DIY paper mermaid tail. How to make an original, most realistic mermaid tail with your own hands. Paper tail

Every mermaid sooner or later has a desire to swim in the tail of a mermaid.

Parents do not always have the opportunity to buy you a tail. And sometimes they just don't want to and hide behind the words "You're already an adult!"

Or "Why do you need a tail, play and quit!". Familiar? Then this article is for you: you can make your own tail.

So, there are a lot of instructions on the Internet, so this article will focus on materials.

The most important thing in the tail is the fin.

If you want to swim, make sure it's big.

If you need a tail for a photo shoot, check out the fin design.

The fin is the first thing that catches the eye, and if it is dull or poorly shaped, the tail has failed.

Too small a fin will not look very good, take a medium size or large.

For land tails, cardboard is also suitable, but do not be lazy and do it nice shape,

Something round-oval-square with asymmetry, somehow sewn into the fabric, will only repel.

Scuba diving requires more effort and make a real monofin.

It can be made of linoleum or polycarbonate, as well as plasticine boards or other flexible hard surfaces.

Attention, never use org. glass! It can break or crack while swimming and hurt your feet.

Linoleum is good as a tail material because it is flexible and the fin will curve realistically in the water.

But it also has its drawbacks: its weight.

Get used to the fact that you will have to wear a very heavy ponytail, and it will also be very difficult

Sewing Czechs or fabric to linoleum is something, but it is pierced with difficulty.

Threads for linoleum also need to be taken special, super-strong, you can even get by with a fishing line.

But if you want, you can paint the linoleum - believe me, the tail will look spectacular.

The most important thing: take poorly bending linoleum - one that will hang in your hands while still on land,

It will not allow you to swim far under water.

Polycarbonate is the most popular material for making monofins.

And this is a well-deserved fame: it is light and does not bend well, so you can swim very quickly, cutting the water with your fin.

But if you decide to make a polycarbonate monofin, ask your dad to help you in advance - polycarbonate is difficult to cut,

Your tender hands can't handle it. By the way, the site xvostrusalki.ru uses plastic monofins,

Which once again confirms the quality of their tails.

Never leave the fin solid - it looks unrealistic.

Try to draw cartilage, stripes, like Germanic tails - it looks great.

And if you don't like this design or the shape of your fin doesn't allow it?

Think ombre - going from light to dark or vice versa.

Use acrylic or any fabric paints for painting. How to choose the right fabric for the tail,

And remember, if your parents think that your desire to buy a mermaid tail is a fleeting whim,

That made qualitatively and with soul homemade tail convince them you're serious!

Blitz Poll:

Post a photo if you have a favorite monofin shape.

Have you made your own monofin at home?

Of what? What happened in the end?

Is a linoleum monofin comfortable?

Can you swim in it?

What is the most important thing in a swimming monofin?

There is no limit to the imagination of a person, and especially children. They love to draw, cut, play, and come up with all sorts of ways to achieve something. This can happen especially with a mermaid tail, which you can do with your own hands.

If you don’t have the right fabric for crafting at home or you don’t know how to sew, then don’t despair - now we will learn how to make a mermaid tail out of paper.

We will need:

1. Paper

Based on your parameters, as well as the fin, look for suitable size any, but strong enough, paper.

Alternatively, you can use unnecessary wallpaper.

1. Pencil
2. Scissors
3. Paints
4. tassel
5. Decor (beads, sequins, braid, fabric, paper, etc.)

Create blanks

Probably the most difficult thing in this matter is to guess the size of the future mermaid. They can be obtained:

• Wrapping the future mermaid with paper from the waist to the feet;
• Get measurements of the waist, hips, knees, calves, ankles and transfer them to paper;
• Create eye measurements.

H e forget! Leave a piece of paper for the smell, on which the glue will be applied, before cutting out the blank.

At your discretion, draw absolutely any fin, but do not forget that it should hide your feet, so calculate the size.

We cut out our blanks, not forgetting to leave a piece of paper around the edges for gluing together.

Making a mermaid tail

Realizing that paper is a rather fragile material, and a paper mermaid tail is almost disposable, gluing will be the most convenient way to create it.

Making the main leg part wider will make it easier to put it on, maybe even a few times.

We glue the fin, and then glue it to the main part, leaving an opening for your feet. Let the glue dry for the required time.

Mermaid paper tail decoration

Use everything that sticks to paper, show your imagination and originality. For example, you can sprinkle the tail with pebbles or sequins, glue braid, sequins to it, interesting fabric, outlining the belt or fin.

You can also paint the mermaid's tail, both with scales and with patterns, for example, like Barbie the mermaid or H2O mermaids in the store.

Now you know how to make a mermaid tail out of paper in a simple and straightforward way, using improvised materials and your imagination. It is a pity that you can’t swim in such a tail, because it will immediately deteriorate. But the tails from the site store will allow you to swim like the real fabulous inhabitants of the seas and oceans - mermaids.

There is no limit to the imagination of a person, and especially children. They love to draw, cut, play, and come up with all sorts of ways to achieve something. This can happen especially with a mermaid tail, which you can do with your own hands. If you don’t have the right fabric for crafting at home or you don’t know how to sew, then don’t despair - now we will learn how to make a mermaid tail out of paper. We will need: Paper Based on your parameters, as well as the fin, look for a suitable size of any, but strong enough, paper. Alternatively, you can use unnecessary wallpaper. Pencil Scissors Glue Paints Brush Decor (beads, sequins, braid, fabric, paper, etc.) Creating ...

Carnivals, matinees, songs and dances under an elegant Christmas tree are essential attributes of the New Year holidays. And, of course, for such events, you definitely need to get an interesting costume, because the fun is always doubly interesting when the holiday is costumed.

Mermaid is a great costume idea

However, what outfit to choose for your child for the New Year's holiday, because different snowflakes, princesses, bears, bunnies, wolves and chanterelles are long-used options, and every parent wants their beloved child to be the brightest on the matinee? Of course, boys will prefer superhero costumes, but girls will definitely appreciate the idea with the Little Mermaid outfit. The image is quite interesting, but how to create it? This article will discuss how to make a mermaid tail at home.

Image details

Naturally, in order for the image of the well-known cartoon heroine to be complete, you will need a red wig and some interesting flower in your hair. However, these are more minor details. And so that no one has any doubts about the costume, it is imperative to reproduce, so to speak, the main parts of the body. And here the question arises: "How to make a mermaid tail at home?" Perhaps the fastest and easiest way is to sew this part of the costume. More long time knitting will take, although if there is absolutely no friendship with sewing and cutting, then this option will be an excellent alternative.

materials

So, first you need to figure out how to make a mermaid tail as realistic as possible at home. First of all, the right choice of fabric is important. Today it is not a problem to pick up a silver-colored material in the store, stitched or glued with sequins, which perfectly resemble fish skins. It will be quite enough to have a segment with a width equal to the girth of the hips, and a length from the waist to the middle of the lower leg. For the bottom of the tail, you should choose a transparent fabric, such as hard tulle or organza. With the latter, of course, you will have to tinker and strengthen the edges with a thick fishing line, but it's worth it.

How to cut out details

Speaking about how you can make a mermaid tail, you need to clearly imagine at least its outlines. So, this is a silvery skirt with large fins made of transparent matter at the edges. In order for these most distinctive details to create the desired image, they need to be cut and stitched correctly. To do this, make a skirt with a carved hem. What does it mean? Slightly above the knee of the skirt, the skirt is cut towards the middle on both sides. In the future, a part of the caudal fin will be sewn to these sections.

Further, from the same height just above the knee, measure the distance to the floor. A circle is cut out of tulle or organza with a radius equal to the previously taken measurement (from a point above the knee to the floor). And they cut out the corresponding hole in this part with recesses for attaching the base of the tail. To make the fins lush, you can sew assemblies along the entire length in several rows. For this purpose, it is also best to cut the fabric on the bias, in order to obtain beautiful wavy edges during processing.

What about a mermaid doll?

The idea of ​​a fish tail will delight girls not only when it comes to New Year's costume. After all, almost every girl, having seen a cartoon about the beautiful Ariel, will want such a toy for herself. And for this it is absolutely not necessary to spend a lot of money, since making a mermaid tail for a doll is as easy as shelling pears! Great, if a similar costume was already sewn for the daughter herself, and there were a lot of patches left, if not, then you will have to select fabric or wide satin ribbons. The process of creating a tail for a doll can be somewhat simplified by sewing a pouch for legs, cut down with a corner from a material that matches the color. But the fins are easy to make from organza ribbon. Moreover, it is absolutely not necessary to process the edges of the product on sewing machine, because they can only be melted over a candle.

In order for the tail to fit well on the chrysalis, its size should be correctly calculated. The easiest way is to put your pet on a piece of paper and circle her legs along the contour from the waist down on one side and in reverse order on the other. As a result, an excellent template will come out, which needs to be finalized a little more. To do this, add about a centimeter along the edges to decorate the seams, and draw a beautiful corner to the bottom of the pattern. It should not be too long and narrow so that the details can be easily worked on.

But how to make a mermaid tail at home so that it looks like a factory one? Here you will need to work hard and pay special attention to accuracy. Details of the fins should be sewn to one of the parts of the main tail, and then sew the second main part. So it will be possible to make the junction of the two materials invisible. The stitches must be even and small, otherwise the seam with front side will be too rough and, even worse, slices will turn out through large holes.

A thin rubber band should be sewn to the top of the tail so that it fits well to the pupa's waist, but before that, the upper cut of the fabric should be scorched so that the threads do not come out. Do not be afraid and worry that something will not work out, because almost all works of art were created by trial. And even if at some stage of work it seems that the idea is not feasible, there is no need to give up. Be sure to bring the matter to the end, since making the mermaid tail itself is quite real! And although sometimes at the intermediate stages of work the product may indeed seem completely unattractive, it is worth remembering that any defect can be corrected.

For example, if the tail is completely the wrong shape, it can be corrected by the amount of fabric on the fins. Sewn-on details cut out in the form of droplets from a thin iridescent and transparent ribbon will look great here.

Summing up all of the above, we can say with confidence that, knowing how to make a mermaid tail at home, you can not only please the child with a chic costume on new year holidays, but also to give joy on the most ordinary day by offering joint creativity.

No wonder the Mermaid costume remains so desirable for little princesses from year to year. Each of them wants to try on a bright tail with scales and become the real queen of the school Christmas tree or a holiday in honor of Neptune's day. It is quite possible to make such a costume at home. Since the tail is its most important detail, it is necessary to start with it. In order to get a really interesting unique accessory, you don’t need a professional seamstress at all. There are a lot of ways to create the product under discussion.

Handmade mermaid tail

Anyone who knows how to crochet will be able to apply this skill and make a great mermaid tail. As a rule, this requires yarn of blue, green or purple. But you can also be original, using even red, pink or yellow threads. Such a costume will turn out even more vivid and original.

Various additional accessories are easily attached to the surface of the yarn. Therefore, if in the end the product does not turn out to be spectacular enough, it can be made more interesting by decorating it with embroideries, appliqués, improvised shells and other small details.

Surely needlewomen will be pleased with the fact that the production of such an accessory does not take much time. Especially if it is created for a child. Enough to purchase large hook and thick yarn of the selected shade to actively get to work.

The discussed tail is knitted in a circle with columns (two crochets). If you wish and if you have certain skills, you can use and openwork technique. In the resulting model, the newly made mermaid will be especially convenient and comfortable, due to the fact that the yarn stretches easily. Therefore, the resulting accessory will allow you to feel free, and it will not hurt to pull the skin.

Tip: "If desired, you can add on top ready product frill, elastic band, lace, ribbon and other additional details. After the tail is tied almost to the end, a dense plastic in the form of a fin is tied at the very bottom at the level of the ankles. It is either left in its original form, or also tied in a circle.

Look great on girls openwork models, for the creation of which thin graceful threads were used. True, it will be difficult to make this version of the costume at home, so you should do it long before the holiday. This method is not suitable for emergency production of an accessory on the eve of the celebration.

Handmade mermaid tail

For needlewomen who do not know how to knit, also do not be discouraged, because in this case it will be possible to sew it. You can do this in different ways

First way

1. To start, choose a fabric suitable color and structures. A mermaid tail made of shiny or openwork material looks very impressive, but ordinary cotton can also be used. Moreover, there is an opportunity in the future to decorate it effectively on your own.

Experienced needlewomen note: “The ideal material for the outfit under discussion is stretch. As a result, the child will be comfortable in such a “tail”.

2. A rectangle is drawn on the fabric, the width of which will be the girth of the hips of the future princess of the seas, multiplied by 1.5, and the height is the length of the planned product. If desired, you can slightly round the bottom corner with sharp scissors.

The discussed model is sewn very easily and simply. First, it is sewn along the entire length, and then the fabric is gathered together from below and a fin made of cardboard, paper, more is attached to it. thick fabric, tapes and any other materials. It can even be just a piece of cardboard.

Second way

It does not have to make any measurements and calculations.

In this case, you do not have to make any measurements and calculations.

1. First, a straight skirt is simply sewn from a piece of fabric. It is best to take care of the wedge in the back seam, which will allow the wearer of the suit to move easily in it.
2. The fin is attached directly to the wedge. It is best to first draw it on the selected fabric, then cut out two identical parts, sew together and stuff them like pillows. The main thing is that such a tail does not turn out to be too heavy. This is especially important if the child is small. It is convenient to fasten the fin after the suit has been put on by its owner.
3. A very interesting and light bottom of the product is obtained from foam rubber, which is sheathed with fabric on top in a color or a contrasting shade. The main thing is that it does not reach the ground, otherwise it will be extremely inconvenient to walk in such a suit, constantly stepping on the tail.

Product with imitation of scales

If you have time to create a Mermaid costume, you can try to make an imitation of scales on its surface. This will turn the outfit into a more spectacular, original and believable. There are several options for how to do this.

First, it’s worth talking about the simplest of them - this is the use of ordinary beads, beads, sequins and other details. You can buy them at any craft store. True, you will have to work on your creation, sewing crystals or beads over its entire surface. But the result will justify all the work. The little mermaid will surely be the brightest and most beautiful of the whole holiday.

Alternatively, small pieces of polyethylene can be used to mimic a real fish tail. To do this, pieces are cut from a single sheet of material, similar in shape to scales, but bigger size. It is best to pre-draw them on polyethylene. They will look like ovals, evenly cut on one side. On the fabric, these decorations are arranged in dense rows close to each other. The cut part of each "scale" goes up.

You should start from the very first bottom row, and then move up to the very end of the selected piece of fabric. In order for the product to come out beautiful and neat, it will be necessary to deviate slightly from the cuts each time. The oval edges of the second seam should cover the seam. So the future tail of the mermaid is stitched row by row.

If time is limited, and you really want to create scales on the resulting accessory for a themed holiday, then you can turn to paints or even felt-tip pens for help. The painted scales will look no less bright and interesting. It is best to choose the most daring and bright shades for her.

Another material for the express creation of the discussed outfit at home is foil. True, in this case it will need a lot.

Tip: “Today you can buy foil in stores different color. Gold, silver and dark green material looks great in such a suit.

With large pieces of foil, you just need to wrap the legs of the future mermaid, leaving a place below so that she can walk comfortably. The fin is also made from the same material. The foil in several layers turns out to be very dense, so you can fasten it freely, and not back to back, so that the child can comfortably rearrange his legs.

How to make a mermaid tail? You may ask this question for at least two reasons. The first is a photo shoot and a tail as a necessary attribute to it, the second is that the child asked to make a tail because a theme party is coming. So what is needed in order to make a tail with your own hands?

How to make a mermaid tail - fabric

A mermaid's tail requires fabric that looks like scales. Look in the store for iridescent fabric - hologram or with sequins. The chosen fabric should be elastic, easy to stretch and fit nicely. The color of the fabric is any, for the image of the tail it is not necessary to make only blue or green. Take two meters of fabric, let it be a little with a margin. Also stock up on threads to match the color of the fabric and an elastic band to make a belt.

How to make a mermaid tail - buy a fin

You can make a fin out of fabric, but it will look a bit unnatural. For a good fin, a monofin is perfect, it perfectly follows its curves. You can buy a monofin in a specialized store or in an online store. Choose a monofin in a neutral color so that it does not show through the fabric.

How to make a mermaid tail - pattern

You need to lie down on paper and trace the outline of your hips and legs on it. Then cut out the tail. Lay the pattern on the fabric, fold the fabric in half and circle the contours from the inside with chalk. Be sure to allow a couple of centimeters for the seams. Now cut out what you have from the fabric. You should get two halves - back and front. The monofin also needs to be outlined and two halves cut out of the fabric, like the tail.

How to make a mermaid tail - sew

On a typewriter or by hand, connect both halves and sew the tail, insert the monofin and sheathe it with fabric too. Sew an elastic band around the waist.

The mermaid tail is ready! Now it can be used for photo shoots and parties. Thanks to the monofin, you will be able to swim in the sea and the pool with a tail. As it turned out, making such an attribute is not at all difficult, it requires only a few skills in cutting and sewing.