Craft Santa Claus from whatman paper. DIY Christmas tree toy Santa Claus made of paper (cone). From felt and formiam
Always in anticipation of a magical holiday, the whole family starts making New Year's decorations for green beauty and home. And the most favorite craft is rightfully considered the main symbol of the New Year holiday - Santa Claus.
We suggest you make Santa Claus out of paper. With this simple material You can create real masterpieces with your own hands. You just need to devote a little time to this activity and show all your limitless imagination.
Study our master classes on making Santa Claus with your own hands and you will be able to please your loved ones with unique New Year's gifts, made with soul and attention.
Modular origami Santa Claus - master class
We will need: sheets of A4 paper: of blue color- 14 pieces for 211 modules, white - 13 pieces for 207 modules, Pink colour- 1 sheet for 17 modules.
We divide each sheet into 16 rectangles, from which we will make modules.
Step one. Fold the rectangular sheet in half lengthwise. Using another fold, we outline the middle line.
Step two. We bend the edges of the rectangle folded along the middle, as shown in the photo. Turn the piece over and fold the bottom edges up.
Step three. We fold the corners, bending them over the large triangle, and then bend these corners inward. We bend the resulting figure in half - so we have learned how to make a module. Now, in the same way, we make the required number of modules indicated above from the rest of the paper.
Step four. Let's start making crafts. We take 5 white modules and arrange them as in the photo (we place the top row module with the smaller side up). Next, we assemble a chain of 3 rows of white modules. Each row consists of 25 pieces.
Step five. We close the chain into a ring and turn it over. Next, we perform 3 rows with blue modules. From the seventh row we make a beard. To do this, insert 2 white modules with the smaller side facing out. We insert the remaining blue modules of row 7 as usual.
Step five. In the 8th row we fasten 3 white modules, as usual, with the long side, the remaining modules are blue. With each next row we add one white module on each side of the beard.
Step six. In the 11th row we insert one red module into the middle of the beard - this is the mouth. Row 12 consists of white modules. We put them on blue modules with the smaller side facing out, and on white modules (beard) with the long side, as usual. In the 13th row, opposite the red module, we put on the white one with the long side outward, and 2 pink modules each with the smaller side (see photo).
Step seven. In the 14th row we put on 6 pink modules with the smaller side, and we put on white modules as usual. Row 15 - we put on 17 white modules and 8 pink ones. In the 16th and 17th rows we put on all the white modules with the smaller side outward - this is the hat.
Step eight. The last 18th row consists of blue modules with the smaller side facing out. We assemble hands from 3 white modules and 5 blue ones. Glue the finished eyes and insert the nose (part of a children's mosaic). Santa Claus made from paper using modular origami technique is ready. We hope that after studying the master class, the Snow Maiden, made in the same technique, will appear next to your Santa Claus.
Santa Claus made of paper using origami technique - master class
We will need colored paper and a little patience. We offer you several schemes according to which you can easily make Santa Claus with your own skillful hands. You can hang it on the Christmas tree, decorate a greeting card with it, or give it to friends for the New Year.
DIY Santa Claus from colored paper - master class
We will need: red paper, pink for the face, White paper for the beard, cotton wool, felt-tip pens, scissors and glue.
Operating procedure:
Santa Claus made of colored paper strips - master class
We will need: thick colored paper, white corrugated cardboard, scissors and glue.
Operating procedure:
A few more ideas for creating Santa Claus with your own hands
By using your imagination and using the patterns we have proposed, you can make Santa Claus even from a paper napkin.
A paper cone allows you to make many versions of Santa Claus with your own hands.
And this family of Santa Clauses is made from ordinary toilet paper rolls.
Father Frost and Snow Maiden using the popular modular origami technique.
We hope that our master classes helped you understand the technique of making Santa Claus from paper and encouraged you to be creative. Use a little imagination and create your own kind Grandfather or even several. They will decorate your holiday and create a magical mood!
Diagrams, printouts, drawings
Video master class
Paper figures cut out on windows and walls - vytynankas - will help create a New Year's atmosphere. This selection includes silhouettes of New Year's heroes: Father Frost and Snow Maiden, snowmen, gnomes; Christmas trees, balls and bells, snowflakes, snow-covered houses, deer, bunnies and animals.
The templates can be easily printed on a sheet of white paper, cut out and pasted on the window with soapy water, or fixed in other corners of the New Year's interior. Vytynankas are suitable for decorating cards, posters and other New Year's crafts. But most often, paper protrusions are hung on windows to decorate the room both inside and outside.
With small protrusions you can decorate a window or create a composition on a windowsill or table; with larger stencils you can decorate the walls in a room or on the stage where the New Year's holiday will take place.
Here are the stencils for the protrusions silhouette cut Snow Maiden and Father Frost. You can cut with thin scissors or a stationery knife; you will definitely need a backing board so as not to scratch the table. You can use a plastic cutting board or a piece of linoleum.
Silhouette paper cutout: Christmas tree
You can cut out the Christmas tree using a stencil as a silhouette, or you can make a symmetrical cutout by folding a sheet of paper in half. We make a standing Christmas tree in one of the following ways: glue two symmetrical Christmas trees onto an oval paper stand, or fold each Christmas tree in half and glue it together.
If you cut out two figures from tinted paper using the following stencil, you can connect them and get a beautiful three-dimensional New Year's composition. This composition will look great suspended from the ceiling or a lamp in the center of the room.
Paper protrusions: snowflakes and ballerinas
Snowflakes on windows are also vytynankas, perhaps the most common and popularly loved. Snowflakes can be very different, especially if the master uses all his imagination. You can create a symmetrical snowflake by folding the paper several times. If you try, you can even cut out snowflakes with stars at the ends of the rays.
You will find more in this collection
If you cut out a large enough snowflake, you can place a completely independent composition inside it. For example, New Year's snowman or a snowy forest.
Snowflakes can take the form of light snow ballerinas. To do this, cut out the silhouette of a ballerina separately, put an openwork snowflake on it and hang it by a thread. It turns out very tender air decoration, which can be hung from the ceiling or lamp.
Vytynanki: Christmas balls
Silhouettes of Christmas tree decorations can be cut out either in a symmetrical pattern or using an individual stencil. These decorations can be used to complement a composition on a window, decorate a Christmas tree, or attach them with threads to a chandelier or curtain.
Vytynanki: New Year's bells
We make carved bells using a stencil. If you glue translucent paper, for example, tracing paper, to the inside of the cutout, then such a bell can be used with a backlight effect.
Silhouette cutout: deer, sleigh, cart
Another fabulous New Year's hero is the deer. The delivery of the wizard Father Frost and the Snow Maiden is associated with it. We offer stencils for cutting out deer, carts and sleighs.
Paper cut: snowmen
Charming Snowmen are another character of the New Year holiday. It’s easy to cut out their figures symmetrically, or you can make a “family photo of Snowmen” or a composition with a Christmas tree and children.
Large protrusions look great on a plain curtain and can completely replace complex decorations.
Composition of silhouette clippings with backlight
With openwork paper cutouts you can decorate not only the window, but also create a three-dimensional panorama on the windowsill. It will be especially impressive if you put a garland or small lights inside the box.
Get involved in the design of New Year's decorations - made of paper with your children. This is not only useful for developing imagination, training fine motor skills hands, but it will also give you a lot of pleasure from joint creativity, and then from contemplating the resulting beauty!
What is the name of your favorite winter fairy tale character? children's creativity? This is Santa Claus. He is the main character of crafts that are made in kindergartens and schools, at home and in offices on the eve of the New Year holiday. The basis of such creative works most often it is paper. There are many ways to make Santa Claus out of paper.
Simple applications for little craftsmen
Young children are looking forward to the New Year the most. For them, the New Year's days are a time of miracles and magic. Actively participate The kids are not yet able to prepare for the holiday. Making a small craft will be a memorable event for little ones.
Postcard with applique
A small child also wants to give his loved ones a holiday gift, a simple option for which can be greeting card, made with your own hands. To make it you will need:
- a sheet of white cardboard;
- red and white velvet paper or corrugated cardboard;
- markers;
- cotton wool;
- scissors;
- glue.
Procedure:
- For the manufacture of greeting card A sheet of white cardboard is folded in half along the long side. This blank will be the basis of the craft.
- A fur coat, hat, boots and mittens are cut out of red velvet paper according to a template prepared in advance by an adult assistant.
- The cotton wool is disassembled into small balls. This activity will help your child develop fine motor skills and perseverance.
- A face is drawn on a cardboard blank. Then the fur coat and hat are glued on.
- Cotton balls are placed with glue on the hat and fur coat in the form of an edge. Important! For this work, it is better to use PVA glue, which is applied to small areas with a brush. This will make the craft more neat and reduce glue consumption.
- At the end of making the craft, mittens and boots are glued into place.
If desired, the card can be decorated with glitter and cotton balls, with which depict snow and snowdrifts.
Figured New Year's card
An option for a simple craft - The gift is a silhouette of the head of the main character of the New Year holidays. To create it you need to prepare:
- white cardboard;
- red, black and white paper;
- markers;
- glue;
- scissors.
Creating a postcard begins by cutting out a base from white cardboard. It is an upside-down ice cream cone. Two small black circles and one red circle are cut out of colored paper. bigger size. These will be the eyes and nose, which are glued to the base on the round side of the workpiece. If it is difficult for a child to cut out circles, then you can draw them using felt-tip pens.
A cap is cut out of red paper according to the size of the triangular part of the template and glued to the base. A circle and an oval made of white paper are glued on top, the edges of which are cut in the form of a fringe. The oval is glued to the base of the cap and placed on the sharp end of the cap.
White paper is cut into strips 1 cm wide and 10 cm long. About 20-30 pieces are needed. Glue the strips onto the base in the form of a beard. After drying, each strip screwed onto a pencil.
The result is a beautiful craft with an element of volume, which can be used as a postcard, Christmas tree decoration or interior decoration.
Volume paper crafts
You can make Santa Claus out of paper with your own hands not only in the form of a flat applique, but also give it volume.
Paper strip toy
Easy to make volumetric crafts you will need the following parts:
- 11 strips of red paper measuring 1*10 cm;
- 10 strips of paper of the same color 1*15 cm;
- 1 piece of white paper in the shape of an elongated round arch measuring 2*7 cm;
- 2 oval white parts (mustaches);
- 2 small white ovals (edge of sleeves);
- 1 small red circle (nose);
- 1 cotton ball.
You will also need scissors, a glue stick, a special quilling tool or a rod.
Two balls are assembled from strips of red paper glued together in the form of rings. The large ball will become the body, to which a small ball (head) is attached using glue.
The face and beard are made of white paper. The long part of the arched part is cut with a narrow fringe. It is curled using a quilling tool. On the free side draw eyes and nose. A mustache cut from ovals is glued to the face.
A red strip measuring 1*10 cm is cut in half. Having folded the two parts, cut out the mittens using small scissors. A small white oval is glued to each mitten. The resulting hands are glued at the junction of the spherical parts.
At the end of making the craft, glue a cotton ball in the head and fasten a thread on which the craft is secured on the Christmas tree.
Crafts from scrap materials
Species New Year's crafts a lot of paper. Make the main character winter holidays you can use scrap materials that can be found in every home: a toilet paper roll; cotton wool; red, white and black paper; ready-made eyes and nose. You also need to prepare scissors, PVA glue, and a brush.
Cut out a rectangle from white paper. Its length is equal to the diameter of the sleeve plus 1 cm, and its width should be 1-1.5 cm greater than the height of the base. Rectangular figure coat with glue, do not reach 5-7 mm to the edge, and attach to the base. The free ends of the paper are cut into teeth, covered with glue and folded inside the sleeve.
On white base glue a red rectangle, the length of which is equal to the length of the white figure, and the width is 2/3 of the height of the base. This part is glued to the base. A strip of black paper is glued onto a red background - a belt that is decorated small button.
A semicircle is cut out of red paper, rolled into a cone and glued to the base on the white side. A large cotton ball is attached to the top of it. The junction of the red cap and the white face is covered with small cotton balls.
The eyes and nose are glued to the front of the figure. Cotton balls are glued around them in the shape of a beard.
This craft can be used as Christmas decorations or a detail for interior decoration.
Quilling is a common technique for making paper crafts. It allows you to create beautiful flat and volumetric crafts. To make a figurine of good winter wizard, you will need a minimum set of materials and tools:
- strips of paper red, white, black, beige, pink flowers width 0.7 cm;
- glue;
- scissors;
- ruler with round holes;
- quilling tool.
A tight roll is made from a long strip (two strips of standard length are glued together) of red paper using a rolling tool. Then it is pulled out into a cone shape and coated with glue on the inside.
2 strips of white paper, cut in the form of a fringe. One strip is glued to the bottom of the cone. Another fringe will decorate the cone along its height.
From two standard strips, fold two small cones, cover their bottoms with a fringe of white paper and glue them to the large cone on both sides at an equal distance from the vertical white fringe.
The head of the figurine is assembled from two low cones twisted from beige paper. From one beige strip, cut a part 2 mm wide and twist it into tight roll. It is glued to the center of the ball head. A long pink strip 2 mm wide is cut in half, two rolls are twisted and glued next to the central one. Small eyes are glued above them.
The hat is a cone made of red paper covered with white fringe. It is coated with glue and glued to the head. The pompom for the hat is twisted from a white ribbon, the edges of which are cut with fine fringe. A drop of glue is used to secure it to the paper structure.
The two parts of the figurine are connected to each other using glue.
The base of the craft is a roll of white paper 3 mm wide. Its length depends on the diameter of the large cone. The base is coated with glue and connected to the main part of the toy.
The craft is completed with paper loops, the width of which is 5 mm. They are glued in place of the beard and hair. Two drop-shaped parts are glued as a mustache. They are formed from white strips twisted into a loose roll.
Such a figurine can become part New Year's composition or a Christmas tree toy.
Origami crafts
Origami is a technique of folding various paper shapes. There are many origami techniques. The simplest ones allow even little ones to do simple work. Crafts made using technology modular origami, suitable for older people. Santa Claus made using the origami technique is an original gift To New Year's holidays.
Origami Santa Claus made of paper
Creating a small figurine is a fairly simple process. To work you will need:
- a sheet of single-sided colored paper, red or blue;
- black and red markers.
The assembly diagram for this craft is very simple. The main condition is to use paper with a white back side.
Take a rectangular sheet of paper and place it on the work surface, white side up. Its short side is connected to the long side so that the colored part forms an isosceles triangle. Excess paper is cut off.
The resulting square, white side up, is placed in front of you. The fold line is located vertically. The right and left corners are bent symmetrically to the center line. The folds are carefully ironed. The result is a two-color figure.
The acute angle is bent upward. Its top point is at a distance of 1/3 from the white right angle. For small children, this point can be marked with a simple pencil. To do this, use a ruler to divide the white part of the figure into three equal parts and mark the upper segment with a pencil.
The workpiece is turned over with the colored side up. First, bend the white corner completely towards you. Then it is returned to its original position. Step back 1 cm from the resulting line and repeat the fold. The bent corner should coincide with the center line. A strip 1 cm wide is also folded towards itself.
The figure is turned over again and the free corners are folded along the side line. To secure the craft, the junction of the corners is glued together.
The figure is turned over and the eyes and nose are drawn using felt-tip pens. A beard and mustache can be made from the piece of paper left at the beginning of the work: it is divided into strips and cut into fringes. Paper fringe is glued in place of the beard and mustache.
Modular origami technique
Making crafts from paper triangular modules will require accuracy, patience and attention from the master.
To complete the craft, you will need quite a lot of triangular modules (250 red and white modules and 25 pink triangles). The size of the modules depends on the desired size of the craft. Most often, rectangles measuring 1/16 of an A4 sheet are used.
Detailed diagrams of crafts are widely distributed on the Internet. There you can also find video tutorials on assembling paper modules and figures from them.
The first three rows of the figure are its base. They are assembled from 25 white modules each, closed into a ring and turned inside out.
The fourth row consists of 25 red modules, which are located with the long side forward.
Starting from row 5, which also consists of 25 elements, they begin to make a beard. To do this, assemble a ring of 22 red and 3 three white modules. In the next 4 rows, the number of white modules is increased by one element. However, their total number remains unchanged.
Ring 10 is made of 25 white triangles.
From the 11th to the 14th row the face of the figure is performed. In the 11th ring one red element is added, which is located clearly in the center figures. Scheme of the next row:
- in the center there are two white elements;
- on each side of them there are 2 pink parts, which are inserted with the short side forward;
- the rest of the ring consists of white modules.
Rows 13 and 14 consist of 25 parts, of which 7 and 8 pink parts will be inserted with the short side forward.
Rows 15 to 18 make up the wizard's hat. Rings 15 and 18 are made up of white modules (22 and 9 elements, respectively). Between them are inserted two red rows, assembled from 20 and 18 elements. The technique of reducing the number of modules is described in many master classes on making modular figures.
Hands made of 9 red and one white module are attached to the resulting figure.
The craft is ready. It can be given as a souvenir by treating it with glue and varnish. You can give your child a figure without gluing, which can be taken apart and made into another interesting craft from its elements.
For the New Year holidays, you can sew Father Frost and the Snow Maiden with your own hands from felt. For such crafts you will need templates and patterns used for making paper appliqués.
Paper is an affordable material from which you can make New Year's crafts of any complexity. This work does not require any special knowledge or skills. When creating paper crafts, you need to show creativity, perseverance, patience and accuracy.
Attention, TODAY only!
When preparing for the New Year, there are no trifles. After all, you need to think through everything - decorating your home, holiday menu, as well as gifts for loved ones. Regarding the last point, it is not always necessary to run to the store. You can prepare gifts yourself, involving your children in this. For example, you can make a lot of New Year's crafts. We suggest doing Santa Claus using origami technique. The process of creating it is simple, if you follow the step-by-step photographs of our master classes from Marina and Vasilisa.
Origami Santa Claus, option No. 1
To make Santa Claus we will prepare:
- 2 squares of red single-sided paper;
- glue.
Initially, the squares should be the same size, we took 10 x 10 cm. From one we will make a head with a cap, and the other square will be needed to make the body. Let's start with the head. To do this, we make small folds on both sides.
We bend a small corner from the opposite edge. This will be the top of the cap.
Now we turn the square to the other side. Here you need to bend a third first.
Then we make a symmetrical fold on the right side.
This is how we formed the Santa Claus hat.
The bottom corner needs to be folded up.
Then we make a slight bend in the opposite direction.
We bend the top part of the cap to the side and, if necessary, glue it a little.
To make the body, take another square. We make small folds on it on opposite sides.
Fold in half.
After this, we unfold it, so we have outlined the middle line. First we bend the left edge to it.
Then we make a symmetrical fold on the right side.
We turn the top part in the form of corners.
We bend the top side down. After that with wrong side You can glue it a little.
We connect the two parts together. To do this, we will use glue again.
If you wish, you can draw his eyes and mouth. This craft can become part of a New Year's greeting card.
Paper Santa Claus, option No. 2
To create Santa Claus we will prepare:
- a square sheet of red single-sided paper;
- black marker;
- red felt-tip pen.
When making this craft, it is important to use red paper, which will be white on the reverse side. If you don’t have one, then you can take 2 sheets of red and white. First, fold the red square diagonally.
This is how we outlined the middle fold line, which will become a guide in further work.
You first need to bend the right corner to this line.
After this, we perform a symmetrical fold of the left corner.
For further convenience, let’s slightly rotate the blank of the future Santa Claus.
Now you need to fold the workpiece in half. To do this, bend the bottom corner up, aligning it with the top corner.
The next stage we will form the beard of Santa Claus. To do this, bend the top corner down.
Let's make a small border. To do this, we will again bend the upper part in the form of a narrow strip.
We bend the left protruding part back.
Now we need to do the same with the right side of our workpiece.
Let's take a red marker. We will use it to draw a nose. Using a black marker we will mark the eyes.
Our Santa Claus made from paper using the origami technique is ready.
Such a craft can later become part of a New Year’s greeting card.
Marina's master class on how to make paper Christmas tree, look .
Option No. 3
You will need:
- felt-tip pens (or pencils) black and red,
- square sheet of paper 10 by 10 cm (you can take more or less). The paper should be two-colored - white on one side, red on the other. If you don’t have such paper, you can glue together sheets of white and double-sided red paper.
We need to bend our square diagonally.
Unfold the workpiece and also bend it in half along the second diagonal.
We bend the outermost corner to the top of the workpiece.
We see we have a line drawn, we need to turn the corner back.
We turn back. We see that we have a line; we need to bend a corner to it.
Now we can completely wrap up our lapel along with the corner. You will get it like this.
We work with the bottom of the craft. We bend the bottom corner to the top point.
We make a bend to the bottom point.
Turn over:
We make narrow stripes on the sides.
The same on the opposite side.
We see the middle line and bend both sides towards it.
And the second one.
We take the white parts and make a fold along the red line to the white one.
We bend this strip and make a square.
We do the same on the opposite side.
And a square.
And when we turn the figure over, we can see Santa Claus.
You need to draw his eyes and nose.
From scrap materials
Since this is a “personal” wizard, we will make it from everything that is at hand, namely: from a can of tomato paste, foam plastic, plasticine, scraps of fabric and padding polyester, sushi sticks, “yolks” from Kinder surprises . You will also need thread and a needle, scissors, a line corrector, and red nail polish.
We make boots from “yolks” from Kinder surprises.
We make a body and legs from a can, foam plastic, and plasticine.
We cover the body with padding polyester.
We make “skin” from beige knitwear.
We paint the legs with concealer.
We sew pants.
We try on a mustache and beard from padding polyester and make a nose.
Sew it on.
We cover the boots with fabric.
We insert the legs into the boots.
We cut out the handles.
We sew on the button eyes and put the cap on the head.
And for our wizard to become truly magical, we’ll put a bag on his shoulder. You can put sweets in it.
Every morning the child will take out a new surprise from it.
How to sew Santa Claus
Santa Claus made of cardboard and colored paper
The basis of the future Santa Claus is cardboard. You can use a toilet paper roll - then Santa Claus will turn out to be small, or a paper towel base - then you can make him tall. Or you can make a base from any cardboard the right size, rolling it up into a roll.
What you will need:
- cardboard;
- red paper;
- White paper;
- cotton pads;
- buttons;
- glue;
- scissors.
Lubricate the selected cardboard base with glue.
Wrap it in colored paper, leaving space for the face.
Then from cotton pad cut out the beard.
Glue it to the right place.
We are preparing a hat for Santa Claus. We make a cone out of red paper, securing the ends with glue.
Decorate the cap with the remains of the cotton pad. Glue cotton wool onto the tip of the cap and along its edge.
We grease the inner edge of the cap with glue so that it holds tightly, and we dress it for Santa Claus.
We cut out two mittens from white paper and glue them to the sides.
We draw the face with colored pencils or paints. Then glue the cotton mustache.
We decorate the front of Santa Claus's fur coat with buttons. They can be glued or placed on plasticine. This is such a cute Grandfather Frost!
For the next craft we need red napkins.
You can take any image of Santa Claus, as long as it is the right size.
Or you can download and print our version presented below in A4 format. There are three different sizes, you can choose according to the size of the napkins.
Print out the required quantity.
Cut it out.
Take red napkins.
Fold the napkin as shown in the photo.
We make a cut where Santa Claus's hat is, and insert a corner of the napkin. We roll it out of cotton wool small ball and decorate the hat.
Ours is ready! You can use it to steal the holiday table and surprise your dear guests.
Santa Claus from nylon
DIY Santa Claus from a shell
This craft is very simple, but original. It can be made together with children, then used as decoration or as New Year's gift friends and family.
Let's take the shell.
Cover with white acrylic paint.
The eyes are made of black wool, the nose is made of cotton wool.
We decorate the hat with a bead. We attach all elements using hot glue. Our craft is ready!
DIY Santa Claus
Napkin with Santa Claus
In this master class I will show you how to knit a napkin with an image of Santa Claus.
To knit a stand in the form of a Christmas tree toy, we will need any medium-thick yarn of any dark color (otherwise the applique will blend in with the background color), hook No. 1, white denim yarn, pieces of glue-based felt, a decorative bow, two beads, scissors .
We collect from blue yarn 4 air loops and close them into a ring with a connecting loop.
We knit the first row with single crochet stitches, inserting the tool into the hole of the ring. The number of stitches does not matter, the main thing is that the knitting does not bend. We also close the row with a connecting loop.
We also knit the next rows with single crochets. To prevent the knitting from curling at the edges, it is necessary to periodically make additions. We make additions in each row, but their number will vary depending on the numbering of the row. For example, in the second row we make 3-4 additions, in the third – 4-5 and so on. The number of increases may vary depending on the yarn, so the main thing is to ensure that the knitting does not curl and the increases are at an equal distance from each other.
The total number of rows for the base is 5-6. You can make more if you want the diameter of the stand to be larger.
In the next row, use a thread or a yellow marker to mark 4 points that are equidistant from each other. In this row we also knit single crochets, but at the points marked for us we knit three single crochets in one loop.
We knit the third row in the same way as the second.
After this we will tie the edge of the stand. To do this, we attach white yarn to the edge of the circle and knit the following pattern: 3 chain loops for lifting, 1 double crochet in the same loop, 3 chain loops, “picot” from these three chain loops, 2 double crochets in the same loop.
We repeat the pattern to the end of the row, only instead of 3 chain loops we knit a double crochet.
After this, we knit single crochets in the same way as we did when knitting the warp.
Cut out a “bucket” and a “carrot” from pieces of felt with adhesive backing.
We form eyes from beads, sew all the details and glue them to the base so that we get a snowman.
Our napkin is ready!
How to crochet a Santa Claus applique
Which New Year without the main wizard? Santa Claus is an obligatory guest in every home. Therefore, today we will crochet an applique in the form of Santa Claus!
For knitting we need:
- red, white and peach yarn;
- hook;
- scissors;
- black polymer clay or 2 black beads.
Let's start knitting with an amigurumi ring of 6 loops. To do this, we need to knit 2 ch and in the 2nd of them, from the hook, make 6 sc.. At the beginning of a new row, we form 2 lifting loops, since we will then knit dc.. Then in the next 3 loops we knit 3 dc..
At this stage, change the color of the thread to peach or beige, pink. We do not cut the white thread, but simply lay it behind the loops. And in the remaining 3 loops we knit 3 dc.
We knit 1 ss into the 2nd lifting loop. Change the thread again to a white one and do not cut the peach thread. We knit 2 dc only in white loops.
In the new row we make 1 ch and unfold the knitting. Now we perform 1 sc in each loop along the peach loops. Now change the thread to red. We cut the white thread.
Then we unroll the knitting and make 2 stitches. Next we will knit like this: skip 1 loop and knit 1 dc to the last loop. We don’t knit it, but skip it. Turn around and make 2 ch, then knit 1 decrease and knit to the end, don’t knit the last stitch, turn around and make 1 stitch.
We knit a beard. To do this, use a white thread to join the white loops in the corner. Cast on 3 sts, then knit 4 dc into the same loop. In the next loop we perform 1 sc. We skip the loop and knit 5 dc in a new loop. Next, 2 sc, then skip the loop and again perform 5 dc. We knit like this until the end of the row.
We join the cap with a red thread and tie the edges of the sc. You can add a lurex thread to the main yarn. The cap will shine around the edges.
Now we join the top of the hat with white yarn. We form 3 points. Next we knit 7 unknitted dcs. And now we grab the thread and knit only 2 loops from the hook. Then we grab the thread again and also knit only 2 loops. We knit 2 loops at a time until everything is knitted. This is a pompom.
Now let's make the mustache. We collect a chain of 5 ch. Then we knit 1 sbn, 1 sc, 1 hdc, in the last one we knit 1 sbn and 1 ss. And again ch 6 and repeat the action.
Sew on the antennae and polymer clay making eyes. You can take 2 small beads. Or you can embroider the eyes with black yarn.