn the product inside out and you can put a tablet or phone into it

How to make stool capes from old jeans?

Idea #1

Idea #2

Immediately I want to say that in order for the cape for the stool to be not only beautiful, but also comfortable, you must definitely put something soft under it. It can be a specially tailored pillow or just a piece of thick foam rubber. Also, do not forget that in order for even such a thing to have individuality, it must be decorated.

For these purposes, bright satin ribbons, lace or ruffle. You can simply sew them on the edge of the cape or fix them with beautiful folds and decorate them with bows. Now let's talk about how to properly sew a cape. If you want to make it as fast as possible, then simply put the stool on the jeans, circle it with chalk, and then cut it out, making an overlap of 1 cm on each side. Stitch the edges of the workpiece, sew to the corners of the ribbon with which the cape will be fixed on the stool.

At the next stage, cut out the foam rubber blank, put it on a stool and you can fix the cape. If you want the product to cover the stool to the crossbar, then in addition to the main blank, you will also have to cut out four side ones, the width of which will correspond to the distance from the seat to the crossbar. When the blanks are ready, you just have to sew them together and your cape will be ready.

How to make potholders out of old jeans?

Potholder from pocket

Jeans pot holder

Butterfly potholder Mitten

In principle, in order to make a kitchen tack out of old jeans, you do not need special knowledge. For example, you can make it from pockets by simply cutting them out and reinforcing them with a thin padding polyester. In this case, you will only need to stitch everything correctly and sew a buttonhole to the finished potholders, for which they can be hung in the kitchen.

If you want your potholders to be as similar as possible to those sold in specialized outlets, then you need to do the following. Take a sheet of paper, put it on the table and put your hand on it. The hand should lie in such a way that four fingers are folded together, and the fifth is laid aside. Circle your hand with a pencil, step back from the resulting line by 5 mm and cut out the workpiece.

It will need to be applied first to the denim, and then to the padding polyester, and draw a contour already on these materials. After that, you will need to cut out four blanks, put them together and sew along the contour. If you do everything right, then after you turn the product inside out, you will get a potholder in the form of a mitten.

How to make an organizer out of old jeans?

Organizer from old jeans

Pocket organizer Whole jeans organizer

A denim organizer can become not only a convenient device for storing small items, but also a real decoration of the interior. Depending on the size, such a thing can be placed on the doors (entrance and furniture), the wall and even on chairs. It can be made strict, bright or slightly childish. In the latter case, you can try to paint it with flowers, animals, or just embroider beautifully.

If we talk about how to do such a thing correctly, then in this case you can do the following. If you do not plan to hang a denim organizer in a conspicuous place, then you can stitch the top of your trousers and fix a rope on the resulting seam, for which you can hang the finished product. Next, you will need to sew the legs together and you can start making pockets.

To do this, you will need sharp scissors, with which you will make cuts along the length of the legs. At the final stage, you will need to sew one part of the slit to the back of the trousers and the organizer will be ready. More creative ideas you can see in the pictures posted above.

How to make flowers and brooches from old jeans?

Jeans brooch

Master class on making flowers

Ideas for making flowers

If you show a little patience, you can make from old jeans, beautiful flower which can be used to decorate clothes, interiors or make hairpins, headbands, chokers and brooches. The easiest way to make such a craft is to cut a piece of fabric from jeans, lay it out on the table, and then use a cardboard stencil to cut out blanks of different sizes imitating a flower.

Remember, the more and fluffy you want to end up with decoration, the more fabric blanks you will need to cut. When everything is ready, you will have to add them up, starting from the largest and ending with the smallest. You can fasten the sheets together with a special glue, or with a simple thread. If you want to finished flower kept its shape as well as possible, you can try to starch it.

As for the edges of the petals, they can be left without any processing or slightly dissolved. Oh, and if you think that a single denim flower will be very gloomy, you can make several petals from a brighter material, such as chiffon or satin.

How to make a rug out of old jeans?

Rug Making Tips

Ideas for weaving

I would immediately like to say that for the manufacture of a rug, some trousers will not be enough. As a rule, it takes approximately 4 jeans to produce one small rug. To make such a thing, you will definitely need to cut the jeans into ribbons, tie them together and twist them into a kind of ball, and then use this kind of yarn to weave a rug with a thick hook.

If knitting is not your forte, then you can make a rug according to the type patchwork quilt. And this means that first you will need to prepare the required number of squares of the same shape, fasten a contrasting border to their edges, and then sew all these blanks onto a dense base.

Braided rug (pigtail)

• Cut old jeans into strips of the same width
• Weave braids from them and connect them together into a long rope
• Pick up the threads that match the color of the fabric, and start sewing the pigtail together
• You can give it the shape of a circle, oval, square or rhombus

How to make a decorative pillow out of old jeans?

square pillow from jeans Shaped denim pillow

If you are sewing for the first time in your life, then you probably know that sewing a standard pillow is the easiest. To begin with, you will need to decide whether it will have a square or round shape, and after that it will be possible to start creating an original thing.

So:

• First, make a stencil desired shape and then attach it to the cut jeans
• Circle the stencil with chalk and carefully cut out the blank
• Fold the blanks with the wrong side inward, and carefully sew everything together, leaving room for the zipper
• Sew in a zipper and fill the pillow with synthetic winterizer or synthetic down.
• If desired, you can decorate the edge of the pillow with denim ruffles or denim flowers.

Video: What to do with old jeans. Ideas: do-it-yourself alterations and crafts