Shapes from paper triangles. Origami. How to make a module and what can be done from a module. Step by step instructions How to make an origami module

In the world of needlework, there are a lot of ideas, the implementation of which allows you to make simple crafts on New Year or on another holiday to please yourself and your loved ones. Modular origami for beginners is very interesting activity. A person can learn how to create small figures from modules quite quickly, it's easy. There are simple schemes on the Internet, the description of which will allow you to make a rooster out of paper, a temple, a flower, etc.

Using this technique, even from white paper, you can step by step create products of incredible beauty. New Year's pictures and patterns, a variety of animals - you can't count everything. For beginners, it is better to take something light, from a small number of modules, for example, from 20.

Modular origami for beginners is a very interesting activity

Step-by-step instruction:

There is an option to purchase a separate paper in the stationery store for modular origami. But for assembling a rooster, the usual one will do. colored paper however, it is thinner. It is recommended to use yellow material.
A square sheet of paper is folded in half. The resulting side strip should be folded and cut along the fold line.
The paper is then folded in half to form a rectangle.
It is important to ensure that the top and bottom edges match. The fold line should be ironed.
After that, the sheet unfolds. The square is folded again, only this time on the other side.
The paper is folded vertically, that is, from left to right.
After the fold is made, the leaf unfolds. If everything was done correctly, then there should be a cross in the center of the sheet.
The upper right corner is applied to the lower left corner. Then a fold is made. The action is repeated, but only on the other side.
The right bottom side of the paper with the crease is folded towards the center. The resulting square is folded into a rhombus. In this method, triangular leaf shapes should not be obtained. If the figures of triangles were formed, this means that the needleworker did not follow the plan correctly.
The corners of the figure must be collected towards the middle. The top corner is adjusted to itself. Next is the fold. Three other folds are folded back.
The top corner of the square rises up along the fold line. The other two folds fold inward.
The upper edges of the sheet are folded inward. You need to straighten them out.
The outer edges of the resulting diamond are folded in the center. The right fold folds towards the left.

At the last stage, the figure is flipped, and the top corner of the bottom layer is folded to the top corner.

Gallery: modular origami (25 photos)

Modular origami for beginners: swan (video)

Herringbone using modular origami: step by step instructions

Such a three-dimensional creation, like a paper Christmas tree, can decorate pictures, stands or wooden decorative boards.

So, detailed technique:

The Christmas tree should be made of green paper. You can use both colored and plain paper. If the choice fell on the usual one, then you should use paints so that the material acquires a green tint.
Collect the Christmas tree should be from a square sheet. Fold lines are made in height, width and diagonals. The paper unfolds.
Then the basic model of the figure is formed - a triangle. A fold line is outlined in the figure. Right side turns to her.
Next, use the fold line so that the right corner of the figure is centered on the base of the triangle.
All corners are wrapped.
Then you need to use scissors so that the Christmas tree then becomes voluminous. Three cuts should be made on the right and on the left side.

Such a three-dimensional creation, like a paper Christmas tree, can decorate pictures, stands or wooden decorative boards.

At the last stage, the resulting segments are bent to the sides.

Small human figurine: a simple description and diagram

For every detail of the little man, you can use paper different colors, for example, make the top yellow and the pants blue. But to simplify the task, it is better to use a single-color material. A pencil is not needed to create a little man.

So, the square material is bent in half, then the side corners of the figure are bent.
A zipper fold should be made at the bottom of the sheet. The corner drops at the top. Then the figure is flipped.
The corner is slightly bent. You do not need to bend it too much, just slightly outline the fold line.
After that, you need to carefully flatten the "pockets" of the resulting figure, bending the resulting triangle.
One half of the product is bent back.
The corner is pulled up, part of the paper is pulled out. An elongated figure is an almost finished little man.
After pulling the shape up, only the "nose" of the triangle should remain visible.
The corner bends inward, and the man's head rises up.
The remaining upper corners are bent inward on each side.

For each detail of the little man, you can use paper of different colors.

At the end, the arms and head of the little man should be glued to the body.

Tips for those who are engaged in modular origami

By connecting several origami with a thread, you can decorate a room with this. Lots of ideas! For example, you can hang crafts on a nail by the door. It looks very nice, especially if the origami is multi-colored.
A beginner who wants to improve his skill can experiment with different materials and flowers.
Thread origami through the thread must be very careful not to damage the paper.
In such work, it is recommended to use thin paper designed specifically for modular origami. Why? It is thinner and easier to work with. Although people who fold paper very intensively can tear it, but if everything is done carefully, then the craft turns out to be very beautiful.
Origami is a great gift. By the new year, you can make a Christmas tree, and by February 23 - a tank.
There is an alternative material for creating modular origami - this is foil. From it, crafts are more durable, besides, they are shiny.
To follow the ecological conservation plan environment, you can use not new, but recycled paper.
If a person plans to donate origami, then the last step of its completion is recommended not to be done in advance, but before delivery. So the craft will not look "rumpled".

To create a beautiful craft, the main thing is to make smooth edges. That is why it is not recommended to use poor quality material. If the sheet is torn, then elegant origami will not work.

How to make modular origami in the shape of a heart?

Take a piece of paper square shape. The colored side is turned upside down. The top left corner folds towards the center. The edges should be evenly attached to each other.
The action is repeated with a different angle. As a result, the material should have several fold lines. There is no need to unfold the leaf after this.
The bottom of the material is folded towards the center.
Then the leaf is completely straightened and turned over to the other side. If before that everything was done correctly, then a bulge should form in the center of the sheet.
Next is a horizontal fold.
The sheet is turned over again.
The two edges of the paper are folded towards the center. The edges of the shape should touch.

Master class on making origami photo frames

The master class is designed to be held with pupils of senior and preparatory groups.

Purpose: making gifts, decorating gifts.

Target: development creativity children.

Tasks: To develop the imagination of children, to cultivate the desire to make gifts, to form an artistic taste.

If a girl, or maybe a boy

I suddenly like an unusual book,

We can confidently say:

This child can dream

Wants, as an adult, to create his own world,

Settle birds and animals in the forests.

An adult will help create this fairy tale,

The main thing is to make a hint in time ...

The Magician Who Invented Colored Paper

Red, yellow and blue

He believed, probably, that the guys can

Make figures from different squares.

These figurines all over the world

Only Japanese children knew.

The white crane became the symbol of peace,

The symbol of friendship is a paper boat ....

... Into the sky of aspiring yellow birds,

Quickly fluttered from paper pages,

Fairy butterflies, Pink hares

You can do it with your fingers.

We invite you to try with us

Learn the origami technique!

Material: to make a frame, you will need office colored paper, PVA glue, scissors, cardboard, laminating film, a pen core.

Origami frame making step by step process

In order to make beautiful origami crafts (animals, ships, flowers, etc.), you need to learn how to make a module. From these modules you will continue to collect beautiful and interesting crafts.

Beginning of work: We take a sheet of A4 paper.

We divide it into 16 parts.

We cut it, we get blanks for the manufacture of modules.

In order to make a module, it is necessary to fold the workpiece as shown in the figure.

This is the module you should have.

Now we start making the frame itself, inserting the modules into the pockets of other modules, as shown in the figure.

We close in a ring.

I do modules of a different color according to the same principle.

The second ring of modules should be slightly larger than the first.

Cut out the cardboard with the diameter of a large ring.

We apply glue to the cardboard, leaving the part not glued to insert a photo.

Glue.

In childhood, each of us collected paper crafts. Ships, airplanes, frogs are traditional paper toys. However, the hardy Japanese did not stop there. Origami is a whole culture, the art of paper plastics. In today's article I will introduce you to one of the types of this art - modular origami. For some reason, I wanted to remember summer today and I bring to your attention origami chamomile flowers. This very beautiful, pure flower will look great in a composition on your desktop. After all, warm rays of the sun blow from him, looking at him, you always want to go on vacation. At the moment, I will offer you camomile origami scheme - the easiest to work with. When you master this amount of work, you will definitely create another scheme, a heavier, but charming chamomile according to a different scheme.

Already from the name it is clear that these crafts are based on modules that, when inserted into each other, are assembled as a constructor. Therefore, the first thing we need to master is the creation of a module. To do this, we need a regular A4 sheet 1. Cut the sheet into 16 equal parts, as shown in the figure.

2. Take one sheet and bend it in half.

3. Once again in half and turn back. Flip the fold towards you

4. Follow the lines, fold the edges to the center.

5. Turn over and bend the lower lapels up. At the same time, we bend the remaining corners for a triangle.

6. Unbend, folding small triangles along the marked lines, and again bend the lapels up. Fold in half.

7. The module is ready.

8. On the one hand, it has a pocket that we will need during assembly.

Don't be put off by such a long description. In fact, the module itself is assembled elementarily and very quickly. It is worth figuring it out once, and then your hands will twist the modules by themselves. The next thing you need to know before proceeding with the assembly - the module has 2 sides: Short:

and long:

This is important, because during assembly we will connect the modules along the long or short side. And finally, we turn to the process of creation itself. I will show you one a simple circuit from modular origami. Having mastered it, you will be able to take on more complex models. Chamomile scheme, the first and second rows will be assembled from 20 modules Pink colour. When assembling, the module is placed on the short side, as shown in the picture.

We add the third row of 10 yellow modules, put the module on the long side. At this stage, be careful, the tails of neighboring modules are connected. That is, we get a connection in a checkerboard pattern.

After that, we turn our flower over and we will make the rest of the rows in modules on the short side.

Fourth row - 10 yellow modules.

Fifth row - we put 2 elements on each module. The assembly takes place in such a way that the free pocket is inside. Thus, we need 20 white modules.

The last sixth row will consist of 30 white pieces. We put on 3 elements for 2 modules, again free pockets should be inside.

The flower itself is ready, it remains to make the stem and leaves. To do this, we need a regular straw and green tape.

We wrap the straw with electrical tape, make leaves from colored paper or from all the same electrical tape. Insert the stem into the center of the flower. To do this, squeeze the chamomile petals a little, and a hole for the straw is formed on the back side. It must be said that special fastening is not needed, the stalk will hold perfectly anyway.

Make a few more of these daisies and you will have a beautiful spring bouquet. Such a craft can become a good gift friends and relatives.

Modular origami: flowers

In general, there are many types of origami. We offer to try your hand at volume. To create such figures, a large number of identical elements are used - modules that are inserted into each other. The most commonly used is the triangular module. As a rule, it is folded from small pieces of paper, which are then inserted into each other. All leaflets for modules must be the same size. Most suitable is 1/16 or 1/32 of the landscape sheet. So, let's move on to creating modules:

As you can see, the module has two bottom corners and two pockets, thanks to which they can easily be inserted into each other. This is how origami flowers are created from triangular modules.

However, in addition to the triangular modules, you will need 1 kusudama module for the core of flowers from the modules.

Fold a square piece of paper in half with the right side inward.
Having unfolded it, we fold it in half again, but in the other direction.
We unfold the workpiece, fold it inside out diagonally in half.
We unfold the part again and fold it diagonally, but in the other direction.
Having unfolded the workpiece, we turn it inside out towards us.
Along the lines that were obtained by folding diagonally, we fold the square.
Bending the edge of the square, flatten it in the middle.
Turning the square over, we do the same with the 3rd edge, as well as 2 and 4.
1 edge of the part is bent 180 degrees. We see only its reverse side.
We bend the edge so that the edge is along the fold line of the workpiece.
We do the same with the 2nd rib.
After that, the triangular edge between the bent ribs must be bent to the top of the module.
In the same way, in pairs, we add 5 and 6, 3 and 4, 7 and 8 edges of the workpiece.
We expand the entire workpiece.
We work with wrong side. We begin to fold and assemble the part, as shown in the photo.
In the same way, add the other three corners of the workpiece.
Our module is ready!

Modular origami flowers: master class

And now let's proceed directly to the assembly of the cornflower flower. To do this, you will need to make 10 blue, 10 green and 70 blue triangular modules and 1 Kusudama module of blue color. The assembly diagram of the modular origami cornflower flowers is as follows:

1. 3 rows are assembled immediately:

1 row - 10 green modules;
2 row - 10 blue modules, worn with the long side out;
3rd row - 10 blue modules, worn outward with the short side.

We get a small flower.

2. Turn the flower over to the other side and add the 4th row of 10 blue modules.

3. In the 5th row, 20 blue pieces should be put on. This is done in such a way that each previous module has 2 modules. Loose pockets should be inside.

4. In the 6th row, 30 blue modules are used. For each previous 2 modules, 3 modules are put on: 1 module is located in the center, and 2 side ones so that the free pockets are inside.

5. The Kusudama module is inserted into the core of the flower.

6. We make a cornflower stem. To do this, cut out from the tube for cocktails upper part, we don't need it.

We wrap the tube with green paper and cut out the leaf.

7. To the bottom central part flower, insert the stem. Ready!

So, knowing how to make a flower from modules, you can easily create a whole bouquet of cornflowers. It is best to place a bouquet in an origami vase from modules. It's a completely different story!

From the modules you can make a vase for flowers, and other figures, for example, a hare.

Master class Craft product Origami Chinese modular Modular origami "Lotus" Paper Glue

I have seen a similar lotus on the Internet more than once, but here, just like the scheme, there is nowhere (at least I didn’t find it). Many are looking for a scheme or a master class, I decided to help))) This is the lotus we will do today )) For him we need: white -271; pink - 1064; green - 780 The size of the modules is 1/32.

So, let's begin))

Thus, we collect 2 rows of 8 pieces in each row. We close the chain.

The third row is 16 pieces. We dress in this way (the photo shows a different color).

Fourth row 16 modules. dressing in the usual way.

Carefully, holding the edges, turn the workpiece inside out.

Fifth row 32 pcs. We add the same as in the photo number 5, only with the reverse side.

Sixth, seventh and eighth rows of 32 pcs. in every row. We dress normally.

Ninth and tenth rows of 32 pcs. but we dress with the long side out. The ninth row is white, the tenth is pink.

Now we collect the upper six-leaf (that's what I call it). We collect 2 rows of 54 pcs. in each row. It is better to stick on glue.

Third row 1 white, 8 pink, 1 white, 8 pink, etc.

Fourth row 2 white, 7 pink, etc.

Fifth row 2 white, 6 pink. We dress in this way.

Sixth row 2 white, 5 pink, etc.

Seventh row 2 white, 4 pink.

In the eighth row 3 pink, in the ninth-2, in the tenth-1.

The eleventh row is 2 white, the twelfth row is 1 white. Our six-leaf is ready.

Now we make the bottom six-leaf. We collect 3 rows of 66 pieces.

Fourth row 1 white, 10 pink, etc.

Fifth row 2 white, 9 pink, etc.

Sixth row 2 white, 8 pink, etc.

We slightly raise the center of the upper six-leaf and carefully insert the crown of our flower into the hole.

This is what it looks like from the back side.

It is advisable to glue the junction with a heat gun.

We glue the lower six-leaf, bend it in the shape of a lotus.

And here are our leaves. We collect 6 rows of 39 pcs. in every row.

Seventh row. We dress one module on one beam. Thus, 78 pieces come out in a row.

The next row, we already dress 12 modules in the usual way, skip 2 rays, dress 12, skip 2, etc.

Then 10,9,8,7, etc. Here are the leaves ready))

We connect all the details and voila))) Our lotus is ready)))

Here it is in red :)

THANK YOU SO MUCH to everyone who looked)) This is my first MK)) I hope I explained everything clearly))

Modular origami is more complicated than simple origami for children and requires attention, perseverance, spatial thinking and patience. However, modular origami is not difficult to fold. The main thing is to be careful! Flowers in modular origami take pride of place. Along with thematic figures for the holidays (for example, Easter Egg on a stand using the modular origami technique) are created from simple modules. It is a little more difficult to make bulk modules. For example, the primrose flower. It turns out he is beautiful and strict.

For work, we need the following materials:

a square of origami paper with a side of 10 cm.

How to make a primrose flower in modular origami:

1. From origami paper, you need to fold the basic shape of a double square.

15 row-18 white, 2 pink, 16 row-17 white, 2 pink, 17 row-16 white, 2 pink,

18 row-15 white, 2 pink, 19 row-14 white, 2 pink,

20 row-13 white, 2 pink,

21 row-12 white, 2 pink, 22 row-11 white, 2 pink,

23 row-10 white, 2 pink, 24 row-9 white, 2 pink,

25 row-8 white, 2 pink, 26 row-7 white, 2 pink,

27 row-6 white, 2 pink, 28 row-5 white, 2 pink,

29 row-4 white, 2 pink, 30 row-3 white, 2 pink,

31 row - 2 white, 2 pink,

32 row-1 white, 2 pink, 33 row-2 pink, 34 row-1 pink

crafts from modular origami

big flower

Modules 1\32 sheet a4

1-14 rows-10 white modules, 15-18 rows-20 white, 19 row-19 white, 1 pink,

(we begin the formation of a flower by reducing the white modules)

20 row-18 white, 2 pink, 21 row-17 white, 2 pink, 22 row-16 white,

2 pink, 23 row-15 white, 2 pink, 24 row-14 white, 2 pink,

25 row-13 white, 2 pink, 26 row-12 white, 2 pink,

27 row-11 white, 2 pink, 28 row-10 white, 2 pink, 29 row-9 white, 2 pink,

30 row-8 white, 2 pink, 31 row-7 white, 2 pink,

32 row-6 white, 2 pink, 33 row-5 white, 2 pink,

34 row-4 white, 2 pink, 35 row-3 white, 2 pink, 36 row-2 white, 2 pink,

37 row-1 white, 2 pink, 38 row-2 pink, 39 row-1 pink

DIY modular origami

Petal

1 row-1 green

2 row-2 green

3 row-3 green

4 row-4 green

5 row-5 green make 2 parts and connect them

6 row-6 green

7 row-7 green

After connecting, we continue to collect the sheet

8 row-13 green modules

9 row-14 green

10 row-13 green

11 row-14 green

12 row-13 green

Reduce around the edges

13 row-12 green, 14 row-11 green, 15 row-10 green, 16 row-9 green,

17 row-8 green, 18 row-7 green, 19 row-6 green,

20 row-5 green, 21 row-4 green, 22 row-3 green, 23 row-2 green.

24 row-1 green

Core callas

For the stems, I took the wire and wrapped it with green strips of paper.

Modular origami cornflower

Modular origami is the most difficult section in this art of paper crafts. But the appearance of what is done in this technique easily covers all the difficulties associated with it. There are many schemes for beginners on which you can hone your skills.

Origami from triangular modules: preparation of basic elements

In modular origami, the main difficulty is not so much the process of adding individual elements and their subsequent arrangement, but the need to make a large number of details. Even a small craft takes more than 100 triangles, and in large compositions the score goes to 1000. Therefore, beginners are strongly recommended to practice adding basic modules before starting to make a large batch of them for a specific craft.

Almost any paper can be used for modular origami: from color to newspaper, magazine, etc. The main requirement for it is flexibility. The sheet should be easy to fold and hold the resulting shape, so too dense is not suitable. Their size is chosen arbitrarily, it is much more important to maintain an aspect ratio of 1:1.5. The most commonly used rectangles are 53 by 74 and 37 by 53 mm. If there is no experience in working with triangular modules, it is better to take larger size: Otherwise, difficulties may arise in the final stages of adding the part.

The manufacturing scheme of the base element will not cause difficulties even for a child. The rectangle is located horizontally, after which it is bent in half along the longitudinal line. The next step is to mark the middle line, for which the paper is bent along the vertical axis and unfolded back. For a better effect, you can repeat the place of the fold by holding it with the back of the scissors blade.

Now the edges of the rectangle are bent inward and downward, along the diagonals extending from the top of the intended axis. After folding, the edges should touch each other with their outer sides, and the resulting figure will resemble a triangle planted on a rectangle.

Then the figure is turned to the wrong side, the outer corners of the parts looking out from under the triangle are bent inward and up diagonally. They should lie down so that they do not overlap the base of the triangle, but are aligned with it. Then, along the line of this base, the entire lower part, peeking out from under the triangle, bends upwards, fitting on it.

And at the final stage, along the vertical axis outlined at the very beginning, the module is folded. When finished, it has sharp corners and "pockets" on outside, near the fold.

Origami from triangular modules: a vase

Beginners are advised to try their hand at the maximum simple crafts: for example, vases from triangular modules. Often the general shape of the product does not undergo any special changes, and the main factor for varying it appearance a drawing appears, which is laid out in modules different colors. There are about 1220 elements per low sculpture, which will be approximately 32 rows in height and 48-50 modules for the widest part. You can calculate the specific number of details if you first make a sketch of the vase pattern. For example, make the 4 bottom rows in the same color, and on the next 5 add rhombuses, whose width and height will be identical - 3 modules each. You can add a frame to them, and also start laying them out not from the 5th row, but from the 1st.
To lay the foundation, 48-50 modules are connected in a circle. This happens as follows: 2 triangles are placed next to each other, their lateral sides are mirrored, and adjacent corners are entered into the “pockets” of the 3rd triangle. According to this scheme, all elements are connected, and the resulting chain closes at the right time. The row that will be on it is created by pointing new modules to the lower ones, while in the case of a vase, it is necessary to push the details outward a little in order to gradually expand the shape of the product. When you need to go to the narrowing, the modules, on the contrary, will wind up a little inward. In total, 18-20 rows are needed on the pot-bellied base of the vase, after which the neck can be removed.
Since this part of the vase is supposed to be narrower, the number of modules in the ring is reduced by 2 times, and therefore new circle. It will be 13-14 rows in height, which are laid out already through narrowing and expanding to the top. The border can be arranged separately, for example, by laying the modules on their side and fixing them with glue. The neck itself also needs to be put on glue, since it will not work to fix it by classically putting modules on top of each other.
If you want to get a more original shape of the product, you can modify the neck and even immediately fix it on the base of the vase. To do this, every 7 elements on the last top row, modules are put on, positioned so that there is no shift either inward or outward. These peaks need to be repeated 2 more times, putting on them modulo. The result is 6 ledges that already have 3 single rows. They should be extended to the desired height, not forgetting to draw a concave shape. Depending on the size of the vase, the number of modules placed on top of each other will be calculated.
At the final stage, a border is created that connects the disparate lines of the neck into a single neckline. A corner of a new module is inserted into each upper triangle from under the bottom so that free corners go to the sides. The sides of additional parts will be applied to them, and from above they will be fixed by triangles put on them. This will stretch the “bridges”, which form the border of the neck of the vase. If you wish, you can add 1 more row of modules on them, fixing the result and increasing the width of the finish.

Paper origami from modules: swan

Those who have mastered the basic scheme of the vase can try a more complex sculpture - a swan. It takes about 700 modules to complete, the number of which varies depending on the height of the craft. The row, which is the base, contains 32 modules assembled in a ring. The next 6 rows line up with a tendency to expand, but the number of elements remains unchanged.

The new stage is a smooth transition to the swan neck, which will take only 2 modules in width: this zone does not need to be touched, continuing to lay out the rows up. From it in both directions it is necessary to launch 13 modules, which will become the bases of the wings. Their height will be 13 rows, each of which will decrease in width by exactly 1 module on the left and right. Thus, the wings will narrow as much as possible to their top, and it is advisable not to forget to create a natural bend for them, shifting the details in and out.

From the side opposite the head zone, the tail is lined up with the same narrowing upwards: since only 4 modules are given to it, the height will be equal to the same figure, and it will be short. The swan neck can be of any height, because it does not change the width.

Origami from triangular modules: schemes and ideas

If you can already easily make more than 1 thousand modules, and simple creatures narrowing and expanding ring rows do not cause difficulties, an immense field of activity opens up before you. A lot of schemes for modular origami have been invented. Those parts that cannot be connected by simply inserting the elements into each other are fixed with a glue gun. Otherwise, there are no difficulties with the work.

Charming tulips will be a worthy filling for the vases discussed above from the modules: the flower heads consist of 7 rows of 14 elements, and 2 petals taper for another 4 rows. The stem and leaf are created from ordinary colored paper using the classic origami technique.

By analogy with a vase and a swan, luxurious peacocks are created, in which, after 6 even rows of 34 modules on the 7th, 10 are separated to narrow into the chest and neck, and the remaining 24 gradually expand upwards, forming a lush and colorful tail.

Be sure to try to make a simple origami craft from triangular modules. Despite the large time costs, it is very interesting. Especially if you do it together with children!

Origami- the ancient art of creating figurines by folding paper. You can make both flat and voluminous things using the origami technique. Crafts from triangular modules are interesting. Modules are the same elements that are made up of small pieces of paper. Then these modules, nested inside each other, create beautiful three-dimensional figures. We suggest you make crafts from triangular modules for beginners.

Paper crafts: triangular modules

Let's start by creating triangular modules. A sheet of A4 paper must be cut into 16 identical rectangles with sides 53x74 mm. Having bent the rectangle in half along the length, it is then again bent in half in width and unfolded. After that, the edges of the paper are brought to the fold line. Then the module is turned over, and at the lower edges the corners are folded to the triangle. It remains only to completely bend the bottom edge up to the triangle and fold the module in half. As a result, each module has two corners and two pockets with which they are attached to each other. Usually the corners of one module are inserted into the pockets of another.

Crafts from triangular modules - vase

It will turn out from 706 white, 150 red, 270 lilac and 90 yellow triangular modules. The craft will be assembled by putting the modules on top of each other.

So, it will be necessary to assemble a vase according to the above scheme.

Crafts from triangular modules: swan

The original and rainbow is obtained from 500 triangular modules of different colors.

We start the assembly by creating the first two rows. For this, the corners of two triangular modules are inserted into the pockets of the third.
After that, we take another fifth module, adjoin it to the side of the second module, fix the received fifth module.

Then we repeat the steps until 30 modules are obtained in each row. We close them in a ring.

The next three rows are added on top of the second, only in a checkerboard pattern.

Slowly and carefully turn the workpiece inside out. It should be shaped like a mug.
We collect the 6th row of 30 modules.

Then, at the base, we choose a place for the swan's head - two modules of the 6th row. To the left and to the right of them we build 12 modules.

This will be the 7th row, on which we form the wings. Each subsequent row must be shortened by 2 modules.

Each wing should have 12 rows.